Can't use keypad for IVR during call

When I am in a call talking with an IVR system (the one that ask you to type numbers to select options), but keypad does not send these numbers out.
Instead it show them on the screen to allow me to use them for storing it as a new phone number.
How can I "tell" it to send them on the call?
I'm using X2 (with Hebrew S40 OS)

thanks, it worked, but the interface is very complicated, as I need to pass via few IVR selections, it is complex to go to this option every time.
Is there an option to make this the deafult way the phone will work? So every time I'm on a phone call and click a number it will be sent to the IVR system without the need to go to the DTMF menu

Similar Messages

  • Can I use touchID for accepting a call?

    In security mode I can only swipe to accept call , sadly can it be a good idea to use TouchID for it?

    Edeke wrote:
    When the iPhone is locked to open you use the 4 digit code or your fingerprint identification to open you're iPhone, this is for security so I call it security/safety mode.
    I know the home button when the iPhone is locked is pretty much useless.
    Therefore my question; can it be a good idea to accept a phone call using TouchID? Maybe with a toggle on/off inside settings.
    Everybody has access to an unattended mobile phone to accept a call even when locked not to your email/messages conversations.
    Not logic in my view.
    TouchID is enough to prevent unattended calls from your trousers or bag, before TouchID we had the push, swipe and a 4 digit code to prevent it.
    So, you want to make it so that only your fingerprint can be used to answer an incoming call to your iPhone, when it is locked?
    If that's correct, let me explain why I think it's a bad idea and it will never be implemented.
    Hypothetical situation:  You accidentally leave your phone at the mall.  An honest person finds it, then turns it in to the security office.
    You try to call your lost iPhone from another phone, hoping someone will answer it and tell you where your phone is.  But even though the security officer has the phone, he cannot answer the incoming call, because you've locked it to just your finger print.
    That's just one of a dozen situations where this feature is a bad idea.  But feel free to submit your input to Apple at www.apple.com/feedfback.

  • WebLogic: Can I use CMP for HTTP/XML calls like I can for JDBC ConnPools

    I have an Entity EJB that I currently persist using WebLogic's CMP with an Oracle Conn Pool and JDBC. I have a new persistance (home-made) storage system that talks XML over HTTP. No real SOAP implementation except in the XML/HTTP communications.
    Questions:
    Can I still leverage CMP to persist entities - such that I could create a pool of XML/HTTP objects (that open a java.net connection - send a URL request in XML format) and have CMP handle persisting as it does now?
    I would think there is some universal way to create a pool of communication objects to talk to anything if you define the mechanisms..right? If so, how do I get CMP to see that? In other words, is CMP only applied to "Known" data sources? Or can I give it my own..create my own weblogic-cmp.xml file.

    So, you have a home-made persistence solution with your own API and you expect CMP (_Container_ Managed Persistence) to be able to hook into that? Unlikely, right?
    Maybe you could implement a JDBC driver on top of your persistence scheme, then you might have a shot.
    Vlad.
    P.S. Entity beans' performance is so bad everyone recommends against using them -- doing persistence over something as slow as HTTP would only make matters worse.

  • Can i use ipad for making calls

    Can i use ipad for making mobile calls Or is it that we can use it for data only.

    The iPad is a data only device. However, you can make calls using Apps such as Facetime, Skype, Viber.

  • Is there any other ways to check whether is my phone faulty or my sim card issue. I can only use it for call, my network to 3G or 4G suddenly cannot use.

    Is there any other ways to check whether is my phone faulty or my sim card issue. I can only use it for call, my network to 3G or 4G suddenly cannot use. This happen since yesterday, suddenly can use but suddenly cut off. Called Telco and they reset account but still same.

    See this
    http://support.apple.com/kb/TS4148

  • How can i use AME for the new OAF page.

    Dear all,
    I have developed a new OAF page and registered under Employee Self Service.
    How can i use AME for the approval process.
    Appreciate your ideas?
    zamora

    I will try to answer based on my experience of working with iProcurement and AME. It depends on how you want to make a call to AME , directly from OAF Page or from Workflow and your requirement. You didn't specify what you want to show the users on OAF Page and your business requirement.
    Before calling AME Engine from the OAF page or workflow, I guess you did already setup AME Transaction Type and it's Approval Groups, Conditions, Action Types and Rules. Do some testing from AME Business Analyst Test Workbench. Please note that, AME provides lot of PL/SQL API's that you have to call from your programs (java or workflow pl/sql)
    Let's look at the workflow and putting an OAF Page as notification.
    As Sameer said, you have kick-off workflow process from PR of CO and with in the workflow function, you make a call to AME Engine API's with the AME Transaction ID. This transactionId belongs to the AME Transsaction Type that you setup. Based on the rules setup, AME Engine generates list of approvers/approver and stores them AME Tables for that transactionId. Then, it sends a notification to the approver.
    In the workflow, where that notification is defined, in the message body you have to put an attribute(&XX_WF_FWK_RN) of type document/send. And this attribute will have the constant JSP:/OA_HTML/OA.jsp?OAFunc=XX_FUNC&paramId=-&DOCUMENT_ID-. This function is SSWA Jsp function that makes a web html call to your OAF Region.
    If your requirement is to just show the list of approvers on the OAF Page, you may have to call AME API diectly passing your AME TrasnactionId with other parameters. Then AME generates list of approvers and stores them in AME tables with each approver status. You can pickup those approvers using VO and show them on OAF Page.
    Hope this gives some idea.

  • Drivers/Utilities CD..XP and VISTA..can I use vista for WIN7 64 bit install?

    Drivers/Utilities CD's, that came with the p-35 Motherboard..XP and VISTA..can I use Vista for WIN7 64 bit install, or download the chip set drivers for Awin7 BEFORE the OS install??
    MSI P-35 Platinum
    Q6600 Core 2 Quad
    Presently XP 32Bit
    NVidia geforce 8600GT
    8GB DDR2 SDRAM PC6400-800MHz
    Windows 7..waiting to be installed.
    Hello,
    I WANT TO DO A CLEAN INSTALL.I have Windows 32 Home XP, I have the Win7 OEM I want to install.
    When i bought my MSI mobo, it came with both the drivers and utilities for XP and Vista.   Can I use the chip set drivers and utilities for Vista, until i can go to MSI and download the latest chip set drivers?  When do i install these drivers....before the OS install, or after?
    Can I format these drives first, go in the BIOS change to boot sequence from Raptor Boot Drive to the DVD/Rom to boot the WIN7 from, or should I format while installing Win7?  
    Someone on another forum suggested that 1) disconnect the two droves, then install the OS on the boot drive, and2) before win7 install, make the proposed boot drive (NOT THE DVD/CD ROM the first choice priority for the boot sequence....is this right?
    Is it absolutely necessary to unplug the other two drives, while formatting and installing the WIN7 O.S.?  People tell me that there is a chance of the OS installing sometimes on the other drives.
    Also, if I want to change the now present boot drive Local disk letter (C) to my storage drive (G) and the other two drive letters, can I do this in manage disks, anytime, or only during windows setup install?
    Thx

      I've never had this much trouble hooking up a HDD.
           I have two IDE DVD/CD ROMS.  (My RAID MODE was IDE in XP OS, and still is with WIN7.)
           I have three SATA HDD's.
    After unplugging the SATA 2TB HDD while I installed the WIN7 OS on the 500 GB HDD (it was on the 74 RAPTOR, but I moved location, and made absolutly sure nothing went on my raptor)
      So today I decided to re-hook up the 2TB Storage HDD, and when I did, I went into bios,and to the cell menu, and LOAD ALL DEFAULT SETTINGS, so it could see my newly installed HDD,which I had all my backup Data from the previous HDD. I also checked and the RAID MODE was IDE, and the boot sequence was the WDC 500GB Boot/OS drive, rebooted,then I got that annoying blanked out screen with that blinking cursor, so I got back into the bios,and changed the 1st boot to the IDE Pioneer DVD/CD ROM, 2nd boot to the 500GB HDD, and rebooted again..still got that blinking cursor.
    I opened up the Mobo, checked and replugged all SATA, and power cables to the three HDDS, tried it again,then still got the blinking cursor.  Seems no matter what I change in the boot sequence,it never wants to boot properly
    ....AND THEN,
     I started with TAB > POST> started WINDOWS, then once it opened up, I went to manage Disks, saw all three HDDs were online and healthy.  Win. Explorer also listed them in that folder, in device manager, it listed all three too.
     The managed window showed this:
    74GB    (system,active,Primary partition)                       Storage
    2TB     (Primary partition)                                           Excessive Storage
    500GB  (Boot, page files,crash-Dump, Primary partition)   Operating system
    Both the PCI IDE BusMaster and ON-Chip SATA Controller were both ENABLED.
    Before I just got online, I tried RESTART, and it opened Windows the usual way,  so I hope I don't have any more problems. It worked fine BEFORE I just plugged in the 2TB HDD back in.
    I pretty much did what everyone suggested,except for leaving in the 74GB Raptor when I installed WIN7, which prompted me to format the drive prior to installing the OS.  Also, when I changed the IDE, RAID,and AHC1, to the AHC1 Mode, just before I installed Window7, like a few suggested, I also had problems, so after the install, I went back and changed it back to IDE.  My Floppy was an IDE, but I removed it from my system, and disabled in BIOS, but even a few times I went into Bios and saw that thje floppy was 1st Boot, even though I changed to either the DVD/CD Rom, or the 500GB boot drive.            
    So what is the preferred boot sequence?   

  • Can you use FaceTime or iChat to call a non-iPhone?

    Can you use FaceTime or iChat to call a someone who does not have an iPhone?

    Hi,
    Yes.
    Just to be clear let me qualify that.
    FaceTime can contact other devices that use FaceTime either by a iPhone Number (includes some iPads) or an Apple ID.
    There is a FaceTime for Mac version so the person you contact (by Apple IDs) does not have to be on an iPhone.
    As well as iPhones certain other iOS 5 devices can use FaceTime and these include iPads as already mentioned and certain version of iPod Touches.
    As iChat does not work to iPhones and is an Instant Messaging app that can do Video and Audio Only chats and Screen Sharing, File Transfers, Pics-in-chats, iChat Theatre and more then the answer is also Yes.
    I suspect the question was really "Can I contact other phones that can do Video using FaceTime ?"  the answer to that is No.
    iChat can Text chat to most client apps on Phones (Jabber or AIM for instance)
    Video needs iChat (Or AIM or Trillain on a  PC).
    9:45 PM      Thursday; April 19, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Can I use Skype for my business?

    Hi,
    I have a SKype number and been using it for my business for a year already. Today I've received an email from Skype saying that I can't use Skype for commercial purpose. I'm confused because I've seen so many people saying that they use Skype for their business. Here's the message I've just received:
    "We have noticed some prohibited usage of your subscription.
    We will continue to monitor your account, your calling behavior and your overall activity using Skype. If the prohibited usage still continues, your subscription will be disconnected. You will no longer be able to use or purchase any of Skype’s paid-for products.
    The suspension of your access to Skype paid-for products will be permanent and you will be unable to transfer any existing products to a new Skype account, or receive a refund. However, you will be able to continue to make Skype-to-Skype calls and send instant messages.
    We remind you that Skype’s products are for personal, individual and non-commercial use only. Our Fair Usage Policy can be found within our term of uses. Our subscriptions cannot be shared or used for commercial gain, such as telemarketing or call centre operations"
    Do I have to register for a business account or what? Or what should I do now? This number have been using as my business contact and I can't change it. Please help.

    Hello and welcome to the Skype Community.
    What type of business are you engaged in?
    https://support.skype.com/en/faq/FA34551/what-s-the-difference-between-skype-and-skype-for-business
    http://www.skype.com/en/legal/tou/
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • Music on Sound Track Pro? Can we use this for commercial use?

    Does anybody know what the license agreement for the music that comes on the Soundtrack Pro software? It says it's royalty free, but can I use this for commercial use?

    Short answer is yes.  Long answer is read the license agreement and call your lawyer with any questions.
    A couple of years ago I noticed that there were some loops belonging to APM, and raised the issue with them.  It's licensed to Apple and through Apple to you as an owner of the software.  You can NOT repackage and sell the loops though, only use them in your productions.

  • Can I use JMS for this?

    User logs into our administrative console, selects a job, clicks run.
    Behind the scenes, the run command actually creates a job and returns XML which provides a long list of commands that need to be executed in order for that "job" the user triggered to be complete. This XML contains everything from shell scripts that need to be triggered to PL/SQL functions and stored procedures that need to be called...and they're listed in this XML file in the order they need to be executed and the next process in the list can only be executed when the process before it is finished. This all needs to go on behind the scenes, uninhibiting the user's experience on the website...so that's why I thought I might be able to use JMS but it seems everything needs to be written in java for this to work, which is a problem being I need to trigger runtime processes on the Linux box to execute shell scripts, which are not written in java...how would those shell scripts communicate with the JMS?
    Anyone doing anything like this? Examples somewhere? It's kind of like a job management console...the jobs are pretty complex and can take up to 45 minutes or more to complete, which is why we need to come up with a way to run them from the app server, but in the background, asynchronously from the user's website utilization. This obviously, because of the time some of these take to complete, can't be a request/response architecture...
    Thoughts? Help? Anything greatly appreciated.
    Thanks!
    rlb

              poorni wrote:
              > Hello everyone,
              > I need to send an alert message from the client to a server(which is
              > remote). Can I use JMS for this?.
              Yes.
              If so can anyone please suggest me
              > an open source JMS provider.
              WebLogic has JMS built-in.
              > Thank you,
              > poornima
              

  • Can I use JDeveloper for Data mining

    Can I use JDeveloper for Data mining, instead of using stand-alone data miner.
    Secondly, if I can, do we require to create another schema and run all the required scripts for data miner or it is not necessary.
    Thanks in advance.

    ODM 9i provided a JDeveloper Pluggin called DM4J. In ODM 10g, this was replaced by the standalone Oracle Data Miner GUI. In 10g, you can use the API in JDeveloper, but there is no support via wizards or viewers.
    However, models that you create via the API through JDeveloper could be used in Oracle Data Miner for testing, scoring, and model detail viewing.

  • Can I use lion for my Desktop?

    Can I use lion for this :
    Hardware Overview:
      Model Name:          Mac Pro
      Model Identifier:          MacPro5,1
      Processor Name:          Quad-Core Intel Xeon
      Processor Speed:          2.8 GHz
      Number Of Processors:          1
      Total Number Of Cores:          4
      L2 Cache (per core):          256 KB
      L3 Cache:          8 MB
      Memory:          12 GB
      Processor Interconnect Speed:          4.8 GT/s
      Boot ROM Version:          MP51.007F.B03
      SMC Version (system):          1.39f11
      SMC Version (processor tray):          1.39f11
    Thanks
    Dan Page

    The hatter is correct that it was pulled. But this is to avoid people buying it by accident.
    If you are certain 10.7 Lion is what you want, it appears you can CALL the Apple online store and they will arrange to sell it to you.
    The same appears to be true of the 10.6.3 DVD. CALL the Apple online store to order.
    http://store.apple.com/us/help/contact

  • How can I use TopLink for querys that have two and more tables?

    I use TopLink today, and I can use one table to query, but how can I use TopLink for querys that have two and more tables?
    Thank you for see and answer this question.

    You can write a custom SQL query and map it to an object as needed. You can also use the Toplink query language "anyOf" or "get" commands to map two tables as long as you map them as one to one (get command) or one to many (anyOf command) in the toplink mapping workbench.
    Zev.
    check out oracle.toplink.expressions.Expression in the 10.1.3 API

  • How can I use OCCI for oracle8.1.6?

    my database is oralce8.1.6 for solaris8.
    I want to develop database application by OCCI .
    But only oracle9i has OCCI.
    How can I do?
    Where can I get OCCI ,and how can I use it for oralce8.1.6?
    thank you very much!!

    OCI is available for all versions of Oracle including Oracle
    7/8/8i etc. However it is not installed by default with these
    versions. I am assuming that the default 9i installation
    includes OCI. You should be able to install OCI for other
    versions through one of the development platforms e.g. ProC/C++
    etc.

Maybe you are looking for