Can't use multiple speakers?

when trying to play music on both my desktop and my stereo (where the music is playing now), after clicking on the mulltiple speakers tab, I get a message saying that my express "doesn't support playback as part of a group."
can someone tell me why this so and if there is something I can do about it?
thanks,
jeff

Upgrade the Express to firmware 6.3.

Similar Messages

About iPad iOS 4.2 beta Airplay can't use multiple speakers?

About iPad airplay can't use multiple speakers?
My iPad use the latest ios4.2 beta1 ,there is 3 airport express in my house.
In iOS 3.2 I can use the App "Remote" to control 3 speakers perfectly,but "Remote" even can install in ios4.2 ,not use smoothly.
After I upgrade iOS to 4.2, I can use Airplay to control each speaker without "Remote",but can't use multiple speakers at the same time. Is anyone like me?
Is there have any other solution can fix this problem?
Thanks!

I completely agree with Tamara, if you are running iOS 4.2, then you should also realize that there are two aveanues for you to get questions answered
1) the developer forums (there is a specific forum area for 4.2 questions, marked in a big red banner across the top saying something about confidentiality.)
2) The bug reporting tool available to developers, noted at the top of the iOS 4.2 forum page. When you go there read the format intructions linked to at the top of the form to ensure you put it in the format that is required for formal developer bug reports.
Jason

Can't Select Multiple speakers for AirTunes

I have had a problem for the past few days now where i can't select to use multiple speakers when using AirTunes.
This has never happened before, and was fine after the update to iTunes 7.
Is there something i need to change / select in my AirPort preferences to make multiple speakers enabled?

Do you have the latest Firmware of the AirPort Express V6.3?
There could be a problem with older versions of the firmware and the new iTunes 7. Then I would also update iTunes to the newest version 7.0.1.

New Version Of iTunes Wont let me use "multiple speakers" thru airtunes...

The New Version Of iTunes Wont let me use "multiple speakers" thru airtunes with airport express.
I have used airport express to play music while simultaneously playing it thru my computer speakers, but the new version of iTunes wont let me select "Multiple Speakers" from the menu at the bottom of the window

There doesn't seem to be a link to this firmware update, can you repost it? I'm having the same problem.
Thanks
J

Can I use multiple iPhones on the same iTunes account? e.g. my wife and I each have iPhones

can I use multiple iPhones on the same iTunes account? e.g. my wife and I each have iPhones

Yes, you can have as many devices - iPhones, iPods, iPads - as you like using the same iTunes account.

How can I use multiple row insert or update into DB in JSP?

Hi all,
pls help for my question.
"How can I use multiple rows insert or update into DB in JSP?"
I mean I will insert or update the multiple records like grid component. All the data I enter will go into the DB.
With thanks,

That isn't true. Different SQL databases have
different capabilities and use different syntax, That's true - every database has its own quirks and extensions. No disagreement there. But they all follow ANSI SQL for CRUD operations. Since the OP said they wanted to do INSERTs and UPDATEs in batches, I assumed that ANSI SQL was sufficient.
I'd argue that it's best to use ANSI SQL as much as possible, especially if you want your JDBC code to be portable between databases.
and there are also a lot of different ways of talking to
SQL databases that are possible in JSP, from using
plain old java.sql.* in scriptlets to using the
jstlsql taglib. I've done maintenance on both, and
they are as different as night and day.Right, because you don't maintain JSP and Java classes the same way. No news there. Both java.sql and JSTL sql taglib are both based on SQL and JDBC. Same difference, except that one uses tags and the other doesn't. Both are Java JDBC code in the end.
Well, sure. As long as you only want to update rows
with the same value in column 2. I had the impression
he wanted to update a whole table. If he only meant
update all rows with the same value in a given column
with the same value, that's trivial. All updates do
that. But as far as I know there's know way to update
more than one row where the values are different.I used this as an example to demonstrate that it's possible to UPDATE more than one row at a time. If I have 1,000 rows, and each one is a separate UPDATE statement that's unique from all the others, I guess I'd have to write 1,000 UPDATE statements. It's possible to have them all either succeed or fail as a single unit of work. I'm pointing out transaction, because they weren't coming up in the discussion.
Unless you're using MySQL, for instance. I only have
experience with MySQL and M$ SQL Server, so I don't
know what PostgreSQL, Oracle, Sybase, DB2 and all the
rest are capable of, but I know for sure that MySQL
can insert multiple rows while SQL Server can't (or at
least I've never seen the syntax for doing it if it
does).Right, but this syntax seems to be specific to MySQL The moment you use it, you're locked into MySQL. There are other ways to accomplish the same thing with ANSI SQL.
Don't assume that all SQL databases are the same.
They're not, and it can really screw you up badly if
you assume you can deploy a project you've developed
with one database in an environment where you have to
use a different one. Even different versions of the
same database can have huge differences. I recommend
you get a copy of the O'Reilly book, SQL in a
Nutshell. It covers the most common DBMSes and does a
good job of pointing out the differences.Yes, I understand that.
It's funny that you're telling me not to assume that all SQL databases are the same. You're the one who's proposing that the OP use a MySQL-specific extension.
I haven't looked at the MySQL docs to find out how the syntax you're suggesting works. What if one value set INSERT succeeds and the next one fails? Does MySQL roll back the successful INSERT? Is the unit of work under the JDBC driver's control with autoCommit?
The OP is free to follow your suggestion. I'm pointing out that there are transactions for units of work and ANSI SQL ways to accomplish the same thing.

Can i use multiple icloud accounts on 1 device

Can I use multiple icloud email accounts on one device?

Yes, you could have multiple iCloud accounts for Mail, Contacts, Calendars, Reminders, Safari, Notes, and Find My iPhone, but only one primary iCloud account for Photo Stream, Documents & Data, and Storage & Backup.

Can i use multiple icloud accounts in my find my iphone app?

Can i use multiple icloud accounts in my find my iphone app? I have multiple accounts that i want to tie to that app.

You can't buy another one. You have to reuse one of the accounts previously set up on your phone, or create a new one to use on another iOS device (running iOS 5 or higher) or Mac (running OS X 10.7.2 or higher), if you have one.

How Can I Use Multiple Weblogic Instances in a Single OS

Hello Everyone,
Actually I have to install Some different applications. Few of them need weblogic 10.3.6 and others need 10.3.4. The OS am using is Oracle Enterprise Linux 5.
Now I am able to install 2 separate(One of 10.3.4 and 10.3.6) instances with two different users,In two different directories.
I have installed the weblogic 10.3.6 version with a user webadmin and installed node manager with port 5556. This is working fine.
The main problem here is :
In the second instance (10.3.4 ) installed with a a different user and gave the port number to NodeManager as 1600 and its not getting started. Its throwing error and also after some errors in the terminal am able to see that its reverting to port number 5556 only.
What might be the issue?
I have to install 2 different versions of weblogic in a single Server. But am failing with NodeManager. What Can I do to have multiple weblogic instances with multiple versions in a single server ?
Can anyone suggest a resolution for this please ?
Thanks in advance.

Pl do not spam these forums with multiple posts - How Can I Use Multiple Weblogic Instances in a Single OS

Can you use multiple plugins on one piece of media?

can you use multiple plugins on one piece of media?
...so for example have one plugin for a UI control bar, another for tracking, and another for advertising?
If this is possible how? What types of plugin would each plugin be and what sort of media element would be required?
Or is this not the correct approach? If not what would the correct approach be?
Thanks in advance for support.

I have got this plugin to set it's proxiedElement.
To do so, I needed to follow David_RealEyes advice too.
But I still can not acheive what I set out to find out, all I was trying to do was trace the current time of the videoElement, to begin to understand how plugins work. Can anyone advise please? Thanks in advance for support.
I thought to acheive this I would just need to add a listener for like this:
dispatcher.addEventListener(TimeEvent.CURRENT_TIME_CHANGE, onTimeChange);
Then write the function like this:
private function onTimeChange(e:TimeEvent):void
             trace('**********onTimeChange: '+ e.time)
...But this doesn't work.
What am I doing wrong?
Here's the class now for the TraceListenerProxyElement
package
    import org.osmf.elements.*;
    import org.osmf.events.*;
    import org.osmf.media.*;
    import org.osmf.metadata.*;
    import org.osmf.traits.*;
    public class TraceListenerProxyElement extends ProxyElement
        public function TraceListenerProxyElement(wrappedElement:MediaElement)
            trace('TraceListenerProxyElement')
            super(wrappedElement);
        // Overrides
        override public function set proxiedElement(value:MediaElement):void
            trace('override set proxy')
            trace('value: ' + value)
            if(value)
               super.proxiedElement = value;
               trace('proxied element set')
               enableListeners()
            super.proxiedElement = value;
            trace('proxied el: ' + proxiedElement)
        private function enableListeners():void
            trace('enableListeners')
            dispatcher = new TraitEventDispatcher();
            dispatcher.media = proxiedElement;
            dispatcher.addEventListener(AudioEvent.MUTED_CHANGE, processMutedChange);
            dispatcher.addEventListener(AudioEvent.PAN_CHANGE, processPanChange);
            dispatcher.addEventListener(AudioEvent.VOLUME_CHANGE, processVolumeChange);
            dispatcher.addEventListener(BufferEvent.BUFFER_TIME_CHANGE, processBufferTimeChange);
            dispatcher.addEventListener(BufferEvent.BUFFERING_CHANGE, processBufferingChange);
            dispatcher.addEventListener(DisplayObjectEvent.DISPLAY_OBJECT_CHANGE, processDisplayObjectChange);
            dispatcher.addEventListener(DisplayObjectEvent.MEDIA_SIZE_CHANGE, processMediaSizeChange);
            dispatcher.addEventListener(DRMEvent.DRM_STATE_CHANGE, processDRMStateChange);
            dispatcher.addEventListener(DynamicStreamEvent.AUTO_SWITCH_CHANGE, processAutoSwitchChange);
            dispatcher.addEventListener(DynamicStreamEvent.NUM_DYNAMIC_STREAMS_CHANGE, processNumDynamicStreamsChange);
            dispatcher.addEventListener(DynamicStreamEvent.SWITCHING_CHANGE, processSwitchingChange);
            dispatcher.addEventListener(LoadEvent.BYTES_TOTAL_CHANGE, processBytesTotalChange);
            dispatcher.addEventListener(LoadEvent.LOAD_STATE_CHANGE, processLoadStateChange);
            dispatcher.addEventListener(PlayEvent.CAN_PAUSE_CHANGE, processCanPauseChange);
            dispatcher.addEventListener(PlayEvent.PLAY_STATE_CHANGE, processPlayStateChange);
            dispatcher.addEventListener(SeekEvent.SEEKING_CHANGE, processSeekingChange);
            dispatcher.addEventListener(TimeEvent.COMPLETE, processComplete);
            dispatcher.addEventListener(TimeEvent.DURATION_CHANGE, processDurationChange);
            dispatcher.addEventListener(TimeEvent.CURRENT_TIME_CHANGE, onTimeChange);
            proxiedElement.addEventListener(MediaElementEvent.TRAIT_ADD, processTraitAdd);
            proxiedElement.addEventListener(MediaElementEvent.TRAIT_REMOVE, processTraitRemove);
        private function onTimeChange(e:TimeEvent):void
            trace('**********onTimeChange: '+ e.time)
        private function processAutoSwitchChange(event:DynamicStreamEvent):void
            trace("autoSwitchChange", event.autoSwitch);
        private function processBufferingChange(event:BufferEvent):void
            trace("bufferingChange", event.buffering);
        private function processBufferTimeChange(event:BufferEvent):void
            trace("bufferTimeChange", event.bufferTime);
        private function processComplete(event:TimeEvent):void
            trace("complete");
        private function processCanPauseChange(event:PlayEvent):void
            trace("canPauseChange", event.canPause);
        private function processDisplayObjectChange(event:DisplayObjectEvent):void
            trace("displayObjectChange");
        private function processDurationChange(event:TimeEvent):void
            trace("durationChange", event.time);
        private function processLoadStateChange(event:LoadEvent):void
            trace("loadStateChange", event.loadState);
        private function processBytesTotalChange(event:LoadEvent):void
            trace("bytesTotalChange", event.bytes);
        private function processMediaSizeChange(event:DisplayObjectEvent):void
            trace("mediaSizeChange", event.newWidth, event.newHeight);
        private function processMutedChange(event:AudioEvent):void
            trace("mutedChange", event.muted);
        private function processNumDynamicStreamsChange(event:DynamicStreamEvent):void
            trace("numDynamicStreamsChange");
        private function processPanChange(event:AudioEvent):void
            trace("panChange", event.pan);
        private function processPlayStateChange(event:PlayEvent):void
            trace("playStateChange", event.playState);
        private function processSeekingChange(event:SeekEvent):void
            trace("seekingChange", event.seeking, event.time);
        private function processSwitchingChange(event:DynamicStreamEvent):void
            trace("switchingChange", event.switching);
        private function processVolumeChange(event:AudioEvent):void
            trace("volumeChange", event.volume);
        private function processDRMStateChange(event:DRMEvent):void
            trace("drmStateChange", event.drmState);
        private function processTraitAdd(event:MediaElementEvent):void
            trace("Trait Add: " + event.traitType);
        private function processTraitRemove(event:MediaElementEvent):void
            trace("Trait Remove: " + event.traitType);
        private var dispatcher:TraitEventDispatcher;

Can we use multiple queries on one template

Can we use multiple queries on one template

Hi,
if you're using data templates for your data set, you
can put multiple queries in the XML data template.
The queries may then be linked (or not) by the "link
name" tag ...
Grtz.Following you answer here...do you know eventually how/if possible to preview a report (with XMLP Desktop) that is using data templates for the data set?
Thanks,
Liviu

Can I use multiple Apple store gift cards per transaction or is it has to be one gift card per transaction?

Can I use multiple Apple store gift cards (£25 each) per transaction or is it has to be only one gift card per transaction?? Does anyone know thanks

Hola, Eddy
notice that you have posted to an old thread (Oct-Nov2013) that actually took quite some time to get attention back then**
I recommend that you contact the Store Group regarding your purchase question - don't let the "iTune-ish" URL and page title throw you off... it's the right place
Store Group - Contact Us - Apple Support
** next time you have a question, I advise to check the dates carefully and if older than a month or so, AND it has no answer to your specific issue, start a NEW Question. You did a fine job of stating your exact issue - many folks, not so much.
buenos dias
CCC

Can I use multiple credit cards with family sharing

My kids are adults. Can I use multiple credit cards in family sharing so they can pay for their own purchases?

Hello Cwb1234,
Thank you for using Apple Support Communities.
From what I understand, you want to set it up that your kids use their own credit cards for purchases within Family Sharing. Take a look at the article linked below, it outlines purchases and payments for Family Sharing and may offer a solution to the issue that you’re running into.
Family purchases and payments - Apple Support
Making purchases
After you set up your family, any time a family member initiates a new purchase it will be billed directly to your account unless that family member has gift or store credit. First, their store credit will be used to pay the partial or total bill. The remainder will bill to the family organizer's card. As the family organizer, any receipts generated by the transaction will be sent to you. Learn more about how iTunes Store purchases are billed.
Once paid for, a purchased item is added to the account of the family member who initiated the purchase. In other words, the content belongs to them, much as it would if you were buying them a book or a DVD. If Family Sharing is ever disabled, each member will keep the purchases they initiated, even though they were paid for by the family organizer.
These are the only current options for payment within Family Sharing.
Regards,
Jeff D.

Can we use multiple "pivot_for_clauses" in 11g SQL PIVOT

Can we use multiple "pivot_for_clauses" in 11g SQL PIVOT. Below SQL is an example of what I am trying to do - In this case instead of using JOIN, can I have three pivot_for_clauses in the same sql?
SQL:
MERGE INTO Test_1 dest
USING (SELECT P1.company_id,trunc(sysdate) as load_date,num_logins,......
FROM (SELECT company_id,action_type_id
FROM Testauditinfo_1 where trunc(audit_date_time)=trunc(sysdate)-1) a
PIVOT (count(action_type_id) FOR (action_type_id) IN ((1) as num_logins,(2) as num_logouts,(61) as
num_logins_from_mobile_device,(16) as num_pref_changed,....)) P1
JOIN
(SELECT company_id,action_type_id,tx_type_id
FROM Testauditinfo_1 where trunc(audit_date_time)=trunc(sysdate)-1) a
PIVOT (count(action_type_id) FOR (action_type_id,tx_type_id) IN ((3,4) AS add_invoice, (4,4) AS
edit_invoice,(3,3) as num_checks,(3,47) as num_paychecks,(3,7) as num_recvd_payments,(3,9) as num_bills,
(3,35) as num_estimates,(3,46) as num_purchase_orders)) P2
on P1.company_id=P2.company_id
JOIN
(SELECT company_id,action_type_id,list_type_id
FROM Testauditinfo_1 where trunc(audit_date_time)=trunc(sysdate)-1) a
PIVOT (count(action_type_id) FOR (action_type_id,list_type_id) IN ((3,2) AS num_items,(3,1) as
num_accounts,(3,4) as num_employees,(3,6) as num_customers,(3,14) as num_memorized_reports)) P3
on P2.company_id=P3.company_id
left outer JOIN
(SELECT company_id,create_date,count(*) as num_logos
FROM qbo.companylogos_1 group by company_id,create_date having trunc(create_date)=trunc(sysdate)-1) P4
on P3.company_id=P4.company_id
ORDER BY P1.company_id) source
ON ((dest.company_id = source.company_id) and (dest.load_date = source.load_date))WHEN MATCHED THEN
UPDATE SET dest.num_items = source.num_items where 1=2
WHEN NOT MATCHED THEN
INSERT (dest.company_id,.....) values (source.company_id,.....);

Maybe
MERGE INTO Test_1 dest
USING (SELECT P1.company_id,trunc(sysdate) as load_date,num_logins,......
         FROM (select *
                 from (SELECT company_id,action_type_id
                         FROM Testauditinfo_1
                        where trunc(audit_date_time) = trunc(sysdate)-1
                      ) a
                      PIVOT (count(action_type_id)
                        FOR (action_type_id) IN ((1) as num_logins,
                                                 (2) as num_logouts,(61) as num_logins_from_mobile_device,
                                                 (16) as num_pref_changed,....
              ) P1
              JOIN
              (select *
                 from (SELECT company_id,action_type_id,tx_type_id
                         FROM Testauditinfo_1
                        where trunc(audit_date_time) = trunc(sysdate)-1
                      ) a
                      PIVOT (count(action_type_id)
                        FOR (action_type_id,tx_type_id) IN ((3,4) AS add_invoice,
                                                            (4,4) AS edit_invoice,
                                                            (3,3) as num_checks,
                                                            (3,47) as num_paychecks,
                                                            (3,7) as num_recvd_payments,
                                                            (3,9) as num_bills,
                                                            (3,35) as num_estimates,(3,46) as num_purchase_orders
              ) P2
           on P1.company_id = P2.company_id
              JOIN
              (select *
                 from (SELECT company_id,action_type_id,list_type_id
                         FROM Testauditinfo_1
                        where trunc(audit_date_time) = trunc(sysdate)-1
                      ) a
                      PIVOT (count(action_type_id)
                        FOR (action_type_id,list_type_id) IN ((3,2) AS num_items,
                                                              (3,1) as num_accounts,
                                                              (3,4) as num_employees,
                                                              (3,6) as num_customers,
                                                              (3,14) as num_memorized_reports
              ) P3
           on P2.company_id = P3.company_id
              left outer JOIN
              (SELECT company_id,create_date,count(*) as num_logos
                 FROM qbo.companylogos_1
                group by company_id,create_date
                having trunc(create_date) = trunc(sysdate)-1
              ) P4
           on P3.company_id = P4.company_id
        ORDER BY P1.company_id
      ) source
   ON ((dest.company_id = source.company_id) and (dest.load_date = source.load_date))
WHEN MATCHED
THEN UPDATE SET dest.num_items = source.num_items where 1 = 2
WHEN NOT MATCHED
THEN INSERT (dest.company_id,.....)
      values (source.company_id,.....)Did you try it ?
Regards
Etbin

Can I use multiple p class="logos" tag with the same name within the same html page?

I was told not to use <div class> tags too many times. I was using them for text, images, to clear floats, I basically built my website using multiple <div class> tags. So if I can't use multiple <div class> tags could I use tags multiple times in the same html page?
I have a string of logos at the bottom of my webpage which will all be using the same css characteristics for all logos. Would this be the proper way to write the code:
HTML
Logo1<a href="...></a>
Logo2<a href="...></a>
Logo3<a href="...></a>
Logo4<a href="...></a>
Logo5<a href="...></a>
Logo6<a href="...></a>
CSS
.logos {
margin-left:10px;
Here's my website: http://www.darbymanufacturing.com/test_website/index.html - this is the website built with all div class tags
I restarted the website in order to write the code properly so that I don't come to errors when uploading on the server like I am having with the website link above.

Instead of writing something like this -
Logo1<a href="...></a>
Logo2<a href="...></a>
Logo3<a href="...></a>
Logo4<a href="...></a>
Logo5<a href="...></a>
Logo6<a href="...></a>
Why not have something like this -
<div id="logodiv">
Logo1<a href="...></a>
Logo2<a href="...></a>
Logo3<a href="...></a>
Logo4<a href="...></a>
Logo5<a href="...></a>
Logo6<a href="...></a>
</div>
with CSS like this -
#logodiv p { ... }

Can't use multiple speakers?

Similar Messages

Maybe you are looking for