Can't update Solution Manager(7.1) SAP BASIS - conflict in update packages

When I try to update SAP_BASIS (702) with Service pack SP13 to SP14 (using SAPKB70214), a conflict arises. SPAM claims that the package requires pre-installation SAPKITL711 (Pack ST 710). However, the search for SAP Software Download Center showed that this package does not exist in nature, and the last packet is numbered as SAPKITL710 (ST 710: SP 0010)
Where am I wrong? Perhaps SP14 and SP15 SAP_BASIS (702) generally are not intended for installation?

Hello Michael,
SAP claims at https://service.sap.com/sp-stacks that SP11 for ST should be at 12 of march
But they also claims this :
Disclaimer:
Be aware that the information contained in this schedule is subject to change. SAP does not guarantee the availability of an SP Stack on the specified date.
The SP Stack frequency of a product version may change during its lifecycle. The distribution of SP Stacks throughout the year may also vary from one year to another.
BR,
K.

Similar Messages

Installing License in Solution Manager 4.0 - SAP BASIS 7.0

Hi, I installed SAP Solution Manager, I request my unlimited license at SAP Marketplace, they send me the file, however in slicense transaction - New licenses I load my file and no errors show me. However when finish load of file, license status is not active (green) but it is red and show me as "Not yet valid". I restart my server and delete temporary license and nothing happend, message is the same. Is important know than licenses in new version (SAP BASIS 7.0) and ECC 6.0, installation is not equal than old version. The file with the key must be imported from slicense transaction - new license and no write directly to slicense transaction fields.
Thanks.

Obviously you have to upgrade SAPKW70012 first as its the prerequisite of Basis support pack. So just import this support pack then you can only continue for Basis patch.
There is a sequence in which patch can be imported, when you apply any patch it shows the prereuisites of that patch so just follow the same.
Regards
Subhash

Can I install Solution Manager 7.0 in Window Server 2008 R2 Enterprise ed.?

Hi, SDN experts.
I am trying to install Solution Manager 7.0 in in Window Server 2008 R2?
I checked the the software requirement for SAP Solution Manager 7.0, it only mentioned Window Server 2003 and 2008 enterprise edition.
I am trying to install Solution Manager 7.0 in in Window Server 2008 R2 enterprise edition?
When I ran the Solution Manager Master Installer, the Pre-requisite Checker gave a warning message saying that it detected incompatible server version, that the server version is Windows NT 6.1 (Build 7601: Service Pack 1) (I guess it meant Window Server 2008 R2).
=======
The following Windows operating system version is supported: Windows Server 2003 (i.e. Version 5.2) and Windows Server 2008 (i.e. Version 6.0).
Current Windows version: Version 6.1, Service Pack 1.0, productive type: Server.
You can check the current version of you operating system by runningu2026u2026..
========
Can I actually install Solution Manager 7.0 in Window Server 2008 R2? Will this cause problem during the installation/post-installation if I ignore this message?
Thanks,
KC

Hi,
I think it is not straight forward to install SAP Solution Manager 7.0 in MS Window Server 2008 R2.
I am installing Solution Manager 7.0 , the installation encountered error on Create Java Users step (Phase 31 of 44). When I login to SAP solution Manager system through SAP GUI. I encountered this error:
"OS release Windows NT 6.1 7601 Service Pack 1 4x AMD64 Level 6 (Mod 44 Step 2) is not supported with this kernel (700)'
I found that it is because I am installing SAP Solution Manger 7.0 in MS Window Server 2008 R2, which the existing kernel version does not support.
Do you know which kernel I should install?
I browsed in:
SAP Application Components" SAP SOLUTION MANAGER" SAP SOLUTION MANAGER 7.0" Entry by Component" Solution Manager ABAP Stack
SAP KERNEL 7.00 64-BIT UNICODE --> Windows Server on x64 64bit -->MS SQL SERVER
I downloaded:
SAPEXEDB_291-20001361.SAR Kernel Part II (for Basis 7.00) 291
Is this the right Kernel patch I should use?
If it is the right kernel patch file, how do I apply the latest kernel to existing Solution Manager system? Can you give me some guidance on this?
Thanks,
KC

SAP Solution Manager Adapter for SAP Quality Center by HP (ST-QCA)

Hello Folks,
I am configuring Solution Manager, and the current activity asks to download to add-ons that I can't find in the Marketplace - they are required to activate Solution Manager Enhancements:
SAP Solution Manager Adapter for SAP Quality Center by HP (software component: ST-QCA)
SAP Support Enablement package (software component: ST-SEP)
Does anyone know where to get those components?
Thanks a lot,
Marco

Hi Ravindra babu/ Murali:
I have one very quick doubt and would be really glad if you can help clarify.
As per documentation from SAP and also IMG screens etc. it seems like 'a project' in SolMan will hand-shake with 'a project' in QC.
Can I therefore assume that if there is only one instance of SolMan (productive) and one QC server alone (again, productive), any number of trials I carry out between SolMan project and QC project will not spill over into other projects in these two systems and thus have no impact whatsoever at server level.
The reason for my asking this - in my project, Testing has started using QC in a standalone mode already. We have just one server. If I have to carry out any tests/ demo between SolMan and QC, it shouldn't impact other 'standalone' projects being done in QC.
Regards,
Srini

Solution Manager and a SAP GRC AC 5.3

Hello,
We have a Solution Manager and a SAP GRC AC 5.3
We ant to know if somebody knows how to connect or the architecture os infrastructure to connect the Solution MAnager with the GRC.
What we have to do is... If someone in the Solman does a user or role request, the SAP GRC gets this request and begins the necesary workflows.
I need help
Best regards.
Pablo Mortera.

Hi,
As per your requirement, you want that the request should be automatically trigerred from Solman to GRC.
In GRC, CUP is used to provision the user and roles. The request can directly be created in CUP by a functionality known as HR triggers however this requires SAP_HR module which is not present in Solman.
So it is not possible to create request directly from solman. User can login to CUP and then can create the request for his login.
Regards,
Shweta

Updating Solution Manager - Charm Non-regression Tests

Dear Gurus,
we plan to update Solution Manager from SP18 to SP25.
One of our concerns is related to Charm. Actually, due to code changes in the Charm workflow, we'd like to ensure there won't be any regression. what would you suggest?
1) Adding additional mandants to the sandbox system (one for every system in the transport route)
2) Creating virtual systems in TMS
Sincerly,
Ludovic

I will try to clarify the issue.
As regression test, we would like to simulate a Charm workflow within the sandbox environment. The original Workflow is based on validation steps accross DEV - INT - QUA - PPD - PRD.
Question is : can I define virtual systems in TDM/CHARM like I would do to bypass a system during transports in order to simulate our complete landscape?
Kind Regards,
Ludovic

Solution Manager vs Netweaver vs BASIS

Hi Everybody.
I have 5 year of experience with Java and J2EE Technologies and now my current company want me to join BASIS team. Is this the right move for me to go?
My first question is where to start to learn BASIS. reading material and so.
Then what is the relation between Solution Manager vs Netweaver vs BASIS.
and what are under my responsibility.
In my company SAP ECC6 is implementing and schedule to be complete in July 2008.

https://www.sdn.sap.com isthe best source to learn where you can relay.
Also u can learn on the link of ur companies sapmarket place weblink.
Thanks
Navanath Dhavale

SAP SOLUTION MANAGER 7.0 EHP 1 - need to update the stack?

I'm trying to understand the enhancement pack concept and what I need to do to update our solution manager.
currently we are on:
SAP SOLUTION MANAGER 7.0 EHP 1 - Stack 21
ST-ICO 150_700: patch 0022
CPRXRPM 400: patch 0015
CRMUIF 500: patch 0003
PI_BASIS Support Package 04 for 7.01
BI_CONT 704: Support Package 04
ABA Support Package 04 for 7.01
Basis Support Package 04 for 7.01
ST 400: Patch 0021, CRT for SAPKU50015
ST-SER 701_2008_2: patch 0005
ST-PI 2008_1_700: SP 0001
SAP_AP 700: Support Package 0016
Support Package 15 for SAP CRM 5.0
BW Support Package 04 for 7.01
I understand the current stack is 24. Is this also EHP 1 ?
I believe I need to update to stack 24 in order to stay current. Is that correct?
In addition, EarlyWatch indicates that the ST-A/PI is missing. Actually it exists but is not the current package. I believe by updating the stack, the ST-A/PI will also be updated. Is this correct?
Should I update the stack to 24? or just update the ST-A/PI?
Thanks
Laurie McGinley

Hi,
>
> I understand the current stack is 24. Is this also EHP 1 ?
>
Yes, check SAP note 1244225.
> I believe I need to update to stack 24 in order to stay current. Is that correct?
>
Yes
> In addition, EarlyWatch indicates that the ST-A/PI is missing. Actually it exists but is not the current package. I believe by >updating the stack, the ST-A/PI will also be updated. Is this correct?
>
Yes. Current support package for ST-A/PI is ST-A/PI 01M_CRM570.
> Should I update the stack to 24? or just update the ST-A/PI?
SAP always suggest to be on current support package. But I always prefer to upgrade to n-1 strategy.
Thanks
Sunny

JSPM error while updating solution Manager

Hi All,
I am getting following error in JSPM while updating SP14 solution manager to SP17 .
Jan 10, 2010 1:03:35 AM [Info]: Dialog type InfoText with dialog name step displays dialog text <html>Could not obtain MBean server connection with host: hostname, p4Port: 50000 and username: J2EE_ADMIN.
com.sap.engine.services.jmx.exception.JmxConnectorException: Unable to connect to connector server.
com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.interface
s.cross.DestinationException: cannot establish connection with any of the available instances
        Nested exceptions are:
        com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection on host: x.x.x.x and port: 50000
com.sap.engine.interfaces.cross.DestinationException: cannot establish connection with any of the available instances
        Nested exceptions are:
        com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection on host: x.x.x.x and port: 50000
Anyidea how I can fix it ?
Thanks,
Suman

Hi Suman,
Usually the p4port should be 5<xx>04 where xx is the instance number. But the error says p4port is 50000.
Login to Visual Admin and check the p4provider service under dispatcher node. If the port is 50000 then change it to 50004.
Then try again.
Cheers.....,
Raghu

Can't Install Solution Manager on Suse Linux Enterprise Server 10 - JAVA

Hello everyone!
I've been trying to complete the pre-requisites in order to install Solution Manager SR2 on Suse Linux Enterprise Server 10 x64 - SP1.
There's only one last condition that I haven't met, and it's the Java Runtime Environment version...
I checked the recommended note 867110 and it says that i need to have installed the J2SDK 1.4.2_08.
SLES10 includes the 1.4.2_13, so I had to uninstall it, and download the right version from Sun Microsystem's official webpage.
When I installed the version 1.4.2_08, i'm not able to run SAPINST because there's no Java Runtime Environment running on the server.
I started to investigate and I found in some forums [NOT EXPLICITLY] that there's no port for J2SDK 1.4.2_08 on x64 linux systems.
I can't believe this is true because SLES10 is recommended by SAP to install Solution Manager, so I hope somebody can help me on this.
My specific question is: Does anybody know if is true that J2SDK 1.4.2_08 is NOT COMPATIBLE with x64 Linux?
In case of being true, is there any way to be able to run SAPINST ? because if I enable the version SLES brings built in, i'm able to run the SAPINST but it detects that i'm not running version 1.4.2_08 and doesn't allow me to continue installation.
I hope somebody can help me soon...
Regards!

> SAPINST_JRE_HOME=/opt/IBMJava2-s390-142/jre/bin:$PATH
>
> JAVA_HOME=/opt/IBMJava2-s390-142/jre/bin:$PATH
You downloaded the wrong version - the one you have is for Z-Linux(Linux running on the mainframe - not for x64).
You need to download the x86_64 (or AMD64) version.
Install the correct one and try on a new console:
export JAVA_HOME=/opt/IBMJava2-amd64-142
export PATH=$JAVA_HOME/bin:$PATH
Then execute
java -fullversion
and it should show the correct version.
Markus

Solution Manager Installation Error "SAP SOLUTION MANAGER 7.0 EHP 1"

I am new to SAP and currently trying to install SOLMAN 7.0 EHP 1 on Windows Server 2008 R2. I have read the documentation also. For JDK I have used "j2sdkfb-1_4_2_24-rev-b06-windows-amd64.exe" which looks to be working fine.
The installation process runs fine until it hits "Start Instance" the message on the bottom says "Starting instance xxx/DVEBMGSOO" (where xxx is my sid) and then its times out after 10 minute. After timing out I get the following error on the window.
An error occurred while processing option SAP Solution Manager 7.0 EhP1 > SAP Systems > Oracle > Central System > Central System( Last error reported by the step: ABAP processes of instance ORC/DVEBMGS00 ABAP: UNKNOWN did not start after 10:00 minutes. Giving up.). You can now:
Choose Retry to repeat the current step.
Choose Log Files to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS.
Though the installation steps are not fully completed but I do see SAP management Console and when I open it I see two process running "msg_server.exe" & "igswd.exe" The process dispwork.EXE starts in the beginning and then stops and stays stopped. I tried restarting all the process again but only tow of them starts and the process "dispwork.EXE" starts but then stops again. I also did a NEW installation considering a file could have been corrupted or something else but the installation process stops and the same place. I am sure ppl have installed SOLMAN on windows 2008 R2 and this error seems common to me. Please assist. Any tips would be nice.
Edited by: amirsd on Aug 3, 2011 5:53 PM

Hi,
Please check the below
1) ip/host entries should be in /etc/hosts
2) patch the latest kernel for 2008 R2
and re run installation
Regards,
Ram

Solution manager, SLD and SAP MC

Hello,
It seems that both System landscape directory and SAP management console have some overlapping features. The services can be started or stopped in both. Is it true? Does anyone know the difference between these 2 and where does Solution manager fit in?
Thanks
Shaiikil

We can stop, start SAP services from NWA. Now we cannot say Netweaver, NWA and MMC are similar...
MMC is a tool/enviroment provided by microsoft for starting stopping services, managing user rights, security settings, policies and so on...
this can never be compared with SAP Environment for similarities.
Feel free to revert back.
-=-Ragu

Accessing Solution Manager CHARM Via SAP CRM

Hi
Is it possible to accces charm of soultion manager via SAP CRM
If so how does it work and documentation are welcomed
Thanks in advance
R-K

option 1
> customise sap crm to cater for the external product in terms of what solution manager charm / service is currently doing for sap componet
. Create all the status for this products eg: transport is in Dev for product A, Transprot is in QA for product A or product is in Prod then test and close the call
> access solution manager from crm (NB: work center / service desk can be accessed through crm) the problem is WE NOT SURE OF CHARM
> also customise crm to cater for IT related issues like broken laptop or netowrk cable not working or IT related query,
Option 2
> intergrate the external product to solution manager o
> Customise CHARM / service desk to cater for this external product in solution manager the way it does for sap components / ibase

Can i use Solution manager ADS for ECC6 ABAP

Dear All,
We have landscape of ECC6 ABAP (Dev, Qua, Prd), can i install and configure ADS on Solution manager(ABAP+JAVA) and connect all Dev , qua and prd to same solution manger for Adobe interactive forms. is it possible ?
for production environment?.
Regards
Vinay

Hello!
This was already discussed. E.g. here ADS install in Solution Manager.
While it is technically possible (to connect several systems to one ADS) it is not recommended for productive environment for some reasons (security, stability, performance and easy of maintenance). I say you can use you ADS on SolMan for DEV, QAS and number of your training/demo systems, but install separate J2EE with ADS instance (better on separate server) for productive use. You can then check ADS updates/patches on SolMan first without breaking productive system and only then (if successful) update productive.
Regards,
Petr Perstnev

Can I install Solution Manager on Netweaver 04?

Hi,
I am very new to the Basis world. I'm trying to learn installations and figure out where SAP components can be installed.
I have just recently installed a Netweaver 04 environment with the SAP Abap instance (Basis 6.40). Is it possible to now install Solution Manager on it or is solution manager 3.2 only compatible with Web App server 6.20?
Any explanation as to Solution Manager installation from scratch will be helpful.
Thank you
Amina

hi amina
rite now solution manager and netweaver can be integrated with solution manager diagnostics there is procedure
the following link will help u to learn more about it
https://websmp201.sap-ag.de/~form/sapnet?_SCENARIO=01100035870000000202&_SHORTKEY=01100035870000634682&
note: award helpful answers
regards
janak mehta

Can't update Solution Manager(7.1) SAP BASIS - conflict in update packages

Similar Messages

Maybe you are looking for