Can't update firmware from 2.0 to current after factory reset.

I'm selling my Apple TV first generation. Did a factory restore to wipe it. Now when checking for update (present firmware is 2.0) it says software is up to date.
Any help?
Thanks

Figured it out. I was logged into my guest network account. Not enough access. Switched to my regular network account and now it works fine.

Similar Messages

Can't update firmware from 7.4.1 to 7.4.2

I have an AirPort Express with 802.11n, working fine. Every once in a while, AirPort Utility pops up and tells me that it found that AirPort Express and "This AirPort Express should be updated to a newer firmware version. Current Version: 7.4.1 Available Version: 7.4.2"
So, I click on Update Firmware... and it seems to do it - meaning that it takes a few minutes, reports success, and restarts the Airport Express.
BUT - when it comes back up, it is still showing that it is running 7.4.1.
What can I do to get 7.4.2 on this AirPort Express? What's wrong?
Thanks!

I write in this thread because I think my situation is related, even if a bit different.
I had many problems with the update of my Airport Express. It started noticing I had to update the firmware to the 7.4.2 and but I've never been able doing it. As it worked fine even with the permament notification I didn't thought it was a great problem.
Then I update my OS from the 10.4.10 to the 10.6 all in one and started having more problems with my Airport Express which was constantly asking to update to the 7.4.2 but it wasn't possible in any way.
I checked this page in the Apple support
http://support.apple.com/kb/HT3486
and I updated the Utility Airport app to the 5.5.1 but it didn't help.
The worst level of problem is that I tried to link another two people (one with a mac 10.5 and one with a pc) to the wireless net and there was not access possibility.
After a reset of the airport the utility app was almost totally blocked and closed the access even from my mac notifing that my WAP password was incorrect.
At this time there are no ways to change this situation.
I'm trying to understand what's the real problem and - if someone has suggestions - how to solve it.

Can't update Firmware from 7.6 to 7.6.1

Utility Connects to device, asks for my password, then says "An Error Occured while trying to access the Apple wireless device. Make sure your network connection is valid. (all other network commands are working fine). Using Airport Extreme as a Bridge through ATT U-Verse

Start with a Factory Reset then....

Can't update songs from itunes to ipod even after it shows ipod updated

Plz help,Itunes show the songs being transfered to ipod
but no new songs or playlists can be found in the ipod, this is happening since last 2 days

Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If does not work
If your iPod shows up in Explorer under 'my computer' try changing the drive letter:
-- Click on Start=>Control Panel=>Admin Tools=>Computer Management=>Disk Management
-- Right-Click on the iPod and select “change drive letter”
-- Choose something further along in the alphabet that is unused (Usually, “M”, “N”, “O” or something similar)
-- Safely eject the iPod
-- Reboot the PC

Why can't I delete music from my iPhone 5c, even after factory resetting?

How can I delete music on my phone 5c?

Awful, awful awful.
Apple ... what were you thinking, and why did you mess up your product so badly?
Why are you screwing over those who are the most devoted, who paid for an extra?
Really. Could this be more frustrating:
You download a great new album!
You want to listen to it on your iPhone!
Oh wait, your iPhone is full. Over capacity. AND YOU SPEND AN HOUR TRYING TO FIGURE OUT HOW TO GET SONGS OFF YOUR IPHONE, reading every forum and every trick to somehow make the product work the way it should. Trying to clear some space for that great new album you just got!
But it still doesn't.
... frustrated, you end up deleting the whole library. Because there seems to be no other way to clear space.
And re-download.
But "use cellular data" is back on, so it downloads when you're out.
And your phone bill is now $300 because you live in Canada and the data caps are so low.
Great. Now I paid over $350 to get my music I already own onto the phone.
At this point, the old USB seems like a better option. Or even the firewire 400. Longing for the days of my 10 gig iPod with a FireWire cable.
Thanks. So much for "positive user experience".
Easy to buy music, hard to get it on to your device. But as long as I've already given you my money, who cares right?!

Where can i get a copy of the recovery disk after factory reset?

Hi, im wondering if anybody can help? i have a macbook thats a few years old and think it runs on 10.6 snow leopard. However i cant find the recovery disk. After sending it in to the shop to have more memory added, full back up onto an external hard drive and full factory resetits asking to be booted from the recovery disk. Can i download OSX 10.8 to drop onto a USB stick and load it onto the macbook? Thanks for any help

Hi Buddypup!
Drivers for your CanoScan N676U and Windows XP are available for download on the Canon website. Use the link below:
http://bit.ly/Y1AfBW
-Please note, you'll want to select the appropriate drop-down options from the drop down menus under "Drivers and Software" to obtain the Windows XP drivers.
Hope this helps!

Zen Micro firmware CIRCLE -Can't update firmware w/out driver, can't update driver w/out firmwa

Hi,
I know lots of peopl are having the same problem. I have a Zen Micro 5Gb. I have previously updated the firmware to the plays for sure (about 2 years ago) and it's been fine.
The device had had the hard dri've replaced after it failed, and I need to reload the firmware. I have all the files, I've read all the FAQ and support I used last time (I keep everything) and my notes from 2 years ago say it was easy.
However. Not now. I figure WMP caused a lot of problems. Right - got that out the way. Fresh installs of XP SP2 is the way to go.
I have also followed the instructions here:
http://http://forums.creative.com/showthread.php?t=3478
But, I keep going round in circles. Can't update firmware without driver, can't update driver without firmware.
Any driver install I try asks me to connect the device to complete the installation, but, it won't recognise the device because there is no firmware. I try to upload the firmware, and it says there is no device (because there is no driver).
I have tried multiple machines, with SP2 installed and only WMP9 (never had WMP0).
I have tried USB , 2, hubs, front ports back ports, again on multiple machines.
I've even used an XP install on VMware on a MAC (This was the closest to success).
On the Mac, The player was recognised even in its flash problem state and I could actually start the firmware update. However, it failed to complete successfully.
Has anyone actually managed to do a firmware update on n old Zen using a 2008 PC? Please help!

If your player had PlaysForSure firmware, you'll need to download a PlaysForSure firmware version. That should resolve your issues since PlaysForSure does not use a Creative driver but rather a nati've Windows driver. But you will need to have WMP0 installed, WMP9 does not support PlaysForSure.

HT1237 I have a iMac8,1. Am needing to update firmware from 10.5.8 to 10.6 or later.

I have an iMac 8,1. Am needing to update firmware from 10.5.8 to at least 10.6 for new printer. Help.

I'm afraid what you've asked about is not firmware. Rather it's OS X - the operating system.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading from Snow Leopard to Lion or Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mavericks- System Requirements
       Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

Can not update firmware on Officejet Pro 8610

Can't update firmware on Officejet Pro 8610, Hp update site shows available firmware update needed, disabled firewall, shut off wireless, run program, window for update appears, but checkbox greyed out. I've talked to HP Tech, He was positive newer firmware was available, I've tried starting in safe mode w/networking, disabled, MS Security essentials turned off,etc. Have Dell Dimension, excellent running, Windows 7 Home Premium, Xfinity cable network modem (very fast), I'm getting frustrated.
Does anybody have a suggestion? Thanks, Jim

Hi @jwhite8150 , and welcome to the HP Forums!
I see you're having issues updating your firmware. I would like to help!
Before we start I have a request.
Press Setup on the front panel of the printer, and select Reports. In the reports menu select Print Status report. On that report, please let me know what firmware version is listed.
Thanks!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Can I update iPhoto from version 8.1.2 to 9 or higher versionfor free?

Can I update iPhoto from version 8.1.2 to 9 or higher versionfor free?

Is your profile signature "Mac OS X (10.6.8)" still current? With that MacOS X version you can upgrade to iPhoto 9.2.x. Only, the iPhoto version 9.5.1 currently sold at the AppStore requires MacOS X 10.9.x. If you you are not running Mavericks, you could try to buy a boxed retail version of iLife '11. That will have a compatible early iPhoto 9.x version.

Can I update firmware on Airport Extreme? If so, how?

Can I update firmware on Airport Extreme? If so, how?

Please check out the following Apple Support article for details on how to update AirPort firmware.

How can I update itunes from just my iphone

I recently purchased a new windows pc. During the update process some tracks were unreadable and I lost all play lists. How can I update itunes from just my iphone to update itunes?

iDevices are not backup devices.
Copy the ENTIRE iTunes folder from the old computer or backup of the old computer to the new computer.

Pacman: Pathname can't be converted from UTF-8 to current locale

Hello Forum,
I am stuck with a problem to which I cannot find any solution after spending half the day trying to solve it:
I have a package wich I installed from AUR -> MyCustomRepository working nicely on my main Arch system. Now I would like to add the package to a livecd using the archiso scripts. When I add it to my packages.both list it downloads fine.
However when installation into chroot should start pacman gives me the following error:
(378/378) loading package files [######################] 100%
error: error while reading package /var/cache/pacman/pkg/pd-extended-0.43.4-1-x86_64.pkg.tar.xz: Pathname can't be converted from UTF-8 to current locale.
error: failed to commit transaction (libarchive error)
Errors occurred, no packages were upgraded.
My System only uses en_US.UTF-8 as locale, so I don't really understand why any conversion should be neccesary.
I read about a similar error somewhere with a reply stating it had to do with packaging. No solution was given however. Can this be the case? And if yes, why do I not have any problems installling in my main system? And more importantly, how can I fix it? i don't really know where to look for the right way now.
I already tried to include a different packages from AUR through my repository, which worked as expected.
the package is pd-extended from AUR with a slight modification to make the .desktop file actually start pdextended.
Any help is greatly appreciated.
Thank you,
Dominik
# Maintainer: <fero dot kiraly at gmail.com>
# Contributor: Dominik Schmidt-Philipp <[email protected]>
pkgname=pd-extended
pkgver=0.43.4
pkgrel=1
pkgdesc="PureData Extended 0.43-4 version"
url="http://puredata.info/"
arch=('i686' 'x86_64' )
license=('BSD')
depends=('libdc1394' 'desktop-file-utils' 'libiec61883' 'fftw' \
'jack' 'tk' 'freeglut' 'libquicktime' 'libdv' 'gsl' 'imagemagick' \
'ftgl' 'libgl' 'hicolor-icon-theme' 'lua51')
makedepends=('dssi' 'git' 'libv4l' 'tcllib' 'subversion' 'swig' 'automake' 'curl')
conflicts=('pdp' 'zexy' 'puredata')
provides=( 'pd-extended' 'pd-gem' 'pdp' 'zexy')
optdepends=('puredata-utils' 'pd-vanilla')
replaces=(pd-extended)
backup=()
options=('!makeflags' '!libtool')
install=pd-extended.install
source=('change_gem_configure_file.patch' 's_inter.c.patch' 'tclpd.Makefile.patch' 'makefile.am.patch')
md5sums=('63a36c51706eaed98611aa4b4bb6ed0d' '8b748d09e8bdf04540ba579d0a6b5318' '463de23166cef2dcf6c7f6989e636213' '5938b12a232004de15f5a383f95cedca' )
build() {
unset CFLAGS
unset LDFLAGS
unset INCLUDES
#downloading pd-extended----------------------------------------------------------
msg "Begin SVN checkout for pd-extended 0.43.4"
cd $srcdir
svn checkout https://pure-data.svn.sourceforge.net/svnroot/pure-data/branches/pd-extended/0.43 $pkgname
msg "SVN checkout done or server timeout"
cd ..
#FIXES -----------------------------------------------------------------------------
# fix #1 lua
#patch $srcdir/$pkgname/externals/loaders/pdlua/src/Makefile ./repair_lua_lib_number.patch
#fix #2 -- GEM configure.ac
patch $srcdir/$pkgname/externals/Gem/configure.ac ./change_gem_configure_file.patch
#fix #3 -- repair wish8.6 (for tcl8.6)
patch $srcdir/$pkgname/pd/src/s_inter.c ./s_inter.c.patch
#fix #4 -- repair version of tcl (8.6)
patch $srcdir/$pkgname/externals/loaders/tclpd/Makefile ./tclpd.Makefile.patch
#fix #5 -- repair binary name to pd-extended (from pd)
#patch $srcdir/$pkgname/packages/Makefile ./program_name.patch
patch $srcdir/$pkgname/pd/src/Makefile.am ./makefile.am.patch
# 64 bit archutecure----------------------------------------------------------------
if [ "$CARCH" = "x86_64" ]; then
# fix -fPIC issue in PDP
sed -e "s|CFLAGS =|CFLAGS = -fPIC|" \
-i $srcdir/$pkgname/externals/pdp/opengl/Makefile.config || return 1
# fix -fPIC issue in pddp
sed -e "s|DEFINES =|DEFINES = -fPIC|" \
-i $srcdir/$pkgname/externals/miXed/Makefile.common || return 1
# setting additional variable
FPIC_FLAG="-fPIC"
else FPIC_FLAG=""
fi
#MAKE --------------------------------------------------------------------------
cd "$srcdir/$pkgname/packages/linux_make" || return 1
make BUILDLAYOUT_DIR=$srcdir/$pkgname/packages \
GEM_EXTRA_CXXFLAGS="$FPIC_FLAG" \
prefix=/usr \
install || return 1
package() {
cp -urv $srcdir/$pkgname/packages/linux_make/build/usr $pkgdir/
mv $pkgdir/usr/share/man/man1/pd.1 $pkgdir/usr/share/man/man1/pdextended.1
rm $pkgdir/usr/share/man/man1/pdreceive.1
rm $pkgdir/usr/share/man/man1/pdsend.1
rm $pkgdir/usr/include/m_pd.h
rm $pkgdir/usr/bin/pd-gui.tcl
cd $srcdir/$pkgname/
# PD License
install -Dm644 pd/LICENSE.txt $pkgdir/usr/share/licenses/pd-extended/LICENSE.txt
cd packages/
install -p linux_make/default.pdextended $pkgdir/usr/lib/pd-extended/
# Gnome menu support
install -d $pkgdir/usr/share/icons/hicolor/128x128/apps
install -p -m0644 linux_make/pd-extended.png $pkgdir/usr/share/icons/hicolor/128x128/apps/
install -d $pkgdir/usr/share/icons/hicolor/48x48/apps
install -p -m0644 linux_make/48x48/pd-extended.png $pkgdir/usr/share/icons/hicolor/48x48/apps/pd-extended.png
install -d $pkgdir/usr/share/applications/
install -p linux_make/pd-extended.desktop $pkgdir/usr/share/applications/
sed -i "s/^Exec=.*/Exec=pdextended/" $pkgdir/usr/share/applications/pd-extended.desktop
# mime
install -d $pkgdir/usr/share/mime/packages/
install -p linux_make/pd-extended.xml $pkgdir/usr/share/mime/packages/
install -d $pkgdir/usr/share/icons/hicolor/128x128/mimetypes
install -p linux_make/text-x-puredata.png $pkgdir/usr/share/icons/hicolor/128x128/mimetypes
# files for /etc
cd "$srcdir/$pkgname"
install -d $pkgdir/etc/bash_completion.d/
install -p scripts/bash_completion/pd $pkgdir/etc/bash_completion.d
# emacs mode for .pd files
install -d $pkgdir/usr/share/emacs/site-lisp/
install -p scripts/pd-mode.el $pkgdir/usr/share/emacs/site-lisp/
# Pd-related scripts
install -p scripts/pd-diff $pkgdir/usr/bin/
install -p scripts/config-switcher.sh $pkgdir/usr/bin/
# vim:set ts=2 sw=2 et:

I chroot into workdir. uncommented en_US.UTF-8 in /etc/locale.gen, run locale-gen and now get this inside the chroot.
[root@dArch2 releng]# chroot work/x86_64/root-image/
[root@dArch2 /]# locale
LANG=en_US.UTF-8
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=
this looks alright to me. Any more suggestions?
It's the first time I use a custom-repo and I set it up only for this purpose. So yes, it's up to date and can be used outside the chroot. Also a different package I put from AUR into my custom-repo installs fine and doesn't give this error.
How else could I test the custom-repo?

HT4623 I still can't update, i get error 3252 every time, after over 500mb is downloaded, not happy to waste all the data i could use for other things

I still can't update, i get error 3252 every time, after over 500mb is downloaded, not happy to waste all the data i could use for other things.
is there another way i can download the update? it just never work, tried multiple time

The most common causes are:
Your antivirus, firewall or router security is blocking access to Apple's servers - try temporarily disabling them - if you have Kaspersky this is definitely the problem
At some time in the past you used this computer to jailbreak, unlock or otherwise hack ANY iPhone, iPod Touch or iPad - if this applies to you your hosts file is corrupt and you will have to edit it and remove any lines that contain "gs.apple.com"

Where can I find detailed instructions for adding updated firmware from my computer to my Canon 6D?

I have downmloaded the latest firmware for my Canon 6D to my computer. I cannot find detailed instructions to add the firmware to my camera. Do I use the USB port and cable from the computer to the camera? It must be simple but I cannot seem to find instructions and I do not want to make a mistake.
thank you

From the download site:
Firmware changes:
Firmware Version 1.1.4 incorporates the following fixes:
1. Fixes a phenomenon in which some images cannot be transferred to mobile devices running the EOS Remote app.
2. Corrects an error in the German language Feature Guide.
3. Corrects an error in the Korean language Feature Guide.
Firmware Version 1.1.4 is for cameras with firmware up to Version 1.1.3. If the camera's firmware is already Version 1.1.4, it is not necessary to update the firmware.
Please note:
After the firmware update has been performed the following setting will be reset to default.
Menu > Custom Function> C.Fn II: Autofocus > AF Microadjustment> 1: All by same amount
When updating the firmware of the camera, please review the instructions thoroughly before you download the firmware.
Q&A:
Preparations for a firmware update:
Windows
After the downloaded compressed file (.zip file) is extracted, a firmware folder is created.
*Extracting the downloaded file:
Right-click the zip file, and then select Extract All to extract the file.
The extracted folder contains the firmware (File name: 6D000114.FIR, File size: 21,276,940 bytes) and instructions on the firmware update procedures (a PDF file in five languages: Japanese, English, French, Spanish, and Simplified Chinese).
Before starting the firmware update operations, please confirm the contents of the download, and carefully read through the firmware update procedures.
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

Can't update firmware from 2.0 to current after factory reset.

Similar Messages

Maybe you are looking for