Can't use Notes/Can't find some notes

I went to look for a note and all of a sudden it wasn't there any more. I don't think I deleted it and as far as I can remember it is only one that is missing. I have multiple email accounts synched to notes except I realized that one of them isn't synched. It is possible that the note came from that account but I don't know how to turn notes back on for that account. I went on through settings and that email account didn't have that option. The email is a Hotmail account. I tried logging in on to that email on my computer but I couldn't even find the notes there.
Any help please?

I looked at that and All Notes is what I'm in. For the accounts listed Hotmail isn't listed anymore and I can't add it back on through settings.

Similar Messages

I can't find some of the addons I installed as they are not on the long press menu for Firefox for Android

This is about addons. I have read the support article on finding and mana addons and it didn't solve my problem. I can't find some of the addons I installed although they appear on the list of addons installed on the tools addons page. Some are on the long press menu but those I can't find include bluhell, tap tap wrap, tap translate and add block edge.

They appear on the Add-ons list as being enabled, but there doesn't seem to be any user interface to actually use them?
I haven't experimented with those particular extensions. If you don't see what the screen shots on the add-ons site show, usually there is a support link for the extension, or you may find usage tips in the reviews from other users who ran into the same problem.

I can't find some installed apps after upgraded to iOS6.0.1 by sync from iTunes

I can't find some of installed apps after upgraded to iOS6.0.1 by sync fom iTunes. when i try to download them from app store again, it shows OPEN button only but not INSTALL button. is there anyone got this problem too?
I use iPhone 4s.

thanks for ur reply, i tried restart my phone, the most used apps back now. anyway, thank u!
sberman wrote:
If you know where the app is (in a folder, for example), go to that folder and find the app there.
Maybe you tried holding the app down in the search screen. I didn't say clearly you have to go to the app eherever it is, but not in the search screen.

LR can't find some of my photos

LR can't find some of my photos even though their location has not changed. When I tell it to locate the file and I find it, LR tells me that file number is associated with another photo.

I am assuming no changes have been made to alter the image, in that this is an original image that you have not worked on in lightroom before.
Find the file in your OS's file manager,
rename the file
In lightroom resync that folder.
(Note: If you have a bunch of images that you have retouched in LR and did not save the metadata,
place the renamed image in a sub folder to a folder that LR has access to or
in LR select all of the images and hit ctrl-s or
import that renamed image)
That image should now be available.

I can't find some apps in iTunes store

I can't find some apps in iTunes app store when searching for those apps on an iPad. I can find them when searching on an iPhone. Why is this happening?

These are user-to-user forums, you are not talking to Apple here. If you can't find the app in the store then it may have been removed either via the app developer or by Apple - have you not got a copy of it somewhere e.g. on your computer or on a backup ?

Where can i find some study resources about Workers?

Where can i find some study resources about Workers?
Thanks!

Thibault Imbert has packed some demos. You can get them using one of these links:
http://labsdownload.adobe.com/pub/labs/flashplatformruntimes/flashplayer11-4/flashplayer11 -4_p1_ex_concurrency.zip
https://dl.dropbox.com/u/7009356/ConcurrencyExamples.zip (mirror)
For more information read these blog posts:
http://www.bytearray.org/?p=4516 Introducing Flash Player 11.4/AIR 3.4 beta!
http://www.bytearray.org/?p=4423 A sneak peek: Concurrency with ActionScript Workers

Hi, I migrated from PC to Mac, but I can't find some files I had in the PC, this files were invisible but just before migrating I switched off the "hidden" option, ¿Does this files migrated as hidden files or they didn't migrated?

Hi, I migrated from PC to Mac, but I can't find some files I had in the PC, this files were invisible because I had them as hidden but just before migrating I switched off the "hidden" option, ¿Does this files migrated as hidden files or they didn't migrated?

If the filename starts with a dot (.thisfile), then it will be hidden on the Mac.
You can use a 3rd party App, such as EasyFind to search for the file on your Mac, and then re-name (remove the dot)

I can't find some objects in BC

Hello all,
I am activating bc objects for Production Planning & and Controlling, but I can't find some objects. There are some infosources that haven't got any 'data flow before' . How can I map these objects?
For example, how does 2LIS_04_S280 infosource work? why can't I find its transfer rules nor its datasource in bc?
I need some light about this issue. Thank you very much. Points will be assigned
C.

hi
2LIS_04_S280 & S281 are obsolete since R/3 Release 4.0B .
Use 2LIS_04_P_MATNR & 2LIS_04_ARBPL respectively .
S280 = 2LIS_04_P_MATNR
S282 = 2LIS_04_P_COMP
S284 = 2LIS_04_P_PEMATNR
S285 = 2LIS_04_P_PECOMP.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/6c/6111846c3911d3b6df0000e8359890/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/6c/61117e6c3911d3b6df0000e8359890/frameset.htm
For more help.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c1/37544e449a11d188fe0000e8322f96/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/28/500b3c56488e6be10000000a114084/frameset.htm
regards
zubair

Where can I find some appications' source code written by swing

hello, everyone
I have studied swing for one month, and I have some basic idea of the swing.
but I want to learn more about the swing. can anybody tell me how can I improve
myself now or show me where can I find some appications' source code written
by swing in the internet.
thank you very much!
your help is very appreciated!

Check this tutorial:
http://java.sun.com/docs/books/tutorial/uiswing/index.html
It explains all the Swing components with many code samples.
HTH
stefan

Where can I find some Dreamweaver templates?

I'm want to redo my website and need a new look. Where can I find some nice Dreamweaver templates?

See F1 Help -- Working with DW Templates
http://www.smartwebby.com/web_site_design/dreamweaver_template.asp#1
Templates are a convenient site management tool. A DWTemplate is a common layout file from which you spawn your site pages.
Editable Regions are for content that will change from page to page.
Everything outside Editable Regions is common to all site pages & only editable from within the main template.dwt file.
Nancy O.

Where can i find some pixel bender 3d for flash tutorials ?

where can i find some pixel bender 3d for flash tutorials ? anyone !?

Hi,
there is a Java3D Tutorial available at java.sun.com. You need to install the Java3D package in order to develop 3D with Java. This can be downloaded from java.sun.com as well.
Have fun!
Mitsch

HT1918 i want to change the country from USA to EGYPT in the itunes but i get a message saying, u have remaining balance which is 0.44 USD, how can i find some thing for 0.44 USD to spend this sum so i can switch my account to the right store??

i want to change the country from USA to EGYPT in the itunes but i get a message saying, u have remaining balance which is 0.44 USD, how can i find some thing for 0.44 USD to spend this sum so i can switch my account to the right store??

Buy something for more than the balance and charge the remainder to a credit card, or write Apple and ask them to keep the balance.
iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html > Get iTunes support via Express Lane > iTunes > iTunes Store

I can't find some of my purchased music

I can only find some of my purchased music. I bought an album and I only see one song left from it, and it was a whole album when I downloaded it. Also I bought a lot of Michael Jackson music, and when I bring up my purchased music, I don't see any of his music, or of the album music mentioned above, except for one song. How do I get that music to display too.

You may be able to redownload your iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
BTW, did you sync to the laptop before? Yu can only sync to one iTunes library. If you sync to to another library the iPod will be eerased and it contents replace with what is in the iTunes library on the computer.

ITunes can't find some songs - can anybody help?

(I'm reposting this question because the thread it was in was marked as "Answered" - but it wasn't answered, and nobody was replying.)
My iTunes library was on an external drive, and it was working just fine. Then there were some problems with the external drive, so I bought a new external drive and loaded the entire iTunes library onto it. (I followed Apple's instructions for doing this.)
I set preferences to use the iTunes folder on the new external drive. When I launched iTunes, all the music appears, as do all of the playlists that I created. It looked like everything was OK with the new hard drive - until I looked more closely and saw exclamation points next to some of the songs in my music library.
Here is the problem: iTunes says it "can't find" the locations of about 5% of the songs in my library (that's about 300 songs). Those are the songs with the exclamation points next to them. When I try to play them, iTunes says it can't find the file.
If I click on one of the "lost" songs to try to play it, iTunes presents a dialog box that lets me navigate my way to that song to show iTunes where it is, and then iTunes can play it. Theoretically this is a solution, but I don't want to do that for about 300 songs - it would take hours.
All of the "lost" songs are in my iTunes music folder. There doesn't seem to be anything unusual or unique about the lost songs.
I searched Apple's support pages for help on this, and I searched this forum (iTunes for Mac), and I couldn't find an answer. It looks like a fairly common problem - I see other posts with similar problems, but I haven't seen a solution yet.
Any ideas what causes this? And (more importantly) any suggestions for how to get iTunes to recognize the location of those songs with the exclamation points?

The suggestions that I received didn't solve my problem, but they did result in a duplication of my entire library - and I didn't relish the thought of deleting 6100 duplicate songs, one-by-one. I finally solved both problems by rebuilding the iTunes library. It was pretty easy to do, and it cleaned things up quite well.
There is an Apple tech support document that describes how to do this, but it's a bit hard to find. If you search for "rebuild iTunes library", you won't find it. You have to search for "re-create iTunes library" with a hyphen stuck in the middle of the word recreate. Then you will find this link...
http://support.apple.com/kb/HT1451
...which guides you step-by-step through the process of rebuilding the iTunes library. This got rid of duplicates, it re-established broken links, and it found a few songs that for some reason had not been in the previous library.

ITunes Can't find Some Songs?

Hey guys - I had my Ext HD damaged and had to get a new one. I had my library and everything else important backed up (I keep all files on an ext HD to keep my computer HD free of crap). I didn't lose anything. When I opened iTunes and directed it to my new location it failed to find about 1/3 of my library. It looks like all of my data including ratings, play counts, etc are all there. The only issue is when I get to a song it can't find I have to manually direct it back to that file. What confuses me is it had no problem with songs in the same album, so they are in the same file. It seems very arbitrary as to what it did and did not locate.
My question is, I can go through each song individually and point iTunes towards it. There has to be a way to do this in bulk. Anyone have an idea? There seems to be no problem with the library, files, folders, etc.
Thanks for the help.

I had the exact same problem. My iTunes library was on an external drive. It was working just fine. Then there were some problems with the external drive, so I got a new external drive and loaded the entire iTunes library onto it.
I used iTunes preferences to direct it to the iTunes folder on the new external drive. Then I pressed the Option key while starting up iTunes to also redirect it to the iTunes folder on the external because (for reasons I can't fathom) setting the folder location in preferences wasn't enough.
I have the same problem as zblom (original poster) - but only with about 5% of the songs in my library. About 95% of my songs have no problem. But there's an exclamation point next to about 5% of them, and when I try to play them, iTunes says it can't find the file. I've navigated my way to a few of the songs and then iTunes can find it. But I don't want to do that for about 300 songs - that would take hours.
Any ideas what causes this? And (more importantly) any suggestions for how to get iTunes to recognize the location of those songs with the exclamation points?

Where can i find some real-life flex applications?

Hi,
i am trying to find some real-life flex applications.
previously, there is a list of application in :http://flex.org/showcase/
but, now (after site reconstruction?), the list is gone.
anyone have that list of applications?
or could you please give me some list of flex application??
thank you.

Hi all,
thank you for your advices...
actually, i am assigned a task to do a preliminary study about whether Flex is a good candidate for revamp my
company's core application (about healthcare -- that serve many patients a year)..
currently, the application is written in powerbuilder, which consist of the following functions (in simplest and in technical term):
1. draw picture and show image (for diagnosis )
2. create report dynamically and print report (PB datawindow)
3. integrate with OS (mainly win32 dll / C library...etc) for third party equipment (e.g. thermo printer, credit card / debit card reader, medical
    equipments...etc)
4. integrate with other systems (through HTTP, FTP or web service)
5. barcode generation ....1D, 2D or even QR code..etc
i have created a sample application, with flex builder 3, to evaluate:
1. draw picture and show image
     ==> simple line/ dot / polygon, is there any good and common library for drawing?
2. create report dynamically and print report (PB datawindow)
    ==> use jasperreport (in server side) and jasrereport flash viewer (code modification required to add print and paging function)
            to show report and print report.... is there a good reporting solution for flex?
   ==> dynamic report generation seem difficult...need to build from scratch?
3. integrate with OS (mainly win32 dll / C library...etc) for third party equipment (e.g. thermo printer, credit card / debit card reader...etc)
   ==> seems impossible with flex due to security issue. require activex or java applet and javascript with externalinterface..
4. integrate with other system (through HTTP, FTP or web service)
   ==> HTTP OK (with seems no buildin HTTP basic authentication support, require to add header by code)
   ==> web service OK (but no buildin ws-security X.509, SAML supported, [user name token profile support by using 3rd library])
5. barcode generation
   ==> not test
i haven't test all other functionality yet.... but after playing flex for a while,
i am not confident that i should go ahead with flex for the application revamp...
it seems flex is strong in UI...but weak for other functionality...especially integration with other systems....
anybody have some reference materials / opinion for me that can convince me to invest more effort about evaluation of flex?
thank you.

Can't use Notes/Can't find some notes

Similar Messages

Maybe you are looking for