Can't upgrade from 10.8 to 10.8.1 on Macbook Pro 17" 2.93 GHz Intel Core 2 Duo
When I try and upgrade on my 2.93 GHz Intel Core 2 Duo 17" from 10.8 to 10.8.1 there is no update in Software Update/App Store.
So I have downloaded the 10.8.1 patch from http://support.apple.com/kb/DL1571 it says that my machine "OSX Update can't be installed on this disk. This volume does not meet the requirments for this update."
I had no problems updating with my iMac to 10.8.
Anyone know if this a problem or is 10.8.1 update for certain models?
Thanks in advance.
If I understand correctly you seem to be getting kernel panics. These can be caused from software and sometimes hardware. You can try the normal list of things. Reset the SMC, PMU, create a another user account and run in that account to see if the problem occurs. Also try repairing permissions from the original disc. you should also look at your battery information to see what the health of the battery is. You can do this via system profiler. I would also run Hardware test from the second install disc that came with your computer. This could help you rule out any hardware problems. Ram can be hard to troubleshoot since it can work fine one minute and not work the next. Also sometimes the hardware test can come up with false problems. I always note the problem and run the test a second time to make sure it was not a false error. If all those things do not fix the problem, I would consider doing a archive and install. This way you could rule out a software problem.
Instead of sending it in I suggest you take it to your local apple store if there is one close to you. They sometimes get repairs done faster.
Message was edited by: mac wise
Similar Messages
-
Will my Macbook 13" late 2006 take the RAM from a Macbook Pro 13" 2.4 Ghz Intel Core Duo?
I have a macbook 13" late 2006 and i found it was cheaper to buy a 13" Macbook Pro 2.4 Ghz Intel Core Duo Ram, I was just wondering if the ram out of the pro model will fit my older model?
Some basic guesses from http://www.everymac.com
MacBook 13" Late 2006 is a MacBook2,1 and that uses PC2-5300 DDR2 667 MHz ram.
MacBook Pro 13" did not use 2.4 GHz but the first of the 13" models was the MacBook Pro7,1 and that uses PC3-8500 DDR3 1066 MHz ram.
Those are not compatible and cannot be used interchangeably. -
How can I access iCloud with my Macbook Pro with 2.16 GHz Intel Core Duo?
I would like to know how to use iCloud on my MacBook Pro as I have other Apple products that are newer than this laptop and I would like to synch with the iCloud between all products. I can synch with the iCloud with my iphone 5 and my iMac.
You must be able to upgrade it to 10.7.2 or later for iCloud:
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s iCloud services; fees and
terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion - System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps.
For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion. -
I have a Mid 2009 15 inch MacBook Pro with 2.53 GHz Intel Core 2 Duo and 4 GB 1067 MHz DDR3. Can this MacBook be upgraded to 8GB? If so, what type would you recomended
Awesome! Thank you What about the Corsair brand?
http://www.amazon.com/Corsair-DDR3-Laptop-Memory-CMSO8GX3M2A1333C9/dp/B002YUF8ZG /ref=cm_cr_pr_product_top -
MacBook Pro
17-inch: 2.16GHz Intel Core Duo running on OS X 10.6.8, can I update to Lion or Mtn Lion? thanks ed cA Core Duo(not Core 2 Duo) can't be upgraded past 10.6.8.
(73883) -
How do I update my macbook pro with 2.33 GHz Intel Core 2 Duo processors from OSX 10.5.8 to 10.7?
Firefox 16.0.2 was the last to work on the old Mac OSX 10.5.x as Firefox 17.0 to current has required OSX 10.6+
https://www.mozilla.org/en-US/firefox/16.0/system-requirements/
https://www.mozilla.org/en-US/firefox/17.0/system-requirements/ -
Can too much RAM memory in a late 2011 model macbook pro lead to kernel panic? That is what I was told by a senior supervisor from apple support who troubleshot this issue.First noticed this problem in Dec 2014 while using a private wifi at a relative's home. Did not occur again until Feb1 using a public wifi at a hotel. Never happened on my private wifi network until last night attempting to use airplay. ( have used airplay before without issue). Late 2011 MacBook Pro running 10.9.5; 2.4 GHz Intel core i7, 16 GB DDR3,AMD Radeon HD 6770m 1024 MB graphic card. The laptop came with 8GB RAM and I installed 8 GB about 2 years ago for some reason I cannot remember... probably because I thought the system was slowing down a little. I know that sounds silly. I do not run multiple programs at a time except I leave 6-8 website tabs open simultaneously. I don't photo or video edit. I would describe my use as "light" based on reading these blogs.I had purchased apple support and spent hours on the phone with them in early Feb moving up through support and senior support to sending logs to the "engineers." Of course lots of things were done some of which I am sorry to report I cannot recall their technical definitions. Deleted 3rd party apps/programs; re-worked start up menu; re-installed operating system; reset " this, that and the other" using acrobatic simultaneous key strokes both in and out of safe mode..Anyway the results from the engineers came back and they suggested that if it happened again I was to remove the 8GB of RAM I had installed as the system was getting confused as to which chip to use.( that is my interpretation of what was said..prob dumbed down for me)...Anyway 1 day after these pronouncements came down I read that Apple had agreed to fix graphics cards in some late model 2011 MBPs. I felt this was unlikely to be the issue given all that had been done including an extended hardware test but called the Senior Support Supervisor I was working with to ask him to make sure. He never phoned me back. Should I go to the trouble of removing 8GB of RAM from my laptop? Of course I will try it as the alternative is a new computer.Blogs read that this model can support 16GB but Apple didn't test for it. Senior Supervisor claims this is my trouble. Does that make sense? Not to me....but it is clear to all my level of knowledge. Can a malfunctioning graphics card be missed by an extended hardware test? I appreciate comments.
The RAM needs specs as shown below.
Maximum Memory
16 GB (Actual) 8 GB (Apple)
Memory Slots
2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM -
Apple MacBook Pro 15" Laptop MA681LL/A Intel Core Duo 2.16GHz 1GB 100GB OSX 10.4
https://discussions.apple.com/thread/2177539
-
Should I upgrade to Snow Leopard/ Lion using a MacBook Pro with 2.26 GHz Inetl Core 2 Duo Processor and 2GB Memory? Can my old macbook take it?
thanksYes. You should be fine with Snow Leopard, but Lion requires a minimum of 2 GBs of RAM. If you upgrade to Lion I would first upgrade your RAM to at least 4 GBs if your model supports it. Also, see:
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
Insert OS X Installer Disc into the optical drive.
Restart the computer.
Immediately after the chime press and hold down the "C" key.
Release the key when the spinning gear below the dark gray Apple logo appears.
Wait for installer to finish loading.
E. If updating:
Download and install update(s)
Use Software Update, or
Download standalone updater(s). -
Have MacBook Pro (ancient) has
2.16 Ghz Intel Core Duo with
1 GB 667 MHz RAM
using OS 10.4.11.
Can I upgrade OS? If so, how far?
And can I add more memory?
I realize this is an old laptop but I need to wait to upgrade to new.if it is the core duo, mac OS X 10.6.8., max ram 2gb.
-
Can I Upgrade my computer to Lion. I have a 2 GHz Intel Core Duo Processor. My computer is 6 years old. Right now I have Snow Leopard.
I have an old iMac about that age that I upgraded to Lion to test my 3rd party applications for compatibility. It upgraded quite simply. Please backup or save all your info/etc to an external CD/DVD/Hard drive, then try to run the installer. The Lion installer will analize your Mac for compatibility before it does anything, and will alert you to it's decisision. My 17" iMac is also 2 GHZ Intel core duo. Surprisingly for many of the things I use it for it works as good as my multi thousand dollar MacPro workstation. Best of luck. But Lion isn't compatible with many third party applications and drivers for printers; scanners; etc.
-
HT5167 I have a Mac 2 GHz Intel Core Duo running OS X 10.6.8. Can I upgrade to 10.7 on this Mac?
I have a Mac 2 GHz Intel Core Duo running OS X 10.6.8. Can I upgrade to 10.7 on this Mac?
no, you need an intel core 2 duo or higher: http://support.apple.com/kb/sp629
-
My MacBook software is 10.6.8 but I can't upgrade to Lion. 1.83 GHz Intel Core Duo with 2GB memory. What to do?
Lion/101.7 System requirements
• x86-64 processor (Macs with an Intel Core 2 Duo, Intel Core i3, Intel Core i5, Intel Core i7, or Xeon processor.)
• At least 2GB of memory, (I say 4GB)
• Latest version of Mac OS X Snow Leopard (10.6.8), with the Mac App Store installed
• At least 4GB of disk space for downloading, (I say 40GB at least)
Like Snow Leopard, Lion does not support PowerPC-based Macs (e.g., Power Macs, PowerBooks, iBooks, iMacs (G3-G5), eMacs).
Lion also does not support 32-bit Intel Core Duo or Core Solo based Macs. Rosetta is no longer available in Lion, which means Lion no longer supports PowerPC applications. -
I have an old imac 1.83 GHz Intel Core Duo, can I upgrade to Mountain X lion?
I have an old imac 1.83 GHz Intel Core Duo, that still runs on OS X 10.4.11, can I upgrade to Mountain X lion? Is my Iphone with Ios6 will work on it?
1. No.
2. Yes. Phone the online Apple Store, order a Mac OS X 10.6 DVD, install it, and run Software Update.
(70502) -
2.16 GHz Intel Core Duo/ 2GB ram upgrade ?
Please could someone tell me if I can upgrade my MacBook Pro 2.16 GHz Intel Core Duo/ 2 GB SDRAM running 10.6.8 to Lion as I need it to run some 2015 software ?
IF I can, what are the dangers I must look for and will my laptop then be even slower than it is now?
Thank you very much,bruf wrote:
Anyway, you think 2011 is the starting point when searching ?
I apologise for my ignorance and thank you again.
You have no reason to apologize. We all have to start from the beginning in every endeavor.
I too am very happy with my 2006 MBP however with the introduction of HDTV, the 2006 MBP was not up to the task. That resulted in the purchase of the 2010 17" MBP because I needed that capability. Technological change does often require newer and better equipment. As I have alluded to, I still use the 2006 with great pleasure.
I have also purchased a late 2011 17" MBP which I feel is a slightly better machine than the 2010. The 2011 has SATA3 internal interface whereas the 2010 has SATA2. What this means is that the 2011 MBP can utilize the full potential of current SSDs whereas the 2010 cannot. Do not misunderstand, an SSD in a 2010 will still be a significant performance enhancement. Also a 2011 MBP will accept up to 16GB RAM (also at 1600 MHz) whereas the 2010 can only utilize 8GB RAM (the 2010 13' model being an exception). The 2011 MBPs also have slightly better GPUs than the 2010.
On the plus side for the 2010 MBP, it is more energy efficient than the 2011. In other words, longer battery run time.
The 2011 MBP has a quadcore CPU which is not the great advance that some may lead you to believe. It shines only when a given application can utilize the parallel processing that it affords. Though not as critical, do opt for the fastest CPU available if there is a choice.
I like the 17" displays in the newer MBPs (late 2008 and newer) due to the 1980 x 1200 resolution. That is compatible with HDTV. The retina display are nice, but not nice enough to warrant my purchase of a 15" model.
Both my 2010 and late 2011 MBPs will run any applications that a newer MBP will, but perhaps not quite as fast. Neither is obsolete, yet.
Ciao.
Maybe you are looking for
-
Hello, I'm seeing an issue that started this past Monday with no recent change to our environment. External Outlook Anywhere users and Mobile users, OWA users are unaffected. Internal Users are affected when using Outlook of any version, 2010 or 201
-
Error removing data from MDS using WLST
I'm new at MDS so i want to remove some data which I inserted in the wrong structure....sounds quite easy. After some looking around I should be able to do this using a deployment plan and WLST. I chose the last one as I am not realy familiar yet wit
-
How to change the value of Valuation class.
dear friends: i want to change the value of Valuation class in the material master .but system warning info occurs . The valuation class cannot be changed Message no. M3 368 Diagnosis You wanted to change the valuation class. However, this is not po
-
Japanese, Question Marks, Locales, Eclipse, and Windows XP ????
Hello. I am having some issues localizing JSP to Japanese. I have read a lot of stuff on the topic. I have my .properties file in unicode with native2ascii, etc. When I debug under Eclipse 3.0, I see the Japanese characters correctly displayed in my
-
I am working for an office in which I am charged with emailing the owner PDF documents that contain daily reports. I need to know if there is a way that I can set adobe so that when he open the attachment it opens at a certain level of zoom. For exam