Can't update to IOS 5.1, says IOS 5.0.1 is the latest software, Can't update to IOS 5.1, says IOS 5.0.1 is the latest software
Since a few hours ago, IOS 5.1 has been released but on both my iPad and my iPhone, it still says that my software is up to date though I have IOS 5.0.1. Both my parents have been able to update, and most of my friends are updating right now. Any help?
I do not use itunes to update, I want to update directly from my iDevice as they are not synced to my computer and everything will be erased.
I don't know if this will be any help to you...we posted the same problem and while I'm searching for answers, I ended up here. Can't update either, says my 5.0.1 is up to date software (which obviously we know is not anymore).
Tried to turning off, reset settings, wait it out... nothing, nada... I hope some apple genius guy can help us here cuz personally, I would love to download the iPhoto and i'd like to update my iMovie and Pages which i currently can't cuz it needs 5.1.
Similar Messages
-
I just updated my iPad to iOS 5 and now can't send email- I have tried the obvious but no luck. Any suggestions?
Usually 'authentication required' means that you need to submit a username (or e-mail address) and password to the e-mail server, when sending a message. This logic is not different between Outlook and Thunderbird, and even with the latest and previous version of Thunderbird.
Of course you can try the previous version again to see if it solves the problem, although you'll be less secure because you would be missing the latest fixes.
If you'd be willing to get back to Thunderbird, say if your frustration level with your new app would increase too much, please see our article [https://support.mozilla.org/en-US/kb/cannot-send-messages cannot send messages] for further help.
In all other cases I'd appreciate it if you could mark this as answer so we know you don't need further help. -
I updated the latest version of iOS software on my Macbook Pro and now when I try to open up iPhoto it says that I need to update the latest version. But when I go to update on iTunes, it says the latest version is unavailable to the U.S. I wouldn't mind leaving it be but I can't access any of my photos. What do I do?
stuckoncc wrote:
I updated the latest version of iOS software on my Macbook Pro
iOS is on iPhones and iPads.
Are you using an iPhone or iPad? -
Changed my apple id but FaceTime didn't recognize this and when I updated to iOS 6 I can no longer get on to FaceTime. When I try, it says that the username or password is incorrect. Can anyone help
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
Cheers, Tom -
I have an iPod touch 4g. It's white I just got it a week ago. It had iOS 5.0.1 for default. I could get music on my iPod with syncing it from my pc. I updated it to Ios 5.1.1 from my device and now I can't sync music from my computer. It says on my pc that I have the songs that I want on my iPod but when I go into my iPod they are not there. I have already uninstalling iTunes and reinstalling as well as putting my iPod in dfu mode (hold power and home button). I need help please
If you have not taken the iPod apart, Apple will exchange it for a refurbished one for $99. You can do it an an Apple store
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Or sent it to Apple -
My iphone 4 is dead after I updated to ios 6.1.3 it doesnt turn on and doesnt respond to itunes also. Visited Apptronix service desk but they say there is nothing they can do about it, and they have charged INR 10640 for a new one. Is there anybody with similar problem....
Hm... Try this----> http://support.apple.com/kb/ht1808 or http://osxdaily.com/2010/12/04/ipad-dfu-mode/
-
How come I can't update my iPad 1 to the new iOS 6 it says my iOS version 5.1.1 is the latest version?
The iPad 1, coming up on three years since it was introduced, has been given two major and a number of minor upgrades to iOS, more than many tablet manufactures provide. The iPad 1's hardware just can't effectively support many of the features in iOS 6. So I don't think that it's particularly unfair for Apple to no longer provide updates. And yes, I do own and manage a number of iPad 1s.
Regards. -
I get a message that says "This version of pre-release ios will expire in 7 days" What should I do? I am currently running ios 8 GM and I can't update to the public release version. I am stuck in the beta. Itunes will not let me restore my iphone or update it. PLZ HELP ME
Wondering if you have a current Backup on iTunes ...if yes you could put the iPhone in DFU Mode by holding the Home button while you plug in the lightning cable. Then you could Restore the iPhone to Factory Settings on 8.0.2 and after a full Restore go back and then Restore from your Backup. This happens every time a public release occurs. Many folks on the Golden Master or otherwise in the AppleSeed program with a Beta version for some reason don't move to the official release ...then the software time-bomb hits and they can't upgrade.
-
Hi, I recently updated to iOS 8.0 on my Ipad mini however when i try to agree to the new terms and conditions i get an error message saying either 'Cannot connect to server' or 'Your session has timed out please try again' what can be done to resolve this problem? Also i cannot download anything from the App store as a result of this.
Can you check the Object Security for the Analysis Menu and Export button and see if it is restricted?
Also, is this a Oracle DB? IF so, has the following 32 bit Oracle Client components been isntalled:
Oracle Objects for OLE
Oracle Data Provider for .NET
Oracle Providers for ASP.NET -
I updated my iphone 5 to ios 6.0.2. my wifi says its connected but doesn't work now. It doesn't matter what wifi network I connect to. It worked before updating my phone. I can no longer use facetime or use wifi at all. I'm not sure what to do to fix it.
I'm having similar issues with my phone. I got my first iPhone recently, only had an iPod touch gen4 for a little over a year. Updated to 6.0.2 when we got the phone (iPhone 5) a few days before Christmas. When I got home on the evening of January 11, my phone would not connect the router anymore. I was able to get it to connect after resetting the phone and the router, updating the router, and manually connecting. That laste for a few minutes and then wouldn't work anymore. I live in an area with very limited service, we have a network extender installed to help, and I am barely getting a 3G signal at times.
My wife's iPad 4, my touchiPod 4, and all of our laptops are working just fine on the router. When I dropped my kid off at school today, I noticed that I am not even seeing the school network anymore from the parking lot where before I got 3 or 4 bars and could connect to their wifi when I was there. Today my phone goes back and forth between seeing my home network but not connecting, to not even seeing the network at all even from the same room that the router is in.
Hope Apple fixes this problem soon.............. -
my ipod touch is 3rd gen how can i update my ios from 4.2.1 to 5.1.1 when i shift + restore and load the ipod3_5.1.1.ios its always say your firmware is not compatible
I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318. -
I have previously bout about 30-40 apps from the app store. After a recent update to the newest version of iOS (and a reset back to factory standards), i find that i cant put any of the apps from my iTunes library, back onto my phone!? When i try, it says that the apps location cant be found!? I tried going into the app store and in the app section going into 'Purchaces', in the hope that i could just re-install them from there (because i have already paid for them), but in there, it tells me that there are NO apps in my purchaces list!? This is quite concerning because i have spent quite a bit of money on these apps, that now seem to be un-usable?! Ican still put all my music on my phone through iTunes liuke normal, but Podcasts are doing the same thing as the apps?! Can someone please help me, or suggest what to do because im really getting frustrated. I really like my iPhone, but if this is what is going to keep happening, i think ill change to an Android phone. . . . .
Thanks too all the people who responded. . . . (noone)
Got it sorted though. Seems that Apple has issues with multiple apple id's.
Seems i had to somehow remember and use the original id i had when i first bought my 1st iPhone. . . .
Even after that it was extremely hard to get my apps back on my PC.
If anyone else has the same problem. . . .email Apple. Cya. -
i have an ipod touch 2nd generation, i'm trying to get apps that will work and i cant find any. Its says i need an update because it has ios 3.1.3 , but on itunes it says there is no update ? what apps can i get??
Sounds like you actually have a 1st generation as those cannot update beyond iOS 3.1.3.
Model Identifier Utility
rachelfromnorthumberland wrote:
what apps can i get??
Finding iOS Apps Compatible with Older Devices -
I have a iPad 2 I brought it yesterday and it has an update for iOS 6.1 but it won't let me download it. It keeps saying your no longer connected to the Internet but I'm connected to my wifi. Can you help please
Hi Blueandpink,
If you are running iOS 4, you will need to update the iPad via iTunes on your computer (can't do OTA updates unless you have iOS 5 or higher).
If you have a first generation iPad, unfortunately you won't be able to update to iOS 6 (iOS 5 is the highest you can update to on the original iPad).
If you are on an iPad 2, 3, or 4th generation with iOS 5 and it still isn't working, try holding down on both the Sleep AND Home buttons at the same time for about 10-15 seconds (ignore the red slider button). Keep holding it until the Apple Logo appears. When you see the Apple logo on the black screen, let go of the buttons. This “reset” fixes a lot of iPad issues and might work to resolve the update issue. Try updating again.
Hope this helps!
~Joe -
I am not able to get any directions on my maps i am using iphone 4s and updated to ios 6.1.3 and whenever i try to find a route it always says directions could not be found can anyone help in fixing it
Maps: Turn-by-Turn Navigation
Argentina Australia Austria Belgium Brunei Bulgaria Canada Croatia Czech Republic Denmark Egypt Estonia Finland France Germany Greece Hong Kong Hungary Ireland Israel Italy Japan Latvia Liechtenstein Lithuania Luxembourg Macau Malaysia Malta Mexico Morocco Netherlands New Zealand Norway Poland Portugal Romania Russia San Marino Singapore Slovakia Slovenia South Africa South Korea Spain Sweden Switzerland Taiwan Thailand Turkey UK Ukraine USA
Back to Top
Maybe you are looking for
-
i have second screen connected to my imac, after install security update 2015-003 , the second screen goto off after 1-3 min . what i must do ??
-
Once upon a time both A.P. devices used v.5.7 firmware and music could be played from Multiple Speakers i.e. Computer and Living Room. In a moment of insanity I "upgraded" the Express firmware to v.6.1.1 and now music plays only from one speaker, or
-
Hi I am trying to set object in session first I set object in session in first servlet as session.setAttribute("name"object); this session obj can retrive in jsp page I make one link <a href="abc which call another servlet I want this session object
-
SEM 4.0 Management cockpit buffer job - long runtime
Hello, we run SEM 4.0, and have 14 cockpits with each 4 frames. Several frames are based upon the same query, in the buffer job definition we use the CPM variables to select the subset of data from the query that is to be used. The queries themselves
-
Magic Mouse triggering Mission Control on remote machine, how do I stop it?
I'm not sure if this is a bug or not, but here's the deal: sometimes, when I single finger scroll with my Magic Mouse, it will trigger Mission Control on the remote mac. Probably happens about 50% of the time. The other 50% it correctly scrolls the d