Can't update Bootcamp to 2.1

Okay, so I need to install the drivers for windows. This means I need service pack 3. I can't install service pack 3 because I have Bootcamp 2.0. I downloaded the bootcamp 2.1 update, burned it to a CD, then booted up windows to install it. I double click the .exe file to run it and I get the following message after a couple seconds.
"The ordinal 264 could not be located in the dynamic link library msi.dll."
I have no idea what to do now. I did a google search but I only came up with a single result from some French forums. I searched the forums and apple website and found nothing.
Any idea? I burned it while running Mac OS X. Do I need to burn it on a PC running windows for some reason?

Hi,
I do not, but it doesn't matter anyway because none of the USB ports work without the drivers that I can't install because boot camp won't update.
Since you have BootCamp Driver 2.0 installed, the USB ports should work right now.
Or at least I'm pretty sure the USB ports don't work. I can go ahead and test that. If they do then I can probably borrow one from a friend.
If I remember correctly a 'basic' USB driver from Microsoft should even be installed prior to the BootCamp Drivers installation.
Stefan

Similar Messages

Can I update bootcamp video driver (nvidia geforce 9400M to GeForce 332.21 Driver)?

Can I update bootcamp video driver (nvidia geforce 9400M to GeForce 332.21 Driver)? http://www.nvidia.com/Download/Find.aspx?lang=en
If yes, if I installed it will this also affect the video card of osx?
btw, I have macbook late 2008 aluminum unibody running OSX mavericks & a windows 7 ultimate on bootcamp..
TIA!!!

While we all have MacBooks in this forum not all of us use BootCamp. There's a BootCamp Support Community where everybody uses BootCamp. You should also post this question there to increase your chances of getting an answer.
https://discussions.apple.com/community/windows_software/boot_camp

How can i update bootcamp to 3.1 before installing windows 7 if 3.1 is required to install windows 7?

Seems like a catch 22---bootcamp 3.1 is required to install windows 7 but you can't update bootcamp 3.0 to 3.1 unless you're on the windows side. What gives here??

Lousy and incompetent tech writers are to blame.
3.1 drivers are req'd
Apple pushed their 3.0 drivers out before Windows 7 was nailed in place.
The Lion 4.01 drivers avoid the multiple out of date steps.
Snow Leopard 10.6.0 came out in Aug 2009 and the drivers were buggy.
In fact I don't think SL was ready either but that is another topic and issue.
Wish there was a way, but Boot Camp 3.3 is what I use or there is a link to 4.01 set - Windows has nothing to do with Lion, you don't need Lion other than to download drivers standalone driver took 4 minutes for 600MB, people say it takes HOURS or days to get a set of drivers. 600MB is smaller than the recent iOS 5 update, or the whole iTunes + Lion 10.7.2 along with other updates, but they can't get it to "work?"
Windows driver package
Download to Windows, you will be current, no more updates needed and works on any Mac running Windows 7

How can i update bootcamp without windows installed?

Hi,
I have a mid 2010 Macbook Pro and am currently running 10.6.8.
I need to use CATIA for University, so i would like to install Windows 7.
I currently have BootCamp 3.0.4, but it says on the support page that I need BootCamp 4 be able to use Windows 7.
Is it possible to update BootCamp without ever having installed Windows? Can anyone please be so kind and explain the steps I need to be able to install Windows 7?
Thanks a lot!

1. Run Software Update and update OSX.
2. From Boot Camp Support Software 4.0.4033.
System Requirements
MacBook (13-inch, Late 2006)
MacBook (13-inch, Mid 2007)
MacBook (13-inch, Late 2007)
MacBook (13-inch, Early 2008)
MacBook (13-inch, Late 2008)
MacBook (13-inch, Early 2009 & Mid 2009)
MacBook (13-inch, Late 2009) *
MacBook (13-inch, Mid 2010) *
MacBook Air (13-inch, Early 2008)
MacBook Air (13-inch, Late 2008 & Mid 2009)
MacBook Air (11-inch & 13-inch, Late 2010) *
MacBook Pro (15-inch & 17-inch, Core 2 Duo)
MacBook Pro (15-inch & 17-inch, 2.2 & 2.4GHz)
MacBook Pro (15-inch & 17-inch, Early 2008) *
MacBook Pro (15-inch, Late 2008) *
MacBook Pro (17-inch, Early 2009 & Mid 2009) *
MacBook Pro (15-inch, Early 2009) *
MacBook Pro (13-inch and 15-inch, Mid 2009) *
MacBook Pro (13-inch,15-inch, and 17-inch, Mid 2010)
MacBook Pro (13-in, 15-inch, and 17-inch, Early 2011 & Late 2011)
Mac Pro (Mid 2006)
Mac Pro (Early 2008) *
Mac Pro (Early 2009)
Mac Pro (Early 2007)
Mac Pro (Mid 2010)
Mac Pro (15-inch and 17-inch, 2.2 & 2.4GHz)
Mac mini (Mid 2007)
Mac mini (Early 2009 & Late 2009)
Mac mini (Mid 2010) *
iMac (17-inch, Late 2006)
iMac (20-inch, Late 2006)
iMac (24-inch, Late 2006)
iMac (20-inch & 24-inch, Mid 2007)
iMac (20-inch & 24-inch, Early 2008)
iMac (20-inch, Early 2009 & Mid 2009)
iMac (21.5-inch & 27-inch, Late 2009) *
iMac (27-inch, Late 2009) *
iMac (21.5-inch, Mid 2010) *
iMac (27-inch, Mid 2010)
iMac (21.5-inch, Mid 2011 & Late 2011)
iMac (27-inch, Mid 2011)
all these drivers support Windows 7, 32 bit
* drivers that support Windows 7, 32 and 64 bit

Macbook Pro 13" can't update bootcamp

Im a student and my school have installed for me windows 7 in mac. When i want to update the bootcamp, it pop out an error and told to download it manualy, i did that but the error still occurs. Please help me, the update name: "Boot Camp Update for MacBook Pro (13-inch, Mid 2010) (Windows 32 bit)" .

I tried my power adapter with my another MacBook, it works,
But when I use it to charge my MacBook pro, the power light doesn't spark...
I tried another power adapter to charge my MacBook pro, it doesn't work too...
iI'm sure that my battery still got power before I gone out.
I think I really need to send it to apple dealer... (TTmTT)
THanks anyhow. (^人^)

Why can't I update bootcamp software on my Macbook Air 2013?

I'm running windows 8 on my 13" macbook air 2013. Apple sent me a notification of updated bootcamp support software and directions for installation. This web page included a list of the models that are supported by this software and mine is one of them. When I began installing this support software an error message said my computer model isn't supported. I called apple care and they told me it isn't their responsibility to supply windows drivers for people running bootcamp. This sounds fishy and completely wrong. Can someone help, please?

Can you go back and post the web page and actual details (drivers, versions, etc)?
Are you trying to update in Windows and from the Apple Software Update application? manually downloading in Windows? you can use either.
Yes, very fishy. Use to be even worse I think with just how well they are ready to answer and help with Windows on Mac topic.
Use to be the old support pages were to me easy to see and find updates and tech support articles but you can still try there for both your Mac, firmware and model specific, and for Boot Camp.
Also when Mac OS X gets updated, often you download new drivers from within Boot Camp Assistant, too, a 3rd method.
Wasn't clear which method was used.
http://www.apple.com/support/macbookair
http://www.apple.com/support/bootcamp
http://support.apple.com/downloads/

I've installed bootcamp 4.0 on my iMac 27. Everything works superb, but for playing need for speed run or battlefield 3 I need catalyst driver 11.7 or higher. How can I update my graphics? Is there a possibility except waiting for a new bootcamp version?

I've installed bootcamp 4.0 on my iMac 27. Everything works superb, but for playing need for speed run or battlefield 3 I need catalyst driver 11.7 or higher. How can I update my graphics? Is there a possibility except waiting for a new bootcamp version?

But how do you install the drivers if Bootcamp is running interference?
Bottom line, I'ev tried to install three different versions of updated ATI driver sover the last few momnths and on each and every occassion have ended up with the original Bootcamp driver. A number of current games are unplayable on a Mac running Bootcamp as a result.
And if I can't run the software I want, then Bootcamp is as useless as boobs on a bull.

Can AMD update the Catalyst to the newest version for mac(newest:12.1,driver in bootcamp:11.1)?

I just installed the Windows,and I installed some games.
But it said the driver version is a older version(11.1),and it required 11.7 and upper.
So can AMD update the driver?

Latest 12-1 for Windows 7 64bit in Mac Pro I've tried for HD 4870 is not MS approved as shown by Dxdiag info below.
I found that heavy use with game Skyrim, my cooling fans were going louder than with 2011-01-04 V 8.812.0.0 Bootcamp provided driver.
Free to try, Catalyst Manager is a lot more detailed, confusing even and may allow something that will be better for you.
The file (s)aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.d ll,atidxx64.dll,atidxx64.dll,atiumdag,atidxx32,
atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll is not digitally signed, which means that it has not been tested by Microsoft's Windows Hardware Quality Labs (WHQL). You may be able to get a WHQL logo'd driver from the hardware manufacturer.

Unable to update bootcamp in windows 7 enterprise

I'm using Windows 7 Enterprise and bootcamp 3.0 on my MacBook. Problems is I can't update to bootcamp 3.1 manually or by software update. What's wrong

i tried again last night and this time it worked. i didn't do anything different. maybe it's communication with the steam server that's at fault.

Having issues updating Bootcamp drivers from 11.1 to 11.7

having issues updating Bootcamp drivers from 11.1 to 11.7
No matter what driver I have tried thus far
it does not install or update the drivers
Battlefield 3 nags you about having 11.1 and needing to update.
However this game proceeds to load using these drivers (11.1 )
I recently bought NFS THE RUN.
Unlike BF3 the game does not proceed therefore inorder to play this game i would need 11.7 or higher.
can someone please provide the driver that actualy installs and works.
My specs are MBP 15 inch
1 gig GPU ( AMD Radeon 6750m)
8 gigs on Ram
2.2 CPU i7

Take a look around my bookmarks
you are updating AMD, not Boot Camp drivers.
you need to uninstall first.
probably need to update via Device Manager not via Install from AMD
The 99% leaving out import 1% support to make Windows on Mac work 100% seamless

Cannot Update BootCamp Drivers

I'm running windows 7 on my MacBook Pro 2010 with Mac OS X 10.6. First I would like to know if theres anyway to check what version BootCamp drivers I have on my computer. I'm trying to update to the newest version (3.2), but when I run the exe file, it tells me "The BootCamp 3.2 Update requires Boot Camp 3.1 or greater. Please install Boot Camp 3.0 before proceeding with the install of the 3.2 Update"
After that I downloaded the 3.1 Update, It tells me I need the 3.0 Update, which I can't find on the Apple website.
How can I update my Windows Drivers? Thx

The first set of drivers comes from the OSX DVD or Stick while you are IN Windows. After that it is very important to update Windows (with a Firewall and Antivirus) through Windows Updates (Internet Explorer > Tools > Windows Update -OR- Start > Control Panel > Windows Updates). If your Windows Updates are up-to-date, click Start, then Programs, then Apple Software Updates.

Installed Win7 64bit but can't install Bootcamp

Hi all,
Just installed Windows 7 64 bit but can't get Bootcamp to install. Downloaded 3.2 (64) update but that requires 3.1. Downloaded 3.1 (64) update but that requires 3.0. 3.0 won't install from the DVD as it doesn't support the 64 bit Windows 7.
Is there a version I can download or do I have to get rid of that install and do it all again using the 32 bit version?
Stuart

Head to (better yet, copy the contents to a folder)
Navigate to Apple \ Drivers \ Bootcamp64.msi
control click and select Compatibility Mode and choose "Vista"
You just have to force it a little.
May also get a warning from Windows that it isn't compatible or known to cause trouble (true) but install anyway.
AppleHFS feature can be buggy and lead to Bsod.
I keep that renamed and therefore disabled, use Paragon HFS or MacDrive8 instead, commercial but at least they work better.
Apple didn't 'bless' some of us with older EFI32 (trouble booting DVD and other issues) and even mid 2008 iMac had 64-bit ROM and processor at a time when MacBook, MacBook Pro, and Mac Pro all were on the "supported" list for Vista 64-bit, the iMac was not

How can I update my app store account ?

Hi, I have a new Iphone and I wanted to add some applications from apple store.
Unfortunately, I had a message saying that I was using app store on a new device (true) and they needed to check some security thing from my visa card. Unfortunately, I had a new card and do not have the previous one anylonger (the previous one expires in 1 year but had to be cancelled).
Therefore I am blocked and cannot get into my account.
How can I update my bank account and get into the apple store again ?
Thanks
Nadiege

Great, it worked. i could update the account from the laptop (but not from the phone).
Many thanks for such a swift feedback !!

I upgraded from 3gs and want to use my old 3gs as an ipod. how can i update my new apple ID on the 3gs as it still shows a previous one that I had?

I recently upgraded from 3Gs to Iphone4 and want to use my old 3Gs as an ipod. how can i update
the user ID on the 3gs to a new one that I have as it is still showing a previous user ID?

Settings>Store...tap the ID shown...sign out...sign back in with the ID you want to use.

How can i update data in JTable at run time ?

i am trying to build a client/server architecture for conducting quizzes & online tests.. My client will return a object to the server after the test is over, which contains details about the participant, his score and other details. i am putting the incoming object to an Vector. I'll create a new thread each time for the incoming connection and insert the object to the Vector.. Now, please tell me tat, how can i update my table automatically at run time so tat, my table is updated whenever a new object is entered into vector..
here is my code for the table..
public class MyTableModel extends AbstractTableModel {
    String columNames[] = { "ID", "NAME", "COLLEGE", "SCORE", "CELL" };
    /** Creates a new instance of MyTableModel */
    public MyTableModel() {
        Main.List = new Vector();
        SetDefaultData();
    public int getRowCount() {
        return Main.List == null ? 0 : Main.List.size();
    public int getColumnCount() {
        return columNames.length;
    public String getColumnName(int column) {
        return columNames[column];
    public boolean isCellEditable(int row,int col) {
        return false;
    public Object getValueAt(int rowindex, int columnindex) {
        if(rowindex < 0 || rowindex >= getRowCount())
            return "";
        Student row = (Student)Main.List.elementAt(rowindex);
        switch (columnindex)
            case 0 : return row.id;
            case 1 : return row.name;
            case 2 : return row.college;
            case 3 : return row.score;
            case 4 : return row.cell;
        return "";
    public String getTitle() {
        return "Student Table";
    private void SetDefaultData() {
        Main.List.removeAllElements();
        Main.List.addElement(new Student("CS041","Keerthivasan M","MNM",95,"9884326321"));
        Main.List.addElement(new Student("CS012","Arun M","MNM",90,"9884825780"));
        Main.List.addElement(new Student("CS019","Balaji S","MNM",79,"9841742068"));
        Main.List.addElement(new Student("CS005","Anand R","MNM",89,"9884130727"));
        Main.List.addElement(new Student("CS045","Manish J","MNM",55,"9841624625"));
        Main.List.addElement(new Student("CS013","Mangal S","MNM",5,"9841961742"));
}

In the future Swing related questions should be posted in the Swing forum.
how can i update my table automatically at run time so tat, my table is
updated whenever a new object is entered into vector..You don't update the Vector directly. You should be creating a method in your TableModel, called "addRow(...)". This method will do two things:
a) add the Student object to the Vector
b) invoke the fireTableRowsInserted(..) method of AbstractTableModel. This will cause the table to be repainted.

Can't update Bootcamp to 2.1

Similar Messages

Maybe you are looking for