Can't Use Using The FTP In Dreamweaver

Hi all,
I've got the FTP in Dreamweaver linked up to my site but I'm
having troubles. I can download the pages from my host using the
Dreamweaver FTP but I can't upload I just get a timed out message.
I tried CuteFTP and I can upload & download with no trouble at
all. Is there a way I can configure the Dreamweaver FTP to check if
I have the right port open etc and has anyone had this trouble? If
so what was wrong?
Thanks very much all

When you connect to the Remote site, and look at the remote
side of the
EXPANDED File panel, what FOLDER names do you see at the top
level there?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Psych0sis" <[email protected]> wrote in
message
news:g1a029$i1g$[email protected]..
> Hi all,
>
> I've got the FTP in Dreamweaver linked up to my site but
I'm
> having
> troubles. I can download the pages from my host using
the Dreamweaver FTP
> but I
> can't upload I just get a timed out message. I tried
CuteFTP and I can
> upload &
> download with no trouble at all. Is there a way I can
configure the
> Dreamweaver
> FTP to check if I have the right port open etc and has
anyone had this
> trouble?
> If so what was wrong?
>
> Thanks very much all
>

Similar Messages

  • Can I dynamically select the FTP account and destination?

    I have a situation where, dependent, on a field in the contents of a CSV file I need to FTP it to a certain location.
    Now there are over 40 cases and I'd rather not set up 40 outbound FTP services, each with their own account but would rather have just one and dynamically set the account information from a configuration available from within the pipeline (i.e. via some user defined properties).
    Is there a way of doing this?
    regards

    I've made some progress on this. The XQuery function:
    fn-bea:lookupBasicCredentials
    can be used to get service account information at run time so now all I need is to be able to override some header values so that the FTP transport uses them instead but also need a means to change the FTP URL.
    Surely someone has come across this problem before and solved it?

  • The FTP function in Dreamweaver CS5 has suddenly stopped working. My ISP just had to upgrade their FTP servers and they said it was no longer compatible with the FTP in Dreamweaver CS5! Help!!

    Is there any update to Dreamweaver CS5 that will allow the FTP function to be compatible with the new FTP server protocol? Please help. Will I need to upgrade to CS6?

    Ask in the DW forum and be much more specific about the requirements for your FTP connection like its ports, TLS settings and so on.
    Mylenium

  • Bad FTP in Dreamweaver CS6

    The FTP in Dreamweaver CS6 is really bad and that's mildly said. Actually: it sucks. When will there be a solution? I am a user since the early days of Macromedia and it is never fixed. This article describes the problem perfectly: http://b.smpl.st/2012/08/dear-adobe-dreamweavers-ftp-sucks/

    What specifically have you tried to get your FTP up and running?
    I'm with Murray on this. I use DW's FTP pretty much exclusively, regularly uploading to several different servers from several different networks and I've never had an issue with the program itself. Any FTP problems I've had, aside from goofed up FTP setting caused by operator error, have come from external sources like bad routers, wonky server settings, lost permissions, insane company firewall settings, etc.
    I'm pretty sure with a little digging the folks here can help get your FTP running smoothly.

  • I would like to put Dreamweaver 8 on a new computer.  There is no "deactivate" function and the technical support person I chatted with recommended I come here.  Can I just use the serial number again?  How can I deactive?  Has anyone else run into this?

      There is no "deactivate" function and the technical support person I chatted with recommended I come here.  Can I just use the serial number again?  How can I deactive?  Has anyone else run into this?  How can I get Dreamweaver 8, which is no longer being activated by Adobe, on a new computer?  Is it even worth doing or do I need to get a new version.  What are the killer features I'm missing?

    If you manage to get it installed on your current OS, don't forget to install the 8.02 update.
    Adobe - Dreamweaver Support Center : Updaters
    Nancy O.

  • I am not able to use the ftp export in Muse. When I enter my host, name and password, I get a long interlude of rainbow wheel and finally the message that my ftp host cannot be found. I have verified the name and that it is port 21. I can export to html a

    I am not able to use the ftp export in Muse. When I enter my host, name and password, I get a long interlude of rainbow wheel and finally the message that my ftp host cannot be found. I have verified the name and that it is port 21. I can export to html and use another ftp client to upload (to the same server) but this is tedious and making minor changes is painful. Have you encountered this and found a solution?

    Hi Susan,
    In that case I will recommend that you consult a local technician/IT team and see if there is some network connectivity issue with your machine.
    - Abhishek Maurya

  • How can I use the FTP server on Oracle XML DB for plain text files?

    Hi,
    I need to generate comma separated files for download via FTP. The files are generated from Oracle Table data and should be published on a FTP Server. Would it be able to use the FTP Server on Oracle XML DB?
    If not, any suggestions?
    Thanks
    Frederik Christensen

    You can create a temporary CLOB with your CSV content, and then folder the CLOB into the XDB repository with DBMS_XDB.createRESOURCE()...
    This would work fine....

  • Can I pay for the Adobe Dreamweaver CC for a month,not using a credit card,but by bank transmission to your account?

    Can I pay for the Adobe® Dreamweaver® CC for a month,not using a credit card,but by bank transmission to your account?

    You can do wire transfer for:
    Complete Creative Cloud 1 year Paid Up Front Plan.
    You will have to navigate to online store.
    To use wire transfer method
    Select qualified 1 year paid up front manual renewal product.
    Complete checkout flow.
    You will be prompted to fill out the applicable form (Bank information for Digital River) to take to your bank and make the payment. You will be sent Reminder Payment and Delayed payment notification before the order automatically expires if we do not receive payment.
    Once payment is confirmed as received, You  will receive a notification that their payment was received and gain access to their subscription.
    Regards
    Rajshree

  • Why can't i use the ftp functions with a built file

    I have created a report program that connects to an MS Access database and generates a series of reports from it. i also wanted to give the user the ability to download the database. we haev the database stored on a server at a different building. i have used the labview FTP function in the internet tool kit. the program works fine in the development mode. however if i build an application the ftp call fails to work. i have added traps so that if i get an error i will know it. unfortunatly the program flows through with no errors but the database is not copied.
    i have also written an ftp function which works in the development mode and the application mode with no installer, but it does not work in the apli
    cation mode with an installer.
    Attachments:
    test_ftp.vi ‏28 KB
    shawns_ftp_get_files.vi ‏71 KB

    Well once again I find myself on a machine that will not let be take a look.
    I am glad to here that you have your app running.
    I am troubled by by the solution. It makes me nervous when functions behave differently in the two environments. Have you run this past NI support?
    I'll email myself this link as a reminder for monday.
    Thank you for the update.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • How do I use a specific host directory in the ftp setup?

    I am reestablishing links in CS4 to my websites after an upgrade from Vista to 7.
    I use Go Daddy and the subdirectory capability. I had a difficult time setting up the ftp connection and saw in another posting that the Host directory should be left blank. This indeed worked. The problem is that I want to control access of different designers to different websites that are contained in one hosting account. When I use the correct Host directory in the Site Definition dialogue box as I did with my setup on Vista, I get the error message:
    "An FTP error occurred - cannot open remote folder [FileName]/. Access denied. The file may not exist, or there could be a permission problem."
    However, the file does exist. I have tried various uses of forward slashes, in front, in back, and both, without success. I'm sure there is an answer.
    Any ideas?
    Thanks,
    Mark

    Can you verify that your user account has access to those other accounts?  Is this a reseller account where you have accounts under your own or is this a dedicated box or VPS where the accounts can be in different directories?  Is this a Windows or Linux box
    There's a few things that could be going on, but if it ends up being a permission issue Godaddy will be the only ones who can help with that.  But just an example of a path on a Unix/Linux environment, "public_html/".  There is no leading slash but there is a trailing slash in the path.  If you are connecting to a Windows server it could be slightly different, but my only experience with Windows is in a networked/VPN environment so if that is your case I am sure someone else here can help you out.

  • How to use a key file in the FTP Task using and SSL connection

    In the past I have used this code to set the FTP pass word in an FTP component task in SSIS.
    Does anyone know how to use a Key file in an SSL connection to download a file from an FTP site?  If not can you tell me where I can get the C# code examples to learn how to create a script task or if there is another way in SSIS to download large files
    from an SSL FTP site?  Thank you for any help offered.
    public void Main()
    ConnectionManager FTPConn;
    FTPConn = Dts.Connections["FTPServer"];
    FTPConn.Properties["ServerPassword"].SetValue(FTPConn, Dts.Variables["FTPPassword"].Value);
    Dts.TaskResult = (int)ScriptResults.Success;
    Antonio

    You can use SFTP for this.
    This is a way of implementing SFTP in SSIS using standard tasks 
    http://visakhm.blogspot.in/2012/12/implementing-dynamic-secure-ftp-process.html
    also see
    http://blog.goanywheremft.com/2011/10/20/sftp-ftps-secure-ftp-transfers/
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • Fedex can only be used with dreamweaver using metric, not pounds (lbs)

    Fedex can only be used with dreamweaver using metric, not pounds (lbs), evidently?
    This as per their tier 2 tech suport.
    They say I should just convert to metric, no joke!
    Any ideas would be greatly appreaciated?
    Also a warning to anyone thinking of using business catalyst for their site, sorry, their business.
    Their note to me:
    Your request (# 82816) has been solved. To reopen this request, reply to this email or go to the Help & Support page.
                  Silviu Ghimposanu (Adobe Business Catalyst Support)           
                  Apr 14 15:23           
        Thanks for contacting us Michael  
    Our engineering team has detected some problems when doing weight conversions (from the quantities entered in the interface to what’s used when making the API calls to FedEx) -
      He have added this to our internal bug tracker to be fixed for one of the future releases. 
        I realise that this might not be what you wanted to hear,but at this moment we do't have a workaround in order to send the
      dimensions in pounds and not in KG 
        Sorry for this inconvenience!
      Kind regards, 

    If you're in US it will be in pounds. If your site is set any other country
    in the rest of the world it will be metric. So BC or as you call it
    Dreamweaver will look at the site country, which you set when creating the
    site

  • How / where do I save the FTP plugin download on my computer to be able to click on it and use it in the Tools tab as I use to with the previous edition?

    I use FTP to upload a webpage to a website. In the old versionof Mozilla Firefox there was a tools tab that I used to click on to access the FTP function. I don't see it in the new 3.6 version. I have downloaded the add on to my Pc but not sure if I have saved it correctly or where to save it to in order to access it. please can you help?

    OS X: Changing or resetting an account password

  • Using SFTP with FTP Adapter: The SSH API threw an exception.

    Our SOA suite veriosn is 10.1.3.4.
    We have to get the file from SFTP server and put it on the SOA Server. (SFTP and SOA server are running in different machine)
    If Incoming file and outgoing file directory is located in SFTP server..GET and PUT operations works fine.
    but if I give Incoming File location = <SFTP location>... and Outgoing file location = <SOA server location>... I get the below error...
    <2011-01-28 01:45:51,043> <ERROR> <default.collaxa.cube.ws> <AdapterFramework::Outbound> file:/C:/OracleAS_1/bpel/domains/default/tmp/.bpel_FTPTest_1.0_f57b8d368277e2d025bfbd2992350d66.tmp/put.wsdl [ Put_ptt::Put(opaque) ] - Could not invoke operation 'Put' against the 'FTP Adapter' due to:
    ORABPEL-11445
    The SSH API threw an exception.
    The SSH API threw an exception.
    Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable.
    <2011-01-28 01:45:51,043> <ERROR> <default.collaxa.cube.ws> <AdapterFramework::Outbound> file:/C:/OracleAS_1/bpel/domains/default/tmp/.bpel_FTPTest_1.0_f57b8d368277e2d025bfbd2992350d66.tmp/put.wsdl
    [ Put_ptt::Put(opaque) ] - Rolling back JCA LocalTransaction
    <2011-01-28 01:45:51,043> <ERROR> <default.collaxa.cube.ws> <WSIFInvocationHandler::invoke> Fault happened: file:/C:/OracleAS_1/bpel/domains/default/tmp/.bpel_FTPTest_1.0_f57b8d368277e2d025bfbd2992350d66.tmp/put.wsdl [ Put_ptt::Put(opaque) ] - WSIF JCA Execute of operation 'Put' failed due to: The SSH API threw an exception.
    The SSH API threw an exception.
    ; nested exception is:
         ORABPEL-11445
    The SSH API threw an exception.
    The SSH API threw an exception.
    Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable.
    anyone can offer any help?
    Thanks,
    AB
    Edited by: AB on Jan 28, 2011 3:38 AM

    Hi,
    Thanks for the reply.
    As per client's requirement, we shouldn't be using java service for this functionality.
    And as you said, the oracle adapters are not taking anywhere, but guess have no other choice..
    Cheers,
    Varun

  • Can we use Windows IIS FTP server in SOA

    Can anyone help me out whether we can use windows IIS FTP server in SOA for ftp adapter file transfer operations.

    910764
    1:- I have not begged or requested for marking all answers as helpful. If answers are helpful then post author can do that.
    2:- I also follow same practice. I dont blindly mark all answers correct or helpful. It can waste other's time. Correct marking is very important. Hence my all question are not having close end.Few are still open for correct answers. I will happily mark them correct if you can help me in that.
    In the end , I will say Kindly refrain yourself using this platform as facebook or other social networking websites.
    I hope you will understand seriousness of this forum and utilize its member's posts at the most.
    Thanks,
    Ashu

Maybe you are looking for