Can't use certain keys in Global Address Search

When trying to run a Global Address Search that starts with a letter that's on the numeric keypad (E, R, T, D, etc.) I cannot get it to search by the letter.  E.g., if I press "D" it searches for "4".  Pressing the Option (aka Orange) key doesn't toggle it to alpha mode.  I can search using letters that aren't on the numeric keypad just fine.  And if I my search starts with a letter that's not on the numeric keypad (e.g. "L") I can choose either "D" or "4" as the next letter, e.g., if I press "D" I see "4".  If I then press "L" the 4 changes do a "d" and the search shows "dl".  But if I erase the "l" the "d" switches back to "4". 
Bottom line: I can't choose "D" as the first character in my search.  I have to launch Contacts, then search.  I'm on WebOS 1.4.
Robert

Hello.
It really doesn't work that way. When you type "D", the phone shows a "4", but it searchs for "D". There is no way to distinguish when you want to make a call by number from when you want to search, so the phone gives you both options.
Try to enter a "Dave Martin" contact in your phone and search him by pressing "DL", "DA" or "MA".
Regards.

Similar Messages

  • How Can i Use two Different Public IP Addresses no my DMZ with ASA Firewall.

    How To Using Two Different Public IP Address on My DMZ with ASA 5520
    Postado por jorge decimo decimo em 28/Jan/2013 5:51:28
    Hi everyone out there.
    can any one please help me regarding this situation that im looking for a solution
    My old range of public ip address are finished, i mean (the 41.x.x.0 range)
    So now i still need to have in my DMZ another two servers that will bring some new services.
    Remember that those two server, will need to be accessable both from inside and from outside users (Internet users) as well.
    So as i said, my old range of public ip address is finished and we asked the ISP to gives some additional public
    ip address to address the need of the two new servers on DMZ. and the ISP gave us the range of 197.216.1.24/29
    So my quation is, on reall time world (on the equipment) how can i Use two different public ip address on the same DMZ
    on Cisco ASA 5520 v8??
    How my configuration should look like?
    I was told about implementing static nat with Sub Interfaces on both Router and ASA interface
    Can someone please do give me a help with a practical config sample please. i can as well be reached at [email protected]
    attached is my network diagram for a better understanding
    I thank every body in advance
    Jorge

    Hi,
    So looking at your picture you have the original public IP address range configured on the OUTSIDE and its used for NAT for different servers behind the ASA firewall.
    Now you have gotten a new public IP address range from the ISP and want to get it into use.
    How do you want to use this IP address range? You want to configure the public IP addresses directly on the servers or NAT them at the ASA and have private IP addresses on the actual servers (like it seems to be for the current server)?
    To get the routing working naturally the only thing needed between your Router and Firewall would be to have a static route for the new public network range pointing towards your ASA OUTSIDE IP address. The routing between your Router and the ISP core could either be handled with Static Routing or Dynamic Routing.
    So you dont really need to change the interface configuration between the Router and ASA at all. You just need a Static route pointing the new public IP address towards the ASA outside IP address.
    Now when the routing is handled between the ISP - ISP/Your Router - Your Firewall, you can then consider how to use those IP addresses.
    Do you want to use the public IP addresses DIRECTLY on the HOSTS behind the firewall?This would require you to either configure a new physical interface with the new public IP address range OR create a new subinterface with the new public IP addresses range AND then configure the LAN devices correspondingly to the chosen method on the firewall
    Do you want to use the public IP addresses DIRECLTY on the ASA OUTSIDE as NAT IP addresses?This would require for you to only start configuring Static NAT for the new servers between the inside/dmz and outside interface of the ASA. The format would be no different from the previous NAT configuration other than for the different IP addresses ofcourse
    Of the above ways
    The first way is good because the actual hosts will have the public IP addresses. Therefore you wont run into problems with DNS when the LAN users are trying to access the server.
    The second way is the one requiring the least amount of configurations/changes on the ASA. In this case though you might run into problem with DNS (to which I refer above) as the server actually has a private IP address but the public DNS might reply to the LAN hosts with a public IP address and therefore connections from LAN could fail. This is because LAN users cant connect to the servers OUTSIDE NAT IP address (unless you NAT the server to public IP address towards LAN also)
    Hopefully the above was helpfull. Naturally ask more specific questions and I'll answer them. Hopefully I didnt miss something. But please ask more
    I'm currently at Cisco Live! 2013 London so in the "worst case" I might be able to answer on the weekend at earliest.
    - Jouni

  • How can you use the same e-mail address for multiple ipads?

    I have two iPads.. an iPad and an ipad 2.  I registared my new ipad 2 and now my old ipad is will not let me log on and is telling me that my e-mail address is already in use.  how can you use the same e-mail address for multiple ipads?

    And by using the same Apple ID you can also share purchases.  If you have a different Apple ID for each iPhone then you can't share purchases.

  • Can I use my existing E-mail address to retrieve my password reset through security questions

    Can I use my existing E-mail address to retrieve my password reset through security questions instead of through E-mail. When I try retrieving my new Apple password through reset through security questions?  On the Apple id, it will not allow me to do so becasue I forgot my security answers to the question. I'm naming one or two of the wrong vechiles which is what the questions ask me for for security questions.
    For icloud do you reccommend that I keep that same E-mail address or create a new one for my iCloud mail aside from my G-mail address name?
    I asked support community for the very first time to reset my security questions and it wanted me to create a new user name for iCloud when I already have *****l for my original Apple id.
    <Email Edited By Host>

    TheresaEW,
    I’d recommend contacting Apple directly to resolve your security question issue.

  • Can you use more than one email address on one account as to enable two or three devices to use imsg????

    Can you use more than one email address on one account as to enable two or three devices to use imsg as when i add new email address's in settings it just says veriyfying and nothing happens????

    If I read your question right, yes.
    My pad has two e mail addresses, and my phone has a phone number as well as a e mail address.  For each device you can add additional 'receive at' addresses in settings.
    Note, when you add a new address, apple will send an e mail to that new address that you need to respond to, to show that it is a valid address.  So look in the inbox of that e mail account for the verification e mail.  Note further, some spam filters think that the verification e mail might be spam, so if it does not show up in your in box, look in any spam file you might have.
    in my case, the verification e mail came within a few minutes of declaring the new address.
    The multiple address are useful if you have more than one device under your apple id, and want to be able to send stuff to that particular device.

  • Can we use more than one DNS address

    Can I use more than one DNS address in the settings of my mini iPad.  One for local and other for other country.  If so, how can I enter them in DNS column?  Thanks!

    Can I use more than one DNS address in the settings of my mini iPad.  One for local and other for other country.  If so, how can I enter them in DNS column?  Thanks!

  • Why can someone use same icloud e-mail address as mine?

    Why can someone use same icloud e-mail address as mine?
    I Have found that the new facebook account has been set up in someone's name using my iclound e-mail.

    Do a backup.
    Try System Preferences/iCloud and sign out. Then sign in with your new Apple ID.

  • I have my mac pro with the keyboard in spanish and i didn't knew that it was going to be a big problem because i can't use the key pads the way they are printed, how can i use them the way they r printed?

    i have my mac pro with the keyboard in spanish and i didn't knew that it was going to be a big problem because i can't use the key pads the way they are printed, how can i use them the way they are printed?

    why can't you use the keyboard the way it is printed?

  • Can i use the key figure total delivery time in days in rows and how is can

    Dear all,
              Can i use the key figure total delivery time in days in rows and how is can.but all the key figures r used in rows but i cannot use in column.i want bothin rows and in column  at a time ,can this is possible,and how.

    Hi,
      yes you can.You will have to use structure in the row.
    Right click on the row and create a new structure.
    In this structure you can add key figure.
    Maximum number of structure a query can have is two
    Please assign points if it helped you.
    Regards,
    Senoy

  • My configuration audio "output" is only numerique and I would like listen to audio by integrated loudspeaker. I can't use the keys "sound on my computer. If I click on I have a icon "forbiden".  Can you help me

    my configuration audio "output" is only numerique and I would like listen to audio by integrated loudspeaker. I can't use the keys "sound on my computer. If I click on I have a icon "forbiden".  Can you help me

    Si vous tappez sûr le cle <<option>> et cliquez vôtre souris de l'icon de haut-parleur
    de le haut partie de sa Desktop, vous pouvez voir les choix pour le son: les haut-parleurs internales, Line out et Digital Out. C'est tout ! Ou cliquez de la Pomme a gauche, choissisez Préferences, et Son, et voila..... le meme chose.....
    Merci d'avoir choisi Apple
    John B

  • Can I use my MacBook to type in search options in Apple TV?

    can I use my MacBook to type in search options in Apple TV?
    ie. can the Mac be 'paired' with Apple TV so I can use the keyboard?

    No, but an Apple Bluetooth keyboard can or you can use Remote app on iPhone/iPod Touch/iPad.
    AC

  • I'm exhausted of trying to find a solution to a problem created by Apple. I have moved to iCloud, following your instructions and now I can not use my mobileme e-mail address. How can I contact directly with Apple, not just an automatic reply phone number

    I'm exhausted of trying to find a solution to a problem created by Apple. I have moved to icloud following all your instructions and now I can not use my mobile me e-mail address. I can not activate icloud because when I put my e-mail address it answers that somebody is already using my address. I have my old e-mails, but I can not receive any e-mail or send them.
    I have contacted Apple Technical Support in Spain and I was sent an e-mail saying that I have to call a phone number and when I call it is always an answering machine who answers that says that I have to pay 50€ for a consultation or wait for 10 minutes. When I have made the consultation it was never mentioned that I have to pay 50€ for a phone consultation. If I don't want to wait I have to pay for the Apple Tecnical Support which cost 250 €, this was not mentioned in the technical support page.
    Can somebody let me know how can I contact Apple in another way in order to talk with a human being or chat directly? I was very happy just using my mobileme e-mails, I didn't need any clouds and I was force by Apple to registered if I want to continue using my mobileme e-mail address.

    Sandra,
    See this Apple support document for information on reporting an issue with your iTunes purchase.
    http://support.apple.com/kb/HT1933
    B-rock

  • Can't use down key because it opens automator. Does any one know how to disable this short cut?

    Everytime I press down on down key it opens automator. It doesn't let me delete the app. I don't know what to do, it is very frustating to fill in a chart when I can't use the down key. Does any one know how to disable this short cut?

    Are you talking about the Down Arrow key? To my knowledge there is no way to use that key as a shortcut for anything. But look in the Keyboard section of System Preferences and the Keyboard shortcut tab.

  • How can I use my old MobileMe email address if I did not migrate to icloud by the deadline?

    I had a mobile me account that I did not migrate to icloud.  Now when I try and set up an icloud account using the old mobileme email address, it says that address is already in use. I then try and access it but the password doesn't work and it says mobileme is closed. When I try and reset the password, it says an email has been sent to the email on file...which is an old mobileme address that I cannot access.
    How can I get this email address set up in icloud? 

    Nice idea - I tried it but it doesn't seem to work (at least not for me).
    So here are the details in case, you can spot something more I could do....
    When MobileMe was live
    MobileMe ID was [email protected]
    AppleID (to make iTunes purchases) was [email protected]
    When iCloud went live (and MM was still alive)
    iCloud account was created based upon AppleID - [email protected]
    iCloud would not create [email protected] as was already in use (by me)
    iCloud would not merge [email protected] as iCloud does not merge
    MobileMe migration to iCloud option was not taken
    Deleted all data out of MobileMe account (mail, calendar, contacts, gallery)
    Deleted MobileMe mail account off of all devices
    When MM died
    I received notification that I had not migrated my MM account
    iCloud was happily working as Contacts/Calendar sharer using my AppleID of [email protected]
    Weeks later on Mac running 10.8
    System Preference - iCloud, already logged in with AppleID of [email protected]
    Then ticked the untick Mail box
    Long wait with small grey whirling cog box, stating "Loading". Eventually a BLANK message box with OK which then disappeared on a timeout.
    System Preference - Mail...  Re-added [email protected] (now picked up as iCloud account)
    Mail - Accounts.... Re-added [email protected] BUT got message "Mail can'y connect to the account..."
    So tried logging into www.icloud.com (using AppleID of [email protected] where my contacts/calendar now reside).  Clicked on Mail icon and received "@me.com Address Needed" message

  • Installed itunes 10.5 and now can't use function keys on my keyboard

    I just downloaded iTunes 10.5.0.142 and I now can't use the function keys on my keyboards to change track, pause etc. Is anyone else having this problem? Also, why is it now ctrl+shift+m to switch to mini player? Ctrl+m doesn't do anything now

    Yeah I agree the white keyboard was clunky, I dont really miss it. The problem is you can't just use the new lighter keyboards with the white imacs bc the operating system is outdated. The apple store told me I needed to upgrade my operating system and it would cost me 170 dollars, which I found incredulous.
    I dont think its due to an app running or an expose issue, thanks for your responses.
    aghhhh maybe ill have to buy an old crusty one on ebay. why the heck would apple not make a compatible keyboard for their 3 year old computer anymore, WHYYYYYY???!!!

Maybe you are looking for

  • Crystal reports converting varchar 254 to memo data type

    Hi All, We are still using Seagate Crystal Reports 7.5 for some of our reporting. I have a problem that hopefully someone can help with. One of our connections is to ODBC- AR System ODBC Data Source. In that data source there are fields defined as va

  • Lightbox with multiple images attached to one thumbnail?

    Is it possible to have one thumbnail allow you to scroll through multiple images without having to click on another thumbnail?  For example,  lets say that I have three projects with 10 images per project.  I only want to have three thumbnails which

  • Customer Retrun Scenario with out billing (Invoicing)

    Hi Expert, We have customer return scenario in quality, As per SAP standard practice inthis senario sales order created, sales order delivery with pgi and billing happen for this order and material sent to customer. If any defect arises at customer e

  • What is the Exit / Badi triggered after PGI is done in VL02N???/

    What is the Exit / Badi triggered after PGI is done in VL02N??/ Once PGI is done then i have to update some tables. so whats is the userexit or a bapi that is triggered ones the PGI is done.?????????????

  • IWeb site vanished! (Lion)

    Hi I used Finder to find my Domain and then dragged the Domain icon onto my Desktop. Now I can't find my site anywhere! It was the only site I had on iWeb so now when I open iWeb, it just opens the template menu, as if my site never existed. What the