Can't update USBPORT.SYS

I keep getting hit on by my security department scans because a handful of Windows 2008 R2 VMs have an old version of usbport.sys. I have applied the required patches but the file doesn't update. There no errors being generated in the event logs.
One article suggest applying KB2533552 before KB22862330 first but it is already installed. Another suggest disabling all USBEHCI controllers but there are none to disable when I look in device manager, possibly because it is a VM. I could really use
some ideas. The server is functioning fine but the security department won't be happy until I can update this file to the newest version.

I keep getting hit on by my security department scans because a handful of Windows 2008 R2 VMs have an old version of usbport.sys.
To leverage off of Jason's point... it's highly unlikely you even have USB "hardware-emulation" support for these VMs, so the simpler solution may simply be to delete the offensive file and be done with it. :-)
While updating the file is always a solution... not having to update a file that has no purpose is an even better one.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Similar Messages

Waas error message - WAAS-SYS-4-900000: time.c: can't update CMOS

This was moved from another board,
I this error on our syslog server from our WAE-7371 (running older code, but that is in the works to upgrade shortly,4.1.3b) , and I have checked the clocks on the inline devices and the CM and all are set insync. Any other ideas?
kernel: %WAAS-SYS-4-900000: time.c: can't update CMOS

Hi Cora,
With the NTP source being the same on on all devices and the clock in sync among them, the battery problem was confirmed in the bmc.log as the last entries indicated the power off/down with timestamp 01/02/1970.
The resolution is to RMA the appliance.
Regards,
Fabio Bergamo
Cisco TAC

Can't update my apps

Hi,
I can't update my apps.
In the Updates tab, it always shows that all my apps are up to date...
http://i.imgur.com/4xz07.jpg
But in the Purchased tab, that is not the case...
http://i.imgur.com/g90ln.jpg
Plus, I know there are updates available because I have received emails from the developers telling me so.
Clicking "update" on any given app in the Purchased tab induces an alert saying that I need to sign in to the account the apps were purchased in but offers no way to sign in. I already am signed into that account (that's how I can see apps in the purchased tab).
I have tried signing out and back in, throwing out the macappstore preferences and signing back in, throwing away the whole app and preferences and recovering the app from a very old Time Machine Backup and signing back in. Nothing changes the situation.
Has anyone else experienced this? Does anyone have any ideas?
Thanks!

This appears to be a common error with MacBooks Air. If you Google search on the wording of the error code you will find posts in forums all over the Internet, and everyone that I have seen is a MacBook Air. And they also seem to have in common that a number of them had been recently worked on by Apple Geniuses at Apple Stores.
The most useful info in resolving the issue is that the image Apple Geniuses are using to format MBA HDDs has a bad .plist file.
To resolve the issue for most folks;
1. Go to Sys Prefs/Network and note your Network configuration. Then remove all network adapters.
2. Trash the file /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
3. Restart
4. Go to SYs Prefs/Network and restore the network adapters and configure your Network settings again.
The Mac App Store should now work properly.

P55-GD65:USBPORT.SYS fault

Nothing than troubles with this one.this is my first MSI board and it will be my last MSI board nothing then troubles with it
When i remove the webcam from the system the PC starts automatic again.
When i unmarked automatic reboot then i get this fault "USBPORT.SYS"(blue screen)
When i do the same with usb stick it works fine,i have this problem only with the web cam and in all the usb ports
And it is only in Win xp and the fault is not when i unplug the webcam in win7.
Log files of win xp let see this:
ftdisk id-57
0000: 00 00 00 00 01 00 be 00 ......¾.
0008: 02 00 00 00 39 00 04 80 ....9..
0010: 00 00 00 00 0e 00 00 c0 .......À
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........
P55-GD65
I7 860
Antec 750W Truepower
Antec W160 case
4GB corsair TW3X4G1600C9D
Samsung F1 sata
2x ide 120HD
synthe ninja cooler
Bios version 1.5
Win xpsp3 and dualboot Win7
Greets William

I send the modules back to the shop on RMA before I read the above suggestions. Hope you do not mind guys!
My opinion at the moment is that I have done a whole lot to make these modules work, more than you can expect from a customer. As far as this goes, I believe the modules should be able to run at standard settings (timings, voltage, etc) on any motherboard. I am not interested where the responsibility lies for the manufacturers of either hardware, but the whole thing seems to be lacking standardization (if at all possible with this kind of hardware). Maybe I am to narrow minded in this, but that’s the reason I send them back. Apart from being a hardware and computer enthusiast, I am also still a customer with certain expectations.
It looks like the shop agreed because, after receiving the modules via the RMA procedure they replied (translated from dutch):
Quote
Dear xxxx
We have tested your returned product(s). The results from our test indicate that the product is indeed faulty.
We will contact you as soon as possible to discuss further steps.
Since the receipt notification (of receiving the package I send) and the notification above were only 1 minute apart, I have reason to believe that they did not test the modules at all (or did not care what the result is).
I do wish to express my gratitude for your help, without your help I could not have come this far! Thanks!
@utgamer2004: I hope your RMA will be granted as well, my experience may be positive but this will depend on the shop or the manufacturer.

How can I update my app store account ?

Hi, I have a new Iphone and I wanted to add some applications from apple store.
Unfortunately, I had a message saying that I was using app store on a new device (true) and they needed to check some security thing from my visa card. Unfortunately, I had a new card and do not have the previous one anylonger (the previous one expires in 1 year but had to be cancelled).
Therefore I am blocked and cannot get into my account.
How can I update my bank account and get into the apple store again ?
Thanks
Nadiege

Great, it worked. i could update the account from the laptop (but not from the phone).
Many thanks for such a swift feedback !!

I upgraded from 3gs and want to use my old 3gs as an ipod. how can i update my new apple ID on the 3gs as it still shows a previous one that I had?

I recently upgraded from 3Gs to Iphone4 and want to use my old 3Gs as an ipod. how can i update
the user ID on the 3gs to a new one that I have as it is still showing a previous user ID?

Settings>Store...tap the ID shown...sign out...sign back in with the ID you want to use.

How can i update data in JTable at run time ?

i am trying to build a client/server architecture for conducting quizzes & online tests.. My client will return a object to the server after the test is over, which contains details about the participant, his score and other details. i am putting the incoming object to an Vector. I'll create a new thread each time for the incoming connection and insert the object to the Vector.. Now, please tell me tat, how can i update my table automatically at run time so tat, my table is updated whenever a new object is entered into vector..
here is my code for the table..
public class MyTableModel extends AbstractTableModel {
    String columNames[] = { "ID", "NAME", "COLLEGE", "SCORE", "CELL" };
    /** Creates a new instance of MyTableModel */
    public MyTableModel() {
        Main.List = new Vector();
        SetDefaultData();
    public int getRowCount() {
        return Main.List == null ? 0 : Main.List.size();
    public int getColumnCount() {
        return columNames.length;
    public String getColumnName(int column) {
        return columNames[column];
    public boolean isCellEditable(int row,int col) {
        return false;
    public Object getValueAt(int rowindex, int columnindex) {
        if(rowindex < 0 || rowindex >= getRowCount())
            return "";
        Student row = (Student)Main.List.elementAt(rowindex);
        switch (columnindex)
            case 0 : return row.id;
            case 1 : return row.name;
            case 2 : return row.college;
            case 3 : return row.score;
            case 4 : return row.cell;
        return "";
    public String getTitle() {
        return "Student Table";
    private void SetDefaultData() {
        Main.List.removeAllElements();
        Main.List.addElement(new Student("CS041","Keerthivasan M","MNM",95,"9884326321"));
        Main.List.addElement(new Student("CS012","Arun M","MNM",90,"9884825780"));
        Main.List.addElement(new Student("CS019","Balaji S","MNM",79,"9841742068"));
        Main.List.addElement(new Student("CS005","Anand R","MNM",89,"9884130727"));
        Main.List.addElement(new Student("CS045","Manish J","MNM",55,"9841624625"));
        Main.List.addElement(new Student("CS013","Mangal S","MNM",5,"9841961742"));
}

In the future Swing related questions should be posted in the Swing forum.
how can i update my table automatically at run time so tat, my table is
updated whenever a new object is entered into vector..You don't update the Vector directly. You should be creating a method in your TableModel, called "addRow(...)". This method will do two things:
a) add the Student object to the Vector
b) invoke the fireTableRowsInserted(..) method of AbstractTableModel. This will cause the table to be repainted.

HT1212 I am unable to get our of a continuous cycle when trying to update or restore my iPad 2. Plug in to iTunes 12.0.1 (latest version). Click update, told can't update, have to restore. Restore fails with error 9. Any help appreciated.

When I tried to update my iPad I got an error 9. Now, I am unable to access my iPad. It is in a continuous cycle when I try to update or restore the iPad 2. Plug in to iTunes 12.0.1 (latest version). Click update, told can't update, have to restore. Restore fails with error 9. Any help appreciated.
Here's the cycle:
I plug in my iPad when “cable to iTunes shows on iPad screen. It says "Your iPad can't be updated, you must restore it to factory settings." That bad enough news, but it gets worse.
Click Restore
Extracting software…
Preparing iPad for restore
Waiting for iPad…
Verifying iPad restore with Apple…
(empty bar under the Apple logo…does not show any activity)
“The iPad “iPad” could not be restored. An unknown error occurred (9).”
Notes: I just upgraded to OS X Yosemite 10.10.1 on my iMac (27-inch, Mid 2011) in the last week. It’s the first time I’m tried to backup/update my iPad since the iMac update.
I swapped out the USB cable to a new cable and get the same results.
I also unplugged all other USB devices from the iMac and security on my iPad and still get the same results.
I find it strange that it shows no Serial number for my my iPad 2 when plugged in. It shows “Serial Number: n/a on the screen when it displays: “iPad Recovery Mode To update your iPad without erasing its contents, click Update. To restore your iPad to its factory settings, click Restore iPad.
I prefer to update my iPad, but it displays “Your iPad can’t be updated, you must restore it to factory settings. If you previously backed up the iPad, click Restore Backup after the restore process completes.”
It’s a continuous loop. I get the display on my iPad to plug in the iPad to iTunes, plug it in which ends after going through the above procedure saying an error occurred (9).
So now I cannot use my iPad. When I turn it on I get the display showing me to plug it into iTunes with the cable. Since this is the only option I have I plug it in and the loop begins.
Any advice would be appreciated.
Thanks!

Hello jaybearden,
Thanks for the question. After reviewing your post, it sounds like you are not able to restore the iOS device since you get an error 9. I would recommend that you read this article, it may be able to help the issue.
Resolve iOS update and restore errors - Apple Support
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Can't update in mysql

I am using JSP and MYSQL with a bean that does my database work.
my search.jsp looks up records, when I click edit it sends the values to my inventory_admin.jsp
When I make the changes to the data, the data is not saved in the database.
Please, look see!

<jsp:useBean id="inventoryBean" scope="session" class="mybeans.inventoryBean" />
<%@ page contentType="text/html; charset=iso-8859-1" language="java" import="java.sql.*" errorPage="" %>
<html>
<head>
<title>Untitled Document</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
</head>
<body>
<%// Do search with bean.
     String s = request.getParameter("searchField");
     int searchId = -1;
     if(s != null)
          try
               searchId = Integer.parseInt(s);
          catch(NumberFormatException e) {}
     //Do actual search with bean
     boolean rc = false;
     if(searchId != -1)
          rc = inventoryBean.findByPrimaryKey(searchId);
          %>
<form action="search.jsp" method="post" enctype="application/x-www-form-urlencoded">
<h2 align="center">Software Inventory </h2>
<p align="center"> </p>
<p>Lookup:
<input name="searchField" type="text" id="searchField">
<input type="submit" name="Submit" value="Submit">
</p>
</form>
<%
     //Output 'not found' message if needed
     if(rc == false)
          out.println("<P><B>Product not found</B></P>");
%>
<table width="25%" border="0">
<tr>
<td>Item ID:</td>
<td><jsp:getProperty name="inventoryBean" property="itemid" /></td>
</tr>
<tr>
<td>Product Name:</td>
<td><jsp:getProperty name="inventoryBean" property="item" /></td>
</tr>
<tr>
<td>Platform:</td>
<td><jsp:getProperty name="inventoryBean" property="platform" /></td>
</tr>
<tr>
<td>Serial:</td>
<td><jsp:getProperty name="inventoryBean" property="serial" /></td>
</tr>
<tr>
<td>Description:</td>
<td><jsp:getProperty name="inventoryBean" property="description" /></td>
</tr>
</table>
<p>&nosave=yes">EDIT</a></p>
<p align="center"> </p>
</body>
</html>

<jsp:useBean id="inventoryBean" scope="session" class="mybeans.inventoryBean" />
<%@ page contentType="text/html; charset=iso-8859-1" language="java" import="java.sql.*" errorPage="" %>
<html>
<head>
<title>Untitled Document</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
</head>
<body>
<%-- Copy all form variables at once into the bean--%>
<jsp:setProperty name="inventoryBean" property="*" />
<%
     boolean saveResult = false;
     boolean notSaved = false;
     //Save our changes
     String s = request.getParameter("nosave");
     if(s == null || s.equals("yes") == false)
saveResult = inventoryBean.update();
     else
          notSaved = true;
     //Do search with bean
     s = request.getParameter("itemid");
     int searchId = -1;
     if(s != null)
          try
               searchId = Integer.parseInt(s);
          catch(NumberFormatException e) {}
     //Do actual search with Bean
     boolean rc;
     if(searchId != -1)
          rc = inventoryBean.findByPrimaryKey(searchId);
%>
<h2 align="center">Software Inventory - Edit Mode</h2>
<FORM action="inventory_admin.jsp" method="post" enctype="application/x-www-form-urlencoded">
<table width="25%" border="0">
<tr>
<td>ITEMID</td>
<td><jsp:getProperty name="inventoryBean" property="itemid" /></td>
</tr
<tr>
<td>Product Name:</td>
<td><input name="description" type="text" value="<jsp:getProperty name="inventoryBean" property="item" />"></td>
</tr>
<tr>
<td>Platform:</td>
<td><input name="description" type="text" value="<jsp:getProperty name="inventoryBean" property="platform" />"></td>
</tr>
<tr>
<td>Serial:</td>
<td><input name="description" type="text" value="<jsp:getProperty name="inventoryBean" property="serial" />"></td>
</tr>
<tr>
<td>Description:</td>
<td><input name="description" type="text" value="<jsp:getProperty name="inventoryBean" property="description" />"></td>
</tr>
</table>
<%
     if(notSaved == false)
          if(saveResult == true)
               out.println("Changes saved");
          else
               out.println("Changes NOT saved");
%>
<p><input type="submit" name="Submit" value="Submit"></p>
<p align="center"> </p>
</FORM>
</body>
</html>
//inventory.java
Here is the Bean Im using:
// inventoryBean.java - Simple database bean for table products
package mybeans; // Our custom 'package'.
import mybeans.DBConfigInfo; // Import helper classes
import mybeans.DBWorker; // for simpler database programming.
// Import other packages here.
import java.sql.*; // For database access.
import java.util.Hashtable; // For findRecords().
public class inventoryBean
private boolean isBeanDataValid = false; // Set when bean contains valid data.
private boolean isDBError = false; // Stores whether there was a processing error.
private String dbErrorMsg = "(No error)";
private DBWorker dbWorker; // Helper object for JDBC programming.
// Attributes
private String item = "";
private String platform = "";
private String serial = "";
private String description = "";
private int itemid = 0; // Primary key field
public void clear()
// Clears data in all your properties to 'empty' state.
item = "";
platform = "";
serial = "";
description = "";
itemid = 0; // Primary key field
// Accessor Methods
public void setItem(String newItem) { item = newItem; }
public String getItem() { return item; }
public void setPlatform(String newPlatform) { platform = newPlatform; }
public String getPlatform() { return platform; }
public void setSerial(String newSerial) { serial = newSerial; }
public String getSerial() { return serial; }
public void setDescription(String newDescription) { description = newDescription; }
public String getDescription() { return description; }
public void setItemid(int newItemid) { itemid = newItemid; }
public int getItemid() { return itemid; }
// Operations
// Default constructor.
public inventoryBean()
// Create a helper object to work with database.
// DO NOT DELETE THIS CODE.
dbWorker = new DBWorker();
// Database Operations
// Built-in methods:
public boolean findByPrimaryKey(int searchId)
// Use this method to find 1 record by primary key for your table.
// (After this call, all fields will be loaded into your properties.)
// Clear existing data, if any.
clear();
isBeanDataValid = false;
// Query by primary key.
boolean rc = dbWorker.open();
if(rc == false)
isDBError = true;
dbErrorMsg = dbWorker.errorMsg;
return false;
try
// 1) Get a connection.
Connection conn = dbWorker.getConnection();
// 2) Create a statement.
Statement st = conn.createStatement();
// 3) Build your SQL.
String sql = "SELECT item, platform, serial, description, " +
"itemid " +
"FROM products " +
"WHERE itemid=" + searchId;
//System.out.println("DEBUG SQL =" + sql);
// 4) Get a result set.
ResultSet rs = st.executeQuery(sql);
// 5) Move to first record
if(rs.next())
// 6) Retrieve fields into your properties using JDBC get??? methods.
item = rs.getString("item");
platform = rs.getString("platform");
serial = rs.getString("serial");
description = rs.getString("description");
itemid = rs.getInt("itemid");
// 7) Ensure non-null String fields with dbWorker.safeStr()
item = dbWorker.safeStr(item);
platform = dbWorker.safeStr(platform);
serial = dbWorker.safeStr(serial);
description = dbWorker.safeStr(description);
// Set result code.
isBeanDataValid = true;
// 8) Close all DB objects.
rs.close();
st.close();
dbWorker.close(); // Connection too.
catch(SQLException e)
System.out.println("Error in findByPrimaryKey (" + e.getMessage() + ")");
return isBeanDataValid;
// Update a record
public boolean update()
// Use this to update a record by a primary key.
boolean resultCode = false;
// Query by primary key.
boolean rc = dbWorker.open();
if(rc == false)
isDBError = true;
dbErrorMsg = dbWorker.errorMsg;
return false;
try // Remember to put all DB code inside a try block!
// 1) Get a connection.
Connection conn = dbWorker.getConnection();
// 2) Create a statement.
Statement st = conn.createStatement();
// 3) Build your SQL.
String sql = "UPDATE products SET item=" + dbWorker.sqlStr(item) + "," +
"platform=" + dbWorker.sqlStr(platform) + "," +
"serial=" + dbWorker.sqlStr(serial) + "," +
"description=" + dbWorker.sqlStr(description)+
" WHERE itemid=" + itemid;
//System.out.println("DEBUG SQL =" + sql);
// 4) Run action query.
int rowsAffected = st.executeUpdate(sql);
// 5) See if we succeeded (1 recorded affected).
if(rowsAffected == 1)
resultCode = true;
else
System.out.println("Warning: Can't update in update()!");
// 6) Close all DB objects.
st.close();
dbWorker.close(); // Connection too.
catch(SQLException e)
System.out.println("Error in update (" + e.getMessage() + ")");
return resultCode;
// Delete a record
public boolean delete(int deleteId)
// Use this to delete a record by a primary key.
boolean resultCode = false;
// Query by primary key.
boolean rc = dbWorker.open();
if(rc == false)
isDBError = true;
dbErrorMsg = dbWorker.errorMsg;
return false;
try
// 1) Get a connection.
Connection conn = dbWorker.getConnection();
// 2) Create a statement.
Statement st = conn.createStatement();
// 3) Build your SQL.
String sql = "DELETE FROM products WHERE itemid=" + deleteId;
//System.out.println("DEBUG SQL =" + sql);
// 4) Run action query.
int rowsAffected = st.executeUpdate(sql);
// 5) See if we succeeded (1 recorded affected).
if(rowsAffected == 1)
resultCode = true;
else
System.out.println("Warning: Can't delete ID #" + deleteId + " in delete()!");
// 6) Close all DB objects.
st.close();
dbWorker.close(); // Connection too.
catch(SQLException e)
System.out.println("Error in delete (" + e.getMessage() + ")");
return resultCode;
// Insert a new record.
public boolean insert(String newItem, String newPlatform, String newSerial, String newDescription,
int newItemid)
     // Use this to update a record by a primary key.
boolean resultCode = false;
// Query by primary key.
boolean rc = dbWorker.open();
if(rc == false)
isDBError = true;
dbErrorMsg = dbWorker.errorMsg;
return false;
try // Remember to put all DB code inside a try block!
// 1) Get a connection.
Connection conn = dbWorker.getConnection();
// 2) Create a statement.
Statement st = conn.createStatement();
// 3) Build your SQL.
String sql="INSERT INTO products(item, platform, serial, description, " +
"itemid) " +
"VALUES(" + dbWorker.sqlStr(newItem) + "," + dbWorker.sqlStr(newPlatform) + "," + dbWorker.sqlStr(newSerial) + "," + dbWorker.sqlStr(newDescription) + "," +
newItemid + ")";
//System.out.println("DEBUG SQL =" + sql);
// 4) Run action query.
int rowsAffected = st.executeUpdate(sql);
// 5) See if we succeeded (1 recorded affected).
if(rowsAffected == 1)
resultCode = true;
else
System.out.println("Warning: Can't update in insert()!");
// 6) Close all DB objects.
st.close();
dbWorker.close(); // Connection too.
catch(SQLException e)
System.out.println("Error in insert (" + e.getMessage() + ")");
return resultCode;
public int findMaxPrimaryKey()
// Use this method to find the current max. value for a primary key
// in the database for a given table.
int retVal = -1;
// Query by primary key.
boolean rc = dbWorker.open();
if(rc == false)
isDBError = true;
dbErrorMsg = dbWorker.errorMsg;
return -1;
try // Remember to put all DB code inside a try block!
// 1) Get a connection.
Connection conn = dbWorker.getConnection();
// 2) Create a statement.
Statement st = conn.createStatement();
// 3) Build your SQL.
String sql = "SELECT MAX(itemid) FROM products";
//System.out.println("DEBUG SQL =" + sql);
// 4) Get a result set.
ResultSet rs = st.executeQuery(sql);
// 5) Move to first record
if(rs.next())
// 6) Retrieve fields into your properties using JDBC get??? methods.
retVal = rs.getInt(1); // Get first and only column.
// 7) Close all DB objects.
rs.close();
st.close();
dbWorker.close(); // Connection too.
catch(SQLException e)
System.out.println("Error in findMaxPrimaryKey (" + e.getMessage() + ")");
return retVal;
public Hashtable findRecords(String filter, String orderBy)
// Use this method to return a Hashtable filled with
// one or more records. You can specified a 'filter'
// for finding records and 'orderBy' will determine the sort order.
Hashtable retVal = new Hashtable();
retVal.put("ROWCOUNT", "0");
retVal.put("COLUMNCOUNT", "0");
retVal.put("STATUS", "EMPTY");
// Query by primary key.
boolean rc = dbWorker.open();
if(rc == false)
isDBError = true;
dbErrorMsg = dbWorker.errorMsg;
return retVal;
try // Remember to put all DB code inside a try block!
// 1) Get a connection.
Connection conn = dbWorker.getConnection();
// 2) Create a statement.
Statement st = conn.createStatement();
// 3) Build your SQL.
String sql = "SELECT item, platform, serial, description, " +
"itemid " +
"FROM products " +
"WHERE " + filter + " " +
"ORDER BY " + orderBy;
//System.out.println("DEBUG SQL =" + sql);
// 4) Get a result set.
ResultSet rs = st.executeQuery(sql);
int rowCount = 0;
// 5) Move to first record (and then next) record.
while(rs.next())
// 6) Retrieve fields into your properties using JDBC get??? methods.
String thisItem = rs.getString("item");
String thisPlatform = rs.getString("platform");
String thisSerial = rs.getString("serial");
String thisDescription = rs.getString("description");
int thisItemid = rs.getInt("itemid");
// 7) Ensure non-null String fields with dbWorker.safeStr()
thisItem = dbWorker.safeStr(thisItem);
thisPlatform = dbWorker.safeStr(thisPlatform);
thisSerial = dbWorker.safeStr(thisSerial);
thisDescription = dbWorker.safeStr(thisDescription);
// 8) Load this row into our Hashtable.
// The convention here is to pack each row's column name with an ID
// indicating the row. "ProjectId" + "0" = "ProjectId0" ===mapped to===> Value
// Put this record into Hashtable.
retVal.put("item" + rowCount, thisItem);
retVal.put("platform" + rowCount, thisPlatform);
retVal.put("serial" + rowCount, thisSerial);
retVal.put("description" + rowCount, thisDescription);
retVal.put("itemid" + rowCount, "" + thisItemid);
rowCount++;
// 9) Close all DB objects.
rs.close();
st.close();
dbWorker.close(); // Connection too.
// Write info to our hashtable--Since this container hold virtually anything,
// you can put in whatever 'metadata' you want about your result set.
retVal.put("ROWCOUNT", "" + rowCount);
retVal.put("COLUMNCOUNT", "5");
retVal.put("STATUS", "OK");
catch(SQLException e)
System.out.println("Error in findRecords (" + e.getMessage() + ")");
retVal.put("STATUS", "ERROR");
return retVal;
//============================================================
// DO NOT CHANGE THE CODE BELOW.
//============================================================
public boolean isValid()
// Does bean contain real data?
return isBeanDataValid;
public boolean isError()
// Returns true if there was a DB error.
return isDBError;
public String getErrorMsg()
// Returns error message, if any.
return dbErrorMsg;
//=====================================================================
// TODO: Remember to comment out main() with /* */ for production code!
//=====================================================================
// TEST DRIVER CODE
public static void main(String[] args)
// Test driver code goes here.
String beanName = "inventoryBean";
String tableName = "products";
boolean isDataValidationError = false;
// Exercise CRUD functionality of this bean.
System.out.println("==============================================================");
System.out.println("Starting Test Driver for bean " + beanName + "....");
System.out.println("==============================================================");
// Create bean.
inventoryBean myBean = new inventoryBean();
// Create a new record.
int newId = myBean.findMaxPrimaryKey();
newId++;
boolean rc = myBean.insert("e", "t", "g", "R",
newId);
if(rc)
System.out.println("SUCCESS: Inserted new record #= " + newId + ".");
else
System.out.println("ERROR! Can't insert record #= " + newId + ".");
System.out.println("====================================================");
System.out.println("VALIDATION FAILED: Test driver generated an error.");
System.out.println("====================================================");
return;
// Retrieve a record
rc = myBean.findByPrimaryKey(newId);
if(rc)
System.out.println("SUCCESS: Record #" + newId + " found.");
else
System.out.println("====================================================");
System.out.println("VALIDATION FAILED: Test driver generated an error.");
System.out.println("====================================================");
System.out.println("ERROR! Record #" + newId + " NOT found.");
// Simulate using set??? accessor methods with test data.
// (Note: We don't change the primary key.)
int testItemid = newId;
System.out.println("Testing set???() accessor methods....");
System.out.println("Setting Record #" + newId + " to:");
System.out.println(" inventoryBean.setItem(testItem); // = R");
myBean.setItem(testItem);
System.out.println(" inventoryBean.setPlatform(testPlatform); // = Y");
myBean.setPlatform(testPlatform);
System.out.println(" inventoryBean.setSerial(testSerial); // = E");
myBean.setSerial(testSerial);
System.out.println(" inventoryBean.setDescription(testDescription); // = k");
myBean.setDescription(testDescription);
System.out.println(" inventoryBean.setItemid(testItemid); // = " + newId);
myBean.setItemid(testItemid);
// Call update.
rc = myBean.update();
if(rc)
System.out.println("SUCCESS: Record #" + newId + " updated.");
else
System.out.println("ERROR! Record #" + newId + " NOT updated.");
System.out.println("====================================================");
System.out.println("VALIDATION FAILED: Test driver generated an error.");
System.out.println("====================================================");
return;
// Requery and validate each field.
rc = myBean.findByPrimaryKey(newId);
if(rc)
System.out.println("SUCCESS: Updated Record #" + newId + " found.");
else
System.out.println("====================================================");
System.out.println("VALIDATION FAILED: Test driver generated an error.");
System.out.println("====================================================");
System.out.println("ERROR! Record #" + newId + " NOT found");
// Simulate using get??? accessor methods.
// Validate updated values against test values.
System.out.println("Validating Record #" + newId + ":");
String testData;
String actualItem = myBean.getItem();
testData = "R";
if(testData.equals(actualItem))
System.out.println(" OK: inventoryBean.getItem() = actualItem");
else
System.out.println(" ERROR! inventoryBean.getItem() returned [" + actualItem + "] instead of [R]");
isDataValidationError = true;
String actualPlatform = myBean.getPlatform();
testData = "Y";
if(testData.equals(actualPlatform))
System.out.println(" OK: inventoryBean.getPlatform() = actualPlatform");
else
System.out.println(" ERROR! inventoryBean.getPlatform() returned [" + actualPlatform + "] instead of [Y]");
isDataValidationError = true;
String actualSerial = myBean.getSerial();
testData = "E";
if(testData.equals(actualSerial))
System.out.println(" OK: inventoryBean.getSerial() = actualSerial");
else
System.out.println(" ERROR! inventoryBean.getSerial() returned [" + actualSerial + "] instead of [E]");
isDataValidationError = true;
String actualDescription = myBean.getDescription();
testData = "k";
if(testData.equals(actualDescription))
System.out.println(" OK: inventoryBean.getDescription() = actualDescription");
else
System.out.println(" ERROR! inventoryBean.getDescription() returned [" + actualDescription + "] instead of [k]");
isDataValidationError = true;
int actualItemid = myBean.getItemid();
if(actualItemid == newId)
System.out.println(" OK: inventoryBean.getItemid() = actualItemid");
else
System.out.println(" ERROR! inventoryBean.getItemid() returned [" + actualItemid + "] instead of [" + newId + "]");
isDataValidationError = true;
// Cleanup with delete.
rc = myBean.delete(newId);
if(rc)
System.out.println("SUCCESS: Record #" + newId + " deleted.");
else
System.out.println("ERROR! Record #" + newId + " NOT deleted.");
// Now test out findRecords() for up to 100 records.
Hashtable data = myBean.findRecords("itemid > 0", "itemid");
String s = (String)data.get("STATUS");
if(s != null && s.equals("OK"))
s = (String)data.get("ROWCOUNT");
int rowCount = Integer.parseInt(s);
if(rowCount > 100) // Just output first 100 records.
rowCount = 100;
System.out.println("SUCCESS: Returning " + rowCount + " records (100 max.) using findRecords():");
for(int i = 0; i < rowCount; i++)
System.out.println(" Row #" + i + "=" +
data.get("item" + i) + ", " +
data.get("platform" + i) + ", " +
data.get("serial" + i) + ", " +
data.get("description" + i) + ", " +
data.get("itemid" + i));
else
System.out.println("ERROR! No rows returned using findRecords()!");
System.out.println("====================================================");
System.out.println("VALIDATION FAILED: Test driver generated an error.");
System.out.println("====================================================");
return;
if(isDataValidationError == false)
// Print final success message.
System.out.println("================================================================================");
System.out.println("VALIDATION SUCCESS! Bean " + beanName + " passed all automated tests.");
System.out.println("================================================================================");
else
System.out.println("====================================================================================");
System.out.println("ERROR! Tests completed but bean " + beanName + " had a data validation error.");
System.out.println("====================================================================================");

Couple of pointers.
1 - use [ code ] tags to post code
2 - that is WAY too much code for more than a cursory glance. You're lucky the problem was easy to spot.
Your problem lies in your edit JSP form:
<td>Product Name:</td>
<td><input name="description" type="text" value="<jsp:getProperty name="inventoryBean" property="item" />"></td>Note that the name of the input field is different from the jsp property you are populating it with.
In fact, all of your input fields have a name of "description"
I would recommend on your inventory_admin.jsp page that you put the following debugging code to make sure that the parameter values come through and are set correctly.
out.println("name = param: " + request.getParameter("name") + "bean = " + inventoryBean.getName() + "<BR>");
out.println("description = param:" + request.getParameter("description") + "bean = " + inventoryBean.getDescription() + "<BR>");
...

Can not update request in data target

Hi,
We have a process chain for master data (10 parallel) loads. One of the load
failed with error "can not update request REQU_46xxxxxxxxxxxxxx in data target".
When I checked the InfoPackage
(a) update: full load
(b) it has data selection
(c) processing :PSA and then to data targets
(d) Data targets: update in all data targets for which active rules exist.
But I do not see any list of data targets here.
Can some one please suggest me how do I correct this load failure.
Thanks

Hi Wondewossen, NS and Nagesh,
Thanks for the information. I am in support, and the developer is
not here now.
I have checked Header tab in the monitor, in this there
is a update symbol and infosource name and an -->
but after arrow there is nothing.
when I click on this I get a message
"No active update rules exist".
Can you please advice me how to I correct this.
Thanks

How can we update data in LDAP server using PL/SQL.

Hi,
How can we update data in LDAP server using PL/SQL program.
Is there any sample code for refrence.
Thanks,
Tarun

Hi Justin,
Thanks for your help. You got my correct requirements.
Tim's example returning all the attributes of current user which is admin user. Please correct me if I am wrong.
I have the following information:
the admin user and password,server info , port and ldap_base for admin.
I have uid and password for regular user, I am trying find the ldap_base for regular user, which may be different from adminuser.
Please help me.
Thanks,
Edited by: james. on Jan 12, 2009 5:39 PM

Can not update tab if its not the default sub-tab.

Can not update tab if its not the default sub-tab.
JDeveloper Version 10.1.2.1.0 (Build 1913)
Hi. I have a problem with a lovOpenWindowAction
The UIX is created with a master UIX and have several sub-tab that is included as UIX-pages.
The lovOpenWindowAction lies in the included UIX-page
The sub-tab I have a problem with has a table with users. Then I have a Create New button than I want to click on and select a new user that should be included in the table in the sub-tab.
When I click on the button I open a LOV-window. Here I select the user that I want to add.
In the LOV Action-class I save my new value in the database. Then in the method onLovUpdate I update the iterator with the new values from the database.
But in my GUI the subtab is not updated until I click on it.
But if I make the subtab the default subtab then it all works just fine and the GUI is updated directly.
Here is the code for the tableAction in the subtab. This code lies in an included UIX-page. Target is the table id.
<tableActions>
<button text="Create New" id=" createNewRollperson" accessKey="N">
<primaryClientAction>
<lovOpenWindowAction destination="FiskeRollpersonerLOV.do"
source=" createNewRollperson "
targets="joinedRollpersfiskeer message"/>
</primaryClientAction>
</button>
</tableActions>
Here is some code from the master UIX-page
<subTabLayout id="flikar">
<subTabs>
<subTabBar selectedIndex="${ui:defaulting(param.index,0)}">
<contents>
<link id="resorFlik" text="Resor"
disabled="${sessionScope.fiske.id == null}"
selected="${(param.source == 'resorFlik') or empty param.source}">
<primaryClientAction>
<firePartialAction event="changeTab" targets="flikar globalHeader">
<parameters>
<parameter key="source" value="resorFlik"/>
</parameters>
</firePartialAction>
</primaryClientAction>
</link>
<link id="rollpersonerFlik" text="Rollpersoner"
disabled="${sessionScope.fiske.id == null}"
selected="${param.source == 'rollpersonerFlik'}">
<primaryClientAction>
<firePartialAction event="changeTab" targets="flikar globalHeader">
<parameters>
<parameter key="source" value="rollpersonerFlik"/>
</parameters>
</firePartialAction>
</primaryClientAction>
</link>
</contents>
</subTabBar>
</subTabs>
<contents>
<switcher childName="${param.source}"
defaultCase=ResorFlik">
<case name="resorFlik">
<include node="${ctrl:parsePage(uix, 'includes/ResorFlik')}"/>
</case>
<case name="rollpersonerFlik">
<include node="${ctrl:parsePage(uix, 'includes/FiskeRollpersonerFlik')}"/>
</case>
</switcher>
</contents>
</subTabLayout>
What am I missing?? I cant have this subtab as the default subtab! Please help me with a solution!

hi,
Change the condition type to manual entry.
or
for example delivery costs will be different at the time of PO and actual delivery costs then at the time of invoice we select planned delivery costs and settle them first with the actual delivery cost.
Thanks & Regards,
Kiran

I can not update creative cloud. Stuck at 2% with the following message: attempted connection to the server ... I have a pc

hello
I can not update creative cloud. Stuck at 2% with the following message: attempted connection to the server ...
I have a pc
pls help me

restart your computer and retry.

How can I update my Mail program in 10.6.8 to iCloud Mail?

I am running 10.6.8 on my iMac, which is my work "workhorse." I can't update it to Lion because I can't afford to update Quark/Photoshop et al that I'd need. And it works fine.
I also have a Macbook Air running the latest Lion, as well as an iPod 5 running IOS7. Both access my iCloud mail address and folders/filtering set up on iCloud.
However, the Mail program on my iMac is still showing my MobileMe mailbox (and MobileMe is in my system preferences). I had an elaborate filtering-to-folders set up in Mail for my MobileMe account (not in the online MobileMe). I've disabled all the filtering in my Mail program, but iCloud still sends some mail to the older folders I had set up in the program, overriding the new folder-filtering I have set up on iCloud.
So, sometimes I'll get an email sent to my .me email address from a client which I cannot see on my Macbook Air (or iPod) because it's sent to a folder on my iMac. I'm semi-retired so don't do much work anymore so I'd rather not "fire up" the iMac unless I've work to do. But as it is with the Mail situation, I have to leave it on all the time or I can miss client email.
My question is, can I get delete my "mobileme" account in my iMac Mail program and then add my iCloud account to it? I assume the MobileMe in the iMac's system preferences is there for good, because I can't update to Lion. Will that fix my problem, or is that even do-able?
I'm not sure I've stated this clearly. I'm trying to get total coordination between my iMac, MB Air, and iPod mail accounts in the Mail programs of each device without having to resort to using iCloud mail online on my iMac. Perhaps that's unavoidable?
Any help appreciated. If clarification needed, I'll try to explain this better... Thanks all!
Nicol K

You can perfectly well access email in 10.6.8 - I'm doing it myself - and if you are receiving @me.com mail you are already doing so. the @icloud.com version of the address is exactly the same thing, and messages to it will arrive in the inbox alongside those to @me.com.
However if you have set up Rules to act on incoming @me.com mail it obviously won't act on @icloud.com messages, so you will have to duplicate the Rules if you want to keep them.
If you want to try starting over you can delete the account and set it up again, using the method described here:
Entering iCloud email settings manually in Snow Leopard or Leopard
You can't access other iCloud facilities in Snow Leopard but if all you are interested in is the email you have no need to upgrade to Mountain Lion.

Can I update my licensed Acrobat 8.0 Standard somehow? If so, please tell me how to do it.

Can I update my licensed Acrobat 8.0 Standard somehow?
If so, please tell me how to do it.
Thank you.

You need at least Acrobat 9 to be eligible for upgrades, so it's a moot point. Simply buy a new license of a current version.
Mylenium

Can't update USBPORT.SYS

Similar Messages

Maybe you are looking for