Can't use HT x 3 on Diamond board, anyone else have this problem?
No matter what I do I can't use the HT multiplier of 3, works fine at 4 and 5 but 3 just give me a no boot up. Anyone else have this problem?
Quote from: K6dude on 09-May-06, 00:05:39
Hi,
If your BIOS was based on version 5.XX then you might like to try version 1.9/3.9 as when I tried that BIOS 3x didn't work either....come to think of it, neither did a few other things!
In fact that BIOS you are using is one that I have not ever seen for the 7100 series, where did you get it? ...and are you sure it is for the SLi version of the board and not for the 7125/Ultra chipset?
Regards
K6dude
The Bios is available from the Diamond Club so its for my board. I have to date tried Bios V1.7, 1.9 1.A1 and 50C and none of them allowed me to use HT x 3.
Tiresmoke, would you mind sending me a pm of your settings? It may give me a clue as to what the problem may be. Cheers.
Similar Messages
-
I can't get facetime to load on my ipod touch. It says unable to connect to facetime server. Anyone else have this issue? Any suggestions??
i bought my daughter an ipod touch and i can not connect facetime from my iphone 4. i get a picture on both but the one that's calling continues to ring and says connecting. is this a firewall issue?
-
The odd thing is the printer works, but the scanner isn't recognized.
I ran the latest Mac software update first, and then reinstalled the HP software. I checked all the settings as suggested from the HP site, but nothing seems to work.
Has anyone had this problem and found a solution?
Thanks
StevenThe odd thing is the printer works, but the scanner isn't recognized.
I ran the latest Mac software update first, and then reinstalled the HP software. I checked all the settings as suggested from the HP site, but nothing seems to work.
Has anyone had this problem and found a solution?
Thanks
Steven -
Hi, at the moment I can only seem to watch a rented movie once - previously I used to be able to watch it as many times as I liked during the 48hr window. Anyone else have this problem?
This doesn't seem right.
I paid for a rental and downloaded an HD movie, Avatar. I could start watching within about a minute, it played without skipping a beat.
My wife started watching the movie the next night and got about half way through.
The next day, she tried watching the rest, and selected the film and clicked on "resume watching".
But instead of streaming and playing like it should, we got the spinning wheel of death followed by a message "Ready to play in 1 minute" which soon became "Ready to play in 2351 minutes"!
Additional information that I can add is that it was Sunday afternoon which is peak time for internet usage and I'd just exhausted my data allowance before the speed limiting kicks in. Basic internet using browsers at that time was really slow.
So it was as though the movie we were going to resume watching was going to be downloaded from the iTunes Store again, and since my connection had been speed limited, it was going to take forever. I thought you downloaded a rental to your hard drive and it deleted itself after it expired? So any subsequent streaming to AppleTV would be coming direct from your hard drive. It shouldn't have been affected by the speed of my internet connection at that time, surely. Anyone else experienced this?
Actually, I just noticed this post, I'm sure it's related...:http://discussions.apple.com/thread.jspa?messageID=12398832� -
my airplay from my MacBook Pro to my tv through my apple tv is fuzzy- it just started being fuzzy about 2 months ago- it used to be clear- anyone else have this problem? How can I fix it?
Hi freezebri,
The following steps may resolve your issue:
Apple TV: Basic troubleshooting
http://support.apple.com/kb/ht1551
If your TV screen appears fuzzy or black (you see no video)
Make sure the television you are using supports the Apple TV resolution requirements. Please see the Apple TV technical specifications.
When you connect power, check to make sure the LED turns on. If the LED is not on, then verify with a known good power outlet or connect something else to the outlet you're using for Apple TV and make sure it works (such as a lamp or clock).
Make sure you're using the correct video cables and that they are connected firmly to Apple TV and to your TV.
Connect the HDMI cable directly into the Apple TV and your television, remove any third party devices or adapters.
Make sure the input setting you've selected on your TV matches the input you have your video cables connected to. See the documentation that came with your TV for more information.
Change the Apple TV resolution by pressing and holding the Menu and Up button for six seconds. The Apple TV will automatically cycle to the next resolution at approximately 20 second intervals. Pressing the Selectbutton will immediately cycle to the next resolution.
If you are connected via HDMI, try unplugging and replugging your HDMI cable.
If HDMI isn't working on an Apple TV (1st generation), try component cables instead (and disconnect the HDMI cable temporarily). Read more about HDMI vs component video.
Hope this information helps ...
- Judy -
I just updated to iTunes 11. This version will not allow me to change info on any songs. Have always use "command i" with previous versions. Anyone else experiencing this problem? A solution?
Hey! I had the same problem you did just today when I was trying to get my second iPhone to sync. What you need to do with music or anything extra that you doing you have to creat a second playlist or picture or anything that you would like to use, so that you can add to the second device that you are going to be using. I am not sure if that will help but it helped me out a lot!! Good luck!
-
Don't know if it's sync or icloud but I have started getting thousands of ithmb files in my pictures library each day. I can't open them and I have to continually delete them. Anyone else have this problem?
Unfortunately... Once the Device is asking to be Restored with iTunes... it is too late to save anything...
See Here > http://support.apple.com/kb/HT1808
However... Once you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Jessica Sanchez wrote:
I am installing itunes to a laptop and have not sync device to this lap. ...
Using a computer, other than the one you have regularily been Syncing and Backing up to, was the begining of your issue. -
I bought my iPhone on Friday and when I tried to use it to make a call (after I had left the store) the screen had turned green - as if a green filter had been placed over it. When I turned the phone sideways the color turned to magenta. Anyone else have this problem? I plan on exchanging the phone but can't get there until later this week.
Next time you post here, you might think about using a title and the provide your description below.
-
I have an iphone 4, when I plug in headphones I can pick up music and only background sounds, but no voices. It happens on every video or movie I see, but music works perfectly fine. Did anyone else have this problem or was it just me? If not can anyone help me?
Hey there Srkupo,
It sounds like your vocal audio is not working with your headphones connected to your iPhone. I would start with the troubleshooting from the following article to help troubleshoot them named:
Resolve issues with iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/ts2634
Update your software
Install the latest version of iOS. You can see which version is on your iPhone by going to the About screen.
If the device doesn't update successfully, the issue might be with your device and not the accessory. Learn how to check your iPhone, iPad, or iPod touch.
Disconnect and inspect the accessory, then restart your device
Disconnect the accessory and turn it off, if possible.
Inspect the connection between the accessory and device and make sure that no debris or other damage is present.
Restart your iOS device by turning it off, then back on. When the Home screen appears, reconnect the accessory.
Try a different device
Make sure the issue is with the accessory, if possible. Always use an identical or similar, compatible device with the accessory you're troubleshooting.
If there's static coming from the left audio channel when you use headphones, try connecting the headphones to a similar device.
If the device isn't syncing when connected to the dock, connect it directly to the computer using the Apple 30-pin to USB Cable or try another USB port.
If you're using Lightning to 30-pin Adapter in a connection chain, try using the same adapter on a similar or identical device.
Restore iPhone, iPad, or iPod touch
Restore your iOS device. You should rarely need to use this step with an accessory issue. If the issue only affects a third-party accessory, contact the manufacturer before restoring the device.
If this does not resolve the issue could you elaborate on where you are listening to this content from to help isolate the issue?
Thank you for using Apple Support Communities.
All the very best,
Sterling -
The 'Swipe to Camera app icon' function is not working. I swipe across but the camera app doesn't start up at all. Does anyone else have this problem? Can it be fixed?
You don't swipe but actually press, hold and push up.
-
I have a problem using Pages. Whenever I type fl I get a symbol instead. Does anyone else have this problem?
Hi Tom
On my machine it seems that the fi ligature doesn't exist with Times New Roman (installed version is 5.01.3x)
It's available in Warnock Pro but the st one which is designed in Warnock doesn't apply.
This last screenshot was made from Linotype Explore, the old free version.
Typography isn't really easy, even with modern tools
Yvan KOENIG (VALLAURIS, France) lundi 6 juin 2011 14:53:01
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer ! -
Every time I try to use the "crop" tool, Aperture crashes. Anyone else have that problem?
It's an old installation, 2.1.4. I'm running OS 10.9
That is the problem. Aperture 2 is not fully compatible with MacOS X 10.9; the crop-tool, the Loupe, some brushes no longer work reliably in the newer MacOS X version. And I really doubt, that there will be bug-fixes for Aperture 2 on Mavericks. These incompatibilities started with MacOS X Lion, and have gotten worse with each new operating system release.
To run Aperture with Mavericks you will need to update to Aperture 3.5. for full compatibility.
Do you also have older plug-ins installed, that might be incompatible with Mavericks? Check with the developer's website, if there are updates for any plug-ins. -
I have recently got pages and have tried to upload my CV (using pages) to certain graduate jobs and it doesn't seem to register them as still asks me to 'select a file'. Does anyone else have this problem?
Menu > File > Export > Word or PDF
Virtually no businesses have Pages to be able to read .pages files.
Definitely not those with PCs, because there is no version of Pages for PCs.
Peter -
The calendar typeface is so dim, I can barely read it. Name of days and date, but not the items I put in. Apple says they have no fix. Anyone else have this problem? Any solutions?
I agree and I found your post because I did a google search ical typeface dim.
If I find anything out, I will post back here. -
Using iPhone 4s and upgrading to iOS 6.1...my phone is losing battery life. Is there a fix? Does anyone else have this problem???
NOLAgal71 wrote:
...my phone is losing battery life. Is there a fix?
Set Up as New Device
http://support.apple.com/kb/HT4137
Maybe you are looking for
-
Opendoc : to pass variable doesnt work
hy, i want pass variable from one report to another i use this formula : "<a href='http://myserver:8080/businessobjects/enterprise115/desktoplaunch/opendoc/openDocument.jsp?sIDType=CUID&iDocID=Ad6ICMdlQV9ElilBHmITZpg&lsSpays=u201D[Pays]u201D&sRefresh
-
I cant find iphoto anywhere on my osx leopard op sys
help....just bought this imac and there is no icon or app for iphoto
-
I installed the latest software on my IPhone, and when I received messages to update my apps it sent me a message stating "your ITune ID is disabled".After sending 3 request for help to support I finally got an answer. Now that I have talked to them
-
Problem with JDBC CONNX (make Rollback)
When we work with tables in BD since Oracle ADF through this JDBC ConnX operate correctly, except when done in a transaction rollback, which produces the following error performance: "Statement not active." To determinate where the error occurred, we
-
N95 - Windows Live Messager - In Downloads
Hiya, I noticed this the other day, but forgot to post it... For those of you who are interested in having MSN Messenger/Windows Live Messenger on your N95's, but haven't already installed it, it's now in the downloads application on the N95, as well