Can't use internet using a network

hi.
i am unable to use internet using wifi, there is this network which when i select shows full signal but the firefox still says "server not found". On running the network diagnostic test it shows a yellow mark on the network setting while ISP, Internet and server have red mark (all under the network status panel). Whats weird is that all my friends who have windows OS are able to enjoy fast wifi connection using the same network while i can't. why is this? how can i run internet on my mac using the same network?
thanks.

The network my friends use is an unsecured network, and it doesn't require any authentication to connect. I am able to connect to the network at other places but the problem is only with this particular network which fails to run internet on my computer despite being connected. Are there any network compatibility issues with macbook, you are aware of? Its embarrassing when my windows OS friends easily access to the unsecured wifi network when i can't. Any ideas or suggestions to make it working?
Thanks

Similar Messages

  • New Ipod Touch 5g can't access Internet in home network (using Linksys E4200 router). But, OK with other Wifi.

    Just bought new Ipod Touch 5g. I found out it can't access Internet in home network. not really cannot access, but very slow to open any web page, App Store failed to access, etc. But, OK with other Wifi (office & starbucks). Others existing iOS devices (Iphone4 & Ipad2) have no problem like this. I'm using Linksys E4200 router at home. anyone has any idea why?

    Try:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>GeneralReset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Can I use a network hard drive for time machine

    Can I use a network drive for my time machine back up.  I currently have a 1TB WD AND its full with mostly videos and other back ups?

    Such a configuration is not supported. This does not mean it will not work, but it is not guaranteed to work reliably.
    Considering the "mission profile" for a backup strategy, you should consider this an unacceptable application for Time Machine.
    Read Apple Support Communities contributor Pondini's Time Machine FAQ discussion regarding this subject here:
    http://pondini.org/TM/2.html
    Scroll down to the pink box.
    There are other, significant concerns regarding sharing a Time Machine volume with other content. Time Machine needs to have control of the whole volume.
    More info here: Mac Basics: Time Machine

  • How can I use Guest network when my internal server provides the DNS?

    How can I use guest network when my internal server provides the DNS? The help article TS4505 tells me to enter an external DNS server, but I believe I can not configure my network that way...

    Apple assumes that you will be connecting the Time Capsule to a simple modem....and.....that the Time Capsule is configured as a router to provide DHCP and NAT services for the network.
    The Guest Network cannot be enabled correctly unless the Time Capsule is in charge of DHCP and NAT services on the network.
    Another way of saying the same thing is that the Guest Network will not operate correctly if the  Time Capsule is configured in Bridge Mode or DHCP Only.

  • I made a pre-booking for ipad2 wifi cellular, i would like to know whether i can upgrade it to IOS6 n IOS7? and i want to know whether can i use 2G network instead of 3G as the 3G network plan is expensive??? and i want to know whether i can access siri ?

    i made a pre-booking for ipad2 wifi cellular, i would like to know whether i can upgrade it to IOS6 n IOS7? and i want to know whether can i use 2G network instead of 3G as the 3G network plan is expensive??? and i want to know whether i can access siri ?

    Siri does Not work on the iPad 2.  iOS 7 is not even out yet, so we have no way of knowing if you'll be able to upgrade to it.

  • If I buy iphone 5 from Sprint ,  can i use GSM network out of the US ?

    If I buy iphone 5 from Sprint ,  can i use GSM network out of the US ?

    hi there,
    you could buy it somewhere in Europe. I know Apple sells them unlocked here in Germany and if I am not mistaken also (among others) in France and Italy.
    Yet, as Peter wrote, the warranty can become a problem. Not sure whether a one country only rule goes for the European Community as well though.
    As for the price, the 16 GB model costs 679,- € (equals roughly 550 £). Currently there is an average delivery time of 4 to 5 weeks.
    LTE connections will not work with Orange or Vodafone. Only EE is about to offer a compatible LTE network. DC-HSPA and regular HSPA+ will work fine.
    regards, Chris

  • I have bought a second hand iphone 4S which is locked on at&t how can i use other network sim on it as i have shifted from US

    i have bought a second hand iphone 4S which is locked on at&t how can i use other network sim on it as i have shifted from US

    Call AT&T and see if you meet their requirements for unlocking the phone.  If you don't, then you'll have to purchase a different phone entirely.

  • Can you use bluetooth network internet.

    My wife got a PC laptop and I do not have a router. Can I use bluetooth to let her connect to the internet through my Imac. If so how.

    Bluetooth would be far too slow for this purpose, unless your wife is happy to use the Internet at dial-up modem speeds.
    Unfortunately you have neglected to mention how your iMac is connected to the Internet, or whether both computers have wifi. You can share an Ethernet Internet connection over wifi to other wifi enabled computers.
    However, it would be far simpler just to buy a cheap 4 port router.

  • Can I use a network hard drive to store my music

    This might be more of an Itunes question, but I would like to know if there is a problem using a network Hard drive to store all my music on? I'll be using 2 computers to access it, 1 computer handles my kids for there Ipods each having there own logins, and the 2nd computer for my Ipod..
    Or do I need to have one computer with 3 seperate logins.. I just want to do things the right way without violating anything.
    Thanks for your help.

    No problem with using network drive. Many do.
    Easiest when doing this from the start but can be done at any time. Some things will depends on drive. For me, only one can access drive at a time. create a folder on network drive for the library to be in. For each user on each computer map the folder on the network drive to a drive letter. Set iTunes to use this mapped drive as the library location.
    Notes to be aware of. Each user will have access to all files on network drive. Files added by one user will be accessible to other users but they must manually add them to their own library. If multiple users subscribe to same podcast there will be duplicate files of episodes in folder. If one user deletes a file from device other users will be affected if tracks was in their library.

  • Can you use a network hard drive to store your music

    This might be more of an Itunes question, but I would like to know if there is a problem using a network Hard drive to store all my music on? I'll be using 2 computers to access it, 1 computer handles my kids for there Ipods each having there own logins, and the 2nd computer for my Ipod..
    Or do I need to have one computer with 3 seperate logins.. I just want to do things the right way without violating anything.
    Thanks for your help.

    No problem with using network drive. Many do.
    Easiest when doing this from the start but can be done at any time. Some things will depends on drive. For me, only one can access drive at a time. create a folder on network drive for the library to be in. For each user on each computer map the folder on the network drive to a drive letter. Set iTunes to use this mapped drive as the library location.
    Notes to be aware of. Each user will have access to all files on network drive. Files added by one user will be accessible to other users but they must manually add them to their own library. If multiple users subscribe to same podcast there will be duplicate files of episodes in folder. If one user deletes a file from device other users will be affected if tracks was in their library.

  • Do I need a airport base station to extend my network or can i use my network router?

    I bought a Airport express to enhance my current wifi in the house, and i can't seem to get it to enhance it. There is one room that dont have wifi and it is the room i bought it for. Now when i talked with apple they said all i needed was the express and it should enhance it, but i can't seem to get it to work. Do i need a airport base station of some sort or does my current router work fine. I just need some help and its been 3 months and its getting old. So i appreciate any help.

    Do i need a airport base station of some sort or does my current router work fine.
    I'm afraid that this will not help you, but at least you will have some accurate information.
    Using wireless only, the AirPort Express can "extend" or "repeat" the wireless network that is provided by another Apple "n" wireless router.
    Using wireless only, the AirPort Express can NOT "extend" or "repeat" the wireless signal if it is being produced by another router from another manufacturer.
    In this case, you will need to connect the AirPort Express to the other wireless router using a wired Ethernet connection. Post back if you need more information about this type of setup.

  • Can I use my networking as normal without ConfigFree?

    Hi all...
    Recently, my configFREE on L20 has a problem. Once I click the configFREE, it says error. So I uninstalled and went to the driver to install the configFREE. Unfortunately it failed. I'm sick and tired to go back to the service center to help me.
    So if I don't install configFREE, am I able to use the networking connection as normal?

    Of course you can. The ConfigFree is tool for network monitoring and not for network configuration. It is also a kind of network diagnostic tool that helps to find out why the WLAN or LAN connection can not be established.
    In my opinion it is very nice and useful toll and you should have it on your system.

  • How can I used local network outside the US

    How can I set up to use local networks of other countries?

    make sure you have the 3G/4G modle if your talking about that, and to use it with a specific carrier you will also need the sim card from that carrier, and you have to restore the device with the sim card from that carrirer in the device, dont forget to back up and tranasfer purchases as well

  • How can I use multiple network connections concurrently?

    I'm using a Macbook, connected to a corporate network via Ethernet and to a private ADSL connection via Airport. What I want to be able to do is use the Airport connection for specific apps (Firefox, Safari, RDP etc) and the Ethernet connection for anything that needs to access any internal resources (Exchange etc).
    From what I've tried, the OS presents the primary connection (set via the Service Order configuration) to the application and nothing else. For example when Firefox is set to not use a proxy I can't access anything, unless the Airport is given priority. But when the Airport is set as the higher priority adapter via the Service Order then I can't access any of the internal network.
    Is there any way to work around this or am I stuck chopping and changing whenever I need to get out to the Internet directly?

    The highest priority service is the Internet connection. Anything that would go to the internet uses that service. However, you still should be able to access the internal network via Ethernet.
    For example when Firefox is set to not use a proxy I can't access anything, unless the Airport is given priority.
    That make sense
    But when the Airport is set as the higher priority adapter via the Service Order then I can't access any of the internal network.
    You should be able to at least access file servers.

  • Can I use a networked Macbook as a storage device?

    I am needing to see if my idea will work and need some ideas.
    I have a macbook in which the screen became damaged this summer. Everything else is running fine.
    I am teaching Journalism and would like to use the macbook as a storage device for my students photos. I teach in a classroom with 14 Windows XP computers and they go to a switch, which in turn goes out to the network & Internet. I would like to plug the Macbook into the switch and have each one of the computers access it for the hard drive storage.
    Is this a possibility? If so, does anyone have a website they can guide me to that would have directions on how to do this? I have done a search and the only thing I can find is making a server for your website. So, I am thinking that I must be searching the wrong terminology.
    Thanks in advance for any help you might be able to give.

    Let me just tell you how to set it up. On the Mac, do the following:
    Go to the Apple Menu, then System Preferences, and select Sharing. Enter a computer name that doesn't have spaces in it for the sake of simplicity. Check the box for File Sharing, then click File Sharing. Click the Options button. Check the box for Share files and folders using SMB. Check the box for your user account, and enter your password. You can now exit System Preferences.
    On the Windows PCs, go to Start, then Run, and type \\computername and hit enter. You should see Randy's Public Folder or something like that. Right click it and say "Map Network Drive." Check the box for Reconnect at Login, pick a drive letter and hit Finish. Tada!
    So how do you use this? On the PCs, the drive you picked will be the public folder on your Mac. When students open the drive they'll be able to read (only) all the files in the public folder. They can write (only) to the Drop Box folder by dragging documents on top of it.
    Now, if you have a PC you want to access this from yourself, you do the same thing but in the Map Network Drive you click the part for connecting as a different user and enter your Mac login credentials. Now you can read and write to the share on only that computer.
    Let me know if you have any questions.
    Regards,
    -Ryan

  • Can you use a network share as location for users' home

    I am running a Mac mini with Mountain Lion and Server.app as a home server. For added storage space I have a NAS. I would like to set up the open directory network users' home share on the NAS. Is that even possible?
    I am able to mount the network share on the mini using either afp or nfs, and I can also add the NAS share as a home folder enabled share in the server.app and select that as location for a users home folder, but that only results in the user not being able to log on to his account. Is there something that I am missing or is what I am trying to accomplish simply not possible?

    It used to be officially supported to use NFS for clients to access their network home directories but with Lion (and Mountain Lion) this was no longer officially supported.
    Therefore the need as I mentioned to 're-share' the volume via AFP. As you implied this does unfortunately impose an additional network overhead as traffic has to go as follows.
    client ----> AFP ----> Server -----> NFS -----> NAS
    What you could consider to help at least a little bit is to connect the server to the NAS on a totally separate network to the network the server uses to talk to the clients on. The main network would be between the server and clients, and you would use a second Ethernet connection just link the NAS and the server. As the clients will not need to talk directly to the NAS this will not be a problem. This would at least mean that each network only gets one set of traffic either AFP or NFS but not both and means the server can use both at full speed at the same time.
    The Mac Pro still has two built-in 1Gbps Ethernet ports but you can also get either a USB3 Ethernet adaptor or a Thunderbolt to Ethernet adaptor (I have used one of these on a Mac mini server).
    If you did not already have the NAS then people starting from new would be better off either getting a Thunderbolt RAID which can be directly attached to the Mac server, or at the higher-end go the traditional route of setting up a SAN and using an FDDI connection.
    Note: You can now get Thunderbolt to FDDI interfaces.

Maybe you are looking for

  • To populate Segment data to Order item level in additional tab B

    Hi Experts, I am working on Inbound interface using IDoc (ORDERS05); during Idoc process IDOC_ORDERS_INPUT; i have to take segment value and need to populate at order items level; in custom field  (in additional tab B). For that i am using FM (Custom

  • How to view iWork files in iPhone

    I was revisiting the WWDC from June and Jobs mentioned the ability view iWork files on the iPhone. I have done a lot of searching and have not found any answers. Can someone help, please?

  • Sliding panel

    I'm trying to modify the horizontally sliding panel to be side by side instead of top and bottom, I was able to make it work on firefox and safari, but it doesn't on internet explore, can somebody help me please.Thanks

  • Just how far does duties as assigned go?

    Pads your resume, hopefully someone will recognize it and you'll be the one delegating the jobs out you don't want to do :)

  • Why doesn't FCP X see my NAS ?

    I just bought a Qnap 809 NAS but it doesn't show up in Final Cut Pro X Is there anything I need to do to make it visible in / useable for FCP X ?