Can't use my scanner after upgrading to OX Maverick

After upgrading my scanner is not working probably. I have an elder HP F388 all in one printer & scanner. I can scan files, but after saving the page it is blank. Does anyone has idea how to solve this problem ?

I have iphone 3 GS. I upgraded the software to ios 5 and the phone is now can't be accessed. All I can see is the Gray screen says Iphone. It ask me to set it up, choose your country, wifi, etc. when I did that, it always stop at the page where it says "Apple activation server is down, please try it again". Tried so many times but the same messages kept showing up. Connect it to Itunes, itunes said there is no sim card installed. I went to AT&T to get the new simcard and it still saying the same thing. don't know what's wrong with it.

Similar Messages

HT1386 I can't use my iphone after upgrading to IOS5

Can someone help? I can't use my iphone 3gs after upgrading to ios5.

I have iphone 3 GS. I upgraded the software to ios 5 and the phone is now can't be accessed. All I can see is the Gray screen says Iphone. It ask me to set it up, choose your country, wifi, etc. when I did that, it always stop at the page where it says "Apple activation server is down, please try it again". Tried so many times but the same messages kept showing up. Connect it to Itunes, itunes said there is no sim card installed. I went to AT&T to get the new simcard and it still saying the same thing. don't know what's wrong with it.

Can't use Airport Express after upgrading to Leopard

I use Airport Express for wireless printing and AirTunes via powered speakers/hifi. It was working very reliably until I upgraded to Leopard. Now, I am unable to use Airport Express. I get the blinking orange light, but when I scan with Airport Utility, Airport Express is not detected. Manual setup is grayed out, so I can't set it up at all. I am using Airport Utility Version 5.2.2 (522.3), and there does not seem to be any updates or patches to apply at the moment. I have tried on my iMac G5 and MacBook, with the same result on both computers.
I am also reading that many others are having problems with Airport Express after upgrading to Leopard, perhaps not with my specific hardware configuration, but this is very disappointing.
I am open to suggestions to try a few things to get it working, so any help is appreciated.
Message was edited by: a j

From the Mail menu, select "Preferences". Hit the Accounts tab. Select the Account. Under Account Information, reapply the user name and password.
Check with the provider if the account needs authentication. This is in the Advanced tab. Usually just a repeat of user name and password.

Can't use Home Sharing after upgrade to 4.3 for my IPAD

Hi,
I just upgrade my IPAD to 4.3 and ITunes to 10.2. But I can't use the Home Sharing Application. It shows "Home Sharing could not be activated because an error occurred (-3259)". Anyone knows about the detail on this error?
Thanks!
Ed

Welcome to the Apple Discussions!
If you glance down the list of topics in this Apple Discussions forum you will see a few threads that already cover this topic quite thoroughly. Have a read through those.
The main thread;
http://discussions.apple.com/thread.jspa?threadID=2776515
Dah•veed

Satellite Pro A200-16N: Can I use Recovery CD after upgrade to Vista

Hii!
Im thinking of upgrading to windows vista on my Satellite Pro A200-16N, and i've ran the windows vista upgrade checker from the microsoft website and it says my system will support windows vista so im ok on that.
The problem is, if my laptop were to break or something like that at some point, will my recovery CD's that was supplied from toshiba still work on the laptop with windows vista?
Will they return the laptop to windows xp or since my laptop has a different operating system will they not work?
Also...
Whats the deal with BIOS?:S
I dont understand!
If i were to upgrade to windows vista should i update my BIOS before or after upgrading to vista?
As i have to download the new drivers before upgrading yes?
Thanks!

Of course the Recovery CD will work.
The Recovery CD will set always the notebook back to the factory settings. This means that the whole HDD will be formatted and the Toshiba image will be installed.
> Whats the deal with BIOS? I dont understand!
> If i were to upgrade to windows vista should i update my BIOS before or after upgrading to vista?
In my knowledge this notebook was already delivered with Vista therefore you dont need to update the BIOS if you want to install Vista again.
Some A200 Satellite series needs a BIOS update if you want to use the XP.
In such case its advisable to update the BIOS to XP version firstly and then to install X OS.
Best regards

Cannon MP830 can't use the scanner function after upgrading to Mavericks.

I have an Cannon MP830 and now I can't use the scanner function after upgrading to Mavericks. Can someone help?

There is no ICA driver for this model so you won't be able to use Image Capture or Preview. But there is a TWAIN scanner driver and the supporting MP Navigator application available for 10.8 from Canon, so you could try installing these and see if you can scan again.

I am unable to update my album art since I commenced using match (and after upgrading to Yosemite). How can I 'unembed' old cover art and replace?

I am unable to update my album art on my iMac since I started using Match (and after upgrading to Yosemite 10.10.3). A message advises that it's not possible to removed old artwork if it's embedded. How can I 'unembed' old cover art and replace?

Normally artwork recovered with iTunes is stored as a separate artwork file and iTunes refers to that file to display artwork when you click on a track. However, if you then copy the file to another player the artwork file is left behind and the track will not display the artwork on the other player. To get around this it is possible to embed the artwork in the music file itself so it always travels with the file. Artwork can be embedded by you or files from third party sources may arrive with embedded artwork. iTunes apparently now won't replace artwork for such files. You can accomplish this by completely deleting artwork for a file or set of files in Get Info, then getting iTunes to fetch artwork which will then be set as a reference file rather than being embedded.
I use an old iTunes so unless you are using an ancient iTunes it won't help for me to give you great details. To erase artwork I simply get info on a series of files and check the box next to the artwork box without adding any artwork and close. To do it for single file I Get Info, go to the artwork display tab and click delete. Here's a Windows reference for a newer iTunes (but the "old Get Info" reference is for early iTunes 12 and no longer works with newer):I cannot delete embedded album artwork in iTunes 12

Can i use facetime if I upgrade from Mac Os 10.8 to lion?

Can someone tell me if it's possible to use face time on my mac book pro after this update? Alss Icloud?

can i use facetime if I upgrade from Mac Os 10.8 to lion?
Your question is backwards, we must assume that you want to upgrade from Lion to 10.8.

Contacts. Can't add new contacts after upgrading to Mtn Lion from Snow Leopard.

I can't add new contacts after upgrading from Snow Leopard to Mountain last week. I do not use iCloud. Any suggestions?

Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
First, empty the Trash.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Triple-click anywhere in the line below to select it, then drag or copy it — do not type — into the Terminal window:
find . $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 -o -acl $ 2> /dev/null | wc -l
Press return. The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
The output of this command, on a line directly below what you entered, will be a number such as "35." Please post it in a reply.

Can't print in PSE11 after upgrading to windows 8.1

I have just upgraded from Windows8 to 8.1 and now can't print in PSE11. For some reason can in PSE7

I can print from other programs but not PSE. I have updated the drivers. I have attached 3 screen shots with error messages.
Tracy Ferreira 2607 Woodruff Rd.
Suite E-126
Simpsonville, SC 29681(864)350-4724www.onthespotportraits.com
From: hatstead <[email protected]>
To: Tracy Ferreira <[email protected]>
Sent: Tuesday, March 10, 2015 1:58 PM
Subject: can't print in PSE11 after upgrading to windows 8.1
can't print in PSE11 after upgrading to windows 8.1
created by hatstead in Photoshop Elements - View the full discussionWhat happens when you try?Any error messages?Do you have the latest drivers for the printer? If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7274523#7274523 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7274523#7274523 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Photoshop Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

I can't update my apps after upgrade to iOS 6...?

I can't update my apps after upgrade to iOS 6

Are you sure you have a proper Internet connection? Make sure your iPod is connected to your computer, and you have an Internet connection.
Don't even get me started on the iPod Touch 5G, I actually own an iPod Touch 4G, and I've considered a lot about if I should get the new one. At first look, you might be sold by the features Apple has on their iPod Touch page. It has a taller screen that's a 4-inch Retina Display, has a much better camera with a flash, and comes with iOS 6 preinstalled with Siri. But the real breakthrough comes with the new connector. It's called Lighting, and it's much smaller. But if you have a dock connector that comes with some cars, and maybe a set of speakers or docking stations as alarm clocks, I encourage you not to get the new one. The usage of your old connectors requires a $30 adapter, which is a ridiculous price. And who knows how secure the adapters will be with your docking stations? I personally think Apple has crossed the line. If they are to put a new connector with their new products, they should ship with an adapter in the box, at least at first. This is why I strongly encourage you NOT to get the new 5th generation iPod Touch.
Sorry if I went a little off-topic there, but I wanted to get my point across. For your updating to iOS 6, I reccommend you check out other discussions in the support comunity, and see what other contributors have to say. Or go on Google and search your error messages, possibly someone might've already went through the same problem as you did. I really hope this helped!

Can I use iCloud storage to upgrade my 4s to ios6?

Can I use iCloud storage to upgrade my 4s to ios6?

Click here and see the bottom of the page.
(114313)

Can't to connect WiFi after upgrade to 10.7.1

My MBP can't connect to WiFi after upgrade the firmware from 10.7 to 10.7.1 today. How can I solve this problem ?

My MBP can't connect to WiFi after upgrade the firmware from 10.7 to 10.7.1 today. How can I solve this problem ?

What can I do about this: After upgrading to firefox 6, I get this error. TypeError: Components.classes[cid] is undefined???

What can I do about this:
After upgrading to firefox 6, I get this error.
When I click to open Firefox, A box open with the following error:
JAVASCRIPT Application
TypeError: Components.classes[cid] is undefined?
After I click close on the box, then Firefox will start. I really just want to get the error fixed so that when I want firefox open, I don't have to see this box anymore.

You need to figure out which add-on is causing that error and disable it until the developer of that add-on fixes it. There may be an error message about that in the Error Console, accessed through the Web Developer menu item or through {Ctrl + Shft + J}.
Also see this: <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

Can we use XSLT mapping after graphical Mapping

Hi,
Can we use XSLT mapping after graphical mapping?
My requirement is to generate two namespace attributes in the target output.
So first I want to generate a structure using graphical mapping and then want to use XSLT mapping only to generate the second namespace XSI (leaving the rest of the structure as it is). Is it possible?
<ns1:Test xmlns:ns1="wmdata.dwbi.interface" xsi:schemaLocation="wmdata.dwbi.interface w_interface_1.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
Please post some solution. (I will reward points)
Br,
Madan Agrawal

Hi Madan,
Can we use XSLT mapping after graphical mapping?
To me it seems feasible...
But to using the two mappings one after another you will have to use BPM .
Use transformation step for this to use the mapping and change in structure.
Regards,

Can't use my scanner after upgrading to OX Maverick

Similar Messages

Maybe you are looking for