Can't use a starter template

I'm on a Mac - Mavericks. I have uninstalled and re-installed Dreamweaver 2014, most current.
I tried the starter templates a few weeks ago, hit cancel when asked to save the CSS and didn't think much about it. I assume it was actually working just fine that first time. 
Now I can't use a starter template at all. When I try, I click create and get an error message:
You must specify the external style sheet that contains the CSS for this layer.
OK... but it won't let me!
I figured I messed something up with my first cancel so I uninstalled, made sure to uninstall preferences, re-installed and did not sync from the cloud to get a nice new clean install. Still won't work.

I went to Starter Templates - Responsive Starters - About Page, clicked create, then I clicked cancel instead of saving a css file. It canceled the whole thing, but was all working fine.
I came back later and none of the responsive templates will work for me now. I can choose any of them and I get the error message with no option to create or point to any css, it just errors out.
As I mentioned before, I uninstalled everything, including preferences and re-installed, not syncing with my CC to get a clean install but I still get the error.

Similar Messages

  • Can you use a start up disc on an iMac without formatting the hard drive?

    Can you use a start up disc on an iMac without formatting the hard drive?

    Yes, because the startup disk is read from the boot rom, not the Hard Disk.

  • PrintShop 7:  can I use other label templates?

    Greetings.
    PS 7 alreday has a number of Avery Label templates builtin.
    Can I add/use more than those included?
    They are available from Avery online.
    Thanks for your time!

    Hi, Bruce. Why not just give it a try? If you can find where the included templates are stored, and the ones you download have the same file format, put them in the same place and see what happens. You can always remove them if it doesn't work out.
    If the included templates are actually built into the PS 7 application, see whether it offers any provision for importing others.
    If all else fails, read the manual, or contact tech support for PS 7 and ask someone who can answer the question without guessing.

  • Can I use Premiere Elements templates for Encore CS6

    LIke the title says.... can I use menu templates from Premiere Elements for Encore CS6? If so, does it matter what version of PRE?
    I've seen some templates on the web (e.g. muvipix) but don't know if I could use them in Encore.
    I saw somebody asked a similar question for CS4, didn't know what, if anything, had changed...
    ETA: Just FYI, I downloaded the Encore CS6 Functional Content and installed it, but honestly I'm not sure if it added any templates or what.... :)

    Also, I have to say, for stuff on that's so valuable, Adobe has made the page very hard to find and made the instructions as clear as mud.
    First, I'm still not clear on what the difference is between "Functional Content" and "Resource Central Library Content".
    Second, as far as I can tell, I never had the problem being addressed by the page (i.e. "When you access the Library panel in Adobe Encore, the panel contains no content."). My library panel always had content, just not a lot of it.
    My problem would more accurately be described as "When you access the Library panel in Adobe Encore, the panel contains surprisingly little content.". So the mother lode of content I was looking for was buried as an "Additional Solution" for a problem I didn't have.
    And lastly, the Functional Content is some oddly double-zipped self-extracting affair, and the "Resource Central Content is a more straight-forward compressed file, but unlike the Functional Content, it's a .7z file so you have to download a 7-zip compatible decompression tool.
    It's awesome that Adobe has that content, so I hate to complain, but it's not so awesome how hard it is find and install.

  • Can I use Jolt start/stop Tuxedo apps ??

    Hi,
    I am a newbie to Jolt....we need a way to stop/start Tuxedo
    application with Java...can we use the Jolt API ??
    Thankx a million
    Aidan
    Munich, Germany

    There is a mode that mix both start and stop trigger but it doesn't explain if i can re-use easily these 2 triggers one after the other.
    user manual 653xcard  part 2-9:
    "When you use a start and stop trigger, data transfer starts upon receiving a trigger on the start trigger line (ACK/STARTTRIG pin) and ends upon
    receiving a trigger on the stop trigger line (STOPTRIG pin), and ..."
    thanks awaiting your insight answers.
    Hari

  • I can't use my Report Template !!!

    Hi friends,
    I built my Report Template and saved it as Inatel.tdf, after this I created a report using the Inatel.tdf template and the Report Builder generated this code :
    <rw:style id="Inatel">
    <link rel="StyleSheet" type="text/css" href="css/-B">
    </rw:style>
    In the second line : href="css/-B"> -B ????
    Is it a bug?
    If not, what am I missing to do?
    I think that I need to create the css file, but how can I create it?
    Is there some document about this? Where it is?

    Artur,
    tdf files are only usable with paper based reports, not web based as you seem to be attempting.
    Take a look at rwTemplates.xml (under orawin\reports\templates) and follow the examples there to create a web template (which you can then add to cauprefs.ora so that they show in the builder).
    For a web template you will need:
    a) An HTML file to act as the basis of the generated jsp.
    b) A css file that maps the class set used in the template to some styles (see examples in orawin\reports\docroot\css). Note that this css file will need to be available to the page after it's generated.
    There is a paper planned on this that's currently being written and will be published on OTN once complete.
    Regards,
    Danny

  • Can I use the start up discs for my Powerbook to install 10.4 on my iMac?

    Hi, I just bought a used Powerbook G4 1.67GHz and wanted to use the start-up discs with OS 10.4.2 that came with the Powerbook on my older iMac G4 800MHz. What I really want to do is wipe the hard drive clean on my older iMac and then reinstall OS 10.4.2 and associated programs from the discs that came with the Powerbook. Will this work? I do not want to wipe everything off of the older iMac and then realize that these discs will not work on the older machine. There are two discs that say PowerBook G4 15-inch and 17-inch Mac OS X Install Discs version 10.4.2 AHT version 2.5.2 Disc version 1.0

    Hello fish:
    Short answer, NO
    Software distributed with systems is hardware-specific.
    Barry

  • Which ports on a macbook pro can be used for start-up disks?

    I'm looking to buy a mac book pro, I'd like to know which ports can be used as an external startup disk, and how would tthe boot speed compare?
    Firewire would seem as if it should boot twice as fast as an external usb2, but can firewire be used as a startup? Can Thunderbolt be used as a startup disk? I havent seen any devices with that interface, but that doesnt mean there cant be, or aren't curently...Any help? Thanks in advance
    Jim

    Just edited the question to reflect what I meant I thought I recalled creating a bootable SD card for my 13" MBP but couldn't be sure. I've tried so many different things and I'm terrible at documenting what I've done. After nearly 20 years in the tech biz you'd think I'd have learned.

  • Can't use "Save as template"

    Hello, I am quite new to DW
    I use Traditional Chinese v8.02 of Dreamweaver
    But, I can't Save as template!
    Every time I click "Save as template", it calls me to define
    a site first
    However, my dreamweaver MUST HANG whenever I try to add a new
    site or define a site
    I tried the older version of DW (the DW MX 2004)
    the same problem occur
    please help.

    I have made screenshots with descriptions on my problems
    <case1>
    case1_pic1:Before I click Create New Dreamweaver Site
    http://simon.pennilesshosting.com/case1_1.JPG
    case1_pic2:After the click, It hangs (no response)
    http://simon.pennilesshosting.com/case1_2.JPG
    <case2>
    case2_pic1:After I click "file" --> "save as template", a
    dialog box appears and I click "Manage Sites"
    http://simon.pennilesshosting.com/case2_1.JPG
    case2_pic2:After I click "Manage Sites", then i click "new"
    then click "site
    http://simon.pennilesshosting.com/case2_2.JPG
    case2_pic3:It hangs again (no response)
    http://simon.pennilesshosting.com/case2_3.JPG
    <case3>
    case3_pic1:I click "Site"-->"Manage sites"
    http://simon.pennilesshosting.com/case3_1.JPG
    case3_pic1:The same dialog box appears and it hangs again
    after I click "new"-->site
    http://simon.pennilesshosting.com/case3_2.JPG

  • CAN YOU USE A FLASH TEMPLATE IN IWEB?

    I have recently created my website using iWeb....albeit with much help from this forum...and am very pleased with the results.
    I would like to, however, have my site open with a Flash introduction. I have seen many affordable Flash Templates for sale on the web and am wondering it any of these would successfully work with iWeb. If so:
    1. What specs would I need to look for?
    2. Does anyone know of a site that sells iWeb compatible Flash intros?
    Thanks for all of your answers to my previous posts and hopefully this one as well.

    Sandie,
    Yes I have used Keynote as an intro and I once used it in swf format. I ended up liking the QT better.
    Here is the intro:
    http://web.mac.com/abenningfield/iWeb/CameraObscura/Camera%20Obscura%20Intro.htm l
    As an example...here is another I created in Keynote:
    http://web.mac.com/abenningfield/iWeb/ArchivalGenealogyVault/Archival%20Genealog y%20Vault%20Intro.html
    But as far as Adobe Flash goes.....I don't have the pro version (I have Basic) and I got a fully functional demo for 30days. Yeah it did cost about 400 bucks after the 30 day trial. Yikes.
    On the right side of this page is a third party flash file that I bought for a dollar. I used the free demo of Flash and put it on my site. After you format the flash file you want.....you don't need to keep Flash unless you want it (I did).
    http://web.mac.com/abenningfield/iWeb/CameraObscura/Links.html
    But Keynote is great...and yes Kirk is right....wait for the new version.
    Also here is another app that converts video to swf:
    http://www.verticalmoon.com/products/video2swf/video2swf.htm

  • How can I use an older template on the latest version of Pages?

    Hi,
    I just got my first Mac laptop/computer, a Macbook Pro. One of the things I wanted to use my Mac for was to create a newspaper. This newspaper has a template
    like this: galleio.png
    I am wondering if there is any way to get this on the newest version of Pages?
    Thank you in advance

    So what format is it in now?
    If it is in Pages '09, be prepared to to lose features and formatting by converting it to Pages 5 format.
    Do you have Pages '09? If so why not continue to use it, there is nothing to be gained by downgrading to Pages 5.
    Peter

  • Can i use Web Start for applet servlet architecture

    Hello ,
    I am currently working on conversion of swings GUI to applet based so that it can be accessed any where from the network.
    Presently its a standalone application, requiring installation of the work station component on user's machine .This would access the database on other server using the JDBC ODBC drivers.The GUI would display the information from the database.
    The task is to make it accesible remotely using a webbrowser.I have thought of the following.
    1.
    Applet-->Servlet--->Database architecture
    I was wondering if i can do the same functionality with Webstart. I mean will i be able to deploy the present application and make connections to the host server.
    Please compare the options .

    No , this is not supported by Oracle.
    Regards Anders Northeved

  • How can i use net start for iws

    Dear all :
    Is there any body know how to restart one of the instance by
    command prompt ???
    Many Thanks !!
    Thomas

    Hi,
    Yes, you can user net start in Windows NT/2000 followed by the
    service name. The service name can be found by checking the properties
    of the service entry in the settings->control panel->Administrative
    Tools ->Services. Hope this helps.
    eg C:\>net start https-admin-serv
    Regards
    Raj
    Thomas wrote:
    Dear all :
    Is there any body know how to restart one of the instance by
    command prompt ???
    Many Thanks !!
    Thomas

  • No flexibility to use diff RFX templates during the RFQ-- RFx integration?

    Hi,
      I know for a fact that we can only use one RFx template during the RFQ --> RFx process integration. This RFx template is tied to the Integration Configuration Document.
    Current customer has different Group functions such as Nuclear, Corp etc. Document security templates on RFx events need to be set such that an RFx created by a user in Nuclear Group function should not be visible to users in Corp.
    This can be realised using Document security templates defined by Doc Type. But the issue is that RFQ's created in ECC can only use this one RFx Template associated to a specific type.
    Are there any plans in future releases to make this more flexible and not tie all the RFQ's to a single RFx template?
    Due to this restriction additional scripts need to be written to ensure code of conduct in the Sourcing app.
    Thanks
    Rach

    Hi Rachith,
    Great to catch you back in the forum
    Just fyi, choice of templates during RFQ replication is supported starting in Wave 9, which is yet to be releassed.  Configuration requirments to do this will be available with Wave 9 documentation.
    In releases prior to Wave 9, adding a template node in the xml might not be of help, unless some code downport happens.
    Thanks,
    Baski

  • How to get Bursting file to use the same template as selected by user

    I have created an XML publisher bursting control file for a standard Oracle report Direct Debit letter.
    The user wants to be able to select from a number of different letter templates which is ok except that the bursting control file is fixed to use one template.
    How can I get the bursting control file to use the same letter template as selected by the user when running the report ?
    I am using XML Publisher 5.6.3 with bursting patch.

    Try these following, which come to my mind now as of now.
    In the bursting file, you can do the filtering and apply different template..
    <xapi:template type="rtf" location="/usr/template1" filter=".//DIRECT_DEBIT[./parameter_or_element='first_template']"></xapi:template>
    <xapi:template type="rtf" location="/usr/template2" filter=".//DIRECT_DEBIT[./parameter_or_element='second_template']"></xapi:template>
    second option..
    you can replace the element from the xml in the bursting control file.
    ${ELEMENT_NAME}
    can be used in the template name i guess..
    <xapi:template type="rtf" locale=""
    location="xdo://AR.${SHORT_NAME}.en.US/?getSource=true" translation="" filter="">
    </xapi:template>
    But in this short name has to be in XML file...
    I haven;t tried it...wil try it wheni get time..

Maybe you are looking for