Can't use third-party earphones

Does anyone have problems using a third-party earphone? I tried using my Bose earphones and Sony earphones which are supposed to work with the I-Phone, but no luck. The earphones that came with the I-Phone works.

you most likely need the adapter.
here is a link: http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=3DB 4EB78&fnode=home/shopiphone/iphone_accessories/cablesdocks&nplm=TN546LL/A
there is apples to but there's is $20: http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=B19 14140&fnode=home/shopiphone/iphone_accessories/cablesdocks&nplm=MA854LL/A
Message was edited by: edden amber

Similar Messages

Can I use third party DAQ boards with Labview real time?

I have an Adlink DAQ 2010 card that I curently use with labview. Will this card also work with Labview real time? What requironments are there for 3rd party cards to work with Labview real time?
Thanks!

Hello George,
Here is a great link for you to take a look at: Can I Use a Third-Party Device with LabVIEW RT?
Have a great day,
NathanT

Can I use third party Windows CE based touch panel to control my system?

I want to use a WindowsCE based touch panel to control my system by connecting a CompactDAQ to it through USB and installing the.exe file built from LabVIEW and installing the CompactDAQ drivers.
It sounds doable, but I don't know if WindowsCE does support those .exe files or the hardware drivers or if there is something I can do to make it support them. I hope anyone has an idea about this and can help me.
Thank you
Solved!
Go to Solution.

I found the following statement at :
LabVIEW Touch Panel Module Getting Started Guide
http://zone.ni.com/devzone/cda/tut/p/id/5868
"The deployment procedures discussed previously for NI touch panels are not guaranteed to work for third party touch panels. If the use of a third-party touch panel is desired it must met certain requirements in order for the LabVIEW touch panel module to properly work with it.
The LabVIEW Touch Panel module only officially supports the two operating systems and two processors that the NI touch panel devices are based on. The operating systems supported are Windows CE 4.2/5.0 and Windows XP Embedded, while the supported processors include the StrongARM, XScale, and x86.
Another consideration when using a third-party touch panel is that a LabVIEW Touch Panel Deployment License must be purchased for each deployment of an application developed with the LabVIEW Touch Panel module.
In addition, specific Microsoft tools must be installed on the touch panel target in order for the LabVIEW Touch Panel application to function as expected. The following Microsoft eMbedded Visual Tools need to be installed:
Microsoft eMbedded Visual C++ 4.0
Microsoft eMbedded Visual C++ SP 4 or later
SDK for Windows Mobile 2003-based Pocket PCs
Reference the Where Can I Find the Microsoft Tools I Need for the LabVIEW Touch Panel Module? knowledge base article to find links to the current Microsoft download sites."
Kareem W.
National Instruments
Web Product Manager

Can I use third party web services that communicate via http-post with webui builder?

Hi,
I have 5 computers (services) that are controlled via http-post. 3 of these services are implemented as labview webservices, 1 is labview socket (with python http-wrapper) and the last one is implemented with c# (lighttpd + cgi).
Can I use webui builder to controll all of them? Or, what is the simplest change so I can use webui builder?
What I would like to do, is to change the current javascript-UI to labview-webui. For the interfaces implemented with labview webservices, this is not a problem. For non-labview services, I don't know if it is even possible.
br,
Juha

To add to Mike's answer, the only caveat is that the server needs an appropriate clientaccesspolicy.xml file at the root level (http://yourserver/clientaccesspolicy.xml), or a completely open crossdomain.xml file, for the editor and built apps to be able to communicate with it. There's a help topic which explains this in the context of LV web services, but it's true for Web UI Builder to be able to communicate with arbitrary web servers also.
Since it sounds like you control all the web servers in question, it shouldn't be too difficult to get this file in place, though.

How can i telnet or get access to other LAN members in LAN without using third party software?

I have admin access to the main router in our LAN, so how can i telnet or get access to other LAN members in LAN without using third party software?
its linksys3500 router and i login as admin using the gateway address in address bar..
i want to access the c drive of my colleague in same subnet in same office and i know his ip address.but he not configured telnet accept request.so without it how can i open his telnet port and access him

I think you are using the wrong terminology. You can browse the hidden share of any pc if you know the ip and have a valid user account on the pc by typing in the following \\computername\c$ or \\ipaddress\c$ . It should prompt you for a user account. You may have to allow this through the windows firewall (or disable it completely).

I have admin access to the main router in our LAN, so how can i telnet or get access to other LAN members in LAN without using third party software?

I have admin access to the main router in our LAN, so how can i telnet or get access to other LAN members in LAN without using third party software?
its linksys3500 router and i login as admin using the gateway address in address bar..
i want to access the c drive of my colleague in same subnet in same office and i know his ip address.but he not configured telnet accept request.so without it how can i open his telnet port and access him

Duplicate post.

How to do XMLDSig using third-party JCA providers?

Hi all,
Can anyone please let me know how to do XMLDSig using third-party JCA providers? The Sun XMLDsig documentation says that "A JSR 105 implementation SHOULD use underlying JCA engine classes, such as java.security.Signature and java.security.MessageDigest to perform cryptographic operations", but it doesn't say how to define the JCA provider programmatically. I don't want to change the Providers order in the security.properties file.
Do we need to make any changes in the JCA provider classes to work with XMLDSig and XML encrypt?
I'd appreciate your help.
Joe

How to identify whether the third party app has registered URL scheme or not. I also send a request mail to the third party app developers regarding URL scheme, but there is no reply from them.

Convert word document in PDF,e pub,by using third party dll in Sharepoint designer workflow 2013?

Hi,
I want to convert word document to PDF, EPub, by using third party (.dll).
In SharePoint designer workflow in 2013.
So that I have question, Can we Install third party (.dll) in SharePoint workflow Designer for conversion?
Means I have created one simple application conversion of word to e Pub, PDF, Image by using (Spire.doc dll) in Visual Studio.
So this same conversion I want to work in SharePoint designer workflows?
So anybody has any solution then please provide me.
Thanks,
Samadhan

it might be worth looking at these CodePlex steps, that plug directly into the Word Automation Services.
http://sp2010wordautomation.codeplex.com/
It'll provide you with a configurable step like the below that should help you achieve your aims
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

How to use Third Party DLL in Adobe Illustrator Plug In

Hi Everyone,
I want to design plug-in for Adobe illustrator CS6(64 bit). As first step I am referring sample plug ins from ../SDK/SampleCode. I am not getting how to use third party DLL in plug in.
Please let me know how to refer C# DLL in illustrator plug in.
Thanks in advance.

There's no C# API for the Illustrator SDK, so your plugin must be C++ at the very least. That said, you can probably write a bridge if you need to call out to a C# library/DLL.

Can you specify third party JMS Provider in Weblogic appserver configuration

          Can you specify third party JMS Provider in Weblogic appserver configuration ???
          Only place i know of is that you can specify third party JMS Provider in MDB configuraion.
          DOES Weblogic has some kind of configuration files where you specify JMS Provider
          info (Like you can do that in JBOSS)


You can also specify a third-party JMS provider using the Messaging Bridge,
          which transfers messages from one queue or topic to another.
          And in general, inside WLS you can use any JMS provider you wish anywhere
          that you can also use WLS JMS. In an upcoming release, there will also be
          some support to make foreign JMS providers a little easier to configure.
          But why would you want to use another JMS provider anyway? ;-)
          greg
          "Neeru Munjal" <[email protected]> wrote in message
          news:[email protected]..
          >
          > Can you specify third party JMS Provider in Weblogic appserver
          configuration ???
          >
          > Only place i know of is that you can specify third party JMS Provider in
          MDB configuraion.
          > DOES Weblogic has some kind of configuration files where you specify JMS
          Provider
          > info (Like you can do that in JBOSS)

Using third party jars with Oracle Business Rules

Hi
I am working on Oracle AS 10g release 2.
We are using Oracle Business Rules in integration with Oracle BPEL.
While using third party jars however, Oracle Business Rules end is facing errors.
Error during unmarshallingProvider com.sun.xml.bind.ContextFactory_1_0_1 not found
oracle.classloader.util.AnnotatedClassNotFoundException:
Missing class: com.sun.xml.bind.ContextFactory_1_0_1
Dependent class: javax.xml.bind.ContextFinder
Loader: oracle.xml:10.1.0_2
Code-Source: /D:/oracleasr3/lib/xml.jar
Configuration: <code-source> (ignore manifest Class-Path) in META-INF/boot.xml in D:\oracleasr3\j2ee\home\oc4j.jar
Can anybody help in figuring out where Jaxb jars(3rd party jars) are to be kept so that OAS access it?
We tried using the applib folder to load the jars but we are getting class loading errors.
When new instances are created, class loading is not happening.
Pls help.
Thanks
Kavya

Are you using Application Server Release 3 or Release 2? There are different versions listed in your mail.
I think you probably want to add this as a shared library via EM and then import the shared library to your application with the application's xml config files.

Using third party tool to initiate a Forte batchprogram

Hello Forte Users,
Our company has acquired a software product called Maestro. It's a
production scheduling facility that manages tasks for batch mode execution.
We would like to know if anyone out there has had any experience using this
product with Forte. One recommendation that we discussed was to have
Maestro start a script on Escript to communicate to an agent that would
start the batch process at a specified time. Has anyone done something
similar or can offer any suggestions ?
Thanks in advance,
Jean Mercier
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Jean,
We use Maestro for all our scheduling scripts. To start\stop the
environment and start\stop applications. We create a shell script that uses
escript to start/stop applications. Maestro just calls the shell scripts
and monitor it for completion. I think you have to write the shell script
in a standard way to return an error if it does not finish properly. Here
is an example:
#!/bin/csh
source /appls/forte/fortedef.csh
$FORTE_ROOT/install/bin/start_nodemgr -fm "(x:300000)" -e TR2ProdEnv
ps -fu forte | grep -v grep|grep nodemgr>/appls/forte/production/scripts/KBB
set KBB=/appls/forte/production/scripts/KBB
if (-z $KBB) then
exit 1
else
exit 0
endif
Hope this helps.
ka
Kamran Amin
Forte Technical Leader, Core Systems
(203)-459-7362 or 8-204-7362 - Trumbull
[email protected]
From: Jean Mercier[SMTP:[email protected]]
Sent: Monday, April 12, 1999 10:36 AM
To: Forte-Users (E-mail)
Subject: Using third party tool to initiate a Forte batch program
Hello Forte Users,
Our company has acquired a software product called Maestro. It's a
production scheduling facility that manages tasks for batch mode
execution.
We would like to know if anyone out there has had any experience using
this
product with Forte. One recommendation that we discussed was to have
Maestro start a script on Escript to communicate to an agent that would
start the batch process at a specified time. Has anyone done something
similar or can offer any suggestions ?
Thanks in advance,
Jean Mercier
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Using third party keyboards in native Apple apps on iOS 8

Hello,
I have an iPhone 5S, running iOS 8(and recently installed 8.0.2). I was excited about getting to use third-party keyboards, but for some reason it is not working for me. For whatever reason, I can use these keyboards (I've tried many, all to the same effect) in other apps such as Chrome or Facebook, but on any of the native Apple apps (Notes, Reminders, but especially Messages and Mail where typing is most needed) I am unable to select them. In fact, the little globe you click and hold to make the different keyboards come up isn't even on my keyboard. I've looked around a little and tried some fixes (uninstalling and reinstalling, deleting all other keyboards, restarting the phone, turning off AssistiveTouch, etc.) but have had no luck. Has anyone else experienced this, and more importantly, has anyone found a solution? I was hoping the 8.0.2 might address it but nothing has changed.
Thank you!

I'm having the same issue. IPhone 5S has third party keyboards working in safari but not other apps (8.02). IPad with 8.02 has them working everywhere. Any ideas?

Consignment sale process using third party.

Hi Friends
Whether one can do Consignment sale process using third party. That is instead of stock being supplied by the Company a third party supplies the goods directly to the customer but this stock is to be treated a consignment stock.
Is this possible....if yes then how.
Nagesh Murthy.

hi;
This is very much possible. Well a little ABAP help would be needed of course. But this is how it can work....
1. Initially create a contract with the Vendor and let him build stocks and keep them in consignment. The contract itself will be for consignment. So the PO we create must be for consigned stocks.
2. Once the stocks are created in consigned status we can change the availabilty check to refer to the stock status in the consigned level. So getting a Schedule line will not be an issue.
3. Now, when the delivery is created we can trigger an output where in we can consume the stocks. This output would typically trigger a Call Off PO which will consume the stocks from the consigned status for delivering. This will happen only at the System level. Physical good will always be in the Consignment status at the vendor location. Once the Call Off PO is GR'd the stocks comes in to our account and then the PGI is done. To develop this we nee ABAP's help.
4. So all along the Stock is treated as Consignment stock and only at the time of PGI we take it into our account.
Hope this helps. Do let me know if you need further info.
Regards,
Mani.

Using third party plug-ins

Hi.
How do I use third party plug-ins. I've just installed SSL LMC-1 component, but i can't find in the insert pop-up menu on the Logic channel strip.

Hi,
I had that plugin,but it no longer shows up under Logic 7.2.3,which is what I'm running now.So I do not use it anyomer,at least until it is updated.
Although a cool plugin,you might want to try either the Free Fish Fillets,which sound better to me,or another pay plugin like the Nomad Factory BT Compressor FA770 which is like the Fairchild,very close in fact.
Cheers

Can't use third-party earphones

Similar Messages

Maybe you are looking for