Can't use brushes after re-install -Could not load the brushes because the file is not compatible wi

I have CS3 Web Premium on an Alienware Area 51 M12j 7700i laptop.
Recently I had to wipe the HD and reinstall the OS, and everything else.
Photoshop deactivated, installed and re-activated fine, but when I try to use any brushes(except the default ones), I get:
"Could not load the brushes because the file is not compatible with this version of Photoshop"
This is weird as they worked just fine before I had to redo everything...
Anyone know what's the cause?

corrupted.. maybe... but if you read the post, they worked fine until the rebuild...
And it's not "a" file, it's "many, many" files, maybe 40 or so brush files.

Similar Messages

Safari application-disappeared. & can't be found after download/install ...

This morning, Safari application was no longer in the Applications Folder on my iMac. (Nor was FireFox!) Can't find it anywhere, even using 'Search'.
So, I installed Safari from a previously downloaded .dmg/.pkg. Went through all the steps, and greeted with "Installation was successful!!!"
However, the [supposedly] newly installed Safari application is nowhere to be found.
I have been through various cycles of this, even downloading anew on MacBook and then dragging from MacBook to iMac. I have been careful to use the correct versions to match the Mac OS 10.6.2 that's on the iMac.
I'm befuddled. Can't find a similar problem on the forum ...

HI,
*I have been careful to use the correct versions to match the Mac OS 10.6.2 that's on the iMac.*
Absolutely.
First, instead of using a .dmg Safari from a previously downloaded .dmg/.pkg... that might be a previous version of Safari, Go here and try downloading the newest version of Safari.
http://www.apple.com/safari/download/
Make sure and select Snow Leopard on the left. If after the installation, you still can't use Safari
after you download and install Safari....
When you have probems with applications disappearing, it's probably a good time to check the startup disk for errors.
Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
*(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)*
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. *Make sure there is always 10% to 15% free disk space*
If the startup disk appears to be ok and there sufficient disk space, try booting in Safe Mode
What is Safe Mode
Carolyn
Message was edited by: Carolyn Samit

Can't see videos after I installed Adobe Flash Player 13.

Can't see videos after I installed Adobe Flash Player 13.
When I choose a video to play there is always: "Plug-in failure.
I use Mavericks on OS X 10.9
I unistalled Ad. Flash Player and reinstalled it but nothing got better
L.

See:ATTENTION MAC CUSTOMERS - Flash Player 13 "Plugin Failure" Workaround

I can't find iSync after lion install

I can't find iSync after lion install. I try too sync with my N8 Nokia. The program iSync dont appear in program mapp.

It's Apple's software not yours and as shown by it's exclusion on the OS X Lion pages is not part of the new OS. Upgrading to Lion is optional.
It's a trivial matter to copy it back from your Snow Leopard backup, but using it under Lion is not supported at all and WILL stop working sooner or later.
Why would it be sensible for Apple to include software in their new OS that they know will stop working?

Can't use slim after recent upgrade

Hi all,
Just did pacman -Syu and now I can't use slim to login anymore. I searched the forum but I didn't see any other complaints with X and upgrades, lately.
This is the end of my pacman.log
[2010-08-26 08:33] synchronizing package lists
[2010-08-26 08:34] starting full system upgrade
[2010-08-26 08:34] upgraded bison (2.4.2-1 -> 2.4.3-1)
[2010-08-26 08:34] upgraded evince (2.30.3-1 -> 2.30.3-2)
[2010-08-26 08:34] upgraded glproto (1.4.11-2 -> 1.4.12-1)
[2010-08-26 08:34] upgraded kbproto (1.0.4-1 -> 1.0.5-1)
[2010-08-26 08:34] upgraded libfetch (2.32-1 -> 2.33-1)
[2010-08-26 08:34] upgraded libxau (1.0.5-1 -> 1.0.6-1)
[2010-08-26 08:34] upgraded libxcb (1.6-1 -> 1.7-1)
[2010-08-26 08:34] upgraded libx11 (1.3.4-1 -> 1.3.5-1)
[2010-08-26 08:34] upgraded libxi (1.3-2 -> 1.3.2-1)
[2010-08-26 08:34] upgraded mlocate (0.22.4-1 -> 0.22.4-2)
[2010-08-26 08:34] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
[2010-08-26 08:34] upgraded pacman-mirrorlist (20100808-1 -> 20100825-1)
[2010-08-26 08:34] upgraded renderproto (0.11-1 -> 0.11.1-1)
[2010-08-26 08:34] upgraded sqlite3 (3.7.0.1-1 -> 3.7.1-1)
[2010-08-26 08:35] upgraded tzdata (2010k-1 -> 2010l-1)
[2010-08-26 08:35] upgraded videoproto (2.3.0-1 -> 2.3.1-1)
[2010-08-26 08:35] upgraded xorg-server-utils (7.5-4 -> 7.5-6)
[2010-08-26 08:35] upgraded xorg-utils (7.6-2 -> 7.6-3)
[2010-08-26 08:35] upgraded xterm (259-1 -> 261-1)
Because of the xorg pkg. upgrades, I first thought X problems with my nvidia card but I found if I don't use slim, I can startx from console with no problem. I found if I changed to a different tty, killed x, etc. I could login and startx but the session would only last a couple of minutes and x would die. Seemed to do this even if I stopped slim with /etc/rc.d/slim stop but I was messing around with so many things that I can't be sure I actually stopped slim. As long as I didn't start it, everything seems to be fine.
The slim log isn't much help--it just mentions unable to connect to xserver, so for slim, it seems the upgrade to xorg-utils or xorg-server-utils is a problem.
Personally, I prefer to use no login manager anyway but this is on the main home computer and the wife likes to see a nice login screen (she doesn't like changes to the computer setup much).
Last edited by bgc1954 (2010-08-26 17:37:32)

Hello!
I'm experiencing the same problem: since I updated my system with 'pacman -Syu' slim no longer works on my laptop. More precisely, in place of the usual login screen of slim I get a black screen without prompt, but I still can use Ctrl-Alt-F1 to login in on tty. I tried to start slim from rc.conf or from inittab, no difference.
This problem does not seem to be related to Xorg and my (trident) video driver, as I believed first: replacing slim by lxdm without changing anything else solved the problem completely. Nevertheless I was very fond of the simplicity of slim and I would prefer to use it again if possible, but I have absolutely no idea of what is going on.
@Iceman81: I followed your link without understanding how to use the information there.
@bgc1954: Did you eventually solve your problem?
@Everybody: Could anyone give me a hint? I'm an ordinary Arch user, not a "master of Kyudo".
Regards,
LuX.

How can I use aperture after receiving the full adobe suite? It won't allow me to use it.

How can I use aperture after receiving the full adobe suite? It won't allow me to use it. I receive a dialogue box which states previews are not allowed in aperture and the application is shut down.

Aperture is Apples version of Lightroom. This has nothing to do with Adobe. Ask on a Apple forum. You won't find many people here using this program.
Mylenium

Can i use this download and install on multiple computers?

Can i use this download and install on multiple computers?

I assume you're talking about the Lion installer? If so, yes, you're allowed to use it on any machines authorized with your Apple ID (which I believe means a maximum of five machines). This is, of course, meant for family use... I'm not sure about business use, but I'd suspect you need one copy per machine at a business. If you're in that situation, you may want to wait for the $69 Lion flash drive Apple will be releasing next month sometime, as that won't be tied to an Apple ID. But check with Apple to be sure on that.

HT5639 Can I use Boot Camp to install Linux on my MacBook Pro?

Can I use Boot Camp to install Linux on my MacBook Pro?

Welcome to the Apple Support Communities
Boot Camp wasn't designed to install Linux. Apart from that, the Boot Camp version included in OS X Mountain Lion will ask you to insert a Windows 7 or Windows 8 DVD in order to run Boot Camp, as far as I know.
Apple doesn't support Linux on Macs, but it works properly on Macs. There are a lot of how-to's in the Internet about the steps to install Linux and the different possibilities you have. Also, what distribution do you want to install on the computer? You should also consider the option to install Linux on a virtual machine

I downloaded itunes but when i try to install i get an error saying "There is a problem with this windows installer package. a programe required for this install could not be run" can anyone help?

I downloaded itunes but when i try to install i get an error saying "There is a problem with the windows install. A programe needed to install could not be open"
can anyone help?

Ok, Below is what worked for me somewhat.
Okay ... try downloading and saving a copy of the iTunesSetup.exe to your PC from the Apple website:
http://www.apple.com/itunes/download/
Now download a trial version of WinRAR:
http://www.rarlab.com/download.php
Open the iTunesSetup.exe with WinRAR, and try to run the standalone install of Apple Application Support from the AppleApplicationSupport.msi you find in there.
It works now BUT there are still problems. It is not allowing or recognizing my Cd/DVD player and i CANT burn. Looking still for this fix.

Can I use my original aperature install disc to install on my new computer? not using old one any longer.

How can I use my original aperature install disc to install application on my new computer? I am not using my old computer and don't want to have to repurchase this application.

You are allowed to do this. Are you asking how to do it? Just put it in the DVD drive and install like you did the first time. You'll need the serial number included with the DVD's.
regards

My IPOD is already synced to iTunes. My friend just acquired an iPhone and he wants to purchase an app through my iTunes. Can he use my iTunes to install the app to his iPhone without screwing up my IPOD information already on my iTunes?

My IPOD is already synced to iTunes. My friend just acquired an iPhone and he wants to purchase an app through my iTunes. Can he use my iTunes to install the app to his iPhone without screwing up my IPOD information already on my iTunes? Also, how does he install ONLY that app on his iPhone without syncing my music also? I haven't done this before with just an app. Thanks.

Since you and your friend aren't married or in the same household (I assume you wouldn't have referred to this person as "my friend" otherwise), what you want to do is not permitted by the terms of use of the iTunes Store.
Your friend should create his own Apple ID. He can use your computer; just have him log into your computer with a user account you create just for him, not your own user account. Doing it that way is almost like having your friend use a different computer, since both Mac OS X and recent versions of Windows do a pretty good job of segregating the data of multiple user accounts.
He can then purchase the app using iTunes and sync it to his iPhone. When he's done, he should log out of your computer.
However, be aware that there is no reason to purchase an app using iTunes on a computer and to then sync it to the iPhone. Your friend can use the App Store app that's installed on the iPhone by default in order to download and install any app he likes from the iTunes App Store.

Why can't I install apps after I installed IOS 5? The app sits there waiting..

Why can't I install apps after I installed IOS 5? The app sits there waiting..

This too started to happen to me when I upgraded iOS 5 and moved to iCloud.
I have since purchased 3 apps and got the waiting que and nothing.
I noticed though that with my Mac on, I went to IPad settings/general/iTunes sync and sync now, suddenly the three apps started o download and install. Why it's doing this I'm not sure until I dig a bit deeper.

I've Lightroom3 on my laptop and desktop PCs. Can I use same productkey to install on my new MacPro?

I've Lightroom3 on my laptop and desktop PCs. Can I use same productkey to install on my new MacPro?

Hal P Anderson wrote:
F. McLion is correct. Note also that you're expected to have LR on a maximum of two machines, on which you can have only one copy at a time running.
Hal
There is one exception to that rule ... If you purchase Lr4 from the Mac App Store ... you can have it installed on up to 5 computers that you own and regeistered to your Apple ID as per the MAS EULA ...

Hi i am getting an error like this while installing Live Cycle Server " The file merge_modules\lc11_common_iam_zip does not exist This file is required sucessfullly run the Live Cycle Installer.Can any one help me on resolving this issue it would be of g

Hi i am getting an error like this while installing Live Cycle Server " The file merge_modules\lc11_common_iam_zip does not exist This file is required sucessfullly run the Live Cycle Installer.Can any one help me on resolving this issue it would be of great help..thanks .

I think in your situation it would be worth trying the things listed under the event. It does have to do with FRS and it's easy to do. I've used it to fix journal errors after a server unexpectedly restarts and sysvol stops replicating. I
could see where it could fix your issue, and if it doesn't, you're out 5 minutes. :)
The listed registry key does not exist
Expand HKEY_LOCAL_MACHINE.
Click down the key path:
"System\CurrentControlSet\Services\NtFrs\Parameters"
Double click on the value name
"Enable Journal Wrap Automatic Restore"

After Effects error: Could not launch Adobe Analysis Server (515) ( 25 :: 101) *POSSIBLE FIX*

Hi. Im New to the forums so sorry in advance if i do something incorrect
Since my Purchase of Adobe CS6, I was not able to use dynamic link, or the plugins that required you to connect to the Adobe Analysis Server (3d Tracker, Warp Stablizer ETC) It would always give me the error
After Effects error: Could not launch Adobe Analysis Server (515)
( 25 :: 101)
Or if i would use dynamiclink
The Importer created a generic error
Through hours and hours searching through the internet, and trying possible fixes, i found possible fixes that might help people with this error.
*Before attempting any of these fixes, make sure you reinstall CS6 Using the Adobe Cleaner*
This guide is for Windows OS Only.
If the error still presists, try these options
-If your windows account is not a administrator, Run Adobe After Affects CS6 As Administrator
-Disable your Anti-Virus and your Firewall
I know you have probably heard this over and over again, but this is mainly the cause of the problem. Some Anti-Viruses even when disabled, go into some sort of one eyed open mode, where it still monitors your computer ever so slightly, so you may want to uninstall the anti-virus. As for the firewall,
1) Go to your start menu search "Check Firewall Status"
2)Then to the left of the window, click Turn Windows Firewall on or off
3)Then tick "Turn of Windows Firewall" on BOTH Home or work network and Public Network.
-Close and Uninstall filtering and spyware programs such as Netnanny and Premiere Opinion. This might be using the TCP Ports that is needed for After effects, dynamic link and adobe analysis server to communicate
-Start up Adobe Analysis server Manually. This can be done by going to C:\Program Files\Adobe\Adobe After Effects CS6\Support Files and running Adobe Analysis server.exe as Adminisrator, Then starting Premiere, After effects, etc.
-If the Adobe Cleaner didnt already, Clean your registry. This can be done with free applications such as CCleaner.
If none of those options work, I would suggest a full format and reinstall of windows.
I hope this would help people with this issue.

captain_astronaut wrote:
I'm running the latest version. Just installed yesterday.
You can download and install the latest version (and older versions) of versions 11, 12, and 13 from Adobe right now. That is why I was asking for the exact version number with decimals. Just the other day, someone said they were running the latest version and they weren't aware that CC was even a thing. They were running version 11.0.3 (which isn't even the latest version of CS6 - it's 11.0.4). That's why I always ask.
captain_astronaut wrote:
I'm on a Mac so I don't have anti-malware, or other security software running.
That doesn't seem like a good idea. While there can't be anything technically referred to as a "virus" on the Mac OS (due to the underlying structure), there can be (and are) malware variants out there that do attack machines running the Mac OS. As Apple products have grown in popularity, developers have been creating more and more malware aimed at OSX.
I certainly hope you at least have your firewall running.
captain_astronaut wrote:
I tried launching Premiere yesterday and it crashed.
This points to a much more serious underlying problem. Thousands (if not millions) of people are running Premiere and After Effects on Macs. What sort of error messages did you receive when it crashed?
Try installing version 12 of AE and the previous version of Premiere as well and see if they run.

Can't use brushes after re-install -Could not load the brushes because the file is not compatible wi

Similar Messages

Maybe you are looking for