Can't update or uninstall get error message unknown\components\32a7D634EB632ED11CABB0008...

unknown\components\32a7D634EB632ED11CABB0008.....

Try the following user tip:
"Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\[LongStringOfLettersAndNumbe rs]" error messages when installing iTunes for Windows

Similar Messages

  • Can't update with 7 getting error message not connected to the Internet

    Not sure what's going on with IPAD 2, can't download latest update. Error message telling me I'm not connected to the Internet. Do I need to change some settings!

    Hi,
    but only when I am trying to download Pages and Keynotes
    You can download Pages and Keynote from here.
    http://itunes.apple.com/us/app/id361285480?mt=8
    http://www.apple.com/ipad/features/pages.html
    If you click on: *Vist the app store* on those links, it will open iTunes.
    You can verify the installation in the iTunes window under the Apps tab. Then click the Sync button bottom right side of the iTunes window.
    Carolyn

  • When i attempt to update itunes i get error message, "errors occurred while installing the updates".  What can i do to get the update?

    I cannot download and install I-Tunes update.  I get error message, "Errors occurred while installing the updates.  Choose tools>Download Only".  When I do this I get error message that says, "I Tunes has an invalid signature.  The download has been removed."  What can I do to get update?

    Finally got a response from Apple. They suggested I uninstall Itunes, then download and install the latest version. Worked great and I was able to recover all of my purchases.

  • After update, Itunes can't load. I get error message R6034, attempt to load the C runtime library incorrectly. I have repeatedly removed and reinstalled Itunes and still have the same problem!!!

    After update, Itunes can't load. I get error message R6034, attempt to load the C runtime library incorrectly.
    I also get error code 7 (Windows error 1114), saying itunes wasn't installed correctly. It appears that I am not the only one with this issue. what is wrong with the latest update?? I tried removing Itunes and all of its components and installing it again, but get same errors and i have also tried doing a system restore with the same results

    Doublechecking. Have you also tried the following user tip?
    Troubleshooting issues with iTunes for Windows updates

  • Itunes can't load. I get error message R6034, attempt to load the C runtime library incorrectly

    After update, Itunes can't load. I get error message R6034, attempt to load the C runtime library incorrectly.
    I also get error code 7 (Windows error 1114), saying itunes wasn't installed correctly.
    Tried removing Itunes and installing again, but get same errors

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • HT1925 Can't update iTunes because of error message "iTunes.msi is not a valid installation package for the produce iTunes".  How can I fix this?

    I can't update iTunes because of error message "iTunes.msi is not a valid installation package for the product iTunes". How can this be resolved.  I am using a PC with Windows XP

    If you can, uninstall and reinstall itunes..... Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Hope this helps.

  • I can't open PSE.  Get error message 150:30 and restarting computer doesn't help.  Any suggestions?

    I can't open PSE.  Get error message 150:30 and restarting computer doesn't help.  Any suggestions?

    Please try out the instructions mentioned in this article.
    Thanks!!

  • HT4759 Pc iCloud control panel. Have downloaded and can't log in. Get error message that can't sign in due to server error

    Downloaded pc iCloud control panel. Can't log in. Get error message can't sign in because of a server error. Help

    Hi,
    Are you running any Anti-virus software or do you have your firewall turned on? If so, disable them and try again. If that doesn't work, delete the iCloud account and then sign it back on again.
    Make sure you are running the most current version of the iCloud Control Panel:
    http://support.apple.com/kb/dl1455
    Cheers,
    GB

  • I get error message "unknown error" When trying to log on to itunes via pc, help please!

    I get error message "unknown error" When trying to log on to itunes via pc, help please!

    Hello, trolle56.
    Thank you for the question.  You may find these articles helpful in troubleshooting the error received with the iTunes Store. 
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/ts3297
    Cheers,
    Jason H. 

  • I am trying to download the latest iTunes update.  Keep getting error message stating "The folder path 'My Documents' contains an invalid character".  I can't uninstall iTunes for the same reason.  HELP!

    I am trying to download the latest iTunes update; keep getting error message that says "The folder path 'My Documents' contains an invalid character".  This also happens when I try to uninstall iTunes.  HELP!

    OK, never mind!  I saw another question on the right side that addressed the problem, and it worked perfectly!  Went to Major Geeks' page, downloaded the Windows Installer Cleanup Utility, and was able to reinstall the updated version of iTunes!  This community is super!

  • New MacPro 10.9.4 included Keynote. Worked fine. An update was released August 21. Just downloaded the 6.2.2 update and now get error message "You can't open the application because PowerPC applications are no longer supported". Any ideas?

    New MacPro 10.9.4 purchased three weeks ago included Keynote. App worked fine. New update for Keynote was released August 21. Just downloaded the 6.2.2 update. Tried to launch app and now get error message "You can’t open the application “Keynote.app” because PowerPC applications are no longer supported." Confused as to why it worked prior to update. Nothing else has changed. No issues with recent iMovie, Pages or Numbers updates. Any ideas?

    I tested this:
    Reinstalled Aperture 3.1 from the Trial Installer.
    In some way it seems to be working. But the whole thing is a scary Chimera.
    It can create an Aperture library. I can import and edit images, even in Graphic Converter ias an external editor.
    But the Media Browser does not show the aperture Library that I created.
    The versioning is inconsistent. The library appears as an Aperture 3.4 library in the Finder.  Aperture 3.5 seems to be able to read this library and to upgrade it to 3.5
    The Applications folder is showing the application as version 3.4 and as compatible. Spotlight is showing it as illegal.
    When opening the chimera Aperture, I see plenty of warnings in the Console window:
    An Aperture "Hang" report
    xpcproxy assertion failed
    com.apple.IconServiceAgent: main failed to composite image
    quicklookd: Warning
    and more ... the hang was critical. I had to force quit Aperture more than once.
    So be careful. I would not trust any important Aperture library to this patched application, without testing thoroughly. Be careful with your  precious photos.

  • TS1424 I can't open iTunes. Get error message "the file iTunes library.itl cannot be opened because it was created by a newer version of iTunes"

    I cannot open itunes.  Getting error message: "the file iTunes library.itl cannot be read because it was created by a newer version of iTunes"
    What do I need to do so I dont lose all my loaded music, etc.?
    Thanks

    If you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
    Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
    Not sure if the following site/link will tell the method...
    •Apple - Support - iTunes - install & update:
    http://www.apple.com/support/itunes/install/
    •Troubleshooting iTunes installation on Mac OS X:
    http://support.apple.com/kb/HT2311
    Good luck & happy computing!
    ps: i see you resolved this issue. it's magic!

  • Unable to start bonjour. when uninstalling get error message 32 bit needs 64

    I had trouble loading apple control panel.  kept getting error message at installation that the install is a 32 bit, requires a 64 bit version
    I went to bonjour as instructed but could find 64 bit version.
    I then uninstalled bonljour printer but the install for control panel was the same
    I uninstalled bonjour printer, and found another bonjour that apparently was installed in 2011.  When I tried to unistall that program, I got the same this installer is a 32 bit, requires a 64 bit.  I am unable to unistall bonjour and still cannot install control panel  this is on a dell inspiron tower.

    When deploying, the webservice .lvws file is stored in a the following location:
    32-bit webservices on 64-bit win 7/win vista:
    C:\Windows\SysWOW64\config\systemprofile\Documents\LabVIEW Data\WebServices\Standalone
    64-bit webservices on 64-bit win 7/win vista:
    C:\Windows\system32\config\systemprofile\Documents\LabVIEW Data\WebServices\Standalone
    32-bit webservices on 32-bit win 7/win vista:
    C:\Windows\system32\config\systemprofile\Documents\LabVIEW Data\WebServices\Standalone
    Win XP:
    C:\Documents and Settings\LocalService\My Documents\LabVIEW Data\WebServices\Standalone
    If you do not want your web service to be loaded after subsequent reboots, you can clean up the .lvws files from these locations.
    If you want your web service to be loaded only once after you deploy, you can uncheck the "Deploy as standalone Web Service" checkbox in the "Service Settings" tab of the web services properties dialog. You will need to rebuild your web service after making this change. This will make sure that the web service is NOT built as a standalone service, meaning that it will cease to exist once the instance of the process that deploys the web service exits (LabVIEW). Please make sure that you clean up your existing standalone web service completely before trying to deploy a web service with the name that is not standalone.
    James
    Senior Software Engineer
    Web Technologies
    LabVIEW R&D

  • Updated itunes and getting errors messages: iTunes.exe-Entry Point Not Found

    After updating itunes, I get the message iTunes.exe-Entry Point Not Found. The procedure entry point AVCFPlayerEnableHardwareAcceleratedVideoDecoderKey could not be located in the dynamic library AVFoundationCF.dll.
    Then another error message tells me: iTunes not installed correctly. Please reinstall.  Error 7 (Windows error 127). I've tried to repair which looks successful until I try the desktop shortcut as well as going into the exe file in program files. Still the same message.  Operating a windows XP service pack 3 with 32 bit. Help would be most appreciated.--No problems with itunes until this recent update.

    iTunes.exe-Entry Point Not Found. The procedure entry point AVCFPlayerEnableHardwareAcceleratedVideoDecoderKey could not be located in the dynamic library AVFoundationCF.dll.
    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

  • Can't open Lightroom.  Getting Error message:  Trying to open Lightroom.  Get ERROR message

    I can't open my Lightroom.  I keep on getting the message:
    Trying to open Lightroom.  Get ERROR message:
    Lightroom encountered an error when reading from its preview cache and needs to quit.
    Lightroom will attempt to fix this problem the next time it launches.
    This has happened before. 
    I also can't get my Plug-ins (like Topaz and onOne) to work within Photoshop CC and Lightroom.
    Not the first time this has happened.
    Any suggestions?

    I apologize. I should've told you to delete the folder with the same name as your catalog. So you want to delete the folder named Lightroom 5 Catalog Previews.lrdata.

Maybe you are looking for

  • Invoice reference

    In credit memo entry how do you get a list of invoice for which the corresponding credit memo has to be made. Normally when we click F4 in the invoice reference  field we get a message input list is not available. I want to get the list of invoice wh

  • Ext. HD error - "The disk you inserted was not readable by this computer"

    Hello world. I'm really stressed here. Whenever I insert my FireWire WD external HD, the "The disk you inserted was not readable by this computer" pops up, followed by three options; Ignore, Eject, Initiate. - DiskUtility doesn't work (Repair buttons

  • Asset - Equipment Synchronization (Object type)

    Hi Experts, In our system, Asset-Equipment synchronization is activated. An equipment will be automatically created upon creation of an Asset. Asset Class(Eg: 10006) is sync with Equipment category(eg : M) and equipment are created automatically. A s

  • Bulding a diffucult report..need some help

    hello, I have been having a hard time trying to produce a report with the following requirements: The report is a billing report. I hope you can help or point me in the right direction. report requirements: out_date date_in Bill 2/23 3/2 3/1 to 3/2 3

  • Where do i can get the service order attachment details

    Hi Guys, I am developing a report, which it needs to delete the attachments for the particular service order, in which details i can the service order attachment details. Thanks, Gourisankar.