Can't update Boot Camp from 3.1 to 3.2 in Windows 7 (32-bit)

The update starts to install, then I have to restart to finish updating, but when I do just that and fire up Windows 7 Boot Camp still tells me it's version 3.1. THis happens when I update via Apple Software Update. When I download the installer package it tells me the following: "The function you want to use, is on a network source which is not available." But I downloaded the package! Where else would it be? So until now I am not able to use my Magic Mouse in Windows 7. Is there a workaround for this problem? Thanks in advance.

When I inserted Snow Leopard DVD, the autorun didn't show me an option to install Boot Camp Drivers. Just like the author of this topic, it only showed me 2 options: to Install Mac OS X remotely and to install CD/DVD Sharing.
Then, I've run Windows Explorer, navigated to Snow Leopard DVD, opened Boot Camp folder and runned "setup.exe". The installer opened and Boot Camp 3.0 was installed successfully.
I don't know if it could help you guys with that error message, but after the installation of Windows 7 64bits, I've rebooted my Macbook Pro. Only after the reboot I did the Boot Camp Drivers installation.
You can also try to run the "setup.exe" as Administrator (right-click, Run as administrator).
Also, my Snow Leopard DVD is that grey one with the white "Mac OS X Install DVD" labelled on it.

Similar Messages

Can't Install Boot Camp from Snow Leopard DVD in Windows 7

I have an iMac "Core 2 Duo" 3.06 24-inc (08) running 10.6.2 and Windows 7.
I was able to successfully use the Boot Camp Assistant to partition and install Windows 7 on my iMac. After the installation, I was able to download updates from Windows Updates which included video drivers.
However, when I inserted my Snow Leopard DVD to install Boot Camp 3.0, the Setup.exe only gave me two options: To Install Mac OS X remotely and to install CD/DVD Sharing. I was not presented any options to install Boot Camp.
I did manually navigate the Snow Leopard DVD and found a Boot Camp directory with its own setup.exe and when I clicked on it, it gave me an Installation Error stating "Boot Camp x64 is unsupported on this computer model". I did some research and I found no mention of my iMac listed as an unsupported model.
Any help would be appreciated.

When I inserted Snow Leopard DVD, the autorun didn't show me an option to install Boot Camp Drivers. Just like the author of this topic, it only showed me 2 options: to Install Mac OS X remotely and to install CD/DVD Sharing.
Then, I've run Windows Explorer, navigated to Snow Leopard DVD, opened Boot Camp folder and runned "setup.exe". The installer opened and Boot Camp 3.0 was installed successfully.
I don't know if it could help you guys with that error message, but after the installation of Windows 7 64bits, I've rebooted my Macbook Pro. Only after the reboot I did the Boot Camp Drivers installation.
You can also try to run the "setup.exe" as Administrator (right-click, Run as administrator).
Also, my Snow Leopard DVD is that grey one with the white "Mac OS X Install DVD" labelled on it.

Can't Update Boot Camp Graphics Card Driver

Greetings,
I have an iMac (2011) running 10.7.2
I created a windows partition (windows 7 Ultimate edition) which has played Crysis II, Fallout New Vegas, etc.
I recently bought Battlefield 3 and, when I try to run it, it says that my Graphics Card Drivers are out of date. As a result, the game continuously crashes (despite the iMac easily being able to run the game).
What are my options for updating the drivers? I know that updates are usually in the form of software updates, directly from Apple.
Am I simply screwed until they decide to update their drivers?
A little clarification: I'm trying to install the "catalyst mobility 64-bit utility" for Windows 7 (64-Bit).
When I try to update my driver, through the AMD website it says
"AMD Catalyst Mobility cannot be downloaded due to incompatible hardware/software on your computer. Your computer does not contain a proper graphics adapter"
Any ideas?
iMac, Mac OS X (10.7.2)

Thread with similar problem and solution here https://discussions.apple.com/thread/3363082?tstart=0
Stefan

How can i print photo's from my computor to my photosmart 7515 windows vista 64 bit with updates

How can i print photto's from my computor to my photosmart 7515 hp
OS vista 64 bit

Hi,
You can print from iPhone that means your printer is connected to a wireless network and definitely you can print from your computer which has wireless (or using USB cable).
Now go to the following site to download driver and applications for it and install them on your pc/laptop:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5096...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).

I need to know which update(s) I can apply to help stabalize the system.

Typing the body of the thread message in the title, huh? -)
I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).
Only Apple could hamstring and tie Mac OS to Windows. There isn't any other than whether you can download the drivers into Windows (you can) but Apple puts a block on the installer setup even if your mac does not support it.
Windows 7 needs at least Boot Camp 3.1 and 3.3 is what you should already have. And you are not getting security updates if you don't have at least 10.6.8 as was pointed out. --- you arent using Software Update as you should. And you should backup and clone Mac (and Windows) as well.
You need Mountain Lion to use Boot Camp 5.x which supports Windows 7 & 8 and 64-bit.
I would upgrade to Lion if you can realizing that Rosetta and PowerPC are no longer supported though.
Mac 101: Using Windows on your Mac via Boot Camp
https://support.apple.com/kb/HT1461
http://www.apple.com/support/bootcamp/
Helpful Apple Support Resources (Forum Overview)
Boot Camp Support
Boot Camp Manuals
Boot Camp 5.0 Drivers
http://support.apple.com/kb/DL1638
Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdfcreate a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
https://support.apple.com/kb/HT4569
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf
Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/
Is there a download of the Boot Camp 5 Support Software if I'm not using OS X Mountain Lion v10.8.3?
Yes, you can download the Boot Camp 5 Support Software here.
http://support.apple.com/kb/DL1638
How do I use the Boot Camp 5 Support Software I downloaded from the web page?
The download file is a .zip file. Double click it to uncompress it.
Double-click the Boot Camp disk image.
Copy the Boot Camp and "$WinPEDriver$" folders to the root level of a USB flash drive or hard drive that is formatted with the FAT file system (see question below for steps on how to format).
Install Windows, leaving the flash or hard drive attached to the USB port of your Mac.
Installation of the drivers can take a few minutes. Don't interrupt the installation process. A completion dialog box will appear when everything is installed. Click Finish when the dialog appears.
When your system restarts your Windows 8 installation is done.
Note: If the flash drive or hard drive was not attached when you installed Windows and was inserted after restarting into Windows 8, double-click the Boot Camp folder, then locate and double click the "setup.exe" file to start the installation of the Boot Camp 5 Support Software.
How do I format USB media to the FAT file system?
Use Disk Utility to format a disk to use with a Windows computer. Here's how:
Important: Formatting a disk erases all the files on it. Copy any files you want to save to another disk before formatting the disk.
Open Disk Utility.
Select the disk you want to format for use with Windows computers.
Click Erase, and choose one of the following from the Format pop-up menu:
If the size of the disk is 32 GB or less, choose MS-DOS (FAT).
If the size of the disk is over 32 GB, choose ExFAT.
Type a name for the disk. The maximum length is 11 characters.
Click the Erase button and then click Erase again.
Which versions of Windows are supported with Boot Camp 5?
64-bit versions of Windows 8 and Windows 7 are supported using the Boot Camp 5 Support Software. If you need to use a 32-bit version, you need to use Boot Camp 4 Support Software, and you must use Windows 7. 32-bit versions of Windows 8 are not supported via Boot Camp. For a complete list of Windows OS support, click here.

Can't get Boot Camp to run since updates

I did all the updates as a good Apple user now I find I cannot boot up my Windows disc. When I restart computer holding option key the screen goes white and nothing happens. What should I do?

Something appears to have not installed correctly when the "updates" were installed. Can you tell me which updates did you installed before the issues began? Was Windows already working normally prior to the updates? By the way, which version of windows did you install?
Meanwhile see if you can do the following:
right after you hear the startup sound press and hold the ALT (Option) key until a menu appears on the screen.
It should let you choose between Mac OS and Windows.
Choose Mac OS and press Enter or click the little arrow below it to start into Mac OS.
Once you are in Mac OS choose System Preferences from the Apple Menu and go to Startup Disk. Choose your Mac OS volume there to make your computer auto start from that volume next time.
Close the menu again and you are done.
You can use the Boot Camp assistant to delete your Windows partition, recreate it and reinstall Windows afterwards if the windows installation never worked right in the first place.
Axel F.

I'm trying to update boot camp to 5.1 so i can install windows 8.1 but...

... i don't know how to install the boot camp 5.1.5621 update on to my macbook pro 13-inch 2012.
i read the tutorial but is seems to imply that i should be installing bootcamp on a pc not a mac

The Bootcamp Assistant version should 5.1.x. Please see Boot Camp 5.1: Frequently asked questions about installing Windows 8 - Apple Support and Boot Camp: System requirements for Microsoft Windows operating systems - Apple Support.
The version of Bootcamp Drivers 5.1.5621 supports your Mac
From Boot Camp Support Software 5.1.5621
System Requirements
MacBook Air (11-inch & 13-inch, Mid 2011)
MacBook Air (11-inch & 13-inch, Mid 2012)
MacBook Pro (15-inch & 17-inch, Mid 2010)
MacBook Pro (13-inch, & 15-inch, Early 2011)
MacBook Pro (17-inch, Early 2011)
MacBook Pro (13-inch,15-inch & 17-inch Late 2011)
MacBook Pro (13-inch & 15-inch, Mid 2012)
MacBook Pro (Retina, Mid 2012)
MacBook Pro (Retina, 13-inch, Late 2012)
MacBook Pro (Retina, 13-inch and 15-inch, Early 2013)
Mac Pro (Early 2009)
Mac Pro (Mid 2010)
Mac Pro (Mid 2012)
Mac mini (Mid 2011)
Mac mini (Late 2012)
iMac (27-inch, Mid 2010)
iMac (21.5-inch & 27-inch, Mid 2011)
iMac (21.5-inch & 27-inch, Late 2012)
iMac (21.5-inch) Early 2013
Windows 7, Windows 8, and Windows 8.1, 64 bit

Can't Install Boot Camp 2.1 from Leopard DVD

I've just installed Vista 64-bit on a separate hard drive in my 2007 Mac Pro.
When I run Boot Camp from the Leopard DVD, the installation finishes, but then I get the following 2 errors: "Key Agent (Mac HAL) service failed to start. Verify that you have sufficient privileges to start system services".
After hitting "Finish", Boot Camp is not installed.
What's up with this?

I have the upgrade Snow Leopard DVD, and it won't install 3.0 without a prior version present. Plus, I need 64-bit drivers.

I can't install Boot Camp Windows drivers from Mac OS X v10.6 install DVD

1- I already installed Windows 7 Ultimate 32 bit using Boot Camp Assistant 3.04 on my new Mac Book Pro 13" purchased this week, on a 60 G partition.
2- While in Windows 7 and after inserting my Mac OS X installation DVD, the screen displayed the Auto Play "DVD RW Drive (D:) Windows Support "
box where I selected: "Run setup.exe Published by Apple Inc." and double click on it
3- Then the Screen showed the "Install Assistant" with two options on it instead of the supposed "Welcome to Boot Camp Installer" . The option were:
Remote Install OSX and DVD or CD Sharing.
4- At that point I didn't know how to continue, so I quit the process and now I NEED YOUR ADVICE ON HOW TO.

i tried to download the windows suport SOftware "boot Camp" and it freezes!
No i can install the boot camp, but does not acept the windos 7
It runs all to the end the installation of windows, Then it begins, creating a new user, and when it will start , it CRACHES!
Jesus with the Lion it wasn't so Hard to install it!!

Can't install boot camp(Am in desperate need of help!!!)

Ok, the story, I will try to make it short:
-Got my Imac a month ago. Installed Boot Camp Vista Home Premium 64 Bit. No problem. Ran smooth.
-Later I got VMWare fusion and decided to check it out. Didn't like to to much, but now I can't install Boot Camp.
-When using Boot Camp assistent, it creates my partition(which 200 GB) Fat32! The problem is, when it wants to boot to install. It ejects the Vista installation DVD! No matter what I do.
-*If I hold down the ALT key(option button) during start up*, it will show a grey screen with two options(The Macintosh HD and the Windows Partition). Selecting the Windows partition gives a black screen with an error; *"non-system disk press any key to reboot"* Only problem is that the keyboard was dead or frozen so had to crash the machine.
-Pressing D on start up to enable the *Apple Hardware Test* showed no problems.
-Pressing Alt + Cmd(command) + P + R to *delete the NVRam and PRAM*, did not have any effect. I think I did it right though, because there came a second start up sound.
-Pressing S + Cmd(command) on start up to run *User Single Mode*, with the command; "/sbin/fsck -fy" did not reveal any problems either, except for a weird long messege that kept coming up, and which interupted the line I was writing on several times. The messege was as follows: +":/root# AppleUSBEHCI[0x6e8t000]:: Found a Transaction Past the completion deadline on bus Oxfd, timing out!(Addr: 6EP:4)"+
*Ran a program called Partition Inspector;*
* Report for internal hard disk *
+Current GPT partition table:+
+# Start LBA End LBA Type+
+1 40 409639 EFI System (FAT)+
+2 409640 1531068455 Mac OS X HFS++
+3 1531330600 1953525127 Basic Data+
+Current MBR partition table:+
+# A Start LBA End LBA Type+
+1 1 409639 ee EFI Protective+
+2 409640 1531068455 af Mac OS X HFS++
+3 * 1531330600 1953525127 0c FAT32 (LBA)+
+MBR contents:+
+Boot Code: Unknown, but bootable+
+Partition at LBA 40:+
+Boot Code: None (Non-system disk message)+
+File System: FAT32+
+Listed in GPT as partition 1, type EFI System (FAT)+
+Partition at LBA 409640:+
+Boot Code: None+
+File System: HFS Extended (HFS)
+Listed in GPT as partition 2, type Mac OS X HFS++
+Listed in MBR as partition 2, type af Mac OS X HFS++
+Partition at LBA 1531330600:+
+Boot Code: None (Non-system disk message)+
+File System: FAT32+
+Listed in GPT as partition 3, type Basic Data+
+Listed in MBR as partition 3, type 0c FAT32 (LBA), active+
I don't know what any of this means, but I suspect the Boot Camp partition is the last one. I wonder what "Boot Code: None(Non-system disk message" means!?
*When running diskutil:*
*diskutil list*
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *931.5 Gi disk0
1: EFI 200.0 Mi disk0s1
2: Apple_HFS Macintosh HD 729.9 Gi disk0s2
3: Microsoft Basic Data BOOTCAMP 201.3 Gi disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: FDiskpartitionscheme *931.5 Gi disk1
1: WindowsFAT32 My Book 931.3 Gi disk1s1
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: FRMCxFREDADVD *3.5 Gi disk2
*And when I searched on the boot camp disc specificaly:*
Device Identifier: disk0s3
Device Node: /dev/disk0s3
Part Of Whole: disk0
Device / Media Name: Untitled
Volume Name: BOOTCAMP
Mount Point: /Volumes/BOOTCAMP
File System: MS-DOS FAT32
Partition Type: Microsoft Basic Data
Bootable: Is bootable
Media Type: Generic
Protocol: SATA
SMART Status: Verified
Total Size: 201.3 Gi (216110792704 B) (422091392 512-byte blocks)
Free Space: 201.3 Gi (216109285376 B) (422088448 512-byte blocks)
Read Only: No
Ejectable: No
Whole: No
Internal: Yes
Other things I tried:
-Tried going into Startup disk, to force Vista to install from boot up, but it ejected upon startup anyway.
-Tried rebooting while holding down "C" to force a startup from a CD/DVD. Vista installation DVD still ejected.
-Tried reinstalling Leopard with the Leopard Installation Disc 01, but it also ejecred upon rebooting to install! < This lead me to believe that it's my Superdrive that is messed up, but it plays DVD Movies just fine, and I even just now just burned the Vista installation DVD to my desktop in a .dmg file. So I am not sure if that is it!
-I tried taking a different Windows Vista DVD(Windows Vista 32 Bit Home Premium) to see if it could install from that. It could not, and ejected upon startup like the Leopard and 64 Bit Home Premium Vista Installation DVD!
I am new to Mac, but I am desperate after getting boot camp to work again. I have litterly been trying to figure this out for days, and I can't get it to work. I tried to call Apple but they couldn't help me.:( I could really use your help. I just want it to work.
And speaking of working, I haven't been to work for two days, because I have been home trying to figure this out. It's critical that I get boot camp working. So please, mates, can't you help me.
I simply don't know what to do:(
Cry
-Oil Pedestal

Does [this firmware update|http://www.apple.com/downloads/macosx/apple/firmware_hardware/imacefifir mwareupdate13.html] apply to your machine? If so, putting it on may fix the boot from DVD problem.

Where can I download Boot Camp Assistant 3.3?

The version that comes with a fresh install of Snow Leopard is 3.04. I plan to install Windows 7.

Yes, Boot Camp Assistant for Snow Leopard is stuck at 3.04. But, I went ahead and partitioned the hard drive, installed Windows 7, and then installed Boot Camp from the Snow Leopard DVD. Once installed, Boot Camp can be updated directly from Apple through Apple Software Update. Problem solved.
I'm afraid that Snow Leopard is the end of the line for me on this machine. It ran Lion so hot that I had to downgrade. Might be the ATI graphics on this old MBP that weren't supported well under Lion. Anyway, Windows 7 runs well and is getting regular security updates.

Update Boot Camp 2.2 to 3.0 on Leopard

Hi,
I am having a MacBook Pro with Windows 7 installed and am trying to get an update for boot camp (from 2.2 to 3.0), but am unable to find any such on the site. I am running Mac OSX 10.5.8 (Leopard). Please let me know whether I can make the update and from where can I get it.

Hi Amit,
sorry about the misspelling (sometimes some letters are 'quicker' than others when I type...).
Sadly Microsoft does not allow an in-place upgrade from XP to Windows 7, so you have to start 'fresh' anyway but if needed you can use the Windows Easy Transfer for migrating.
See here http://www.winsupersite.com/win7/win7_upgrade.asp
Or use the procedure described here http://www.winsupersite.com/win7/cleaninstall_upgrademedia.asp
Happy computing and thanks for the star
Stefan

How to update Boot Camp 5

I installed Windows 8 last month with the previous version of Boot Camp.
Now that Bootcamp 5 is out, I want to update Boot Camp but I do not understand how. I've downloaded the files from Apple's website, put them on a FAT formated USB drive, and clicked the setup.exe file within the Bootcamp folder. I get the follwing message: "This app can't run on your PC. To find a different version for your PC, check with the software publisher."
Is there a way to update Boot Camp for my Windows 8? Or must I reinstall Windows 8 with Boot Camp already updated? Can I simply download the Bootcamp files to my desktop and open them from there? What's the need for the USB?
Any help is appreciated.
Thanks.
MBP late 2010, Mac OS Mountain Lion, Windows 8 Pro

Hi iamlucasking,
I recently have this same issue. Can you elaborate on what you did to solve upgrading to Boot Camp 5?

After upgrading to Lion can't get Boot Camp to work! Just get "startup dusk cannot be portioned or restored to a single partition"?

After upgrading to Lion can't get Boot Camp to work! Just get "The startup disk cannot be partitioned or restored to a single partition". Anytone?

This message, and threads like yours got asked daily for over two years, now it is only a couple times a week!!
Is it so hard to follow through? you were to have backup already, clones are best, then erase/format and restore.
Then partition.
Some have been able to use Disk Utility booted from OS X DVD or another drive, and repair the drive.
You have to use Boot Camp Assistant (99.9% anyway) to create and achieve a proper Windows Master Boot Record partition.

Can't Install Boot Camp 3.0 on 64-bit Windows 7 system

I have 64-bit Windows 7 Ultimate running on HD#2 on a Mac Pro 2,1 system (2006). I've installed the Boot Camp 2.0 drivers after I installed Windows, I forget why I needed them, maybe for an old Apple keyboard.
Anyway, I can't install Boot Camp 3.0 from the Snow Leopard DVD - the installation runs to completion, but generates various error messages, one of which says that Boot Camp 3.0 64-bit can't be installed on this system.
I really need 3.1 now because my Magic Mouse won't work, and I can't sync Mobile Me.
Is there a fix or a workaround to upgrade Boot Camp on this system? Should I use Windows Uninstall to get rid of Boot Camp 2.0 first?
If it matters, Windows 7 is the upgrade version from Vista Ultimate.

http://www.apple.com/support/bootcamp/
Click on "Downloads", (underneath the big hard drive icon), scroll down a bit and there is a link for "Boot Camp:Upgrading to Windows 7" and another link for Version 3.1 which you need for 64 bit to work right after 10.6.4(?). I would just try downloading the Boot Camp 64bit 3.1 file and try that first if you already have Window's 64 bit installed.
Don't forget you need a WIRED keyboard AND mouse if you need to reinstall Window's.
Here's another link that is all over the place on which machines and which Windows works and what doesn't...
http://support.apple.com/kb/HT1846
Hope that helped.....

Can't update Boot Camp from 3.1 to 3.2 in Windows 7 (32-bit)

Similar Messages

Maybe you are looking for