Can't use phc-intel with 3.9.3

I installed the AUR package for phc-intel, changed the VIDS in /etc/phc-intel.conf and rebooted.
Running /usr/bin/phc-intel start doesn't have any effect (status still shows as "Stopped")
I'm running a custom Zen kernel, acpi-cpufreq is built as a module.
cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz
stepping : 13
microcode : 0xa3
cpu MHz : 1994.975
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm dtherm tpr_shadow vnmi flexpriority
bogomips : 3991.19
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz
stepping : 13
microcode : 0xa3
cpu MHz : 1994.975
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm dtherm tpr_shadow vnmi flexpriority
bogomips : 3991.19
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
lsmod
Module Size Used by
mperf 1272 0
iwldvm 179033 0
led_class 3515 1 iwldvm
iwlwifi 86589 1 iwldvm
/sys/devices/system/cpu/cpu0/cpufreq/scaling_driver
zsh: no such file or directory: /sys/devices/system/cpu/cpu0/cpufreq/scaling_driver
/sys/devices/system/cpu/cpu0/cpufreq/phc_version
zsh: no such file or directory: /sys/devices/system/cpu/cpu0/cpufreq/phc_version
modprobe phc-intel
modprobe: ERROR: could not insert 'phc_intel': No such device
modprobe acpi-cpufreq
modprobe: ERROR: could not insert 'phc_intel': No such device
modprobe: ERROR: could not insert 'acpi_cpufreq': No such device
modprobe: ERROR: Error running install command for acpi_cpufreq
modprobe: ERROR: could not insert 'acpi_cpufreq': Operation not permitted
Anything I'm missing? Thanks!
phc-intel setup done before the reboot
[edit to update the kernel version. all error messages remain the same]
Last edited by el mariachi (2013-05-23 10:27:42)

yes

Similar Messages

Can I use aperture 3 with 2.4 ghz intel core 2 duo?

Can I use Aperture 3 with an imac with a 2.4 ghz intel core duo processor?

Yes. I still use a 2006 2.33 GHz C2D MBP with 3 GB RAM as a backup box, and it "works." Be aware that iMac is underpowered overall for Aperture usage, but some folks do OK with it (4 GB RAM minimum). Like DLS said, more RAM is better than less RAM. 8 GB RAM is generally appropriate, but I can even overload the 8 GB in my 2011 MBP when running an aggressive Aperture/Photoshop workflow.
Also the stronger the GPU the better, and an SSD is far far preferable to a hard drive for boot, because any page outs go to SSD instead of to the horribly slow 2.5" laptop drive.
HTH
-Allen

Can I use USB 3 with my 2.8Ghz Quad-core

I have an early 2008, 2.8 GHz Quad-Core Intel Xeon Mac Pro, can I use USB3 Devices with it?

Yes, they are all backward-compatible.
If you wnat USB-3 speed, you would need a PCIe card.

Can T420 use 3 display with out a dock.

Can T420 use 3 displays with out a dock.
One on a laptop display, one via VGA port and another one via DISPLAY port.
I use T420 4178-BYT with Intel HD Graphic 3000 (no nvidia).

You have to re-activate it with the original sim card, or one from the same carrier it's locked to (unless it's not locked, then any GSM sim card will do). The sim card itself doesn't have to be activated, it just has to be the correct one and be inserted. After that you can use it as an iPod Touch. See http://support.apple.com/kb/HT3406.

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.

How can I use an iPad with two itunes accounts?

How can I use an iPad with two itunes accounts?
Hi there
My partner has a works iPad, which has her works Apps on (ones that are specifically made by her company and are NOT available in the App store).
What I want to be able to do is to ALSO have my itunes account on there so that I can put all the apps I have purchased previously from my iPhone on it.
This is so I can put on VLC player (thats already in my itunes account) so I can add videos to the iPad.
How do I do this please?
I tried it before by connecting it to my mac, but it wiped everything off the iPad completely and also deleted the data settings for using 3G.
So I want to avoid this happening again the future as it had to be sent back to her head office to be sorted again.
Any advise please?
Thanks

You can't. The iPad is desgined to be a 'one user' device and only really works with one apple ID at a time.
The only way would be if she, at work and with her work apple id, downloaded your apps (repurchasing them of course).
It's not meant to be a multiple user/multiple ID device.

How can i use text expander with the new Mavericks,

how can i use text expander with the new Mavericks,

I regret upgrading to mavericks for the same reason
ftamez wrote:
how can i use text expander with the new Mavericks,
Now I have been searching - and you have to buy an app and it will cost you $34.99 (what a rip off)

HT202213 can i use home sharing with my wife who has a different apple id

Can I use home sharing with my wife who has a different apple id so we dont buy the same songs twice

Wow, great question mhaney73. There's got to be a way. I have that problem as well, double songs all over the place.

HT4363 Can I use home sharing with FaceTime?

Can I use home sharing with FaceTime

Winston,
Thanks for the promt reply. But my problem was that I did not know how to use the air play. I looked around and figured it out.
thanks,

Can I use my macbook with a mac mini

can I use my macbook with a mac mini

You mean can you network the two Macs?
What OS X version are you running on both of your Macs?

How can i use "icloud backup" with ios 4.2.1?

How can i use "icloud backup" with ios 4.2.1? I tried to update my ihpone 3G wih the newest IOs. Seems not to be possible.

You cannot.
It requires ios 5.
Your iphone can only go to 4.2.1

I just downloaded ios7 now i can only use the phone with the speaker, how can i fix this?

I just downloaded ios7 now i can only use the phone with speaker, how can i fix this?

x

How can I use the NI PXI-6508 with Lab View 7? what are the first steps to get started??How can I use the channels with lab view 7????

I have a 8 slot PXI system with 2 NI PXI 6508 and 1 DMM 4070 in it. I want to get started with programming the digital I/O cards (6508)! How can I use this cards with LabView 7?what is the best way to get started, or where can I get examples showing how to use the several channels?
Thanks!
Philipp

Philipp,
The best way to get started is to decide if you want to use traditional NI-DAQ or NI-DAQmx. Recently we released NI-DAQ 7.1 which provides NI-DAQmx support for the PXI-6508. In my opinion, NI-DAQmx is more efficient and much easier to use.
To get started with examples, simply launch LabVIEW and go to Help>>Find Examples. Then expand Hardware Input and Output>>DAQmx and select the appropriate digital group for your application. This should help get you started.
Please repost if you need addition assistance. Good luck with your application!

I had Leopard on may Mac. I upgraded to Mountain Lion using Snow Leopard. I can't use my video with Mountain Lion. Can I load Snow Leopard on an external hard drive so I can use it with my camera?

I had Leopard on may Mac. I upgraded to Mountain Lion using Snow Leopard. I can't use my video with Mountain Lion. Can I load Snow Leopard on an external hard drive so I can use it with my camera?

First, you cannot do this if you have a Boot Camp partition.
Second: Create a new partition.
1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.
Third: Install Snow Leopard.
Boot from your Snow Leopard DVD. Follow instructions for installation being sure that before you actually install Snow Leopard you have selected the new partition as your target destination.
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple logo
appears.
5. Wait for installer to finish loading.

Can I use my iPad with airport extreme to retrieve files from a USB connected hard drive?

Can I use my iPad with airport extreme to retrieve files from a USB connected hard drive?

Yes, I believe so. Please check out the NetPortal app. I don't have an iPad, but I use it on my iPod Touch to access files on my Time Capsule. It is available from the iTunes App Store.

Can't use phc-intel with 3.9.3

Similar Messages

Maybe you are looking for