Can't use video ichat connection failure

HI
only recnetly about two weeks that i have not been able to contact to any one using ichat. I am from New Zealand, i have tried to contact with friends in Australia and New Zealand however video ichat does not connect. I used to use it until about 2 weeks ago and then it stopped working.
text ichat works fine. even i can send invitation for video ichat and people can "accept" it however the connection fails.
can you please help me.

Hi,
iChat can not be pinned down to one specific Network.
In iChat 4 it sees several things as Two or more Networks.
MIMO routing devices the Multi Broadcast the WiFi Channels get seen this way.
Connecting to a LAN with two DHCP server such a a modem that routes doing DHCP and a Router doing the same - the Mac gets two IPs.
Similarly if you connect to a routing device with WiFi and Ethernet you get two IPs
(As will Hopping on to a Neighbour's Wifi Network whilst Ethernet to your own)
Parallels is a problem for some if it is set to Share the Mac's IP and the two VPNs that are created in System Preferences > Network are active (even if Red) they need to specifically be set to Off and the App set to get it's Own IP from the routing device.
Internet Sharing in System Preferences > Sharing can also be a problem even if there is nothing linked to Share it with.
As Firewire uses an IP like format to identify devices I have seen this connected to a Stills camera show up as a Network in System Preferences > Network and cause problems.
So it would seem that the sharing of the two Ethernet ports is seen as two networks by iChat.
10:08 PM Wednesday; August 13, 2008

Similar Messages

Can I use the Camera Connection Kit to transfer files from my Mob/PS3/iPod?

Can I use the Camera Connection Kit to transfer files from my mobile/iPod or Playstation 3 to iPad using a USB cable?
I have an *iPod nano 16GB 5g* & my mobile is a *Samsung G800* and *Playstation 3 80GB*.
_Thanks for reading_

The CCK will find/ask to download (if iPad supported formate )picture and video files if the device is formated in FAT 16 or 32 and the supported files are placed in a "DCIM" folder in the root directory. I have transfered such files from SD card and USB drives. However, not USB drive work. I had an old 2GB (very large) and when i connected it it said it drew too much power.
I also downloaded pictures and video files from a compact flash card and smart media card via a SanDisk USB card reader.
AppleIpod60GB wrote:
No. The CCK is only designed to allow you to import photos from a digital camera via USB or an SD card. You cannot import any data via this kit and no other files will work as it's designed for only the functionality it does. The kit looks for a folder with the label "DSC####### the same structure as most digital cameras, and will only function with JPG files.
Message was edited by: lllaass to add CF and SM info

Need to connect to upgraded Oracle EBS R12 version from R11. The current ODI set up is pointing to R11, Can i use the same connection to point to R12? Please hele experts..

Need to connect to upgraded Oracle EBS R12 version from R11. The current ODI set up is pointing to R11, Can i use the same connection to point to R12? Please hele experts...
Rp

1. in physical connections part can i use the same work schema
2. Can i use same contexts created or do i need to create everything as new and then try?
Thanks,
Rp.
Hi,
As you mentioned that you just upgraded the database, so the data is same and schema is same you can connect with the same work schema.
Yes, you can use the same contexts , but need to do Reverse Engineering for your new database.
And about data server, i think you also have no need to create new data server, if hostname,sid and port etc are same as these were with R11(consult with your DBAs regarding it)

Can i use single database connection in a hole java application?

can i use single database connection in a hole java application?.I have so many forms to use database connection.

Theoretically you can. Not only theoretically. I've seen lots of application which only uses one database connection (they were using, oracle or mysql)
The first reply given here assumed that the answer to
your question depends only on the design of your
application. That is not true.Yes it's true. Nothing in the original questions says that you aren't allowed to open or close the single connection that you have. It's looks more like the OP is interested in sharing a connection (i.e having a singleton or a connection pool with only one connection)
It does also depend on the behaviour of the database
in the background.
Most databases have a time out for connections that
are idle Not a problem. Most implementations of connection pools and applications which keeps a connection open have a timer which calls e.g. select * from dual (if you are using oracle) when the connection has been idle for X minutes.
(some, like db2 on z/OS, even cancel
connections, that are not idle, if they are open a
certain amount of time or have reached a given limit
of cpu seconds.)You would also have that problem if you had a connection pool with several connections.
In essence: If you have no control over the time
your application runs (and therefore your connection
is open) or over type or the configuration of the
database you are accessing, you can't do it.See above.
The closest thing to what you want would be using
PooledConnections, iif those are supported for the
database you want to access.Not true.
Kaj

Can I use Bluetooth to connect my PC

Can I use Bluetooth to connect my laptopTo transfer pics

No. These are the supported BT profiles. Connect to your PC with the supplied USB cable and use iTunes.

Can i use iPad to connect apple tv ?

can i use iPad to connect apple tv ?

Download the Apple TV manual for whichever model you have.
http://support.apple.com/manuals/#appletv
 Cheers, Tom

This has happened on several computers. I can download using video download helper with on problems until I attempt to download "Dishonorable Disclosures" on Yo

This has happened on several computers. I can download using video download helper with on problems until I attempt to download "Dishonorable Disclosures" on You Tube once a download attempt is made on that video download helper stops working for that video or any other video. Could this be a virus or malware? How do I fix download helper after this happens?

Which movie do you mean?
Try to clear the Google cookies.
*Tools > Options > Privacy > Cookies: "Show Cookies"
*http://kb.mozillazine.org/Cookies
You can also try to delete the webappsstore.sqlite file in the Firefox Profile Folder to clear the local storage.
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder
*http://kb.mozillazine.org/Profile_folder_-_Firefox

When using the migrate tool to migrate from windows to mac, can you use ethernet to connect the computers to each other?

When using the migrate tool to migrate from windows to mac, can you use ethernet to connect the computers to each other? In the Migration tool, I was only given the option of choosing the computer when it appeared on the same network, and didn't see an option to connect them to each other. Even though they're both connected to the same network with a wired connection, the migration is painfully slow.

Yes. The following quotation is from About Windows Migration Assistant
These are the preferred network connections, in order:
Use a CAT6-certified Ethernet cable that is in good condition to connect the Ethernet port of the PC directly to the Ethernet port of the Mac or Ethernet adaptor (USB or Thunderbolt). You shouldn't use an Ethernet cable that has any kinks in it or is missing connector tabs.
Use CAT6-certified Ethernet cables that are in good condition to connect the Mac and PC to your home network router/hub/switch. You shouldn't use an Ethernet cable that has any kinks in it or is missing connector tabs.
For wireless, use the fastest wireless signal possible (802.11n 5Ghz). Try to have the PC, Mac, and the wireless access point all in the same room close to each other.

My laptop is connected to company LAN on wire and I have another active wifi connection provided by a router. Can I use the wifi connection for mozilla connection and the wired for everything else? I'm on Win7.

I have 2 simultaneous active connections:
no1: wired connection to company lan; private IP 172.19..
no2: wireless connection to unrestricted traffic router; private IP: 192.168...
my question: can I use the wireless connection for mozilla traffic and the wired for everything else?
I'm on Windows7 Prof, all security updates installed.

Go to Control Panel > Network and Internet > Network and Sharing Center >
Click Change adapter settings from left panel > Open the network connection you want to change the DNS servers for by right click and select Properties > Select
Internet Protocol Version 4 (TCP/IPv4) and click Properties button > Choose the
Use the following DNS server addresses > enter the IP address for a
Preferred DNS server as well as an Alternate DNS server.
Primary DNS: 8.8.8.8
Secondary DNS: 8.8.4.4
This IP belongs to Google public DNS.
Note: Wired connections are usually labeled as Ethernet, while wireless ones are usually labeled as
Wi-Fi or Wireless Network Connection.
Uncheck Internet Protocol version 6
Mark as Answer if it's worked. Thanks. Balamurugan_Subramaniyan

Can I use HDMI to connect my AXC-603G features Intel HD Graphics to a monitor

My AXC-603G features Intel HD Graphics but only comes with a VGA connector and HDMI. My Dell monitor does have an HDMI connector. Can I Use HDMI to connect the two?

Yes, you can use the HDMI port on the computer to conenct the DEL monitor.Once the cable is conencted , you may press and hold the windows key and tap the P key for option to project display on to your monitor. You can also press and hold the windows key and tap the K key Click Second screen and then choose one of these options: Duplicate - You will see the same on both screens.Extend - Your screen is now spread over two monitors, and you can drag and move items between the two.Second screen only - You will see everything on the screen you just connected. The other screen remains blank. Click the Kudos to say “Thanks” for helping! select "Accept Solution" if your issue is resovled.

I can't use Raid Admin connect to Raid

Hi All,
i can't use raid admin connect to my Xraid.
network is ok, networkcable is ok.Raid works find.
when i use raid admin connect to Xraid, it shows me"connection error" and then the app take more than 50% cpu usage.
any ideas?

Hi Chris,
If the controllers are not properly seated in the RAID chassis, they will not be able to communicate with RAID Admin and you will get a connection error. Improperly seated controllers can lead to other problems as well, so I would recommend reseating them.
To do this, power down the RAID by pushing the power button on the back and holding it for about 5 seconds. The RAID will not power off completely, but all the indicator lights on the front of the chassis should go out. Once those lights are out, unplug both power cables. Release one of the controller cards by pushing inward on both clips, then pull the card about half way out. Push it back in gently until both clips click into place. Do the same with the other controller card. Plug both power cords in and push the power button to power the RAID back on.
You should either unmount your RAID from your server, or power the server off before you power off the RAID. You can power your server back on once all the indicator lights on your RAID show green. If you have just unmounted it, it should mount automatically once the RAID controllers are up and running.
Hope this helps.
-Phoenix

Can i use my iphone connection to run ipod touch

Can i use my iphone connection to run my ipod touch. My ipod has more memory and i have had it for a few years. All good apps and info on it. Can i use the phone connection to run my ipod. ext maps/ gps

GPS information cannot be output from the iPhone to any other device.
The only way to get Internet access on the iPod Touch is via Wi-Fi. To get a Wi-Fi signal from the iPhone it must be running iOS4 and be an iPhone4. This would also require a tethering capable data plan from the carrier.
A simpler solution would be to upgrade to a larger capacity iPhone like the 32GB model. Then there is only one device to be carried.

What commands can I use in iChat, like "/me"?

What special commands can I use in iChat?
I know about the command /me
And I know there's a command to roll dice
What are the other commands, or what command will get me a list of commands?

Hi,
I know about slashme ( /me )
For those that don't know it is something you can type in a Text Chat and it wil appear in the middle of a Text chat at the same point Timing and the Joining/Leaving messages.
/me waves will appear as "Ralph Johns waves".
The name that appears for you and your Buddies doing this depends on how you store your name in the Address Book (Real name in iChat) and those of your Buddies. If you only know/store their Screen Name That is what appears.
I don't know about the Dice roll though.
Could do with knowing what that is.
4:18 PM Sunday; September 20, 2009

Can I use HDMI to connect PC to TV?

I have an HP p7-1020 running Windows 7, 64 bit, and a Viore LED24VF60 TV. I can connect the TV using the analog VGA connections available on both the PC and TV. This works OK at a resolution of 1920x1080.
I tried using the DVI connection on the PC, a DVI to HDMI adapter and an HDMI cable to the TV. This works except the picture is too big for the screen. The Start Menu and the Date and Time are not visible even though the PC resolution is set to 1920x1080.
Is this typical? Do I need some special driver? (I checked the Viore web site but couldn't find any answer.)
This question was solved.
View Solution.

Castingman, welcome to the forum.
To use HDMI from the PC, you would have to install a PCI (not PCIE) video card that supports HDMI. I am not certain that you will find PCI cards with this function.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Can't Use Video with other Mac users who use AIM

I know that ichat is compatible for video chats with other pc users who use aim, but does it work with other mac users who use aim?
Everytime I try to chat with my friend, I get an error message when trying to start of a video chat.
BTW, I use a iMac G5 with an isight camera.

Hi Staci,
For a Bit of Clarity.
AOL have their Instant Message App. referred to as AIM.
Apple decided and did a deal with AOL that iChat could join their service Buddy Lists.
On these Discussions we tend to refer iChat as Logging into AIM, as they are the servers that the Buddy Lists are held on.
As iChat can also use Bonjour and Jabber, both of which have their own Buddy list window on your Mac. The Jabber side needs you to have a Jabber screen name - so again people differentiate between this and the AIM side.
I would guess you friend is trying to make it clear that she is using the AIM side of iChat as opposed to the Jabber side.
As has been said already, the Application side of things also tend to get referred to generically as "AIM" as well.
The Mac version has stopped and 4.7 and will only Text chat.
The PC side needs 5.9 to clearly Video or Audio chat with a Mac using iChat. (AIM 6.0 is not stable enough to A/V chat to iChat).
1:13 PM Saturday; January 27, 2007

Can't use video ichat connection failure

Similar Messages

Maybe you are looking for