Can't Update Airport Firmware

Hi...I am having the same issue that this guy did: https://discussions.apple.com/thread/5652287
There is no button that says "Update" on my mac with Airport Utility 6.3.1 How do I update the utility?? I am running OS 10.8.5
Thanks

a brody...thanks for the reply. Unfortunately this still leads to a dead end. The support article says:
Make sure you are connected to the Internet.
Open AirPort Utility. (Navigate to the /Applications/Utilities folder, to locate it.) AirPort Utility will display a badge to the right of the name of any AirPort base station in your network that has a firmware update available for it.
Select the AirPort base station you want to update.
Click the Update button.
I have no "Update" button...it's just not there. So how can I update if that button is not showing up?

Similar Messages

How can I update the firmware all at once

I'm a tech support in a school, approximately our school has over 500 laptops, how can I update the firmware on all laptops at once?

Apple Configurator is the software you want - and it's free from Apple. However, I'm dubious that firmware can be updated all at once.
http://help.apple.com/configurator/mac/1.4.1/

How can i update modem firmware ?

How can i update modem firmware ?

How to update your iPad
http://support.apple.com/kb/HT4623
You don't get OTA updates on the iPad until you are already running iOS 5 consequently, the Software Update feature will not appear in the settings until you do so.
You just posted from the website that had the instructions in it. Did you read them or just scroll down to the bottom and ask the question?

Can't update superdrive firmware on macbook

system is macbook aluminum 13" (before it was renamed to Pro).
my superdrive makes that annoying sound every time the mac starts, and I can't update the firmware.
the update is on the updates list, but when I try to preform the update it says "your computer's Superdrive is up to date" without actually updating. and still, the update is there on the available updates list.
same thing happned when I manually downloaded the 3.0 firmware from the apple website.

You can try to bypass the hardware check.

No airplay after updating airport firmware

I have three Airport Express units around my house, and I regularly stream to them from my mauc using airplay. Last week I updated the firmware for the AE's and now none of them show up as remote speakers in itunes. Even the little airplay icon is gone from iTunes. any suggestions?

If anyone would like to know how to fix this, I discovered the answer.
I have no idea what IPv6 is and I care not, but apparently now, all of a sudden, Apple makes iTunes talk to Airport Express units using IPv6. However, it didnt bother to make the Airport Express units expect this first, so iTunes can see the Airport Express, but it cant talk to it.
Anyway, I found that you have to manually go into your Mac settings (scary stuff if you are a non technical person like me) and turn off IPv6.
To do this, go to "Finder > Go > Utilities > Terminal"
type
networksetup -setv6off Wi-Fi (hit enter)
Then type
networksetup -setv6off Ethernet (hit enter)
and magically your iTunes will talk to your Airport Express units again.
I presume at some point we will have to undo this as technology moves on and everything uses IPv6, so when that happens go into Terminal again and type
networksetup -setv6automatic Wi-Fi (hit enter)
Then type
networksetup -setv6automatic (hit enter)
Thanks Apple for that.

Can not update iphone firmware using iTunes "The network connection timed out"

Hello,
I can not update the iphone firmware using iTunes.
Messagte displayed
"There was a problem downloading the software fo the iPhone. The network connection timed out.
Also seen stopped error -3259
I have run network connectivity tests from iTunes and All Tests passed.
Can anyone help?
Thank you,
Joan

Did you make sure it was the exact file for your device and the latest version? I just downloaded the latest file for my iPhone4, put it in the folder I mentioned above and it ran the install versus downloading the file. This problem where it times out after downloading is a big Bug within iTunes that has been there ever since IOS 7.0 was released. I wished these apple developers would just fix iTunes. There are a ton of complaints about this issue. I sure miss Steve Jobs running this business, I really feel like it's gone down hill after he left.
I hope this helps!
Regards.

NOKIA 5610 CAN'T UPDATE NEW FIRMWARE 6.60&7.12!!!!...

juz now i 've found tat there r 2 new firmwares available for download .BUT it is only for other country!!my software updater oso shown tat my firmware now(4.18)is the newest..y we can't update our phone's firmware while ppl from other country can????

These questions come up time and time again. Two main factors affect this:
(1) Updates are phased in around the world because there are numerous regional variants, it is not just a single softwarfe for any particular model worldwide. Some regional variations may lag behind others.
(2) If the phone has operator-version software instead of standard Nokia software, Nokia must await the approval of the network before it may release updates.

HT201471 Can I update my firmware to get 4g lte (Saudi Arabia- Mobily)? how?

I have iPad mini, but 4g LTE connection doesn't work, Only 3g work while another device work. Who can I update firmware to get 4g?
Thank you.

Hello designbot,
Welcome to the HP Forums.
It appears that your trying to update the firmware for your Laserjet P1102w via your Mac 10.9 Mavericks. I will do my best to help you with this.
To start I have located a Youtube video for you on installing and setting up the P1102w wireless with Mavericks. I'm linking this just to make sure the printer IS on the wireless network to start with. Setting up the HP LaserJet P1102w Printer in Mac OS X Mavericks.
From that point skip over step 1 in that first document, that you were using. Try enabling webservices, if that fails then you may still have to do step 1 and update the firmware. If it succeeds this should allow you to continue on.
If it does fail, and you still need to update the printers FW, you won't be able to do this safely with Mac 10.9. You do have the option from the information I could find of using the download for Mac OS 10.7, however it's not recommended as it may cause issues. It would be best to use another computer to update the firmware with if it comes down to being required.
I hope that's able to help you out, and answered your question. Thank you for posting on the HP Forums.
I worked on behalf of HP.

Can't update the firmware of my GT70 2OC (Problems with your firmware)

I can't update the last firmware of GT70 2OC, the guide says run file ecwin.bat as administrator and it will automatically choose which folder of (352x & 353x) is the right one for my notebook and it will run automatically.. well it doesn't do that and it show me this
And this is what inside the firmware.zip
So, which folder is the right one for the GT70 2OC ? (352x or 353x) ?
Because I can just run the winflash.exe from anyone of them.
BTW Norton removed "Autoflash.exe" it detected it as a medium risk and bad reputation -_-

Quote from: Omar Os on 28-January-15, 17:41:27
The problem is I think I installed the wrong one last time :\ because they made the same mistake and the same error appeared -_- so I may have installed the wrong one from the 352x or 353x .. and the touch buttons didn't work since then I think.. maybe that's why !
if you are sure that you reflashed to the wrong one,
then reflash to correct one, there are 2 choices only
ie: if your current is .7xx and you have issues some keys not working or other not working stuffs, then reflash to .5xx
and opposite
Quote from: Omar Os on 28-January-15, 18:11:49
BTW Norton removed "Autoflash.exe" it detected it as a medium risk and bad reputation -_-
turn off/disable Norton before flashing

Can't update WRT54GS firmware!

I have a WRT54GS v5.1 with firmware 1.50.5
When I try to upgrade to firmware version 1.52.0 I browse, select the .bin file and click upgrade. The loading bar reaches about 3/4 full, then starts again and reaches about 1/4. Then I get "The connection was reset". I navigate to the admin page again, and the firmware version is unchanged. Any ideas what to try?

In case anyone else has this problem i was able to update the firmware by resetting factory defaults first.

I CAN'T UPDATE N82 Firmware V35.0.002

the ovi suite shows me this message.....
Device recovery Nokia Ovi Suite has lost connection with your device.
Follow these steps to help reconnect your device:
1.Remove USBcable from your device.
2.Restart the device.
3.Re-insert the USB cable. .
Solved!
Go to Solution.

Is that cannot update and whats stopping you .
Or Cannot update as their is no update for your product code .
http://europe.nokia.com/support/download-software/device-software-update/can-i-update
Update checker .
jje

Can't update N95 firmware as USB connection isn't ...

I'm currently trying to update the firmware on my N95. I have installed the latest version and even reinstalled the latest version of the USB cable driver.
But although PC Suite sees and communicates with the phone via the USB cable (Bluetooth is switched off as a connection method), the Nokia Software Updater keeps failing to detect the phone.
I have tried it with and without PC Suite running, I have tried it on different USB ports, I have tried plugging in the cable before the detection process and during it...but it will not detect the phone.
Everything else about the phone seems to be working correctly. Anyone have any ideas?

uninstall the PC Suites & Nokia Connectivity driver. and then download the PC Suite Cleanup from Nokia site. Install & run it.
Reboot computer & re-install the current PC Suites, wait until prompted to to connect whatever you have chosen(Cable or blue tooth, whatever). Download the latest software updater!
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

Can't update Airport Express (original - 802.11g) to firmware 6.3

I have an old Airport Express (original model - 802.11g) that I want to use only for AirTunes over ethernet. The current version of iTunes supports this only with 6.3 firmware in the Airport Express.
I have tried many methods to get the firmware from the 6.0 version that appears "burned in" to the device to 6.3. Whatever I do, the 6.3 firmware update always results in the device reverting back to 6.0. I've tried the following>
-> Standard updating via Airport Utility (5.4.1/MacOS)
-> Manual updating (using "Base Station-> Upload Firmware") to 6.0 and 6.1.1 basebinary
-> Manual updating using standalone firmware updater on Mac
-> Manual updating using standalone firmware updater on Windows
-> Booting Mac in Safe Boot and repeating all above Mac steps
I have tried all the above updating directly from 6.0 -> 6.3 and also updating to 6.1.1 and from there to 6.3.
I have tried all the above using both wireless and direct ethernet connections with the Airport card in my Mac disabled.
No matter what I do, the 6.3 firmware update completes normally, and then the AirPort Express reboots. When it shows up again in AirPort Utility or in the firmware updater program, it shows as running 6.0 firmware (even if it was running 6.1.1 prior to the 6.3 update).
It seems that rather than booting into the newly uploaded 6.3 firmware, the device is instead falling back to some version of 6.0 that must be somewhere in its memory.
One thing I haven't tried is direct uploading of the 6.3 firmware basebinary, which I was unable to find online -- if anyone knows where to find it, please let me know!
I'm at a loss of what to do next, and would appreciate any help folks can provide.
Thanks!
-drcheezie-

I had exactly the same issue. The software you need cannot be downloaded from Apple. You need the new Aiport Utility (sans Admin). Find the CD that came with with AEBS and you'll be good to go. Once installed additional updates can be downloaded.

I can't update the firmware on my CP1525nw

1. Product Name and Number
• HP CP-1525nw
2. Operating System installed (if applicable)
• OSX 10.7.2, printer connected via ethernet cable to my Airport Extreme base station.
3. Error message (if any)
I downloaded the Firmware Updater, unpackaged the .dmg file, ran the program, accept web search for firmware versions, and it crashes after agreeing with the EULA; just before showing the table with the current and available firmware versions. Well, it presents the empty table and then it crashes.
Do I need to run this program while connected via USB cable or something? I can't find any instructions on how to perform the procedure.
Thanks.

I have two CP1525nw's on two different networks.
The firmware updater that HP sent out on 1/5/12 crashes on Macs on both networks while looking for devices.
When I try to use the support link in the email I get a message saying "unable to find any results that match the information you entered".
Free firmware upgrade is required to keep your ePrint and Print Apps service working. Please go to: www.hp.com/go/eprint to download the newest firmware and continue using your ePrint solution. If you do not complete the upgrade, your ePrint and Print Apps may not work after Hewlett-Packard has finished a service upgrade on 1/15/2012. All other product features will continue to work as before. If you have questions, please contact HP Support at http://www.hp.com/support/contacthp.

I can't update airport extreme 1st generation

I can't get my airport extreme 1st generation updated. When I open AirPort Utility on my macbook with maverick it ties to configure the new AirPort but says: This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. I am currently using wifi on a netgear router. I first unpluged the cable from that router and plugged in the AirPort and tried to set it up. Then I unplugged everything and plugged it back in. I just keep getting the same outcome. I am no longer trying to connect to the network but get it updated for use. Is there a solution to this issue?

You need to use....or borrow for a few minutes....a Mac running the Leopard (10.5.x) or Snow Leopard (10.6.x) operating system to update the the firmware on the 1st Gen AirPort Extreme.
Once the device is updated to at least firmware version 7.5.2, you will be able to use AirPort Utility in Mavericks to administer and update the AirPort to higher versions of firmware if you wish.

Can't Update Airport Firmware

Similar Messages

Maybe you are looking for