Can't use Filevault 2 with Wireless Keyboard and Mouse

Am I the only one who can't get File Vault 2 to work with a wireless keyboard and mouse? It seems that the "Recovery Partition" of Lion which you have to log into in order to enable File Vault 2 doesn't support BlueTooth devices so it's impossible to log in and start the encryption process. And after using a USB keyboard to do the encryption, I now can't log onto the encrypted disk for the same reason.
I can't believe that nobody else has noticed this, so what am I doing wrong?
Thanks

I have exactly the same problem; I have an original Apple Wireless keyboard (the older, full-size white and clear plastic keyboard), and a Logitech MX-Revolution mouse, both work just fine using the recovery partition, but don't respond at all for the FileVault login prompt.
The mouse just doesn't do anything, and if others are getting USB devices to work then my mouse should work since it has its own wireless receiver, masquerading as a USB device, but it's just frozen in place. Meanwhile my keyboard appears to connect normally, but the login screen is completely unresponsive, pressing caps-lock doesn't cause the caps-lock button to light up, even though I know the keyboard works just fine.
Considering the push for more wireless by default it seems odd that this problem exists, especially when my devices all work perfectly fine for selecting start-up disk, starting up from CD and so-on. Does anyone have a more concrete fix for this? FileVault 2 was one of the features I was really looking forward to but I can't even properly enable it, I'm just fortunate that Lion at least stops the process if you don't log-in successfully the first time.
As a side note; is the same pre-boot login required if you enable FileVault encryption on a non start-up volume? If not, at what point does the volume become available? I'm hoping to separate my OS and user folders onto my SSD and regular HDs respectively, but if I enable FileVault for my HDs only, will I still need the pre-boot login?

Similar Messages

Initial set up with wireless keyboard and mouse!!

My gods, I set up a mac mini with wireless keyboard and mouse. It stead fastly refused to find the brand new apple wireless mouse. I had to plug a wacom in, in the end to get anywhere. Then it would not find the keyboard, again apple wireless. It did find the keyboard but when it started the pairing just came up with no keyboards were found.
I struggled in the end and after around 10 minutes blagged the keyboard, I don't know how it just suddenly worked.
Thinking about this I had the self same problem on a wireless keyboard and mouse for an iMac as well I installed for a friend, it took ages and ages for the computer to discover the two apple devices.
Am I just unlucky or is there voodoo involved? Luckily I am a seasoned apple user so got there in the end, but if I were a switcher and the very first experience of my new mac was it could not find its own mouse, I would not be impressed.

I've been using the Apple wireless mouse and keyboard with my Mac mini for about a year.
I've noticed that whenever the batteries for the two devices are running very low, they may not be recognize by the mini. Other than that, they are fine.

Linksys Wireless Router Conflicting with Wireless Keyboard and Mouse?

I am getting ready to purchase a Linksys Wireless-N Router with a PCI Wireless-N Adapter (2). Will I have a conflit with my Microsoft wireless keyboard and mouse? I have two home computers that I want to set up with a wireless router. Should I use a Linksys Wireless-N Home Router or a Linksys Wireless-N Broadband Router? Which Wireless-N PCI Adapters should I use?

No you should not have a problem with the router conflicting with the wireless keyboard/mouse. They are on a different frequency all together from the wireless router.
Richard Aichner (Ikester)

I have 2 iMacs in my home, both with wireless keyboards and mouses.

I have a problem where one mouse/keyboard will connect to the other and vise versa. is there any way to lock the keyboard and mouse on one computer?

Try renaming one of the keyboards. If that doesn't work then you need to set up separate passcodes for each one. You do this in the BT preferences.

IMac with Wireless Keyboard and Mouse question

My mouse doesn't do anything when I right click. It is a standard wireless mouse, how can I get it to right click?

The Apple Wireless Mouse doesn't have a right click button. To access the right click menu, hold down the Control key, and click the mouse wherever necessary.

Apple Wireless Keyboard and Mouse + Bootcamp = screensaver problems

I can't seem to get the screensaver to activate when using the apple wireless keyboard and mouse under windows XP with Bootcamp.
I know its a problem with the wireless devices because if i restart the computer and not press anything (ie. mouse or keyboard) then the screensaver will work.
However as soon as I press the mouse or move the cursor around, the screensaver will fail to activate on its own, or if it activates, it will wake itself up even if I don't move the mouse or press the keyboard.
Any solutions?

Hi Capfred: Thank you for your replay. I have tried to follow your information but unable to solve the problem. I followed your comments but I am unable to get to the menu you mention. I have installed MAC OS X, Version 10.7.2 .
The only thing that works is the Apple last wireless mouse. I belive that I must have done something that created this situation. My problem is that I live in Panama, Central America and the local Apple dealer has little to no tech support.
Would it be possible for me to call you and review the config of these items or is there a way to restore the Macbook Air to the original installation .
I appreciate your kind help and once again thank you for your help. Regards,
Ruben
[email protected]

Can the iPad work with a wireless keyboard and mouse?

Would like to know if the new iPad will work with a wireless keyboard and mouse!

There are quite a few threads requesting this facility, so I thought I would choose this recently active (at the time of writing) post to reply to, in the hope some thinking appleite with influence stumbles upon it.
I totally get Apples philosophy of not polluting their interface design concepts with the introduction of a clunky so-last-year cursor; I actually agree. What I can't understand so much is that there are a number of apps that could benefit from mouse support. The one I need is RDP. This class of apps allow us to connect to servers running other operating systems using the IPad; why not authorise CERTAIN APPS to access the Bluetooth mouse stack, and let us have joy. It doesn't affect the iPad experience in the slightest, at least not to it's detriment.
The new retina screen is such that I actually prefer the experience of using my iPad to connect to the server than my laptop!, but given I develop software, there is no way my stubby finger can compete the clinical accuracy of a mouse when using intricate interfaces such as MSDE. With just that one addition, I would practically move into the post pc era you tout so much, at least in my interfacing With the post pc pc,s :).
Thanks
Paul

Can I use apple modem with ge keyboard and mouse?

can I use apple modem with ge keyboard and mouse?

Which Apple Modem is it exactly?
And why would/how could the Modem affect the Mouse or KB as you see it?

TS2662 Wireless keyboard and mouse were working fine until today; installed new batteries in both when they wouldn't work-says they are connected intermittently, but can't use either one-have tried to re-pair and nothing happens-codes not recognized-

i have been using my wireless keyboard and mouse with no probs until today-installed updates this morning-since I restarted have been unable to use either device-have tried everything Apple suggests to do- re-pairing unsuccessfully; turned everything off and back on-sometimes the Bluetooth says it is connected, othertimes not-but even when it says it is connected the keyboard/mouse don't work; put in new batteries-no go also; bluetooth icon is on. Anyone have any ideas????

Troubleshooting wireless mouse and keyboard issues
http://support.apple.com/kb/TS3048

I have just replaced my mac mini because previous motherboard was damaged. I want to pair with my existing wireless keyboard and mouse but can only pair with thebold mac mini which will not start. Any ideas?

See title. How do I unpair a wireless keyboard and mouse when the previous paired mac mini is damaged and will not start?

You should be able to go to System Preferences -> Keyboard and System Preferences -> Mouse and discover the bluetooth devices.
Also, do you have a bluetooth icon on the top bar of your mac? Should look sort of like this:
If you can figure out which device is which (by trial and error, if nothing else), you can connect to them on this menu.

What's going on with my wireless keyboard and mouse power status?

My iMac (Nov. 2009) came with the wireless keyboard and mouse. When the original batteries wore out, I started using rechargeable batteries and that has worked fine. This is Energizer recharger, not Apple's. I've used and recharged them for well over a year now. When my batteries are freshly recharged, my iMac tells me I have something like 75% charge.
Earlier this week I'm being told that the batteries have 100% charge. They've never been 100% charged, even when they were new. I haven't charged the batteries for several weeks either when suddenly I supposedly have 100% charge.
What's going on?

This is a change that occurred with the 10.6.7 update. Everyone suddenly has 100% charge when other tools report less. Either it's a bug or they adjusted the scale by which it's measured. Some users report that the percentage starts to decrease after the battery is more depleted.
There's a widget you can use in dashboard in the mean time. Located here:
http://www.apple.com/downloads/dashboard/status/mightymonitor.html
We'll wait and see if this is a bug or intentional.
Regards,
Captfred

Will the new Apple wireless keyboard and mouse work with my Macbook Pro?

Looking at purchasing a wireless keyboard and mouse for my Macbook Pro. Figured the one made by apple will work, but not sure... Any suggestions on a good wireless keyboard and mouse, or knowledge on whether Apples will work or not?

keyboard: http://eshop.macsales.com/item/Apple/MC184LLANB/
magic mouse: http://eshop.macsales.com/item/Apple/MB829LLABB/
I just got them last week and the keyboard is new and the mouse is used but looks brand new. And you get a free pair of AA bateries with the mouse. And you can get 2AA batteries for the keyboard for an extra $1.29 I highly recommend going this route as I did very recently and am very pleased.

Wireless keyboard and mouse with emac

Hi,
Does anyone know whether the new wireless keyboard and mouse will work with eMac without built in bluetooth, and USB 1.0?
Should I use a USB 2.0 dongle or a USB 1.0 dongle.
Any help would be very appreciated.
thanks

That is how I use my macbook. When I start up in the moring, I turn the mouse, keyboard and monitor on first, I then hit the power button on the macbook and immediately close the lid. The macbook will then boot up on the external display. Just in case you allow the macbook to go to sleep, you need to go to allow bluetooth devices to wake the computer. You set this in the bluetooth system prefs.
Glor

How can I use LCCS with ActionScript 3 and Flash CS4?

Hi,
Using Stratus I was able to create an an application using Action Script 3 and Flash CS4. The sample code on the Adobe site was quite straight forward and easy to understand. I now want to switch over to LCCS but can't find anything any where on how to use Action Script 3 and Flash CS4 with LCCS. Do I need to know Flex to be able to use LCCS? Everything was quite simple and easy to understand with Stratus and makes complete sense. But LCCS is really confusing. Is there any sample code on how to establish a connection in Action Script 3 and then stream from a webcam to a client. There is nothing in the LCCS SDK that covers Flash and Action Script 3. Please help! I found the link below on some forum but it takes me nowhere.
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=72&catid=75 9&threadid=1407833&enterthread=y

Thanks Arun!
Date: Thu, 29 Apr 2010 11:44:10 -0600
From: [email protected]
To: [email protected]
Subject: How can I use LCCS with ActionScript 3 and Flash CS4?
Hi,
Welcome to the LCCS world.
Please refer to the SDK's sampleApps folder. There would be an app called FlashUserList. The app demonstrates how LCCS can be used with Flash CS4. Its a pretty basic app, but should help you moving.
We are trying to improve our efforts to help developers in understanding our samples. Please do let us know if we can add something that would help others.
Thanks
Arun
>

Hi, I bouhgt a used Apple Power Mac G5, I want to buy a blue tooth card for the same to use wireless keyboard and mouse, i am just curious that why do i need to provide the serial number of my computer, is there any compatibilty issue?

Hi, I am new in Apple Computer, I bought a used Power Mac G5. I want to buy a blue tooth card for the same to use wireless keyboard and mouse. so why it is mandatory to provide the serial number of the machine?

Hello, Serial# not needed...
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto *but not including the Serial#*...
Hardware Overview:
Machine Name: Power Mac G5 Quad
Machine Model: PowerMac11,2
CPU Type: PowerPC G5 (1.1)
Number Of CPUs: 4
CPU Speed: 2.5 GHz
L2 Cache (per CPU): 1 MB
Memory: 10 GB
Bus Speed: 1.25 GHz
Boot ROM Version: 5.2.7f1

Can't use Filevault 2 with Wireless Keyboard and Mouse

Similar Messages

Maybe you are looking for