Can't use Extensions

Hi, I am a new DW user, using DW MX 2004, I know what the
extensions are supposed to do, I have a site coded, but for some
reason, I can't find how to add the particular extension that I
have downloaded, to my page. I read through the user guide, but I
can't figure it out. BTW, I am using Mac OSX 10.5.
Thanks a lot

Eli Halperin wrote:
> Hi, I am a new DW user, using DW MX 2004, I know what
the extensions are
> supposed to do, I have a site coded, but for some
reason, I can't find how to
> add the particular extension that I have downloaded, to
my page. I read through
> the user guide, but I can't figure it out. BTW, I am
using Mac OSX 10.5.
What user guide? For the extension or for Dreamweaver?
One thing to try is to open Extension Manager and select the
extension you installed, in the bottom pane you should see some
text that should include how to access the extension within
Dreamweaver. Beyond that, you'll need to tell folks what specific
extension you're trying to use.
Danilo Celic
| Extending Knowledge Daily :
http://CommunityMX.com/
| Adobe Community Expert

Similar Messages

  • Can I use extension cord of macbook air and connect it to iPad charger

    Can I use extension cord of macbook air and connect it to iPad charger?

    If you mean slide off the nubby plug and use the long cord instead? Then yes.

  • Can I use two Time Capsules? one as an extension of my laptop (for music and video storage) and the other one to back up everything from the laptop and  Time Capsule (for music and videos)

    Can I use two Time Capsules? one as an extension of my laptop (for music and video storage) and the other one to back up everything from the laptop and  Time Capsule (for music and videos)

    Not via Time Machine.   It cannot back up from a network location.
    The 3rd-party apps CarbonCopyCloner and ChronoSync may be workable alternatives.
    EDIT:  And, if you're going to do that, you could back up from the Time Capsule to a USB drive connected to the TC's USB port.  Second TC not required.
    Message was edited by: Pondini

  • How to connect with VPN of type L2TP programatically in IOS8 ? canse NEtwoatically in IOS8 ? can i use NEtwork/Extension framework for this?rk/Extension framework for this?

    I have a mobileconfig file and the VPNType is L2TP . How can i connect to this VPN programatically in IOS8 ?Apple's Network/Extension framework has methods which supports IPSEC and IKEV2 protocols(NEVPNProtocolIPSec, NEVPNProtocolIKEv2). Can i use Network/Extension framework to connect with L2TP type VPN ?

    I have a mobileconfig file and the VPNType is L2TP . How can i connect to this VPN programatically in IOS8 ?Apple's Network/Extension framework has methods which supports IPSEC and IKEV2 protocols(NEVPNProtocolIPSec, NEVPNProtocolIKEv2). Can i use Network/Extension framework to connect with L2TP type VPN ?

  • Need to know of a method / process that can be used to send the same msg to all those appearing in my email listings with the same extension after the "@" sign in their address(es) on my macbook [e.g., with "@gov.ca"; Snow Leopard].

    Need to know of a method / process that can be used to send the same msg to all those appearing in my email listings with the same extension after the "@" sign in their address(es) on my macbook [Snow Leopard].

    If you simply want to send the exact same message to everyone in your address book with emails ending in "@whatever.com", you can do the following:
    Create an email with subject, message and attachments but no addresses
    Open Address Book, All Contacts
    Search in Address Book for @whatever.com
    Select the results and drag them into the To: or Bcc: field of the email. If Bcc: then put your email address in the To: field.
    Send the email
    This will not personalize the emails (such as with "Dear firstname:" at the top of the message) but it will let you send an idential message to everyone who meets your criteria.

  • I want my kids to have the ir own iTunes accounts so they can manage their download on individually.  I have a rather extensive music library (not purchased from Apple, but ripped from CD's).  Can I use my iTunes libray to put music on their devices?

    I want my kids to have their own iTunes accounts so they can manage their download on individually.  I have a rather extensive music library (ripped from CD).  Can I use my iTunes library to put music on their devices if the apple id's are different?

    the iTunes app on the iPad is updated when the iOS is updated. What version of iOS is on your iPad?
    The message you are getting is about updating iTunes is for your computer, not the iPad. The current version of iTunes is version 11.
    Download here http://support.apple.com/kb/DL1614
     Cheers, Tom
    Message was edited by: Texas Mac Man

  • I can't use flashget 3 extension

    When I try to download something using flashget 3 extension nothing happen, it worked fine with Firefox 3 but not the new beta.
    Thx for the help in advance.
    Best Regards,
    Samer.

    You may have to wait for the makers of Flashget 3 to update their extension to work with Firefox 4. There have been changes made during Firefox 4 development that will require some extensions to be updated to work with Firefox 4.
    One thing you could try is the [https://addons.mozilla.org/en-US/firefox/addon/220/ FlashGot] extension. That one works with the Firefox 4 betas and it can be used to integrate third-party download managers with Firefox. The [http://flashgot.net/ FlashGot home page] shows that it can be used to integrate FlashGet with Firefox.

  • Can I use a 10 ft USB extension for my HP printer?

    Can I use a 10 ft USB extension for my HP printer?

    USB 1.1/2.0 specifies a maximum cable length of 5 meters (~16 feet) - http://photo.stackexchange.com/questions/8679/whats-the-maximum-length-of-usb-ca ble-that-you-can-use-for-tethering

  • Safari won't start after showing an error message: Safari can't use the extension "Omnibar" because the extension is no longer valid.

    Since yesterday evening (19-01-2015) safari won't start. After clicking the safari application it shows an error message: Safari can't use the extension "Omnibar" because the extension is no longer valid.
    This message almost directly disappears whereupon the Problem Report opens. I've tried to find a solution on the web but without succes.
    I'm running OS X Yosemite version 10.10.1 and Safari version 8.0.2 on a:
    MacBook Pro (Retina 13-inch, Mid 2014)
    Processor 3 GHz Intel Core i7
    Memory 16 GB 1600 MHz DDR3
    Graphics Intel Iris 1536 MB
    Since I updated to Yosemite I've been having multiple problems. I already read a clean install will solve most of them. But till then I would love safari to work again.
    Thanks!

    There is no need to download anything to solve this problem.
    If Safari crashes on launch and you don't have another web browser, you should be able to launch Safari by starting up in safe mode.
    You may have installed the "Genieo" or "InstallMac" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
    Back up all data before making any changes.
    Besides the files listed in the linked support article, you may also need to remove this file in the same way:
    ~/Library/LaunchAgents/com.genieo.completer.ltvbit.plist
    If there are other items with a name that includes "Genieo" or "genieo" alongside any of those you find, remove them as well.
    One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those.
    After removing the malware, remember to reset your home page in all the web browsers affected, if it was changed.
    If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
    Make sure you don't repeat the mistake that led you to install the malware. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
    In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere  should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
    Still in System Preferences, open the App Store or Software Update pane and check the box marked
              Install system data files and security updates (OS X 10.10 or later)
    or
              Download updates automatically (OS X 10.9 or earlier)
    if it's not already checked.

  • Can i use a usb extension

    as the title really my mains socket is not right beside my bed and normal ipone lead will not reach can i use a usb extension ??or is it not recomended?

    Tamara wrote:
    You will be fine using a USB extension.
    Hi Tamara
    I have a question. Is it possible that a standard USB extension cable purchased from ... anywheremart connected to the iPhone dock could cause a kernel panic attack?
    To be honest, I hope that is what caused 2 such attacks today. I purchased one of the new Magic Mouses and since my MacPro doesn't have bluetooth I purchased the rocketFish Micro Bluetooth adapter from Best Buy to enable Bluetooth for the mouse. I used it yesterday with not problems, everything was fine. Today, I decided I wanted to move my iPhone dock further away from my computer and well, as we all know that cable is not very long. So, I used an old USB extension cable I found in the closet left over from my PC days.
    After running everything with that cable for several hours today, I got a panic attack (well the computer first, then me). The only thing I figured it could be was either the rockfish bluetooth adapter or the usb extension cable. Since a friend has had the rockfish connected to his MacPro for a few days now without any problems, I'm hoping my problem is the cable.
    Any thoughts? One other observation. The keyboard extension cable that comes with the MacPro is specially keyed to prevent you from connecting it to the iPhone usb cable, so I'm thinking that maybe any cable that is connected to the iPhone or iPhone doc is specialized.
    Thanks
    Ron

  • How can i use jpg extension with forms 10g and webutil

    I have a form with webutil and i want to open imege jpg extension but thier are Bmp but my
    image jpg and image item has no jpg extension .
    How can i use jpg extension with forms 10g and webutil ?

    You can use the JFIF image format for jpg files.

  • What application can you use to open a file with the .acc extension?

    What application can you use to open a file with the .acc extension?

    http://www.fileinfo.com/extension/acc

  • Can you push install an extension without using Extension Manager?

    I'm looking for a way to deploy a CS5 extension en mass using an unattended network push install utility (i.e. LanDesk). I have not been able to find any documentation yet on how to do this and our corporate customers do not want to send someone to every desktop to install or upgrade extensions manually using Extension Manager (in some cases they can have over 1000 end users spread across the country). Please help me locate some documentation on how to do this.
    Thanks,
    Dwane Ferry

    Extension Manager supports updatable extension. If your existing extension specifies update URL in its mxi file, when the new version of the extension is available, you can put the update information file to the URL. Extension Manager will detect the extension update during launch and notify users. After user clicks the "Update" button, the updated extension will be downloaded and installed.
    Extension Manager also supports command line interface. You can put the extension to a shared loacation, and write a batch file using commands. Send the batch file to all customers to run.
    More detailed information about updatable extension can be found in http://www.adobe.com/go/em_file_format .
    About command line interface, please see http://help.adobe.com/en_US/extensionmanager/cs/using/WSB4845EDD-14E5-476a-B749-FF328830D1 4F.html .

  • Some iOS Native extensions that can be useful

    Hi,
    I have made some iOS Native extensions that can be useful.
    You can find it at https://github.com/xperiments?tab=repositories
    ANE7z
    => Adobe AIR iOS Native Extension to decompres 7z files.
    ANEZipFile
    => Adobe AIR iOS Native Extension to zip/unzip files.
    ANEFileSyncInterface
    => A micro http server with FileManagement capabilities Native Extension
    IOSSystemUtils
    => Adobe Air IOS Native Extension to control Brightness / Torch / Badge
    ANEUnRar
    => Adobe Air Native Extension to Obj-C UnRar Lib
    Please give me your comments

    First of all, thank you for creating this extension. However, it doesn't seem to work. Below is my code for decompressing ByteArray (error handling is stripped for simplicity):
                        public function decompress(aData:ByteArray):ByteArray {
                                  // Save data to file
                                  var fileInput:File = File.applicationStorageDirectory.resolvePath("input.7z");
                                  var stream:FileStream = new FileStream();
                                  stream.open(fileInput, FileMode.WRITE);
                                  stream.writeBytes(aData);
                                  stream.close();
                                  var folderOutput:File = File.applicationStorageDirectory.resolvePath("output");
                                  ANE7z.decompress(fileInput, folderOutput);
                                  var files:Array = folderOutput.getDirectoryListing();
                                  for each (var fileOutput:File in files) {
                                            trace("Extracted file: " + fileOutput.nativePath);
                                            if (!fileOutput.isDirectory) {
                                                      var bytes:ByteArray = new ByteArray();
                                                      stream = new FileStream();
                                                      stream.open(fileOutput, FileMode.READ);
                                                      stream.readBytes(bytes);
                                                      stream.close();
                                                      bytes.position = 0;
                                                      return bytes;
                                  return null;
    The problem is folderOutput.getDirectoryListing() always returns an empty array.

  • I have a Bose Soundlink. Can I use the speaker on the Soundlink as an extension of my i-phone during calls?

    I have a Bose Soundlink. Can I use the speaker on the Soundlink as an extension of my i-phone during calls?

    just tried it on mine but no doesn't appear to
    odd logically I thought it might

Maybe you are looking for

  • How can I graph muliple sets of y-values against a single set of x-values?

    Hi.  I am trying to write a VI that will take columns of data stored in a 2D array and plot it with the first column being the x-coordinates and all subsequent columns (different parameters) of data being y-coordinates.  The number of these parameter

  • How to resolve "BPE_ADAPTER SYSTEM_FAILURE_INTERNAL" error in moni.

    I am getting 3 files from legacy systemi am merging 3 files using BPM sending APO system using proxy., When i am testing in dev it was worked fine after transporting it QA i an getting below error and in sxi_cache its shoing integration process retur

  • Storage bin 916 0085192173 is currently blocked

    Dear All I Save VT02 (shipment), I have error message "Storage bin 916 0085192173 is currently blocked" Please help me thanks imron Edited by: Muhammad Nur Imron on Sep 30, 2010 5:34 AM

  • Rewire track problem

    I've got Logic Pro 7.3, and I've never had to create a rewire track before. Now that I've tried, I'm simply met with the message "No more tracks available". This is not different when I create a new project or start up an old one. Has anyone met this

  • Increase Shared Pool for erorr # ORA-04031

    hi, what do i need to look at before i increase the shared pool of our database? there is just the one database instance on the machine. i am concerned about the repurcussions on the server. i hope the information below is of help. db version: 10.2.0