Can't update vault after upgrading to aperture 3

I upgarded from aperture 2 or 3. When I go to update my vault it says "The vault "Aperture" could not be updated because the file system of the vault's volume is not supported."
The vault is located on my external HDD, formatted fAT32. It's always worked with w/ Aperture 2 just fine...

Try formatting a disk for OSX and using it with a Windows machine. Try using a Windows machine to format a disk for OSX. IOW: at least OSX will read and write FAT32. IMHO your vault should be on a dedicated drive anyway.
DLS

Similar Messages

Can't update apps after upgrading to iOS 8 on ipad air

can't update apps after updating to iOS 8 on iPad air

There are 2 ways to fix the issue:
1) Disable mod_spdy
2) Push Apple to fix Safari 8, b/c the problem exists in both iOS and desktop versions

I can't update packages after upgrading pacman to 4.0.3

I know this was already treated broadly about two months ago, but I can't update after upgrading pacman because of continuous problems with certain signatures (at least one).
I have already tried this:
rm -rf /etc/pacman.d/gnupg
pacman -Scc
pacman-key --init
pacman-key --populate archlinux
But I still get this error when trying to upgrade the system:
error: virtuoso: signature from "Andrea Scarpino (Arch Linux) <[email protected]>" is invalid
error: failed to commit transaction (invalid or corrupted package)
Errors occurred, no packages were upgraded.
Could anybody help me? I'm pretty devastated with this.
Thanks!
My /etc/pacman.conf
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
#GPGDir = /etc/pacman.d/gnupg/
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/curl -C - -f %u > %o
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#CleanMethod = KeepInstalled
Architecture = auto
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options
#UseSyslog
#UseDelta
#TotalDownload
CheckSpace
#VerbosePkgLists
# By default, pacman accepts packages signed by keys that its local keyring
# trusts (see pacman-key and its man page), as well as unsigned packages.
#SigLevel = Optional TrustedOnly
# NOTE: You must run `pacman-key --init` before first using pacman; the local
# keyring can then be populated with the keys of all official Arch Linux
# packagers with `pacman-key --populate archlinux`.
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# - URLs will have $arch replaced by the name of the architecture
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.
#[testing]
#SigLevel = PackageRequired
#Include = /etc/pacman.d/mirrorlist
[core]
SigLevel = PackageRequired
Include = /etc/pacman.d/mirrorlist
[extra]
SigLevel = PackageRequired
Include = /etc/pacman.d/mirrorlist
#[community-testing]
#SigLevel = PackageRequired
#Include = /etc/pacman.d/mirrorlist
[community]
SigLevel = PackageRequired
Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#SigLevel = Optional TrustAll
#Server = file:///home/custompkgs
Last edited by [DoodoM] (2012-08-03 23:39:56)

Thanks everyone! I guess it was a faulty mirror.
I also had problems upgrading glibc because /lib had to be linked to /usr/lib, but I fixed it seeking for helpful tips on the forum. What I did was move everything from /lib to /usr/lib, shutdown, start adding break=postmount to kernel line, mount the filesystem, remove /lib folder, link /usr/lib to /lib and reboot. Then I reinstalled glibc and everything went well.
Now some fonts look half-cutted in Gnome Shell when the window or panel which contains them is in background and I don't know why. But it is not the first time I have "graphical artifacts" with Arch Linux on this laptop. I think has something to do with the compositing.

I can't update iPhoto after upgrading to Mavericks

I have searched everywhere for my iLife '11 disc and can't find it. App Store says I must update iPhoto, iMovie etc, but won't accept my Apple id. Can't talk to apple support without first agreeing to pay $60!!. Can someone tell me what to do next??

App Store says I must update iPhoto, iMovie etc, but won't accept my Apple id.
If your versions of iPhoto, etc have been installed using a different AppleID, then you have to ask the person who installed it to authorize the update.
Or uninstall the current versions and buy the updatetd versions.
If you are sure, that the versions have been accepted to your current AppleID, there may be aproblem with your AppleID. Sometimes an AppleID will be disabled for use with the AppStore for security reasons. Do you get an error message, that indicates a problem with your AppleID?

I can't update iPhoto after upgrading to Yosemite.

When I attempt to update iPhoto I get the message, "Unable to update with this Apple ID" "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."
I did not purchase iPhoto via the App Store, it was installed on my iMac when I purchased it. How can I get iPHoot working again?

This error message will appear erraneously, if you skipped the update to Mavericks and iPhoto 9.5.1 and went straight from an earlier MacS X version to Yosemite, without first updating to iPhoto 9,5.1 and associating it to your AppleID.
Try first to buy iPhoto with your AppleID, as Kappy suggested. Delete iPhoto from Applications, but don't empty the Trash, then go to the main page of the App Store and search for iPhoto. If you are lucky, it will show as free and you can buy it directly.
If it is not showing as free, there is no help but contacting the App Store Support: Ask for a redemption code. You will need to provide a prove of purchase for your mac with iPhoto preinstalled.
http://www.apple.com/support/mac/app-store/contact/

Can't update Norton after upgrading to Lion...holding 3 and 2 during startup didn't correct issue (Lion is 64 bit)

how do i get my older mac to allow norton to update virus definitions...error says i need to startup with 32 bit kernel but i tried it and still can't do it (i held 3 and 2 down during startup per Apple.com instructions)

I meant to include this info from the System Profile:
Maybe easier to read:
Canon MF4400 Series:
Status:          Idle
Print Server:          Local
Driver Version:          1.1.0
Default:          Yes
Shared:          Yes
URI:          usb://Canon/MF4400%20Series?serial=0122F5200302
PPD:          Canon MF4400 Series
PPD File Version:          1.1.0
PostScript Version:          (3010.000) 550
(3010.000) 651
CUPS Version:          1.6svn (cups-327)
Scanning support:          Yes
Scanning app (bundleID path):          -
Scanning app version:          -
Scanner UUID:          00000000-3031-3232-4635-323030333032
Printer Commands:          none
CUPS filters:
capdftopdl:
Path:          /Library/Printers/Canon/CUPS_MF_Printer/Bins/capdftopdl
Permissions:          rwxr-xr-x
Fax support:          No
PDEs:
BasicSettingsPDE.plugin:
Sandbox compliant:          Yes

After upgrading to Aperture 3 I had to 'upgrade' all files. When this was done, there was an Aperture 3 library and the original Aperture 2 library. Are the two libraries identical and can I safely trash the Aperture 2 library?

After upgrading to Aperture 3 I had to 'upgrade' all files. When this was done, there was an Aperture 3 library and the original Aperture 2 library. Are the two libraries identical and can I safely trash the Aperture 2 library?

If the upgrade completed successfully and you are running Aperture 3 on the converted library and you're sure all the images that were in the old library are in the new library then you could delete the Aperture 2 library.
However I'm the paranoid type and when it comes to deleting images I'm always hesitant. If you can fine a place to archive the old library that would be your a better option.
At a minimum I would keep the old library around for a month or so after switching to Aperture 3 just to make sure in case something pops up.
regards

After upgrading to Aperture 3.4 it doesn't open anymore.

After upgrading to Aperture 3.4 it doesn't open anymore. Every listed suggestion in forums did not help.
After repairing till 99% Aperture closed. It happened with all my libraries, small and great. All of them can be opened in iPhoto.
After placing aperture.app to the trash can and putting it back to programs again, after a restart, I even couldn't find in preferences com.apple.aperture.plist file anymore. Apple please help!

After placing aperture.app to the trash can and putting it back to programs again,
How did you put it back to programs? The idea is to make a complete reinstall
The problem is:
There is a problem with the Aperture installer. In some cases the installation is not complete, if you update on top of a recent version.
For most posters here (there must be 20 and more discussions by now) it helped to reinstall Aperture after removing the Application from the Applications Folder and the reinstalling again.
If you installed Apperture initially from the boxed retail version, reinstall from the CD/DVD.
If you installed from the AppStore, download again from the AppStore.
If you unlocked the Trial or bought online previous to the AppStore, use the saved installer or download the Trial again.
http://appldnld.apple.com.edgesuite.net/content.info.apple.com/Aperture/061-8328 .20101020.AprE3/ApertureTrial3.1.dmg
Upgrade immediately after installing the previous version; you cannot open your current library with the previous version.
Regards
Léonie
Just for the record:
To remove the preferences:
The Preferences are in your User Library, Preferences folder:
The User Library is hidden by default. You can reveal it from the Finder's "GO" menu:
Finder > Go, then hold down the options ⌥ key, until the Library appears in the drop-down menu, select it and open the Library folder. Then go to the "Preferences" sub folder and remove the file
your Home Folder/Library/Preferences/com.apple.Aperture.plist.
But I'd try to reinstall first - removing the preferences will only be a temporary fix, and the crashing may occur again, if you do not fix the broken Aperture installation.

I have an Epson Perfection V100 scanner and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

I have an Epson Perfection V100 scanner and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

Check the Epson web site for updates to drivers and Epson scan software.

HT3669 I have an Epson Perfection V100 and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

I have an Epson Perfection V100 and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

Check the Epson web site for updates to drivers and Epson scan software.

I can't use firefox after upgrading to 4.0. I get the message I have to restart my computer for upgrading, but ik doesn't start. I get the message over and over

I can't open firefox after upgrading to 4.0
I get the message over and over again that i have to restart my computer for upgrading to firefox.
I tried new installation. But i got problems on all my accounts

Start your '''Computer''' in safe mode. Then start Firefox. Try '''Safe''' web sites.
Starting The Computer In Safe Mode;
If running, turn your computer off.
Remove any disks and thumb drives that are in your hard drives or ports.
Now start your computer but also;
'''Windows; '''Press the <F8> key repeatedly.
'''Mac: '''Hold down the Shift key.
'''Linux; '''Using the command line, Linux/Unix computers can be booted
into various run levels that determine which resources are loaded.
For example, "runlevel 1" is typically the equivalent to Windows and
Mac safe modes.
* Source; '''[http://encyclopedia2.thefreedictionary.com/Linux+Safe+Mode Safe Mode; Free Online Encyclopedia]'''
When the '''Boot''' menu is displayed, release the key you were pressing.
You must now choose what mode to use. The most used are;
* Safe Mode; The computer runs with only a minimum set of programs.
* Safe Mode '''With '''Networking; Same as above, but with internet access.

I can't update iPhoto after installing OSX 10.9.2, it has the name otto@**** in the apple ID box and will not let me change it. Any thoughts?

Hello people,
I can't update iPhoto after installing OSX 10.9.2, it has the name otto@**** in the apple ID box and will not let me change it. Any thoughts?
Thanks
<Email Edited By Host>

You installed a hacked app, originally from the Mac App Store. It contains the receipt for a different app, downloaded using an account that you don't control. You need to identify and remove the hacked app.
Important: The app you need to remove is not necessarily the one named in the App Store alert. For example, the App Store may prompt you to update "Angry Birds" or "Twitter," but the hacked app may be something else entirely. Don't make any assumptions about which app you're looking for. To find it, you must carry out a systematic search with Spotlight.
1. Triple-click anywhere in the line of text below on this page to select it:
kMDItemAppStoreHasReceipt=1
Copy the selected text to the Clipboard by pressing the key combination command-C.
2. In the Finder, press command-F to open a search window, or select
File ▹ Find
from the menu bar. In the search window, select
Search: This Mac
from the row of tokens below the toolbar. Below that is a popup menu of search criteria, initially showing Kind. From that menu, select
Other...
A sheet will drop down. In that sheet, select
Raw Query
as the criterion, then click OK or press return.
Now there will be a text box to the right of the menu of search criteria. That's where you enter the raw search query. Click in that box and paste the text you copied earlier by pressing command-V.
4. The search window will now show all the App Store products that are installed. Compare those search results with the list of your purchases from the App Store. To see the complete list, you may need to unhide hidden purchases. If any apps were download from the App Store using other Apple ID accounts that you control, sign in to the store under each of those ID's and check the purchases.
At least one of the apps in the Spotlight search results is not among your purchases in the App Store. Move each such item to the Trash, after quitting it if it's running. You may be prompted for your administrator password. Empty the Trash.
Quit and relaunch the App Store. Test.
If you find these instructions confusing, ask for an alternative method.

Can't launch color after upgrading to OS 10.5

I can't launch color after upgrading to OS 10.5. The message shows " Unable to initialize OpenGL. Make sure Video Desktop is disable." Can anyone help please?

Click here and follow the instructions.
(46092)

Can´t open LR after upgrade to 5.3 without entering a licens key

Can´t open LR after upgrade to 5.3 without entering a licens key

I have seen comments from someone who indicated that every time they started Lightroom they were prompted for the serial number, even though they had already entered it. Is this your situation? I can't remember what the solution is, but I have seen that problem mentioned in the past.

Can't open Pages after upgrading to snow leopard on 10.6.8

Can't open Pages after upgrading to snow leopard on 10.6.8

Has Spotlight finished its indexing? Check in the upper right. If you get just the search field, it has, if it says its indexing, you have to wait before you can use anything.

Can't update vault after upgrading to aperture 3

Similar Messages

Maybe you are looking for