Can't use my phone as hotspot anymore!(after updating the iOS)

So I just updated my very new iPhone; from iOS 5.0.1 to iOS 5.1.1.
The problem is that I used to use my phone as a hotspot for my laptop(HP Pavillion), but now it isn't working!
I had some trouble with my former iphone 4S but then I got a completely new one. Actually I'm not sure if it's the iOS 5.0.1 or the iOS 5.1.1 update that is giving me trouble.
I also tried to see if my laptop wasn't updated, but it is now updated and it's still not possible to connect to the internet with my iphone.
What should I do?? Is it possible to downgrade to an earlier firmware?? How do I do this??
Any help is much appreciated
David

Yes lucky me . If all troubleshooting has been done in Resolve iOS update and restore errors and if you have at least taken it into a store where they could try a restore themselves then that would suggest a hardware fault with the iPhone.
If you are out of warranty then it is correct that they would quote you an out of warranty service fee. From here it would be a matter of trying the steps above and if you have already tried then doing the service when you do have the cash.

Similar Messages

  • My iPhone 5 suddenly could not hop onto LTE anymore, after updating to IOS 6.1

    My iPhone 5 suddenly could not hop onto LTE anymore, after updating to IOS 6.1. I know there is LTE coverage at my house, since before I updated it, it could hop on to LTE just fine, in the same location. My Carrier is CSL Hong Kong. Does anyone have this problem? If so, does anyone have a answer to it?

    Hi AEEA-Family,
    I also did the update this morning and had the same problem also on Vodacom. The whole morning after the update I have No Signal, turning the phone on and of gives you signal for a couple of minutes then it drops again to no signal.
    I've just made the following changes on my Phone and all seems ok again.
    Here are the steps I took to resolve it on my phone.
    1. Go to "Settings" > "Carrier" > Turn off "Automatic", wait for list of Carriers and select "Vodacom-SA"
    2. Go to "Settings" > "General" > "Cellular" > Turn off "Enable LTE"
    3. Go to "Settings" > "General" > "Cellular" > "Cellular Data Networks". Then Change EVERY APN from lte.vodacom.za to internet
    After I made all those changes I did a hard restart of the phone and now all seems fine.
    I suspect the update this morning Enabled all Vodacom's LTE settings, yet Vodacom is not 100% LTE yet in our areas and this is causing the problem.
    Hope this helps other people.

  • Ive backed up my phone and restored it after updating the software and now a lot of my apps have waiting next to them and i cant access them from the interface

    Ive backed up my phone and restored it after updating the software and now a lot of my apps are greyed out and i cant access them via the phone interface
    I can only access them via the App store

    I did plug it into itunes and then backed it up to the cloud (im actually wondering if thats my problem)
    then restored it from the cloud. 
    Maybe I should restore it from the computer (when its plugged into itunes?)
    thanks sberman

  • AFTER UPDATING THE IOS 8 IN MY IPHONE THE PHONE MEMORY REDUCED TO 5.5 GB WHICH IS VERY LOW COMPARED TO 8GB

    AFTER UPDATING THE IOS 8 IN MY IPHONE THE PHONE MEMORY REDUCED TO 5.5 GB WHICH IS VERY LOW COMPARED TO 8GB. IWANT DEGRADE IT TO  IOS 7.1.2

    You must have upgraded the device directly through WIFi, restore your device via ITUNES and thats gonna work, it will reduce the space occupied by the new software installation

  • Doesn´t appear Personal Hotspot option after updating to iOS 8?

    Doesn´t appear Personal Hotspot option after updating to iOS 8?

    I Had the same challenge and all I did was switch off my iPad. Remove the SIM card from the tray. Switch the iPad back on again, reinsert the SIM card and bingo! The hotspot showed up again.

  • HT5622 i can't activate my iPhone 5 on iCloud after update to iOS 7.0.4 pleas help me

    i can't activate my iPhone 5 on iCloud after update to iOS 7.0.4 pleas help me

    rorof wrote:
    i can't activate my iPhone 5 on iCloud
    What does this mean?
    Settings iCloud and add your AppleID.

  • Why the Flash on my IPad 2 Camera does'nt work anymore After updating to IOS 7?, Why the Flash on my IPad 2 does'nt work anymore After updating to IOS 7?

    Why the Flash on my iPad 2 Camera doesnt work anymore After updating to IOS 7??

    No iPad has ever had a built-in flash for the camera.

  • HT4972 how to recover lost data in i  phone 4 without backup and how to activate i phone 4 without sim after update to ios 5.1.1

    how to recover lost data in i  phone 4 without backup and how to activate i phone 4 without sim after update to ios 5.1.1

    Not possible in both cases.

  • HT4528 I have no battery life in my iphone 5 since the iOS 7 upgrade.  I have completed all suggestions to help increase the battery power and now I can't use my phone more than 4 hours without the battery dying. What is the solution?

    I have no batter in my iphone 5 since upgrading to ios7.  I have talked with verizon techinical support and completed all suggestions to maintain the battery. And by the way, these suggestions are annoying and limit phone use as well as require you to close out each application after use, also turning off wi-fi and blue tooth. I don't need this phone if I can't use the features for which it was purchased! Any ideas?  Is there a fix coming soon for the battery? Can I return my iphone for my old droid?
    Help!

    Hi! I don't what's happened for your phone but, you can have more battery life with turning of Wifi, decries brightness, turn off location service and etc. also you shold use less Free+Much Ads apps becuase they use more battery than paid apps normaly.
    for more informations about battery normal life see here.
    I guess it's not a normal issue. so connect to Apple Care or wait for a better answer...
    Message was edited by: S. H. Mahmoudi Mehrizi

  • After updating the iOS from 4.2.1 to 4.3.3 the WLAN connection to a Win7 Hotspot (Connectify) is no longer working in the sence that UPnP Apps like PlugPlayer can connect to a Media Server (Twonky) on the Win7 PC in a stable way. What to do?

    I created a backup of the iPod in iTunes before updating to iOS 4.33 but after the update I can not restore. The backup is no longer shown in iTunes. I think iOS 4.3.3 has some differences in handling WLAN due to the Hot Spot capability for the iPone 4 which might cause these problems.
    Please help. The only use of my iPod touch is to remote control my media network. And exactly that is no longer working the way it was before the update!
    Best Regards,
    Gerd

    Now this has two direct effects - firstly it has increased the 3g usage for data and secondly it causes 'blips' with the ability to connect to previously working wifi connections.
    Landshark2007 wrote:
    We have identified that 4.2.1 in the iPhone 4 has WPA2 key length issues.
    Although I have seen posts about the problem WPA2 key length problem, I am using an iPhone 4 with iOS 4.2.1 and have no problems connecting to my WiFi that uses WPA2 AES with a key that is over 20 characters.
    Landshark2007 wrote:
    There is also one other school of thought that we have which is to do with the increased battery performance on the iPhones. It looks as though the iPhone drops WiFi when it goes to sleep (ie: when it is turned off in normal mode).
    An iPhone will maintain a WiFi connection when in sleep mode if it is connected to a power source.
    I have no doubt that many users are experiencing problems with their iPhones. I just feel lucky that I haven't experienced any big issues with mine.

  • Im having Iphone 3GS purchased from USA right now im in India so if i update my ios from 4 to 5 will my phone get locked..? if so can how to unloack that? i want to update the ios 5 please help

    im using iphone 3GS with ios 4.1;the iphone is purchased from USA and unlocked;I live in India so if I update to IOS 5 will my phone get locked? if so how to unlock in that case? please help

    No 3GS sold in the US was ever unlocked officially. Any attempts to update a hacked or un-officially unlocked iPhone will likely result in it being relocked to the original carrier.

  • Can i use siri in my iPod Touch 4g if the iOS 6 update is released

    if the iOS 6 update is available can i use siri on my iPod Touch 4g
    help so i will not buy the new iPod touch

    that was sad

  • My phone is not working after updating to ios 7

    24 hours ago i tried updating to ios 7 my screen went black and the apple picture just keeps blinking. i can not turn my phone off i can not turn it on. i let it die then i charged it and still the samething. i missed ine update before the ios 7 but i dont think it should take this long because of that.

    1)  Connect to iTunes on the computer you usually Sync with and Restore
    http://support.apple.com/kb/HT1414
    2)  If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808
    Note on Recovery Mode.
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download

  • HT4623 I use 3gs and after updating the IOS 6.1- the battery drains very fast and sometimes it hangs- pl.. help me to sort the problem.

    Pl. help me to figure out the resaon for this.

    Hi eyen83,
    Welcome to the Support Communities!
    If you're not able to make calls on your iPhone, try these troubleshooting steps first:
    iPhone: Troubleshooting issues making or receiving calls
    http://support.apple.com/kb/TS3406
    Follow the steps below to resolve this issue. Please test after each step.
    Toggle airplane mode: Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
    Check your phone settings:
    Check your Do Not Disturb settings: Tap Settings > Do Not Disturb.
    Check for any blocked phone numbers: Tap Settings > Phone > Blocked.
    See if Call Forwarding is turned on: Tap Settings > Phone > Call Forwarding.
    Ensure that your software is up to date:
    Check for a carrier settings update.
    Check for an iOS software update.
    Note: Some updates may require a Wi-Fi connection.
    If the iPhone has a SIM card, reseat the SIM card.
    If the iPhone 4 or iPhone 4s is on the Verizon network, dial *228 from the iPhone and select option 2 to update the Preferred Roaming List (PRL). The PRL determines the cellular towers the phone uses for cellular service, selecting those with the best signal strength.
    Reset the network settings: Tap Settings > General > Reset > Reset Network Settings.
    Try to make or receive calls in another location.
    Attempt to isolate to one network band:
    If you're having the issue on LTE, disable LTE, if possible, and try again.
    If you're having the issue on 3G/4G, disable 3G/4G, if possible, and try again.
    Contact the carrier to check the following:
    Your account is properly configured to use the specific iPhone that has the issue.
    There are no localized service outages.
    Your account doesn't have a billing-related block.
    Your calls don't have errors on the carrier system.
    Restore the phone as new.
    If the above steps don't resolve the issue, go to an Apple Retail Store, carrier, Apple Authorized Reseller, or contact AppleCare to send the phone in for service.
    Cheers,
    - Judy

  • How can I to resolve a write protected form after updating the form?

    The following error is displayed after updating a form “Any changes made to this form cannot be saved.”  These are the steps taken to update the form:
    1)      Move form to Workbench ES Resources.
    2)      Point Variables to new form
    3)      Invoke process
    The updated form is posted on Workspace.  LAN users can make changes and submit the form, but WAN users get the error above and cannot make any changes.
    Thanks,

    You need to know that "USB Key" technology may not be appropriate for a system disk.  Check out "wear leveling" on Wikipedia for a sobering discussion of the service life of solid-state drives.  Also read "solid-state drives" (Ibid.) for a detailed comparison with hard disk technology.
    --Gil

Maybe you are looking for

  • How can I add more than one submit button in a jsp without use of javascrip

    I want to add more than one submit button in a jsp without use of javascript

  • How do I link a drop down menu with product pictures?

    I wan to have  a product picture and then have a drop down menu to choose the color, so when I select the color in the drop down menu the product picture chages to its corresponding color, is this possible? Or is there an alternative way?

  • Lion Server is killing me!!

    We have a Mac Mini (new Nov. 2011) runnig Lion Sever 10.7.2 and I can't get it to work properly. I have done two instals including the original startup. I have an OD running, I have added users and groups. The Mac's and PC's in the office can access

  • N73 and parrot ls3200

    I have a problem with my n73 and my parrot ls3200. I had another phone some time ago and it was fine with the bluetooth device, but when i connect my nokia on the parrot's display i cant load the phonebook. I can speak or dial but only by numbers i c

  • Why GL balance  is splitting and displaying Bus. Area wise in F.01

    Why GL balance  is splitting and displaying Bus. Area wise in F.01, eventhough I have selected Bus. Area summarization 3 under output control tab.