Can't upgrade an 1811 router

this is probably an easy one for all of you folks...
trying to upgrade an 1811 to the latest firmware.
my diag...
Slot 0:
C1811 2FE V92 Mainboard Port adapter, 13 ports
Port adapter is analyzed
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
Base MAC Address : 0015.f9c7.58c6
PCB Serial Number : FO*********
Hardware Revision : 4.0
Processor type : 93
Part Number : 73-9165-12
Board Revision : A0
Deviation Number : 0
Fab Version : 04
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
MAC Address block size : 18
Chassis Serial Number : FT*********
Product (FRU) Number : CISCO1811W-AG-B/K9
Version Identifier : V12
Radio Country Code : 0020
Top Assy. Part Number : 800-26455-11
CLEI Code : CMME700BRA
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF CF 06 00 15 F9 C7 58 C6 C1 8B 46 4F 43 30
0x10: 39 34 32 30 31 46 30 40 04 9C 41 04 00 09 93 82
0x20: 49 23 CD 0C 42 41 30 88 00 00 00 00 02 04 03 00
0x30: 81 00 00 00 00 04 00 43 00 12 C2 8B 46 54 58 30
0x40: 39 34 38 59 30 39 50 CB 92 43 49 53 43 4F 31 38
0x50: 31 31 57 2D 41 47 2D 42 2F 4B 39 89 56 31 32 00
0x60: D9 02 40 C1 4A 00 20 C0 46 03 20 00 67 57 0B C6
0x70: 8A 43 4D 4D 45 37 30 30 42 52 41 FF FF FF FF FF
0x80: 80 00 4F C4 80 20 FC A0 80 00 4F D4 00 00 00 00
0x90: 00 00 00 00 00 00 00 61 80 00 4F EC 80 21 00 94
0xA0: 80 00 4F EC 00 00 00 01 80 00 50 7D 00 00 00 61
0xB0: 80 00 4F FC 80 20 FC A0 80 00 4F FC 00 00 00 0D
0xC0: 80 00 50 1C 80 26 1C D8 80 00 4F 7C 00 00 00 01
0xD0: 80 00 50 1C 80 4A 00 00 80 4B B5 C4 80 4C 00 00
0xE0: 80 00 50 FC 80 20 9F A8 80 20 9E D4 20 00 00 08
0xF0: 02 00 92 20 80 00 50 1C 00 00 00 00 00 00 00 00
0x100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x110: FF 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x120: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01
0x130: 80 00 53 F8 80 4A 00 00 80 4B B5 C4 80 00 50 7C
0x140: 61 00 50 8C 00 00 00 69 80 00 50 9C 80 21 00 94
0x150: 80 00 50 9C 00 00 00 69 00 00 00 1D 80 00 51 A4
0x160: 80 00 50 AC 80 26 25 88 80 00 50 B4 00 00 00 00
0x170: 00 00 00 00 00 00 00 63 80 00 50 CC 80 21 00 94
0x180: 01 00 00 00 00 00 00 01 80 00 51 5D 00 00 00 63
0x190: 80 3D FF E4 00 00 00 00 00 00 00 00 80 3D FF C4
0x1A0: 00 00 00 00 00 00 00 00 80 00 51 04 00 00 00 00
0x1B0: 00 00 00 00 00 00 00 00 80 4B B5 C4 80 4C 00 00
0x1C0: 80 00 51 DC 80 20 9F A8 80 20 9E D4 20 00 00 08
0x1D0: 02 00 92 20 80 00 50 FC 00 00 00 00 00 00 00 00
0x1E0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x1F0: FF 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Dual Band 802.11 A+B/G Radio Access Point
802.11 Radio0 EEPROM contents
Controller Type : 04C1
Hardware Version : 0100
Part Number : 74-3624-01
Serial Number : FO*********
EEPROM contents (word address: hex):
0x0080: 0602 2201 0205 8D80 005B 0522 4002 8954
0x0088: 2200 0205 1B00 00B7 0522 8002 12A8 2201
0x0090: 0205 3600 016E 0522 0002 2551 2202 0205
0x0098: 6C00 02DC 0522 8002 37F9 2203 0205 A200
0x00A0: 04C1 0100 2801 4A0E 0020 0020 0020 0020
0x00A8: 0020 0020 0020 0020 0020 0020 0020 0020
0x00B0: 3341 3153 3433 3039 4F43 FF46 0000 0000
0x00B8: 0000 0000 0000 0000 0000 0000 0000 0010
802.11 Radio1 EEPROM contents
Controller Type : 04C1
Hardware Version : 0100
Part Number : 74-3624-01
Serial Number : FO*********
EEPROM contents (word address: hex):
0x0080: 0602 2201 0205 8D80 005B 0522 4002 8954
0x0088: 2200 0205 1B00 00B7 0522 8002 12A8 2201
0x0090: 0205 3600 016E 0522 0002 2551 2202 0205
0x0098: 6C00 02DC 0522 8002 37F9 2203 0205 A200
0x00A0: 04C1 0100 2801 4A0E 0020 0020 0020 0020
0x00A8: 0020 0020 0020 0020 0020 0020 0020 0020
0x00B0: 3341 3153 3433 3039 4F43 FF46 0000 0000
0x00B8: 0000 0000 0000 0000 0000 0000 0000 0010
just seems to always boot back to the original file and not the one i just tftp'd up. could it be that this router requires additional ram to support this ios?
file that i tftp'd to flash was
c181x-adventerprisek9-mz.151-4.M3.bin

Johnathan,
When you say your are "telling"  your router to boot to the new file and it is not, when it does boot do you see any errors listed during the boot-up sequence?
Based on your comments can I assume you have a command in your configuration file that looks something like the following:
boot system flash:c181x-adventerprisek9-mz.151-4.M3.bin or at least something along these lines?
If you have two bin files in your flash, the router will boot to the first one it sees listed consistantly. if the new bin file is the last in line, it will never be called to load.
If you are concerned about not having a working bin file to fall back onto, then save your working bin file to a tftp location. As a minimum if the router has issues with your new bin file, it will boot to rommon and you can get the working bin file back into the router from there.  If you had memory limitations, you would have received an error of some sort during the tftp'ing of the new bin file that there was not enough room. Have you done an MD5 check to see if the bin file did infact transfer sucessfully?
http://www.cisco.com/web/about/security/intelligence/iosimage.html

Similar Messages

  • Can I upgrade an E1200 router to support Mavericks?

    I have a Mac and upgraded to Mavericks.  Now when I go to Cisco Connect, I get a message that says "Unsupported Operating System   The router software supports these operating systems: Mac OS X 10.5.8 or later, 10.6.1 or later, 10.7 or later"   What seems odd is that my computer is still connected wirelessly but our Samsung Smart TV is not.  Can my E1200 router be upgraded to 10.9?  I also had a problem with my Canon scanner not scanning and by uninstalling and reinstalling the problem was fixed.  Any chance uninstalling and reinstalling would work here?

    You cannot upgrade but if you need to get into your Lynskys router account to change your settings, passwords and all other options. Use the 'Opera' Browser (If you don't have it, download it for free) The default IP address is 192.168.1.1. Paste it in your browser and enter. It will ask you for your username and password. You will be in, and able to do anything you were able to do with the old software.
    Note. If you have OS X 10.9.1 Mavericks  It will NOT work on Safari, Firefox, or Chrome.

  • Can't upgrade router firmware

    I want to upgrade the firmware in my BEFW11s4 v4.  Have already downloaded the file but when I click upgrade the page goes blank and nothing happens.  What am I doing wrong?

    i think firmware has been upgraded on the router... logon to router's setup page and click on the status and check whether the latest firnmware is installed or not, if you you found old firmware on the router try upgrading firmware using tftp utility...go to ftp.linksys.com/pub/network and download tftp.exe file and try upgrading firmware check whether it makes any difference or not.

  • Hi,please suggest me some games for Compaq CQ62-105TU Laptop.Can I upgrade my laptop's graphics card

    Hi,please suggest me some games for Compaq CQ62-105TU Laptop.Can I upgrade my laptop's graphics card

    Unfortunately, you cannot upgrade the processor or graphics card on this laptop.
    Here is a page from CPU-World that gives the specs for your processor:
    http://www.cpu-world.com/CPUs/Bobcat/AMD-E%20Series%20E2-1800.html
    You will see down near the bottom of the page that it is not upgradeable. Some laptops come with the processor soldered to the motherboard. Almost all laptop graphics are this way. The only way that you would be able to get a faster processor/better graphics for this laptop would be to purchase a brand new motherboard. You can do an Ebay search for 'HP G6 motherboard' to see what average prices are if you want to go this route.

  • Can I Upgrade my OS or Should I Buy New Laptop?

    OK, so I have been out of the Apple loop for quite some time. This laptop is from 2008. I love it, but the OS is too old. I can't update Firefox or download Chrome. I am a student and need to figure out a solution very very soon as Fall quarter starts next week. The college uses a site that doesn't work well with Safari, it prefers Chrome. So, I can't use my computer to do work. So, a few questions:
    1. Can I upgrade OS? If so, how? Are there problems with this?
    2. Should I just buy a new MacBook Air from Apple?
    3. I have considered buying a MacBook Air used from Ebay, Amazon or Craigslist. Please tell me if you think this is a good or bad idea and why? What to look for on used computer? Being a student, I am obviously trying to save as much money as possible. Some say Ebay is good because of the great buyer protection. Please tell me your thoughts.
    I don't use the computer for anything other than school work and searching the web. I don't need anything fancy.
    Any insight is greatly appreciated. Thank you very much!

    It's a good idea to hash this out with someone at the Apple Store, who can show you the latest gear and its advantages/disadvantages. My responses are only mine; I hope others will chime in.
    1. Upgrade or update? You can't upgrade the OS, but every year, Apple updates the OS and offers features that can be quite appealing. I haven't experienced any problem with updates.
    2. You can buy a new MBA from Apple, but I strongly suggest looking at refurbs; just as good, at a reduction in price.
    3. You're safe with Amazon for the most part, though the price is nearly always retail. You can get a good machine on eBay, but it helps if you know your values and contact the seller before bidding. I don't trust Craigslist. Realize, however, that an eBay item probably won't have much or any of the original warranty, and some sellers may unload less-than-perfect machines. If you to the eBay route, insist on the return period if the machine seems to have problems.
    Features you should be aware of? SSD disk size - how much space do you need? Screen size - do you want 11" or 13"? Battery issues - don't expect long battery life, though the 2013 shows an improvemen; assume you'll be using the wall adapter a lot.

  • I have an Iphone 4S on ios7.0.3 and am attempting to use airplay with an airplay enabled AV receiver from Pioneer (VSX-53). I also recently upgraded my wireless router. I no longer get the airplay icon on my iphone? Any suggestions?

    I have an iphone 4S on ios 7.0.3 and am attempting to use airplay with an airplay enabled AV receiver (Pioneer VSX-53). I also recently upgraded my wireless router and the roouter is working fine with the five elements on the network. Prior to the upgrade to 7.0.3 and the router upgrade the airplay feature working fine and i was able to consistently use airplay to stream music th the AV receiver. After the upgrades the airplay icon no longer appears on my iphone or on my macbook running itunes. Any suggestion on how to trouble shoot the missing airplay icon is much appreciated.

    Hi there,
    You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
    You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
    Thanks, let me know if the update helps,
    Nathan

  • I am upgrading wi-fi router from Airport Express to Airport Extreme. I followed set up instructions yet I am still getting the flashing amber light and cannot setup (using manual setup or the continue button).  What should I do??

    Hello,
    I am upgrading my wireless router from an Airport Express to an Airport Extreme.  After disconnecting the Express and plugging the Extreme via ethernet cable to the modem, I am receiving a flashing amber light after connecting the power source.  I also reset the modem while the Extreme was still powered and plugged into the modem, but no luck.  I also tried resetting the modem and the Extreme and still no resolution.  Please advise.  Thank you!

    This error usually occurs when the Windows Firewall and/or anti-virus software blocks the connection attempt from the PC to the AirPort Extreme.
    Microsoft Security Essentials can do the same thing.
    Things would be much easier if you had a Mac or iPhone or iPad to set up the AirPort Extreme. Otherwise try turning off the Windows Firewall and Anti-Virus programs, etc on the PC.
    Restart the PC, then see if the PC can contact the AiPort Extreme. It will likely help to connect an Ethernet cable from the PC to one of the LAN <-> ports on the AirPort Extreme. You can disconnect the Ethernet cable once the AirPort Extreme has been configured.
    Re-enable the Windows Firewall, Anti-Virus, etc and restart the PC.

  • I can't connect to the router in my home.  Things were working fine as usual - I attended school and connected to their WiFi network as usual.  When I returned home I could not connect to my own home router.  The Ipad seeks the network but nothing happens

    I can't connect to the router in my home.  The Ipad seeks the network but nothing happens.  I went to school and connected to their WiFi network as usual with no problems.  When I returned home I could not connect to my home router.  The Ipad seeks the router number but nothing happens.  I rebooted the Ipad a few times in the school.  The numbers identifying the router, etc. on my Ipad no longer appear there. 
    TThe Ipad guide says to connect to the WiFi use setup but I can't find the setup program in the Ipad.
    I reset the network settings to the factory defaults but this doesn't fix the problem.
    What can I do to reconnect to my home router?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Classic won't start, can't upgrade, and other problems...

    There's something not quite right with my Mac, and I can't quite pinpoint it. Because of this, I'm not even certain I'm posting this in the right forum! Here's the situation:
    I have a PowerMac G4, upgraded with a an extra hard drive, an ATI Radeon Pro graphics card, a Sonnet Duet G4 Dual 1.8GHz processor, and (as of today, prior to this 10.4.7) am running OSX 10.4.8.
    When I got the machine, it came with OS 9.1 installed. I later upgraded to 9.2.2, and then eventually to OSX. My Classic system folder stayed at 9.2.2
    About 10 days ago I installed the Sonnet processor upgrade. In order to do so, I had to rejig my system a bit, as the installer for the upgrade only works in 9.2 and not Classic (yeah, bad call on Sonnet's part).
    I partitioned my Back-Up drive, and installed 9.2 on it, installed the software for the processor, and then the processor itself. After checking everything worked, I then unpartitioned my Back-Up drive and removed OS9.2.
    Although the processor works fine, and has doubled the speed of most tasks, ever since it was installed, I have been prone to crashes. Most often when working with large files in various applications such as Photoshop.
    Also, Classic won't start now. I hardly ever use Classic these days, only for one or two tiny programs I could live without, but the fact that it refuses to start is niggling me. I reinstalled OS9.1 from my original disk, and now I can't upgrade to 9.2: all that happens is I get a message saying that I have 9.1 and that it is recommended I upgrade to 9.2! But Classic won't open, so I can't upgrade to 9.2.
    The next thing that's started happening is that my broadband connection keeps dropping. This never happened before. This is happening so frequently it's really annoying; the only thing that cures it is a restart, but restarting 10 times a day isn't funny. I'm using an Alcatel Speedtouch ADSL modem. This has worked fine for over a year.
    Yesterday I tried setting up a wireless connection with a Belkin router, replacing my USB modem, so my wife can use her Windows laptop to surf from the same broadband connection (my Mac doesn't need to be wireless enabled itself). But this hasn't worked, even though we followed the instruction manual exactly. I suspect that the reason this hasn't worked was because of the underlying problem on my Mac, whatever it is. I've gone back to using the Speedtouch modem to connect to the internet for now.
    I've just today done a complete system reinstall of OSX 10.4, and downloaded the upgrade to 10.4.8, in an effort to solve this. Unfortunately, my Mac still seems to be in the same state and it hasn't solved anything. Classic still won't open, the connection still keeps dropping, and I'm almost at the point of kicking the **** thing through a window! Please, has anyone got any bright ideas? I don't know where to start....
    G4 Digital Audio   Mac OS X (10.4.8)  

    Hi, thanks for responding.
    I've made a couple of changes, double-checked everything, and I have to say that now 10.4.8 has been on my machine for a few days, it's a lot more stable. No crashes. Maybe it just needed to "settle in", ha ha. I also got a router and went wireless, something I needed to do so my wife could use her laptop to get online. This seems to have solved the connection dropping.
    So the only thing left is not being able to open Classic. I think maybe you're right, and the new processor doesn't like Classic. But, to tell the truth, I hardly ever use Classic anymore, and I can live without it. So I think I'll leave everything as it is for now, unless something major happens. I spent nearly £500 on the processor upgrade, and it has doubled the speed of my Mac: I really don't want to have to take it out:-)

  • Can I upgrade my IPad 1G from IOS 4.2.1 to IOS 4.3, Can I upgrade my IPad 1G from IOS 4.2.1 to IOS 4.3

    Can I upgrade my IPad 1G from IOS 4.2.1 to IOS 4.3
    Please tell me if is possible

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
     Cheers, Tom

  • Can I upgrade my PowerBook G4 to work with a new wireless HP printer?

    Can anyone tell me how to upgrade mu PowerBook G4 so I can print wireless to a new HP printer?  Can I upgrade to a newer operating system?

    The latest operating system that the Powerbook can use is Leopard 10.5.  If you plan to upgrade, in the US call the Apple online store at 800-MY-APPLE soon, as they still had some Leopard in stock as of a few weeks ago.
    The HP wireless printer is just another device on your wireless router network. If your Powerbook uses a wireless internet connection today, then the only thing you may need to do is to install an HP wireless printer driver, if there is one for whatever level of OS X you have. Check this HP page for a driver:  http://www8.hp.com/us/en/support-drivers.html

  • My iPad mini iOS version is 6.0.2  I can't upgrade to iOS 7.  Message displayed is "Verification of update failed because you are no longer connected to the internet."  This happens while I am connected to the internet.  What should I do?

    My iPad mini iOS version is 6.0.2 which I can't upgrade to iOS 7.  Message displayed during verifying upgrade is "Can't verify upgrade because you are no longer connected to the internet". This happens again and again though I am connected to the internet through wifi.  What should I do?

    Reset the iPad and try again. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    Reset your router and try again. Unplug your router from power for about 30 seconds then plug it in again.
    Try another WiFi Network. Go to a friend's house, a library, anywhere else that you can use a trusted WiFi network.
    Try updating using iTunes on your computer.

  • I can't upgrade software from App Store on Macbook air 2013mid Yosemite beta

    Hello, I'm just writing this because i can't upgrade my Macbook air 2013mid from Yosemite beta to alpha version of Yosemite, i can't update iTunes from App Store - i have to upgrade it only via apple.com download, i did not receive any updates and when i try to hit tab Updates in Appstore it says that there is a problem with swscan.apple.com certificate. Please guys, help me

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Can't upgrade Catalyst 2960S-48LPS-L to 15.0.2X

    I just purchased a new 2960S-48LPS-L. I can't upgrade it past 15.0.1-SE3. If I try to go any newer with the firmware it gives a licensing error. Then it boots into a cut mode of the IOS. Below is a copy of the licensing error after it boots to a newer IOS. The same error also appears in the switch log.
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    Press RETURN to get started!
    *Mar  1 00:00:09.332: Read env variable - LICENSE_BOOT_LEVEL = Mar 30 01:27:38.047: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c2960s_lanbase Next reboot level = lanbase and License = No valid license found Mar 30 01:27:38.062: %LINK-4-NOMAC: A random default MAC address of 0000.0c8a.5700 has
      been chosen.  Ensure that this address is unique, or specify MAC
      addresses for commands (such as 'novell routing') that allow the
      use of this address as a default.
    Mar 30 01:27:39.352: %SYS-5-RESTART: System restarted -- Cisco IOS Software, C2960S Software (C2960S-UNIVERSALK9-M), Version 15.0(2)SE6, RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2014 by Cisco Systems, Inc.
    Compiled Wed 09-Apr-14 03:09 by prod_rel_team

    The switch does load the 15.0(2)SE6 and comes up to that prompt showing that there is no valid lanbase license. At that point it comes up to a cut version of the IOS it only shows a couple of enable and configuration commands (not the full list). It won't let me save the running configuration, it  also won't let me reboot the switch through the reload command. Due to it not being able to access the startup-config. The switch works perfectly running IOS 15.0(1)SE3 and below.
    It gives the below errors while running IOS 15.0(2) and newer:
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    Switch>ena
    Switch#wr mem
    startup-config file open failed (No such device)
    Switch#
    Mar 30 01:31:51.514: %SCHED-7-WATCH: Attempt to lock uninitialized watched semaphore (address 0). -Process= "Exec", ipl= 0, pid= 3
    -Traceback= 37D834z 12F94B8z 38645Cz 38670Cz 3325F4z 2D049Cz 2D66BCz 2E5D00z 1C2CCE8z 1C27298z
    Switch#reload
    Proceed with reload? [confirm]
    The startup configuration is currently being updated. Try again.
    Switch#
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    Anyways here is the show version from the switch when it is trying to run the 15.0(2)SE6 IOS. As you can see the Show License is not an available command in the cut IOS.
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    Switch#show ver
    Cisco IOS Software, C2960S Software (C2960S-UNIVERSALK9-M), Version 15.0(2)SE6, RELEASE SOFTWARE (fc2)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2014 by Cisco Systems, Inc.
    Compiled Wed 09-Apr-14 03:09 by prod_rel_team
    ROM: Bootstrap program is C2960S board boot loader
    BOOTLDR: C2960S Boot Loader (C2960S-HBOOT-M) Version 12.2(55r)SE, RELEASE SOFTWARE (fc1)
    Switch uptime is 8 minutes
    System returned to ROM by power-on
    System restarted at
    System image file is "flash:c2960s-universalk9-mz.150-2.se6.bin"
    cisco WS-C2960S-48LPS-L (PowerPC) processor (revision D0) with 131072K bytes of memory.
    Processor board ID
    Last reset from power-on
    The password-recovery mechanism is enabled.
    512K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address       : 3C:0E:23:4A:EF:00
    Motherboard assembly number     : 73-12423-06
    Power supply part number        : 341-0328-02
    Motherboard serial number       :
    Power supply serial number      :
    Model revision number           : D0
    Motherboard revision number     : A0
    Model number                    : WS-C2960S-48LPS-L
    Daughterboard assembly number   : 73-11933-04
    Daughterboard serial number     :
    System serial number            :
    Top Assembly Part Number        : 800-32448-02
    Top Assembly Revision Number    : C0
    Version ID                      : V04
    CLEI Code Number                : COMCU00ARD
    Daughterboard revision number   : A0
    Hardware Board Revision Number  : 0x01
    Configuration register is 0xF
    Switch#show license
                  ^
    % Invalid input detected at '^' marker.
    Switch#show run
    Unable to get configuration. Try again later.
    Locked by -1
    Unable to get configuration. Try again later.
    Locked by -1
    Switch#
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    Here is the version and license output when the switch is functioning properly with the 15.0(1)SE3 Loaded:
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    Switch#show ver
    Cisco IOS Software, C2960S Software (C2960S-UNIVERSALK9-M), Version 15.0(1)SE3, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2012 by Cisco Systems, Inc.
    Compiled Wed 30-May-12 14:35 by prod_rel_team
    ROM: Bootstrap program is Alpha board boot loader
    BOOTLDR: C2960S Boot Loader (C2960S-HBOOT-M) Version 12.2(55r)SE, RELEASE SOFTWARE (fc1)
    Switch uptime is 13 minutes
    System returned to ROM by power-on
    System image file is "flash:c2960s-universalk9-mz.150-1.se3.bin"
    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    agree to comply with applicable laws and regulations. If you are unable
    to comply with U.S. and local laws, return this product immediately.
    A summary of U.S. laws governing Cisco cryptographic products may be found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    If you require further assistance please contact us by sending email to
    [email protected].
    cisco WS-C2960S-48LPS-L (PowerPC) processor (revision D0) with 131072K bytes of memory.
    Processor board ID
    Last reset from power-on
    1 Virtual Ethernet interface
    1 FastEthernet interface
    52 Gigabit Ethernet interfaces
    The password-recovery mechanism is enabled.
    512K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address       : 3C:0E:23:4A:EF:00
    Motherboard assembly number     : 73-12423-06
    Power supply part number        : 341-0328-02
    Motherboard serial number       :
    Power supply serial number      :
    Model revision number           : D0
    Motherboard revision number     : A0
    Model number                    : WS-C2960S-48LPS-L
    Daughterboard assembly number   : 73-11933-04
    Daughterboard serial number     :
    System serial number            :
    Top Assembly Part Number        : 800-32448-02
    Top Assembly Revision Number    : C0
    Version ID                      : V04
    CLEI Code Number                : COMCU00ARD
    Daughterboard revision number   : A0
    Hardware Board Revision Number  : 0x01
    Switch Ports Model              SW Version            SW Image
    *    1 52    WS-C2960S-48LPS-L  15.0(1)SE3            C2960S-UNIVERSALK9-M
    Configuration register is 0xF
    Switch#show lic
    Index 1 Feature: lanlite
            Period left: 0  minute  0  second
    Index 2 Feature: lanbase
            Period left: Life time
            License Type: Permanent
            License State: Active, In Use
            License Priority: Medium
            License Count: Non-Counted
    Switch#

  • Upgrade IOS for Router 1721 & 2651

    Hi,
    I want to upgrade IOS for Router 1721 & 2651, the version is lastest version - 1 (i.e. N-1).
    what's the version and memory need?
    Please kindly put the cisco reference link.
    Thanks a lot!
    Samuel

    Hi
    You need to give more details then just the model no. like the output of "show version" etc.
    Anyway you can view about it at following link.
    http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
    Just to remind that to download the IOS you need to have a Partner/CCIE login.
    Hope that helps
    Pls rate helpful posts.
    Regards
    JD

Maybe you are looking for