Can't update the Nike + iPod voice kit

Every time my nano (4Gb, second generation, software version 1.1.3) is connected to my iMac, iTunes 7.2 pop the message that a new Nike + iPod voice kit is available. When I click Install, nothing happens, no download or installation process begins. iTunes starts syncing contacts and calendars on the nano and that's it. I tried to update the voice kit with iTunes 7.1 to no avail either. Can someone advise some help? Thank you.

Thanks GFF. I have followed the instructions on the link you provided. I was then able to download the voice kit but it doesn't get installed correctly on the nano. Each time I connect the nano to my iMac, ITunes keeps popping the installation message and there's no French voices on the nano when using the Nike + iPod kit.
Well, running with Lance's voice is better than nothing but I would prefer to hear feedback in my native tongue...

Similar Messages

  • I have a 7th generation nano, and am interested in the Nike   Ipod sport kit.  However, it looks like the kit only works with older nanos with the 30 pin connector.  What kit or what accessory do I need to utilize the Nike   ipod sport kit fuctionality?

    I have a 7th generation nano, and am interested in the Nike + Ipod sport kit.  However, it looks like the kit has a 30 pin connector on the receiver and the 7th gen nano is a lightning connector.  Not sure if the kit will work.  What kit or what accessories do I need to utilize the Nike + ipod sport kit fuctionality in the 7th gen nano?  Do I just need a separate sensor and/or a heart rate monitor? Or is there a kit available for 7th gen nanos?

    Hey SeanW89,
    Thanks for the question. The iPod nano 7th generation has bluetooth functionality that can connect to the Nike+ sensor. You do not need to purchase the USB kit, but rather just the sensor itself:
    Nike + iPod Sensor - Apple Store (U.S.)
    http://store.apple.com/us/product/MA368LL/E/nike-ipod-sensor
    iPod nano (7th generation): Frequently used features
    http://support.apple.com/kb/HT5470
    Connect to Bluetooth accessories
    You can connect your iPod nano to compatible Bluetooth headsets and other accessories, including some hands-free systems in newer cars. You can also connect to a Nike+ sensor or a Bluetooth heart-rate monitor. iPod nano supports A2DP for audio streaming and AVRCP for controlling playback on Bluetooth devices.
    Note: FM radio will not play through a Bluetooth accessory.
    Thanks,
    Matt M.

  • My new car says my 1990's ipod is unsupported, can I update the old ipod?

    my 2013 honda cr-v says my older ipod is unsupported, can I update the old ipod or do need to buy a newer ipod?

    You can't merge accounts or copy content to a different account, so anything that you bought or downloaded via the old account is tied to that account - so any updates that those apps get you will only be able to download via that account. You can change which account is logged in on the iPad via Settings > Store

  • Do I Need to Purchase the Nike+ Ipod Sport Kit or Just the Nike Sensor

    I'm a newbie to all of this. I am considering purchasing either the new Ipod Nano or the updated Ipod Touch (32). Would I need to purchase the Nike Sensor Kit if I purchase the Ipod touch or just the Nike sensor to insert in the shoe? Thanks in advance to whomever can provide guidance on this issue.

    I can speak for a new iPod touch and tell you that you only need the sensor. That's what I have and I love it. I'm really enjoying Nike's website and the history it builds.
    From what I understand about the new nano, it has some sort of pedometer built right in so you can get a calculation of steps all by itself. You can also add the nike sensor to get more information on your walk/run, I'm just not certain if its the whole kit you need or just the sensor in that instance.

  • IPod Classic and Nike + iPod Sport Kit

    Will an iPod Classic work for the Nike + iPod Sport Kit?
    Why does the Nike + iPod Sport Kit only work for iPod Nano and iPod Touch?

    Will an iPod Classic work for the Nike + iPod Sport Kit?
    No.
    Why does the Nike + iPod Sport Kit only work for iPod Nano and iPod Touch?
    Only those iPods contain the firmware needed to use it, likely because iPods with a hard drive such as the iPod classic are much more vulnerable to drops and other hard impacts than iPods which use flash media.
    (43864)

  • Nike+ iPod Sport Kit for my personal workout and running.

    I bought a Nike+ and I already have a iPod 5th Gen. with video and 80GB(which I love). Is there a software available to make the two compatible or is the Nike+ still only able to work with the iPod Nano? What should I do ?

    Will an iPod Classic work for the Nike + iPod Sport Kit?
    No.
    Why does the Nike + iPod Sport Kit only work for iPod Nano and iPod Touch?
    Only those iPods contain the firmware needed to use it, likely because iPods with a hard drive such as the iPod classic are much more vulnerable to drops and other hard impacts than iPods which use flash media.
    (43864)

  • Hi Apple, Can you update the iPod touch 4g and make it have Siri, the fans of Apple wants it :( including me please?

    Hi Apple, Can you update the iPod touch 4g and make it have Siri, the fans of Apple wants it :( including me please?

    You are not addressing Apple here. We are just users like yourself. To make a suggestion to Apple:
    Apple - iPod touch – Feedback
    Per the following the 4G iPod does not have the hardware to adequately support Siri.
    audience technology and siri - Google Search

  • HT4623 Can you update the ipod touch 2nd generation

    Can u update the ipod touch 2nd generation,Or do u have to buy a new ipod touch...

    iOS 4: Updating your device to iOS 5 or later
    Here are the last OS versions for each iPod generation:
    An original iPod Touch can run iPhone OS 3.1.3
    2G model: maximum iOS 4.2.1
    3G model: maximum iOS 5.1.1
    4G, 5G can run iOS 6.
    Message was edited by: John Galt

  • When i try to update software for my 3rd Gen iPod Touch to version 5 i get the message 'This version of iTunes (9.2.1) is the current version'. My Mac OS is 10.4.11. How can I update the iPod software?

    When i try to update the software for my 3rd Gen iPod Touch to version 5 i get the message 'This version of iTunes (9.2.1) is the current version'. My Mac OS is 10.4.11. How can I update the iPod software?

    The later iOSs requires at least OSX 10.5.8 for the Mac.  You need iTunes 10.5 but 10.4.11 only goes to 9.x.. 10.5.8 is a paid upgrade.
    Are you sure that you have a 3G iPod?  If it is 8 or 16 GB it is a 2G and those can only go to 4.2.1 (also requires 10.5.8 or later). A 32 GB can be either  2G or 3G. To identify yours:
    Apple - Support - Check Your Service and Support Coverage
    Identifying iPod models

  • I have an iPod nano but can't find the Nike . Is there something I need to buy?

    I have an iPod Nano, but I can't find the Nike+ option. Is there something I need to buy?

    yes there is a special shoe made for it and you have to buy a component to fixit
    here is a link
    http://store.apple.com/us/product/MA368LL/E

  • Can I update the software on my MA002LL IPOD Classic 5th Generation?

    Can I update the software on my MA002LL IPOD Classic 5th Generation?

    If it’s running version 1.3 of the firmware, it’s up to date. Otherwise, click here and follow the instructions.
    (115305)

  • TS1484 Will a Nike + IPod sport kit sensor work with a 4s IPhone?

    Will a Nike + IPod sport kit sensor work with a 4s IPhone?

    I dont doubt your claim of 55-75 hours of usage
    solely on running since january. Even though you say
    that it has died prematurely with the range of hours
    you give since the time you purchased the sensor.
    I must ask if you were concious of turning off
    the sensor when it was not in usage. You know
    hitting that little button on the sensor itself to
    deactivate the battery. If your answer is no that you
    never remembered to turn off this sensor then. Your
    idea that it has died prematurely is bad. Because
    without physically turning off the sensor itself
    (thats the portion in the sole of the shoe) then it
    has been on 24/7 since you purchased it in january.
    Now if you have remembered to turn off the sensor
    after each run then it might have died prematurely.
    IF thats the case I would contact apple or the place
    from which you purchased it and ask for some help
    regarding the sensor.
    GFF:)
    Umm, no: From the FAQ
    "The sensor’s battery has a life of more than 1000 active hours. The sensor has a sophisticated built-in power management system which means that the sensor really only consumes power when active (that is, when it senses motion)."
    Mine is now showing the low battery indicator at 277 hours. I'm not the only one with premature battery failure.
    http://forums.nike.com/message.jspa?messageID=85240
    http://forums.nike.com/thread.jspa?threadID=6102&tstart=0
    There are more threads (just search on "sensor battery").
    This should be covered by the warranty. Can someone from Apple please respond to this thread?

  • Is there any way I can just update the apps on my iPhone using iTunes on my PC?, Is there any way I can just update the apps on my iPhone using iTunes on my PC?

    I have more than a 100 apps which I do not use but are there in my iTunes library! My iPhone has only a few (40) updates. As I am not allowed to use office wi-fi to download or update my phone apps, I want to use iTunes on my PC for the same. But I do not want to waste time searching for the apps on my phone and then update it using iTunes. Also, I do not want to update all the apps in my iTunes Library as there are more gthan 100. Can anyone suggest me a method where I can just update the apps that are on my phone using iTunes??
    I have the latest iTunes installed.

    Your i-device was not designed for unique storage of your media. It is not a backup device and media transfer was planned with you maintaining a master copy of your media on a computer which is itself independently backed up against loss.  To use a device with a different setup you transfer the old library from a computer or a backup directly to the new setup, not the device to the library. Media syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchases which can be transferred to a computer.
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only purchases from iTunes Store
    For transferring other items from an i-device to a computer you will have to use third party commercial software.  See this document by turingtest2: Recovering your iTunes library from your iPod or iOS device - https://discussions.apple.com/docs/DOC-3991

  • How can I update my 8g ipod touch from 4.2.1 to something higher?

    I have an 8G ipod touch with ios 4.2.1 which won't allow me to download most apps.
    I want to update it to a higher ios but when in itunes, when I click on the check for updates, it just idicates that the ios 4.2.1 version is already on the ipod. 
    How can I update the ipod?

    You appear to have a second generation iPod touch, which can't be updated further.
    (83325)

  • Why I can not update the software of Iphone 6

    I can not update the software of my Iphone

    Hi alabdulla,
    If you are having an issue with updating iOS on your iPhone through iTunes, I would suggest that you troubleshoot using the steps in this article - 
    Resolve iOS update and restore errors in iTunes
    If you are trying to do your update over Wi-Fi, try doing it when connected to your computer and using iTunes. See this article -
    iTunes 11 for Windows: Update and restore software on iPod, iPhone, or iPad
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

Maybe you are looking for

  • SELECT Query to get the Values in Case insensitive Format

    Hi , This is hari, I want to select the user name in a table ex: username="HARI" or username='Hari' or username="HaRi" like this If i wrote the query like select username from userdb where username="Hari"; it is displaying the records which only matc

  • Can't turn off reading disability

    Hi, I accidentally turned on the reading disability feature on my iMac on and I can't seem to turn it off again. The screen moves around as I move my cursor around and everything stays enlarged on my monitor. Does anyone know how I can turn this off?

  • Target Disk Mode = MAX FANS!

    I know I'm not the only one with this issues as almost every Mac I've ever used has done this. Why is it that when you run your Mac in target disk mode, the fans slowly rev up until they hit max speed, and then it just stays that way. EVEN IF THE COM

  • Currency exchange rate

    I, have a question regarding the Currency exchange rate. We have a total of 20 -25 different local currency data records in R/3. In BW reprot we need to convert all these local currency to CDN. Can anyone suggest me how to do it and anylinks that wou

  • NW04 and NW2004s Preview on same machine possible?

    Hi everybody, has anyone managed to have both NW04 preview (ABAP) and NW2004s Preview (ABAP) installed on the same machine? Is it possible at all? I would like to have both systems installed on my laptop and be able to start one of the servers at a t