Can't use my Trackpoint (Thinkpad SL300) to scroll in FF4 RC

Hi all,
today I updated to FF 4 RC 4. I'm not able to use my Trackpoint of my Lenovo Thinkpad SL300 to scroll the sites. That's very annoying!
Anybody got a idea?
EDIT: THe Trackpoint is working perfect with the rest of my programs and was working with FF 3.6.
Best Regards,
Katsche

Thank you xcycl & Katsche!
I also got the SL300 with the ALPS Trackpoint and combining your tweaks helped me solve this annoying problem.
In the file: C:\Program Files\Apoint2K\tp4table.dat
I added the below lines under 'pass 0 rules' at the top of the file:
; Firefox
*,*,firefox.exe,*,*,MozillaWindowClass,WheelVkey,0,9
The scrolling immediately started working again i.e. no restart of anything needed!
System: SL300 w. ALPS ThinkPad UltraNav, Windows 7 Ultimate 64-bit, Firefox 4.0 (final)

Similar Messages

  • Hi, how to use touch pad (thinkPad T61) to scroll pages up/down, left/right? do I need any drivers?

    Hi, how to use touch pad (thinkPad T61) to scroll pages up/down, left/right? do I need any drivers?

    Hi daneeo, and welcome to the Lenovo User Community!
    In the Control Panel for your Mouse there should be an UltraNav tab. Under that tab are all the settings for the touchpad. Check to make sure scrolling is enabled.
    If you do not see an UltraNav tab in the Mouse Control Panel, download and install the UltraNav driver and utility:
    http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-66898
    http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67226
    Hope this helps!
    I don't work for Lenovo. I'm a crazy volunteer!

  • How can I use a table as source for scrolling text

    Hi,
    I have a javascript scolling news on our portal page and anytime I need to update the news I have to update the portlet. Is there a way to use a database table to store the news and get it displayed automatically (as a scrolling text) after committing the transaction.
    Thanks,
    Leonard

    What do you mean by updating the portlet - page refresh?
    The nature of HTTP is that the client has to initiate the communication. As long as the browser doesn't submit a new request for the page, the content won't refresh.
    There are tricks, though that you may consider... such as placing an iframe on your portal page that "pings" the server and checks whether there's any change on the server side. Another option could be using an applet.

  • Can i use thinkpad X1 with 65W adapter?

    just got X1 and it came with 90W adapter, which is bulkier than 65 W.
    i think it came with 90W cuz of that rapid charge feature.
    i have 65 W adapter from my other thinkpads. can i use it rather than 90W on my X1?
    Other than that rapid charge feature, will i see any decrease in performance or other problems, such as it becoming
    a fire liability or something?

    Many wall charger are due voltage bu not all.  Look at the small writing on the wall charger and if it says 110 to 240 volts or a similar range then you only need the adopter to match the receptical.

  • Can I use 90w power adapter interchangeably with my 65w computer?

    I have two Thinkpads:
    1) T400 that has a 90w 20v power adapater
    2) T430S that has a 65w 20v power adapter
    Can I use the chargers interchangeably on the computers?  Are there any concerns, side effects?  My assumption is that using the 65w on the T400 will take longer to charge the battery.  More importantly, I would like to know if there will be any damage if I use the 90w charger on the T430S.
    Thanks.
    Solved!
    Go to Solution.

    You can interchange them without harming either ThinkPad. Note that there will be limitations with a 65W adapter:
    1. It will take longer to recharge the battery.
    2. It may not be powerful enough to power/recharge certain configurations, e.g. with i7 processors and/or discrete graphics processors.
    3. It may not be powerful enough to power/recharge certain types of usage, e.g. when watching a DVD while at the same time running HDD intensive applications.
    4. Certain features, e.g. RapidCharge on the T430s, won't work.
    Cheers... Dorian Hausman
    X1C2, TPT2, T430s, SL500, X61s, T60p, A21p, 770, 760ED... 5160, 5150... S360/30

  • Possible to use old company thinkpad?

    Hello, I'm new here to the forums. A company in the same building as I work was throwing away several old laptops, and a took 3 of them home. 
    I now have one T400, one T410 and one X201 lenovo thinkpad. I was owndering if it is possible for me to use these somehow? I have some problems/questions:
    1. All of them have no harddrive, so I guess I have to buy a harddrive for each laptop. How do I know what will fit? And do I need some kind of "carrier" to mount the harddrive? Could anyone give me some information on what I need to look for to get a hardrive that will work?
    2. It seems like all of the laptops are partly locked in BIOS, so I cannot change the boot order for instance, it says now 1. ATA HDD0, and 2. -USB HDD. Will this make it impossible for me to install windows on these?
    3. All of the laptops has been installed with windows when they were new, there is a genuine windows code under each laptop. Can I use this license somehow to legally install windows? How does that work? How do I download windows and install it on the laptops?
    Sorry, for newbie questions, I would be very greatful if someone could shed some light over this.
    thanks and best regards,

    1.  You can look up the hardware maintenance manuals for each model and see how to install drives, and look up the detailed specifications for each to see what the various components are.
    2.  If you can open the BIOS on each, that's partly a good sign.  But if they had supervisor passwords for making changes, you might be out of luck.  You'd have to contact the company and try to get the PWs from their records.  Or maybe their IT guy could unlock everything for you.
    3.  Transferability of licenses can be a problem.  If those are multi-user corporate licenses, for example, they may not activate if you try to do that.  If they were single-user licenses, you're probably OK if you try to install your own.  You can download iso images for Windows 7, for example, and it will install and activate according to the type specified on those certificates on the bottom. 
    You have to install the same version, e.g. 7 Pro or 7 Home, or Vista whatever, depending on what you have.  I did a fresh install of Win 7 Pro 64 on my Lenovo-purchased T440p from a downloaded iso and it activated without complaint on the CoA number underneath the battery. 
    Good luck.  Since the company is still there, I presume, you can at least ask for help if those devices are locked down. 

  • Can I use the third party software to backup my system?

     I have bought a new Thinkpad, and I just want to backup my system, but Lenovo Onekey recovery is not easy to use. I confess that it is very concise and powerful. But, I have to say some disadvantage, that is, It need to press the button and shut all computer. I want to backup my computer silently, and the process won't affect my other operation. I have searched a software- AOMEI Onekey Recovery, but it is the third party software, should I use it to backup my system. there seems to be more powerful in their page http://www.backup-utility.com/onekey-recovery.html, how should I determine? could anyone tell me the advantage or disadvantage?

    Can I use the new Time Capsule to backup my mid 2010 Macbook Pro?
    Yes, if you are asking about using Time Machine to backup the Mac.
    Also can I want to free up my hard disk, can I save my photos and files on the time capsule and later access through wifi?
    You are not thinking of deleting the photos and files on your Mac, are you?  If you do this, you will have no backups for those files.
    Another concern is that Time Machine backs up the changes on your Mac. At some point, Time Machine will automatically delete the photos and files from the Time Capsule.....you just don't know when this might occur.
    In other words, only delete files from your Mac that you can afford to lose.

  • Can't use paint brush tool at all

    i just installed a trial version of adobe photoshop cs4 and i can't use the paint brush tool at all - when i try to use it nothing happens
    i saw someone else with the same problem on this website http://forums.techguy.org/digital-photography-imaging/856315-photoshop-paintbrush-cant-use -help.html but it never got solved there

    ok thanks for the response
    i dont know if i'm updated to 11.0.1, how do i check that?
    i updated my video drivers
    i checked the list and it's not compatible - i use a NVIDIA quadro NVS 140M.  what do i do about that?
    turned off OpenGL, didn't make a difference
    I opened up the computer properties:
    Windows Vista Business
    Processor - Intel Core 2 Duo CPU  T8100 @ 2.10 GHz
    Memory - 4.00 GB Ram
    System type - 32 bit operating system
    graphic card - NVIDIA quadro NVS 140M
    also when i open photoshop it says " The monitor profile 'Lenovo Thinkpad LCD monitor' appears to be defective. Please re-run your monitor calibration software"
    i also checked the flow and the capacity and they are both at 100%
    appreciate the responses so far

  • Can not find driver for Thinkpad T500

    I can not find driver for Thinkpad T500? Could you please help me?
    Moderator edit: Matched Subject to content.

    Thanks to the folks at Kepware. I was able to get this working for CompactLogix L32E.
    Step 1: In NI OPC Server Create a new Channel. Channel Name can be whatever you want.
    Step 2: Device driver will be ControlLogix Ethernet.  You can also enable diagnostics if you want.
    Step 3: Network adapter. I used default setting.
    Step 4: Write only latest values.  Duty at 10. ( These are default settings and are recommended.)
    Step 5: Finish new Channel setup
    Step 6: Click on Icon to create new device
    Step 7: Device Name can be whatever you chose.
    Step 8: Select Device Model in this case CompactLogix 5300
    Step 9: Device ID For me was IP Address XXX.XXX.XXX.XXX,1,0    (Note the 1 directs path to backplane. The 0 to the slot where processor is)
    Step 9: Device timing.  Leave at defaults.
    Step 10: Auto demotion leave unchecked.
    Step 11: Leave at defaults Do not generate on startup Delete on create and allow subgroups
    Step 12: Port and watchdogs at default settings
    Step 13: Project options leave at default. (In my case I changed to short as that is what most of my tags were)
    Step 14: Create tagname from device.
    Step 14: Finish Device setup.
    You now have two options. 
    Option 1: Start creating tags as you need them. (This is what I did)
    Option 2: Right Click newly created device and select properities.  Then select database creation and click auto create.
    Go To Lookout  and create new driver. 
    Select OPC Client
    Server name will be from dropdown menu. National Instruments:NIOPCServers
    Click okay
    You should be done and smiling. 

  • Can I use older AC adaptor?

    I just bought the x201 that comes with a 65watt 20volt 3.25amp AC adaptor.
    I have old thinkpad AC adaptors, 90 watt, 20 volt, 4.5 amps, with the same connector. Can I use that as a spare?
    Thanks in advance.

    Hi and welcome to the forum!
    Sure, you can. 90W adapter will charge the battery more quickly too!
    Hope this helps.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • Can we use IF statement in PDF templates

    Hi,
    I developed a PDF template. I need to underline ang bold the records based on a specific condition. Can we use IF conditon in PDF templates. Please suggest.
    Thanks...

    Billy  Verreynne  wrote:
    The case syntax is a bit funny though as there's not a single condition evaluation (like a DECODE or case structs from some other languages).
    This is what I would expect a typical case struct to look like - evaluating a single condition:
    case <condition>
    when <value-1> then return <result-1>
    when <value-n> then return <result-n>
    else
    return <return-z>
    end
    ?:| You mean like this...?
    SQL> ed
    Wrote file afiedt.buf
      1  select empno, ename, deptno
      2        ,case deptno
      3           when 10 then 'This is Department 10'
      4           when 20 then 'And department 20'
      5           when 30 then 'And of course department 30'
      6         else
      7           'Blimey it is something else!'
      8         end as dept_desc
      9* from emp
    SQL> /
         EMPNO ENAME          DEPTNO DEPT_DESC
          7369 SMITH              20 And department 20
          7499 ALLEN              30 And of course department 30
          7521 WARD               30 And of course department 30
          7566 JONES              20 And department 20
          7654 MARTIN             30 And of course department 30
          7698 BLAKE              30 And of course department 30
          7782 CLARK              10 This is Department 10
          7788 SCOTT              20 And department 20
          7839 KING               10 This is Department 10
          7844 TURNER             30 And of course department 30
          7876 ADAMS              20 And department 20
          7900 JAMES              30 And of course department 30
          7902 FORD               20 And department 20
          7934 MILLER             10 This is Department 10
    14 rows selected.

  • In alv report can i use control break events? if no .whay?

    Hi all,
    in alv report can i use control break events? if no .whay?

    hi,
    you can use control break statements in ALV report.
    for example: if one PO is having more than one line item, that time you need to display PO only once.

  • HT1751 I need to uninstall and reinstall iTunes (it won't let me update). So, how do I copy or back up my iTunes library of over 1,500 songs? Can I use a Flash Drive to do so?

    I need to uninstall and reinstall iTunes (it won't let me update). I have IE 8 on Windows XP, and iTunes 10 something. In my Program files list I see iTunes and iTunes (2) and even iPod and iPod (2) where a tech had to back up and do this for me before. I'm just trying to fix it all. I keep getting the "The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a folder containing the installation package 'iTunes.msi' in the box below." I can even run a search and find the folder, but it gives me the same error message. I was planning on using the Microsoft Fix-It tool  to help uninstall then Reinstall iTunes. But I need to backup my library. So, how do I copy or back up my iTunes library of over 1,500 songs? Can I copy the folder to desktop or can I use a Flash Drive to backup my music? I don't want to do anything until I know for sure how I can backup my songs, and then reinstall them into iTunes. Thanks for any help.

    Ok, thanks that helps. I don't have an external hard drive though. What about backing up through 'the cloud'? I'm just wondering since my husband syncs his iPod to the PC through iTunes and he's worried that he will lose all the songs on his iPod if the library is lost from iTunes and he tries to 'sync' it up again. I'm not exactly sure how to  'copy the entire iTunes folder' either. I kinda suck at this unless I have step by step instructions, which I haven't found yet on iTunes help or other sources.
    The only way I know how to back anything up is by going back to a restore point, etc. (as stated before, we don't have an external hard drive.)
    Thanks for the info.

  • How can I use 2 Apple IDs in Itunes? I have 2 IOS Devices. They each have there own AppleID. What is the proper way to sync both of them to Itunes?

    How can I use 2 Apple IDs in Itunes? I have 2 IOS Devices. They each have there own AppleID. What is the proper way to sync both of them to Itunes? I wanted my teenager's AppleID to be different from mine so that she couldn't charge stuff to my AppleID, therefore I created me another one. Now when I go to Sync either device, it tells me that this IOS device can only be synced with one AppleID. Then I get a message to erase it, not going to do that, lol. If I logout as one ID and login as the other, will it still retain all synced information on the PC from the first IOS device? If I can just log in out of the AppleID, then I have no problem doing that as long as the synced apps, music, etc stays there for both. I am not trying to copy from one to the other, just want to make sure I have a backup for the UhOh times. If logging in and out on the same PC of multiple AppleIDs is acceptible then I need to be able to authorize the PC for both devices. Thanks for the help. I am new to the iOS world.

    "Method Three
    Create a separate iTunes library for each device. Note:It is important that you make a new iTunes Library file. Do not justmake a copy of your existing iTunes Library file. If iTunes is open,quit it.
    This one may work. I searched and searched on the website for something like this, I guess I just didn't search correctly, lol. I will give this a try later. My daughter is not be back for a few weekends, therefore I will have to try the Method 3 when she comes back for the weekend again. "
    I forgot to mention that she has a PC at her house that she also syncs to. Would this cause a problem. I am already getting that pop up saying that the iPod is synced to another library (even though she is signed in with her Apple ID to iTunes) and gives the pop up to Cancel, Erase & Sync, or Transfer Purchases. My question arose because she clicked on "Erase & Sync" by mistake when she plugged the iPod to her PC the first time. When the iPod was purchased and setup, it was synced to my PC first. When she went home, she hooked it up to her PC and then she erased it by accident. I was able to restore all the missing stuff yesterday using my PC. However, even after doing that it still told me the next time I hooked it up last night that the iPod was currently synced with a different library. Hopefully, you can help me understand all this. She wants to sync her iPod and also backup her iPod at both places. Both PCs have been authorised. Thanks

  • Can I Use iTunes Store without Storing Bank Accounts, etc, in my Profile?

    Hi
    Today a fraudulent charge of $89.99 appeared on my iTunes account. This suggests that a hacker has obtained my password, and hence access to all information in my iTunes account, including credit card or Paypal account information. I can deal with having to claim refunds for fraudulent iTunes purchases, but I cannot afford to risk ID Theft, or to have my back account information in the possession of hackers.
    (1) Is it possible to maintain an iTunes account that does not store bank accounts, and ideally stores no personal information other than my email address?
    (2) If I can do this, I assume I'd then have to enter that information for each purchase. Will this information be expunged once the ourchase is complete? Or would it remain on the system in some form, accessible to hackers?
    (3) If (1) is not possible, how do I cancel my iTunes account? There does not seem to be such an option on the iTunes Account Management screens.
    Thanks,
    Chris

    You can remove your credit card from your account. Go into the account, click "Edit payment information" and you will see the option under credit card to click "None."
    For purchasing, you can either enter the card info per transaction, or you can start using iTunes gift cards which are readily available.

Maybe you are looking for