Can't use iworks9.0 after installation... HELP SOS!
i just buy the iworks9.0, but can't use after installation, i ask the technical that because of i download the iworks trial version and update OSX10.6.8 before...
the technician said that i should reinstall the OS from boxset can fixed, but everything need back up...
can anyone help with another method except reinstall the OS, OMG
thx all imac fans... can anyone give me a big hand?
Understandable, but it also says "Intel"...... actually, as far as I remember, iWork came about when Mac went Intel replacing Appleworks which is PowerPC only.
Now, back to the actual problem.....
I've never had the trial versions, so i can't address that problem specifically. I have always used the retail versions (DVD in a box). But, I am guessing that there was a problem because you had the trial version installed and then tried to install from the DVD again. You see, the trial version is a full version except it will only act like a full version if you enter a registration code. The new version (09) does not require a code.
If you cannot delete the applications, then reinstalling the OS from scratch is the next best idea. That means erasing your hard drive which is why tech support said you need to make a backup first so you don't lose your files. It also means you must have your install disk. After that, if those trial versions still show up, I would delete them BEFORE opening them (right after the new install) and then try to install from the DVD again.
Similar Messages
-
im trying to install itunes but a message pops up saying this version is for 32 bit please use 64 bit installer, help?
Okay ... try seeing if you can download an iTunes64Setup.exe from the following download page:
http://support.apple.com/kb/DL1577 -
My iCal has frozen when I tried to add a cut and paste to the calendar for notes on a meeting I'm attending. I have to force quit but the next time I open it is still frozen and everything I've tried doesn't erase the message so I can continue using. Can't use at all. Help!
I have the same problem--have you found a solution?
-
How can I use aperture after receiving the full adobe suite? It won't allow me to use it. I receive a dialogue box which states previews are not allowed in aperture and the application is shut down.
Aperture is Apples version of Lightroom. This has nothing to do with Adobe. Ask on a Apple forum. You won't find many people here using this program.
Mylenium -
I triued installing the itunes update on my iphone & now it has the USB connector icon on the screen & I can't use my phone. Help?
Can you please explain what happend and tell us exactly what you were doing before the mishap occured? Your ambigous post will not help us help you.
-
Can i use my ipod to help a friend locate stolen phone?
Can I use my Ipod to help a friend track a stolen phone?
If you have the find my iphone app on your ipod and you sign inot their account, and they set up find my iphone on the iphone, then you may be able to locate it.
-
I have an iphone bought in the UK but I'm in Europe and can not use it I need help please help me thanks
wiliiam rrichard wrote:
Because My iphone is Locked on the United Kingdom
No it is not. iPhones, like all cell phones are not locked to countries. They are locked to carriers.
Only the carrier to whom the device is locked can unlock it. Contact the carrier. -
[SOLVED]Can't boot Arch after installation-grub use wrong uuid in bios
Hello I would like to ask for Your help and say hello. I'm new here.
I have one big problem with Arch. Can't boot it after base installation. The same problem with Arch, that was mentioned in this topic:
https://bbs.archlinux.org/viewtopic.php … 7#p1294597
I have the same problem and the same error:
No such Device: ad4103fa-d940-47ca-8506-301d8071d467.
Loading Linux core repo kernel ...
error: no such partition.
Loading initial ramdisk ...
error: you need to load the kernel first.
Press any key to continue..._
I'm new here, and with Arch, could you explain me how to fix it? I tried the solution given in the link above, several times but with each time i have errors and warnings from the post 1 in mentioned topic. I installed my Arch from usb thumb drive. Maybe this is something to do with it? Also, my hard drive that Arch is installed on is being connected to a "raid card" named Adaptec, but during installation my disk is being found so i think that drivers is present and works ok, so it is not related to this, also there is no raid present, i use it only as a mean to connect to motherboard because there is not enough sata port, and because:
https://bugs.archlinux.org/task/35626
he wrote that this error is also on virtualbox, so it is not my fault and Adaptec related issue.
I haven't tried this yet:
Sotanaht,
I had the exact same problem as you, but I was able to fix it by replacing the bad grub.cfg file with the grub.conf file found in the same directory. If you try this do not forget to back up your original file (just in-case smile)
because i don't know much about it, don't want to destroy data on my hard disks or to destroy my other distros (i use Ubuntu with derrativates such as Mint, Kubntu, Lubuntu, Xubuntu, and Slackware 13.37 and 14.00).
If you could explain it in details i would be really happy.
I could post something about my setup, please write what. My computer is:
-AMD X4 PII 955 runinng at 3.2GHz
-4GB DDR2 runinng at base clock (800 if i remember correctly)
-about 7 hard drive disk connected to a sata ports, one adaptec drive that i mentioned above and one dvd-rom
-nvidia GTX260
-850W PSU Chieftec
Last edited by firekage (2013-07-02 08:11:29)Yes, of course. I did it several times with
grub-mkconfig -o /boot/grub/grub.cfg
and the result is always the same - Error posted above.
Here is my grub.cfg file:
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 ad4103fa-d940-47ca-8506-301d8071d467
else
search --no-floppy --fs-uuid --set=root ad4103fa-d940-47ca-8506-301d8071d467
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_input console
terminal_output gfxterm
set timeout=5
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch Linux, with Linux core repo kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-true-ad4103fa-d940-47ca-8506-301d8071d467' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 ad4103fa-d940-47ca-8506-301d8071d467
else
search --no-floppy --fs-uuid --set=root ad4103fa-d940-47ca-8506-301d8071d467
fi
echo 'Loading Linux core repo kernel ...'
linux /boot/vmlinuz-linux root=UUID=ad4103fa-d940-47ca-8506-301d8071d467 ro quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux.img
menuentry 'Arch Linux, with Linux core repo kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-fallback-ad4103fa-d940-47ca-8506-301d8071d467' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos5 --hint-efi=hd0,msdos5 --hint-baremetal=ahci0,msdos5 ad4103fa-d940-47ca-8506-301d8071d467
else
search --no-floppy --fs-uuid --set=root ad4103fa-d940-47ca-8506-301d8071d467
fi
echo 'Loading Linux core repo kernel ...'
linux /boot/vmlinuz-linux root=UUID=ad4103fa-d940-47ca-8506-301d8071d467 ro quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux-fallback.img
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
It is wrong, the root partition is different than in this, we can see that this grub leads to wrong root partition, i posted my root partition at the bottom from /etc/fstab. I don't know how to fix it - i'm not familiar with the dos names (hd 0,5 and so on).
Here is my /etc/fstab:
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/sdb2
UUID=59603166-5d8a-4aaf-81f7-5a822fd630e5 / ext4 rw,relatime,data=ordered 0 1
# /dev/sdb1
UUID=20028674-d7e8-4bf4-8551-64f133641962 none swap defaults 0 0
(END)
Last edited by firekage (2013-07-01 06:26:59) -
Eth0 inactive after installation HELP HELP HELP
Hi Gurus,
I installed oracle enterprise linux “Enterprise Linux R4 update 8 (Media Pack for x86 (32 bit) on VMWARE SERVER 2.02. After installation my eth0 was inactive and i have tried to activate but it is still not active, what can i do guys to activate my eth0 .ANY SCRIPT OR WORK AROUND PLEASE HELP.After running the ifconfig, my IP address is not showing.I configured manually not dhcp
Edited by: user464343 on Oct 10, 2010 12:13 PMu can start it manually from the gui
by typing the following as root
#system-config-network
then set the ip and dns
and save then activate
or by the command line
using the commands
#ifup eth0
#ifconfig eth0 ip/netmask -
I can't open firefox after upgrading to 4.0
I get the message over and over again that i have to restart my computer for upgrading to firefox.
I tried new installation. But i got problems on all my accountsStart your '''Computer''' in safe mode. Then start Firefox. Try '''Safe''' web sites.
Starting The Computer In Safe Mode;
If running, turn your computer off.
Remove any disks and thumb drives that are in your hard drives or ports.
Now start your computer but also;
'''Windows; '''Press the <F8> key repeatedly.
'''Mac: '''Hold down the Shift key.
'''Linux; '''Using the command line, Linux/Unix computers can be booted
into various run levels that determine which resources are loaded.
For example, "runlevel 1" is typically the equivalent to Windows and
Mac safe modes.
* Source; '''[http://encyclopedia2.thefreedictionary.com/Linux+Safe+Mode Safe Mode; Free Online Encyclopedia]'''
When the '''Boot''' menu is displayed, release the key you were pressing.
You must now choose what mode to use. The most used are;
* Safe Mode; The computer runs with only a minimum set of programs.
* Safe Mode '''With '''Networking; Same as above, but with internet access. -
E71 - how can i use the gps, please help
I have never used GPS before, i got E71 last week, it says in the manual that there is an inbuilt gps receiver in it.
From the discussion here it looked like i still need something else to use the GPS. I saw someone
mentioned 'Mapping', does E71 come with this program or do i need to get it from somewhere?
Can someone tell me how i can use the GPS in the E71? Is it possible to use gps in this phone without paying additional charges?
Many thanks.
Solved!
Go to Solution.Phones with free navigation
Nokia E72
Nokia E71
Nokia E66
Nokia N97 mini Gold Edition
Nokia N97mini
Nokia N97
Nokia N86 8MP
Nokia X6 16GB
Nokia 5800 XpressMusic
Nokia 5235 Ovi Music Unlimited
Nokia 5230
To find Ovi Maps for other phones visit Maps Support-http://www.nokia.co.in/get-support-and-software/download-software/maps-support/compatibility-and-dow...
How to install and setup GPS in nokia E-71.
Firstly Install Nokia Ovi Suite (advance version of PC Suite) in your respected computer.
http://www.nokia.co.in/get-support-and-software/download-software/nokia-ovi-suite
After installation of Nokia Ovi Suite go to following link
http://www.nokia.co.in/explore-services/ovi-maps/downloads?intc=ncomexpserv-fw-ilc-lft-con-na-ncomex...
Now install the the second link file into your phone, i.e., "nokia_maps_3.03_10wk11_b04_s60_3.1_rom.Nocs.sis".
After successful installation connect your phone with data cable in PC Suite (DON'T run PC suite application in your system) mode and open Nokia Ovi Suite application in your system.
Now in Nokia Ovi Suite application click on View-Go to-Maps (make sure your system is connected to Internet and your mobile phone key pad doesn't get locked, if keypad autolock period is on switch it off for that moment and your phone is fully charged, now in maps select Asia in that India and download that India Map (103 MB) into your phone.
Please Note that do not disconnect your phone from data cable else maps will not get downloaded and will not to be
transferred to your phone.
After successful installation of maps into your phone download "Voice Guidance Languages", which ever is preferred by you, if you really want to enjoy it. Like- English(UK)-with street names or in Hindi, Tamil, Urdu.
Now you are almost done, just take your phone into your hand,
Go to Maps then select Options-then Settings
Internet-Connection-Offline ( don't worry your GPS will work fine as data bearer is Nokia which is free of charge, so just relax).
Navigation-Drive Guidance-Select the desired Voice
Walk Guidance-Select the desired Voice or you can set it to Beeps and Vibrations (if downloaded).
Home Location- define you home location by searching in maps, this will make easier to drive back to home by simply selecting Drive Home option while using navigation.
Now go to option Map-Categories-select the categories you want to be shown on the map.
Its DONE, now search for any desired location press the selection button and then select Drive to or Walk to option and you will be connected to GPS.
Please Note as GPS needs free environment so it may not work in home and generally it takes 10-15 minutes to connect so please be patient. -
I can't stert PSCC after installation Mac
After installation on MAC OSX 10.09 I have a question mark on PSCC icon and it does not start after clck. Help please
Hi Piotr033,
Are we getting any error when we try to launch PS cc?
Moreover you can refer the below links for launch issues.
http://helpx.adobe.com/creative-suite/kb/troubleshoot-launch-issues-problems-cs5.html
Regards,
Prabs -
When I turn on my imac and open 'Safari' it takes me to a gray page; it's the 'favorites'page. I can't get it off the screen and go to my home page to use the internet. I can't use my computer. I was just in the Apple store in baton rouge, la. today, but unfortunately, I can't reach them by phone for help
Force Quit .
Press command + option + esc keys together at the same time.
Wait.
When Force Quit window appears, select Safari, if not already.
Press Force Quit button at the bottom of the window.
Wait.
Application will quit.
If this does not help, press the power button for 7 or more seconds.
Computer will shut down.
Restart.
Hold the shift key down and launch Safari.
Best. -
Can't use Airplay after 7.0.2 ATV 3 update!!
I can't use Airplay at all on my upgraded 7.0.2 ATV3. No audio and no video. I can have the picture up and running on the iPad Air 2 or iPhone 6 and try to send it to the ATV 3. I get an "unable to send video" warning on the unit sending the airplay but absolutely nothing on the ATV 3 screen. Then Airplay unchecks the ATV 3 and defaults back to the iPad or iPhone.
Using the same iPad and iPhone, I just tried to use the other non-updated ATV 3 in my den and there was absolutely no problem. I just tried to send something from my Mac Mini to the updated ATV 3 and it wasn't even showing as an airplay option although it was there Friday night! The non-updated ATV is still shown as an option. I've checked the ATV3 settings and nothing has changed. I've forgotten and renewed the network on the ATV 3 and it's testing fine.
Anybody have any clues? I've checked everything I know how to check! The only conclusion I can come to is that the update bricked my Apple TV when it comes to Airplay!.After many starts and restarts, I've finally got it working again. Don't know what caused it to start working again.
Tried to delete/change the original post, but it wouldn't let me edit it! -
How can I use a manually created help file
Is it possible to use a manually crated help file *.hlp (microsoft help file) in a oracle forms application.
I want to open the help file from in my help menu. How can I do that??
JouryHi,
Have you tried WIN_API_SHELL.winhelp and WIN_API_SHELL.winhelpex?
Both are available in D2KWUtil.PLL, usually included in Forms demos.
Pedro
null
Maybe you are looking for
-
How to restore documents after a clean install when location is not known?
I have had some troubles with my computer recently and the person at the genius bar said I should wipe my drive clean and include everything except my library folders and system folder. The only thing I don't know how to restore is documents that are
-
OBYA Settings for Intercompany Customers and Vendors
Hi SAP folks, I have a small question on TC: OBYA We have 2 co codes (CC10 & CC20) . We have customer and vendor account with the same number 900CC10 in Co Code CC20 and customer and vendor account with the same number 900CC20 in Co Code CC10 The re
-
Query Problem - Exclude operation is not supported for this characteristic
Hello all I have a little issue with a report problem i have been given and wondered if anyone had any knowledge of this. We have a report witn two heriarchy variables for profit centre. One is a authorisation variable and the other a custmer exit. W
-
Inserting Multiple Records in Transparent Table
Hi Friends, I am New to ABAP and Previously i was in Web Dynpro Java.... I am doing an scenario Travel Request. The Problem i am facing i this scenario is inserting the data in the table. I have to maintain a custom table in which Travel request No (
-
Hello, I'm able to find AS2.0 code for a tooltip, but can't seem to find a simple one for AS3.0. When the pointer hovers over a point on the map, a tooltip appears with the name of the city. I need to be able to change the city name depending on the