Can't upload from premiere elements to youtube

I'm trying to upload a 25 minute video to youtube. It says the following: "The video duration exceeds the maximum duration supported by the destination. Please reduce the duration of the video and try again."
youtube supports videos of this size now. How can I get past this? Thanks!

Thanks A.T. So far the default setting are working just fine, but this is good info in case that changes.Jan
From: A.T. Romano <[email protected]>
To: Janice Yuvan <[email protected]>
Sent: Saturday, May 2, 2015 11:30 AM
Subject: can't upload from premiere elements to youtube
can't upload from premiere elements to youtube
created by A.T. Romano in Premiere Elements - View the full discussionjanicey For your workaround, you have been pointed to Publish+Share/Computer/AVCHD with Presets = YouTube Widescreen HD.The default for that preset is 1280 x 720 @ 24 progressive frames per second with a bitrate of 8 Mbps (megabits per second). If you want other than that default setting, you can customize that preset to 1920 x 1080 @ 29.97 or 25 progressive frames as well under the Advanced Button Video tab of the preset. Determine if the bitrate needs adjustment and the file size is acceptable You might also want to explore using Presets = MP4 - H.264 1920 x 1080p30 (or 25 as appropriate) and customize the preset under the Advanced Button/Video Tab of the preset. Watch the file size. If you are OK with the 1280 x 720 for quality and file size, then please disregard the suggestion for this. If you are interested in the suggestion, do not hesitate to ask questions or ask for clarification if needed. ATR If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7505552#7505552 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7505552#7505552 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Premiere Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Similar Messages

Can't import from Premiere Elements 4.0 into CS5.5

Hey guys,
I am trying to open a project that I did a while ago in Premiere Elements 4.0 (Windows) in a new Premiere software (Mac). I tried both Premiere Elements 10 and Premiere CS5.5, and both of them denied my old project, saying it was incompatible. Importing didn't work out either.
Any ideas?
...or is there a place where I can purchase Elements 4.0 for Mac?
Thanks in advance!

You are most welcome, and hope that things work fine.
The porting of PrE and PrPro to Mac, has caused a few issues, as those mentioned above. For some "history," Premiere (precursor to PrPro, not PrElements) WAS X-platform, at least by about Premiere version 5.0 (my archives do not go back to before that version). With Premiere/Premiere Pro 7.0/PrPro 1.0 (really an odd version, with three possible names!!!!), there were ONLY PC versions, so that Premiere 6.5 was the last X-platform version, until PrPro CS 3, when Mac support was added back. This created a "hole" and that has bitten many Mac-users, hence that rec. to Open earlier Projects (the Project file extension also changed, as of PrPro 1.0) in a PC version of CS3 (that first PrPro to go X-platform). THEN, a Mac with PrPro, CS 3, or higher, should be able to handle things.
As PrE did not go to X-platform did not come about, until PrE 9, that leaves a big hole, just like with PrPro before CS 3.
I have also found that newer versions of PrE's Project files (PREL's), will not Open in older versions of PrPro, for example, my PrPro 2.0 (PC only) will not Open PrE 7, 8, 9 or 10 PREL's.
Hoever, my PrPro (PC only) will Open older Premiere Projects from the Mac days, with those same exceptions, listed above. I have worked with many Pr 6.5 Mac Projects in my PrPro 2.0 (PC only), and each worked almost perfectly, with those same exceptions, but even then, PrPro 2.0 is cool, and tells me which Transition, or Effect is not available, and even gives me the name of it, plus the TimeCode, where it's located. In my case, I just replaced a 3rd party, or Mac-only Transition, or Effect, with one in my PC-only PrPro 2.0. Neat eh?
It is convoluted, especially as there were times, when both PrE and PrPro were PC-only. Add in several fairly major changes in the Project files from PrE 2.0 through PrE 4.0, and then the old Premiere to PrPro, and you have a real can-o-worms! And, that does NOT take into considerations changes/additions/deletions of some Transitions, Effects, and things like Instant Movies/Themes.
Now, one possible solution would be to use PrE 4.0 (or later) on a PC, to Export/Share the Timeline to MOV, say with the Animation CODEC (think that is a possibility with QT - might need QT Pro? loaded), and Import that MOV into PrPro on the Mac. If I were doing that, I would edit either very loosely, with no Transitions, so I could edit tightly in PrPro, or edit VERY tightly, knowing that changing things like Transitions would have issues. However, one would need PrE 4.0 (or later) ON a PC. Judging from one of your questions, it appears that the PC with PrE 4.0 is no longer available, so the comment above is probably moot in your case.
Most of all, good luck, and hope that you can find the person, that you need, to help you get things mostly into your PrPro.
Hunt

Adobe Application Manager can't connect from Premiere Elements 11 in Windows 8

Is this a Windows 8 issue or an Adobe issue?

What is the exact error message you are receiving? Can you post a screenshot of the error?

Upgrade from Premiere Elements

Can I upgrade from Premiere Elements to Premiere Pro at some discount?

No, only from earlier versions of Premiere Pro: http://www.adobe.com/products/premiere/buying-guide-upgrades.html
Sorry!

Unable to upload entire video clip to Youtube from Premiere Elements 10, "Share" feature

Hi all,
I just bought Premiere Elements 10 and plan to upload video to Youtube directly from Premiere Elements 10 "Share" feature. However it always uploaded about 10 to 20 seconds of my 2 minutes video only. Then it only uploded about 20 seconds video to Youtobe successfully but not the entire video clip which is about 2 minutes. Is there anyone face the same problem like me? Please help me on this matter. Thanks in advance.
Best regards,
Ellie

John,
The WAB (Work Area Bar) has tripped up many, and is a common issue, when the Timeline output is truncated.
Here is a look at the WAB (from PrE 4.0, but works the same in later versions):
The WAB is a great tool, when one wishes to limit the Export, or perhaps the area of the Timeline that Renders. However, many do not even notice it, and fewer understand how it works, or how to use it, and it gets in their way, if something is not set properly.
To the OP - Good luck,
Hunt

Upload problems with Facebook and Vimeo from Premiere Elements 10

I have created a project in HD and am trying to upload to Vimeo. Premiere Elements 10 does not have a preset so I followed some instructions from the Vimeo website. Project is "blurry" when viewed. I checked with Vimeo and they said what they converted matches what I sent so the problem must be in the export - bit rate may be incorrect. Can anyone give me the correct presets for Vimeo from Premiere Elements 10. I can view other people's video in HD and they look fine so I don't think it's my computer monitor. I'm sure you will need more information about my project so please give me a list of specific things you need to know. Thank you.
My Facebook problem is as follows. If I use the preset from Premiere Elements 10 to upload to Facebook it looks fine, HD quality as expected. Problem is, I would like to upload to my business page. Since the personal page and the business page (managed by my personal account) share a login, the preset always loads to my personal page. Does anyone know the values of the preset so I can upload the video to my business page. My business is event and wedding videography so I would like the posts to be as clear as possible.
If the problem with the Vimeo uploads is solved then I suppose I can just share the Vimeo file on Facebook. Thank you.

VDRAVES
I think that you are overlooking what you already have with regard to a Vimeo HD preset for export to file for upload of the saved file at the Vimeo website.
Please see
Share/Computer/AVCHD with Presets = Vimeo HD
Under the Advanced Button/Video Tab, you can customize the preset further from 1280 x 720 to 1920 x 1080 and increase the bitrate, if necessary, to a level that does not give you a prohibitive file size. With Profile = Main and Level = 3.1, the bitrate range is 0.19 to 14 Mbps (megabits per second).
I would start with the default bitrates of Target = 8 Mbps and Maximium = 9 Mbps and explore and experiment from there.
If you customize the preset to 1920 x 1080 in the Export Settings customization area, then change the Profile to High and the Level to 5.1
When you do that the bitrate range will be 0.19 to 300 Mbps instead of 0.19 to 14 Mbps.
In all cases, watch for file size versus bitrate versus quality of end product.
Please give that a look and then let us know if the above resolves your Vimeo and Facebook question.
Please review and let us know the outcome.
Thank you.
ATR

How can I move my Premiere elements 8 from my old pc to my new imac?

How can I move my Premiere elements 8 from my old pc to my new imac?

tenfootprints
Does your imac come with a Windows Mac interface?
If not, you cannot. There is no Premiere Elements 8 Mac version. And, you cannot install Premiere Elements 8 Windows on
a Mac computer. As I recall, Premiere Elements 9.0/9.0.1 was the first Premiere Elements version to be offered in Windows and Mac versions.
Please explain with more details.
Thanks.
ATR

Can't open adobe premiere element 11 on my MacBook Pro? which I buy it from App Store? plz help

can't open adobe premiere element 11 on my MacBook Pro? which I buy it from App Store? plz help
its says that its currently not availabe
I have so many work counting on this programme plz help

Thank you for your replay
It was working on my Mac before installing the new update of Mac software. then its corrupted
from where I can ask for refund? as I bought from App Store ?
regards

How can I export a completed project from Premiere Elements?

There are a number of formats you can export from Premiere Elements. All are available under the Share tab and the major output formats are available under the Personal Computer option.
To export your completed video for use in another project, use the DV-AVI output option.
To export your video for display on the internet, use the WMV or MOV output options.

I experienced the same problem as mreingrover. The Share features of iMovie appear to be completely unimplemented.
I had had MacKeeper installed for a short while on my previous Mac; never on my new MacBook Pro. I could not find any trace of it in Application Support, Launch Daemons, or LaunchAgents, in either my user Library or the root Library. But I figured maybe there was some trace somewhere that had been copied over from the old system, so I deleted iMovie and went to reinstall it from the App Store.
Now the App Store wants $14.95 for an app that has never worked right, and which is (I think) supposed to be free with my new MacBook Pro Retina.

How can I upgrade from Photoshop Elements 12 to Photoshop Elements 13 AND Photoshop Premiere Elements 13? What would be the price?

How can I upgrade from Photoshop Elements 12 to Photoshop Elements 13 AND Photoshop Premiere Elements 13? What would be the price?

Hi Raymond,
I would advise you to buy the bundle package of Premiere and Photoshop Elements 13 which cost 149 $ but due to online promotions the price right now is 119 $.
Thank you for posting on Adobe Forums.

Can I import a menu from Premiere elements 7(the Popcorn menu) into Encore CS4?

Can I import a menu from Premiere elements 7(the Popcorn menu) into Encore CS4?
If so how do I accomplish this act?
Are their additional menus available for Encore CS4?

The Menus in PrE are in Menu Sets. Each set is a Main Menu and a Scene Selection Menu. As PrE does the authoring semi-automatically, there are many "extras" in those PSD's, in the Button Layer Sets. All you have to do is make a Copy of your two Menus into a separate folder, so that you do not worry about messing up your Menu Sets in PrE. I'd do this in a new sub-folder in the Encore Library folder hierarchy. Then, Open each of these two Menus in PS. Go in and clean out all of the other languages for the Text and Button Text. Match the Layer Set/Button Layer Set names to those naming conventions in the Encore Library Menus, as you will not be getting any semi-automation. Where you do not need, say a Next Button, just eliminate that Button's Layer Set. Remember, PrE will do this semi-automatically, plus will give you the number of Scene Selection Menus, that your Project calls for - Encore will not. You must count the Scenes, divide by the number of Buttons on that Scene Selection Menu, and do Copies of that Menu, to accommodate what you require.
As for Encore, it comes with a full compliment of Menus, Buttons, and other Assets, like EM files (Templates), with Motion and Audio Assets. All can be completely customized in PS. Note: in PSElements, I do not believe that you can create Layer Sets, so that will be a limitation. The full PS has no limitations, with the single exception that to change Button Sub-picture Highlight colors, this must be done in Encore's Menu Editor, unless it's been added to PS CS5.
Good luck,
Hunt
PS - remember, work on Copies of the two Menus in the PrE Menu Set, and NOT on the originals, or you will be doing a Repair Install to get those back.

Can i transfer a project from premiere elements 13 to premiere elements 12?

i am working on a project in a free trial of premiere elements 13. i am going to buy premiere eements 12. will i be able to open my project from premiere elements 13 in premiere elements 12?

mefe
It has been the case that you cannot open a Premiere Elements project file (.prel) created in a later version in an earlier version.
And, you cannot open a Premiere Elements Windows project file in Premiere Elements Mac and vice versa.
ATR

How do I publish a video in flash from Premiere Elements 13?

I've created a video I wish to publish on my website using flash, as I have with previous videos. However, I no longer see flash as a choice unto itself. If I choose "Flash Video for YouTube," the warning pops up that "The video duration exceeds the maximum duration supported by the destination." It's not actually for YouTube, but I don't see any obvious was to create flash output other than for YouTube.
In previous versions, flash output was an option with no (practical limit) on the output size.
Is there some option/choice I'm missing?
Thanks!

ABC_Digital
No flash video export and no workaround that I have ever seen for this Premiere Elements 13 situation.
Premiere Elements 13 no longer offers the Publish+Share/Computer/Adobe Flash Video as last seen in version 12/12.1. It is what it is. No workarounds
that I have seen. Even the webDVD feature has been removed from Premiere Elements 13.
Other considerations in what you wrote
a. Premiere Elements' built in feature has its file size and duration limits (for 13/13.1) 2.2 GB and 15 minutes. YouTube extended time accounts do not
work in the Premiere Elements built in feature.
b. Use of the YouTube preset "flash video for YouTube" uploads the Timeline content to YouTube where YouTube does the file conversion to flash format
for display there. Any copies of your own uploads to YouTube have been available, but as .mp4 and not FLV or F4V.
That is what I have been able to put together with regard to the questions that you presented.
Any questions, please do not hesitate to ask.
Thank you.
ATR

Android Razor~Premiere Elements 11~Youtube

I have the Andriod Razor (Filmed in HD+1080p) and the video and audio looks great in Adobe premiere elements11 and on my camera, but when I convert it to either Adobe Flash or Quick time to upload on to Youtube or Facebook from Adobe Premiere elements 11 I have problems....
Both the audio and video on Adobe Flash becomes irregular and at time unaudiable and when converting to Quiktime the video losses it's sharpness and clarity.
My quest is to find the the best program, procedure and all of the compatible presettings to use for going from the Android Razor to Adobe Premiere elements to Youtube or Facebook?

First, go to the Edit menu and make sure the Project Settings for your Premiere Elements project match your video specs (1080p).
Then use Publish & Share/Computer/AVCHD with the YouTube HD preset to output yoru video. Should give you excellent results on YouTube and Facebook.

From Premiere Elements 4 to CS3

I am considering moving from Premiere Elements 4.0 to CS3 (on Windows Vista 32 bit). I have a couple of questions regarding the two, I'm hoping someone here may know.
1) Can CS3 read Premiere Element 4.0 projects (windows versions).
2) Is CS3 more responsive and less prone to crashing than Elements 4.0 with HD projects? While Premiere elements 4.0 renders quite quickly compared to elements 3, it seems quite a bit less stable and is more "swappy". If you load a 5-10 min HD project, it takes quite a while, and if you minimize it to go to your email or something, then go back to it, it takes quite a long time before it brings the window back up and is responsive. This really makes for a frustrating workflow. I've tried all the performance tips, changing registry entries etc, reinstalling nothing helps. It's just slow. I have a quad core Intel QX6700 processor, latest drivers for everything, 4GB of system RAM, and an NVidia 8800GTX video card, so the system is pretty fast. I'm hoping CS3 would perform better on the same system.

1) Yes but beware that media used in an Elements project must be CS3 compatible - or it will simply show as offline / unsupported when you open the elements project in CS3
2. Hmm.. My system is of lesser spec than yours but I dont have that problem. OK Premiere takes a while to load and open a project but if I then minimize it do some email (or whatever) and go back to PP - it is virtually instant - certainly less than a second. Maybe someone else here can suggest the cause

Can't upload from premiere elements to youtube

Similar Messages

Maybe you are looking for