Can't use youtube controls / windows controls (Close, Minimize,etc)

I cant use youtube controls, example play, volume, seek, etc (also with some other flash objects, not all)
I Can't use the windows buttons on the top right hand side, example close, maximize, minimize,etc
sometime I can't use non flash sections in some sites (facebook)
I have already tried:
run without add-ons - No help
reinitialize Firefox - Helped until i restarted firefox (still without add-ons)
No other programs on my computer has similar problems
and I found a post from somebody with the same problems:
https://support.mozilla.org/nl/questions/938412
If somebody could help me with this rather irritating problem, please do
Thx,

To troubleshoot issues that don't occur in [[Safe Mode|Firefox Safe Mode]] see the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article. Start with turning off hardware acceleration in the Firefox [[Options window - Advanced panel|Options window - Advanced panel]] (General tab) and then restart Firefox.
You also have two versions of Flash installed:
*Shockwave Flash 12.0 r0
*Shockwave Flash 11.7 r700
To remove the older plugin, find the path to the NPSWF32_11_7_700_xxx.dll file in [http://kb.mozillazine.org/About:plugins about:plugins] and delete the file (or rename it by adding an X in front of the filename. See [/kb/troubleshoot-issues-with-plugins-fix-problems#w_manually-uninstalling-a-plugin Manually uninstalling a plugin] for details.

Similar Messages

How can we use TABLE CONTROL in BDC and WORK FLOW of ABAP.

how can we use TABLE CONTROL in BDC and WORK FLOW of ABAP.?
please explain the important questions.

How to deal with table control / step loop in BDC
Steploop and table contol is inevitable in certain transactions. When we run BDC for such transactions, we will face the situation: how many visible lines of steploop/tablecontrol are on the screen? Although we can always find certain method to deal with it, such as function code 'NP', 'POPO', considering some extreme situation: there is only one line visible one the screen, our BDC program should display an error message. (See transaction 'ME21', we you resize your screen to let only one row visible, you can not enter mutiple lines on this screen even you use 'NP')
Now with the help of Poonam on sapfans.com developement forum, I find a method with which we can determine the number of visible lines on Transaction Screen from our Calling BDC program. Maybe it is useless to you, but I think it will give your some idea.
Demo ABAP code has two purposes:
1. how to determine number of visible lines and how to calculte page number;
(the 'calpage' routine has been modify to meet general purpose usage)
2. using field symbol in BDC program, please pay special attention to the difference in Static ASSIGN and Dynamic ASSIGN.
Now I begin to describe the step to implement my method:
(I use transaction 'ME21', screen 121 for sample,
the method using is Call Transation Using..)
Step1: go to screen painter to display the screen 121, then we can count the fixed line on this screen, there is 7 lines above the steploop and 2 lines below the steploop, so there are total 9 fixed lines on this screen. This means except these 9 lines, all the other line is for step loop. Then have a look at steploop itselp, one entry of it will occupy two lines.
(Be careful, for table control, the head and the bottom scroll bar will possess another two fixed lines, and there is a maximum number for table line)
Now we have : FixedLine = 9
              LoopLine = 2(for table control, LoopLine is always equal to 1)
Step2: go to transaction itself(ME21) to see how it roll page, in ME21, the first line of new page is always occupied by the last line of last page, so it begin with index '02', but in some other case, fisrt line is empty and ready for input.
Now we have: FirstLine = 0
          or FirstLine = 1 ( in our case, FirstLine is 1 because the first line of new page is fulfilled)
Step3: write a subroutine calcalculating number of pages
(here, the name of actual parameter is the same as formal parameter)
global data:    FixedLine type i, " number of fixed line on a certain screen
                LoopLine type i, " the number of lines occupied by one steploop item
                FirstLine type i, " possbile value 0 or 1, 0 stand for the first line of new                                                               " scrolling screen is empty, otherwise is 1
                Dataline type i, " number of items you will use in BDC, using DESCRIBE to get
                pageno    type i, " you need to scroll screen how many times.
                line      type i, " number of lines appears on the screen.
                index(2) type N, " the screen index for certain item
                begin     type i, " from parameter of loop
                end       type i. " to parameter of loop
*in code sample, the DataTable-linindex stands for the table index number of this line
form calpage using FixedLine type i (see step 1)
                   LoopLine type i (see step 1)
                   FirstLine type i (see step 2)
                   DataLine type i ( this is the item number you will enter in transaction)
          changing pageno    type i (return the number of page, depends on run-time visible                                                                             line in table control/ Step Loop)
          changing line      type i.(visible lines one the screen)
data: midd type i,
      vline type i, "visible lines
if DataLine eq 0.
   Message eXXX.
endif.
vline = ( sy-srows - FixedLine ) div LoopLine.
*for table control, you should compare vline with maximum line of
*table control, then take the small one that is min(vline, maximum)
*here only illustrate step loop
if FirstLine eq 0.
        pageno = DataLine div vline.
        if pageno eq 0.
           pageno = pageno + 1.
        endif.
elseif FirstLine eq 1.
        pageno = ( DataLine - 1 ) div ( vline - 1 ) + 1.
        midd = ( DataLine - 1 ) mod ( vline - 1).
        if midd = 0 and DataLine gt 1.
                pageno = pageno - 1.
        endif.
endif.
line = vline.
endform.
Step4 write a subroutine to calculate the line index for each item.
form calindex using Line type i (visible lines on the screen)
                    FirstLine type i(see step 2)
                    LineIndex type i(item index)
          changing Index type n.    (index on the screen)
if FirstLine = 0.
        index = LineIndex mod Line.
        if index = '00'.
                index = Line.
        endif.
elseif FirstLine = 1.
        index = LineIndex mod ( Line - 1 ).
        if ( index between 1 and 0 ) and LineIndex gt 1.
                index = index + Line - 1.
        endif.
        if Line = 2.
                index = index + Line - 1.
        endif.
endif.
endform.
Step5 write a subroutine to calculate the loop range.
form calrange using Line type i ( visible lines on the screen)
                    DataLine type i
                    FirstLine type i
                    loopindex like sy-index
        changing    begin type i
                    end type i.
If FirstLine = 0.
   if loopindex = 1.
        begin = 1.
        if DataLine <= Line.
                end = DataLine.
        else.
                end = Line.
        endif.
   elseif loopindex gt 1.
        begin = Line * ( loopindex - 1 ) + 1.
        end   = Line * loopindex.
        if end gt DataLine.
           end = DataLine.
        endif.
   endif.
elseif FirstLine = 1.
if loopindex = 1.
        begin = 1.
        if DataLine <= Line.
                end = DataLine.
        else.
                end = Line.
        endif.
elseif loop index gt 1.
        begin = ( Line - 1 ) * ( loopindex - 1 ) + 2.
        end =   ( Line - 1 ) * ( loopindex - 1 ) + Line.
        if end gt DataLine.
                end = DataLine.
        endif.
endif.
endif.
endform.
Step6 using field sysbol in your BDC, for example: in ME21, but you should calculate each item will correponding to which index in steploop/Table Control
form creat_bdc.
field-symbols: <material>, <quan>, <indicator>.
data: name1(14) value 'EKPO-EMATN(XX)',
      name2(14) value 'EKPO-MENGE(XX)',
      name3(15) value 'RM06E-SELKZ(XX)'.
assign:         name1 to <material>,
                name2 to <quan>,
                name3 to <indicator>.
do pageno times.
if sy-index gt 1
*insert scroll page ok_code"
endif.
        perform calrange using Line DataLine FirstLine sy-index
                         changing begin end.
loop at DataTable from begin to end.
        perform calindex using Line FirstLine DataTable-LineIndex changing Index.
        name1+11(2) = Index.
        name2+11(2) = Index.
        name3+12(2) = Index.
        perform bdcfield using <material> DataTable-matnr.
        perform bdcfield using <quan>     DataTable-menge.
        perform bdcfield using <indicator> DataTable-indicator.
endloop.
enddo.
An example abap program of handling Table Control during bdc programming.
REPORT zmm_bdcp_purchaseorderkb02
       NO STANDARD PAGE HEADING LINE-SIZE 255.
                Declaring internal tables                            *
*-----Declaring line structure
DATA : BEGIN OF it_dummy OCCURS 0,
         dummy(255) TYPE c,
       END OF it_dummy.
*-----Internal table for line items
DATA : BEGIN OF it_idata OCCURS 0,
          ematn(18),      "Material Number.
          menge(13),      "Qyantity.
          netpr(11),      "Net Price.
          werks(4),       "Plant.
          ebelp(5),       "Item Number.
        END OF it_idata.
*-----Deep structure for header data and line items
DATA : BEGIN OF it_me21 OCCURS 0,
           lifnr(10),      "Vendor A/c No.
           bsart(4),       "A/c Type.
           bedat(8),       "Date of creation of PO.
           ekorg(4),       "Purchasing Organisation.
           ekgrp(3),       "Purchasing Group.
           x_data LIKE TABLE OF it_idata,
         END OF it_me21.
DATA : x_idata LIKE LINE OF it_idata.
DATA : v_delimit VALUE ','.
DATA : v_indx(3) TYPE n.
DATA : v_fnam(30) TYPE c.
DATA : v_count TYPE n.
DATA : v_ne TYPE i.
DATA : v_ns TYPE i.
*include bdcrecx1.
INCLUDE zmm_incl_purchaseorderkb01.
                Search help for file                                 *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      program_name = syst-cprog
      dynpro_number = syst-dynnr
    IMPORTING
      file_name     = p_file.
START-OF-SELECTION.
       To upload the data into line structure                        *
CALL FUNCTION 'WS_UPLOAD'
    EXPORTING
      filename = p_file
      filetype = 'DAT'
    TABLES
      data_tab = it_dummy.
    Processing the data from line structure to internal tables       *
REFRESH:it_me21.
CLEAR :it_me21.
LOOP AT it_dummy.
    IF it_dummy-dummy+0(01) = 'H'.
      v_indx = v_indx + 1.
      CLEAR   it_idata.
      REFRESH it_idata.
      CLEAR   it_me21-x_data.
      REFRESH it_me21-x_data.
      SHIFT it_dummy.
      SPLIT it_dummy AT v_delimit INTO it_me21-lifnr
                                       it_me21-bsart
                                       it_me21-bedat
                                       it_me21-ekorg
                                       it_me21-ekgrp.
      APPEND it_me21.
    ELSEIF it_dummy-dummy+0(01) = 'L'.
      SHIFT it_dummy.
      SPLIT it_dummy AT v_delimit INTO it_idata-ematn
                                       it_idata-menge
                                       it_idata-netpr
                                       it_idata-werks
                                       it_idata-ebelp.
      APPEND it_idata TO it_me21-x_data.
      MODIFY it_me21 INDEX v_indx.
    ENDIF.
ENDLOOP.
                To open the group                                    *
PERFORM open_group.
        To populate the bdcdata table for header data                *
LOOP AT it_me21.
    v_count = v_count + 1.
    REFRESH it_bdcdata.
    PERFORM subr_bdc_table USING:   'X' 'SAPMM06E'    '0100',
                                    ' ' 'BDC_CURSOR' 'EKKO-LIFNR',
                                    ' ' 'BDC_OKCODE' '/00',
                                    ' ' 'EKKO-LIFNR' it_me21-lifnr,
                                    ' ' 'RM06E-BSART' it_me21-bsart,
                                    ' ' 'RM06E-BEDAT' it_me21-bedat,
                                    ' ' 'EKKO-EKORG' it_me21-ekorg,
                                    ' ' 'EKKO-EKGRP' it_me21-ekgrp,
                                    ' ' 'RM06E-LPEIN' 'T'.
    PERFORM subr_bdc_table USING:   'X' 'SAPMM06E'    '0120',
                                    ' ' 'BDC_CURSOR' 'RM06E-EBELP',
                                    ' ' 'BDC_OKCODE' '/00'.
    MOVE 1 TO v_indx.
*-----To populate the bdcdata table for line item data
    LOOP AT it_me21-x_data INTO x_idata.
      CONCATENATE 'EKPO-EMATN(' v_indx ')' INTO v_fnam.
      PERFORM subr_bdc_table USING ' ' v_fnam x_idata-ematn.
      CONCATENATE 'EKPO-MENGE(' v_indx ')' INTO v_fnam.
      PERFORM subr_bdc_table USING ' ' v_fnam x_idata-menge.
      CONCATENATE 'EKPO-NETPR(' v_indx ')' INTO v_fnam.
      PERFORM subr_bdc_table USING ' ' v_fnam x_idata-netpr.
      CONCATENATE 'EKPO-WERKS(' v_indx ')' INTO v_fnam.
      PERFORM subr_bdc_table USING ' ' v_fnam x_idata-werks.
      v_indx = v_indx + 1.
      PERFORM subr_bdc_table USING: 'X' 'SAPMM06E'    '0120',
                                     ' ' 'BDC_CURSOR' 'RM06E-EBELP',
                                     ' ' 'BDC_OKCODE' '/00'.
    ENDLOOP.
    PERFORM subr_bdc_table USING:    'X' 'SAPMM06E'    '0120',
                                     ' ' 'BDC_CURSOR' 'RM06E-EBELP',
                                     ' ' 'BDC_OKCODE' '=BU'.
    PERFORM bdc_transaction USING 'ME21'.
ENDLOOP.
PERFORM close_group.
                  End of selection event                             *
END-OF-SELECTION.
IF session NE 'X'.
*-----To display the successful records
    WRITE :/10 text-001.          "Sucess records
    WRITE :/10 SY-ULINE(20).
    SKIP.
    IF it_sucess IS INITIAL.
      WRITE :/ text-002.
    ELSE.
      WRITE :/   text-008,          "Total number of Succesful records
              35 v_ns.
      SKIP.
      WRITE:/   text-003,          "Vendor Number
             17 text-004,          "Record number
             30 text-005.          "Message
    ENDIF.
    LOOP AT it_sucess.
      WRITE:/4 it_sucess-lifnr,
             17 it_sucess-tabix CENTERED,
             30 it_sucess-sucess_rec.
    ENDLOOP.
    SKIP.
*-----To display the erroneous records
    WRITE:/10   text-006.          "Error Records
    WRITE:/10   SY-ULINE(17).
    SKIP.
    IF it_error IS INITIAL.
      WRITE:/   text-007.          "No error records
    ELSE.
      WRITE:/   text-009,          "Total number of erroneous records
             35 v_ne.
      SKIP.
      WRITE:/   text-003,          "Vendor Number
             17 text-004,          "Record number
             30 text-005.          "Message
    ENDIF.
    LOOP AT it_error.
      WRITE:/4 it_error-lifnr,
             17 it_error-tabix CENTERED,
             30 it_error-error_rec.
    ENDLOOP.
    REFRESH it_sucess.
    REFRESH it_error.
ENDIF.
CODE IN INCLUDE.
Include           ZMM_INCL_PURCHASEORDERKB01
DATA:   it_BDCDATA LIKE BDCDATA    OCCURS 0 WITH HEADER LINE.
DATA:   it_MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA:   E_GROUP_OPENED.
*-----Internal table to store sucess records
DATA:BEGIN OF it_sucess OCCURS 0,
       msgtyp(1)   TYPE c,
       lifnr LIKE ekko-lifnr,
       tabix LIKE sy-tabix,
       sucess_rec(125),
     END OF it_sucess.
DATA: g_mess(125) type c.
*-----Internal table to store error records
DATA:BEGIN OF it_error OCCURS 0,
       msgtyp(1)   TYPE c,
       lifnr LIKE ekko-lifnr,
       tabix LIKE sy-tabix,
       error_rec(125),
     END OF it_error.
       Selection screen
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS session RADIOBUTTON GROUP ctu. "create session
SELECTION-SCREEN COMMENT 3(20) text-s07 FOR FIELD session.
SELECTION-SCREEN POSITION 45.
PARAMETERS ctu RADIOBUTTON GROUP ctu.     "call transaction
SELECTION-SCREEN COMMENT 48(20) text-s08 FOR FIELD ctu.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) text-s01 FOR FIELD group.
SELECTION-SCREEN POSITION 25.
PARAMETERS group(12).                      "group name of session
SELECTION-SCREEN COMMENT 48(20) text-s05 FOR FIELD ctumode.
SELECTION-SCREEN POSITION 70.
PARAMETERS ctumode LIKE ctu_params-dismode DEFAULT 'N'.
"A: show all dynpros
"E: show dynpro on error only
"N: do not display dynpro
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 48(20) text-s06 FOR FIELD cupdate.
SELECTION-SCREEN POSITION 70.
PARAMETERS cupdate LIKE ctu_params-updmode DEFAULT 'L'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) text-s03 FOR FIELD keep.
SELECTION-SCREEN POSITION 25.
PARAMETERS: keep AS CHECKBOX.       "' ' = delete session if finished
"'X' = keep   session if finished
SELECTION-SCREEN COMMENT 48(20) text-s09 FOR FIELD e_group.
SELECTION-SCREEN POSITION 70.
PARAMETERS e_group(12).             "group name of error-session
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 51(17) text-s03 FOR FIELD e_keep.
SELECTION-SCREEN POSITION 70.
PARAMETERS: e_keep AS CHECKBOX.     "' ' = delete session if finished
"'X' = keep   session if finished
SELECTION-SCREEN END OF LINE.
PARAMETERS:p_file LIKE rlgrap-filename.
at selection screen                                                *
AT SELECTION-SCREEN.
group and user must be filled for create session
IF SESSION = 'X' AND
     GROUP = SPACE. "OR USER = SPACE.
    MESSAGE E613(MS).
ENDIF.
create batchinput session                                          *
FORM OPEN_GROUP.
IF SESSION = 'X'.
    SKIP.
    WRITE: /(20) 'Create group'(I01), GROUP.
    SKIP.
*----open batchinput group
    CALL FUNCTION 'BDC_OPEN_GROUP'
      EXPORTING
        CLIENT = SY-MANDT
        GROUP = GROUP
        USER   = sy-uname.
    WRITE:/(30) 'BDC_OPEN_GROUP'(I02),
            (12) 'returncode:'(I05),
                 SY-SUBRC.
ENDIF.
ENDFORM.                    "OPEN_GROUP
end batchinput session                                             *
FORM CLOSE_GROUP.
IF SESSION = 'X'.
*------close batchinput group
    CALL FUNCTION 'BDC_CLOSE_GROUP'.
    WRITE: /(30) 'BDC_CLOSE_GROUP'(I04),
            (12) 'returncode:'(I05),
                 SY-SUBRC.
ELSE.
    IF E_GROUP_OPENED = 'X'.
      CALL FUNCTION 'BDC_CLOSE_GROUP'.
      WRITE: /.
      WRITE: /(30) 'Fehlermappe wurde erzeugt'(I06).
    ENDIF.
ENDIF.
ENDFORM.                    "CLOSE_GROUP
       Start new transaction according to parameters                 *
FORM BDC_TRANSACTION USING TCODE TYPE ANY.
DATA: L_SUBRC LIKE SY-SUBRC.
*------batch input session
IF SESSION = 'X'.
    CALL FUNCTION 'BDC_INSERT'
      EXPORTING
        TCODE     = TCODE
      TABLES
        DYNPROTAB = it_BDCDATA.
    WRITE: / 'BDC_INSERT'(I03),
             TCODE,
             'returncode:'(I05),
             SY-SUBRC,
             'RECORD:',
             SY-INDEX.
ELSE.
    REFRESH it_MESSTAB.
    CALL TRANSACTION TCODE USING it_BDCDATA
                     MODE   CTUMODE
                     UPDATE CUPDATE
                     MESSAGES INTO it_MESSTAB.
    L_SUBRC = SY-SUBRC.
    WRITE: / 'CALL_TRANSACTION',
             TCODE,
             'returncode:'(I05),
             L_SUBRC,
             'RECORD:',
             SY-INDEX.
ENDIF.
Message handling for Call Transaction                              *
perform subr_mess_hand using g_mess.
*-----Erzeugen fehlermappe
IF L_SUBRC <> 0 AND E_GROUP <> SPACE.
    IF E_GROUP_OPENED = ' '.
      CALL FUNCTION 'BDC_OPEN_GROUP'
        EXPORTING
          CLIENT = SY-MANDT
          GROUP = E_GROUP
          USER   = sy-uname
          KEEP   = E_KEEP.
      E_GROUP_OPENED = 'X'.
    ENDIF.
    CALL FUNCTION 'BDC_INSERT'
      EXPORTING
        TCODE     = TCODE
      TABLES
        DYNPROTAB = it_BDCDATA.
ENDIF.
REFRESH it_BDCDATA.
ENDFORM.                    "BDC_TRANSACTION
     Form subr_bdc_table                                            *
      text
     -->P_0220   text                                                *
     -->P_0221   text                                                *
     -->P_0222   text                                                *
FORM subr_bdc_table USING      VALUE(P_0220) TYPE ANY
                                VALUE(P_0221) TYPE ANY
                                VALUE(P_0222) TYPE ANY.
CLEAR it_bdcdata.
IF P_0220 = ' '.
    CLEAR it_bdcdata.
    it_bdcdata-fnam     = P_0221.
    it_bdcdata-fval     = P_0222.
    APPEND it_bdcdata.
ELSE.
    it_bdcdata-dynbegin = P_0220.
    it_bdcdata-program = P_0221.
    it_bdcdata-dynpro   = P_0222.
    APPEND it_bdcdata.
ENDIF.
ENDFORM.                    " subr_bdc_table
     Form subr_mess_hand                                            *
      text                                                           *
     -->P_G_MESS text                                               *
FORM subr_mess_hand USING P_G_MESS TYPE ANY.
LOOP AT IT_MESSTAB.
    CALL FUNCTION 'FORMAT_MESSAGE'
      EXPORTING
        ID     = it_messtab-msgid
        LANG   = it_messtab-msgspra
        NO     = it_messtab-msgnr
        v1     = it_messtab-msgv1
        v2     = it_messtab-msgv2
      IMPORTING
        MSG    = P_G_MESS
      EXCEPTIONS
        OTHERS = 0.
    CASE it_messtab-msgtyp.
      when 'E'.
        it_error-error_rec   = P_G_MESS.
        it_error-lifnr       = it_me21-lifnr.
        it_error-tabix       = v_count.
        APPEND IT_ERROR.
      when 'S'.
        it_sucess-sucess_rec = P_G_MESS.
        it_sucess-lifnr      = it_me21-lifnr.
        it_sucess-tabix      = v_count.
        APPEND IT_SUCESS.
    endcase.
ENDLOOP.
Describe table it_sucess lines v_ns.
Describe table it_error lines v_ne.
ENDFORM.                    " subr_mess_hand
Also refer
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/bdc-table-control-668404
and
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
Regards,
srinivas
<b>*reward for useful answers*</b>

How can i use activeX Control in labview?

how can i use activeX Control in labview?
please describe me step by step.
thanks.

Well..that was quite helpful..but now I'm encountering certain problems. I've attached the VI I've made.
I don't need sound at the moment so I dropped it. (Although I tried to play it..but all I could hear was a very annoying sound.) Secondly I don't want to display any date or time..so i dropped that property too.
Now when I run this Vi...the webcam turns on, the screen of videocapx pops up..then the webcam light goes off..and another pop up appears saying..labview is not responding..and i have to close it reluctantly.
I haven't placed the stop capture property in this vi. i checked it by placing it too..but that doesn't work.
I would like to notify that my actual task is to acquire image and then compare it with another one already present on my pc. I want you to please help me out..solve my first query then I'll proceed with the latter part.
Attachments:
activexvideocaps.vi ‏20 KB

I there, my question is quite simple, I would like to know if the "apple remote control" can be used with a mac mini and , if so, it can be used to control also the "logic pro" functions (e.g. record, start, stop etc). Thks a lot, Danilo

I there, my question is quite simple, I would like to know if the "apple remote control" can be used with a mac mini and , if so, it can be used to control also the "logic pro" functions (e.g. record, start, stop etc). Thks a lot, Danilo

Good work, thanks for the report.

How can one use Mission Control with two monitors? Please bring Spaces back

How can one use Mission Control with two monitors. With Spaces I could treat each space as a single desktop.
SyBB

I use two monitors at work and have no issue. I have my mail set to use Desktop 1 and iTunes set to the second monitor of Desktop 1. I have browsers set to Desktop 2 and Fusion and RDC set to Desktop 3.
Two things that may help you. In System Preferences > Mission Control, disable the setting "Automatically rearrange spaces...". This screwed with assigning applications to certain spaces. And the other thing is don't use full screen on apps that support it. This just makes your second monitor superfluous.

Can I use pan control in stereo track and balance control in mono track ?

it seems that in logic I can only use pan control in mono track and balance control in stereo track .

This is a flaw from the first days of Logic.
There is a "helper" plug in called "direction ....." - I can't remember the full name. Anyway, it gives you more control over stereo tracks. You can narrow the width (left - right) and pan accordingly.
Hope this helps.
HL

Can i use parental controls restrictions alone or should i purchase 3rd party software

Can I use parental control restrictions alone or should I purchase 3rd party software?

There isn't much 3rd party software can do in the way of parental controls on the iPhone due to the way apps are sandboxed.

How can i use messages on windows

im trying to use my imessage on my laptop is there like a software that doesnt require jailbreak to send messages on the laptop?

ryan10132 wrote:
how can I use messages on windows
You can't.

How can you use symbols in Windows 7 on a IMac 27

How can you use symbols @$€%£¥ in Windows 7 on a IMac 27 mid 2011? I tried what was normally done on Windows and got nothing. Alt plus numbers and nothing happens, what am I missing?

Frosted Flake,
Are you referring to an equivalent to the Windows Character Map Application (charmap.exe) that allowed you to see the various characters available in each font, and then give you an ALT-nnn number you could key to use the character you wanted ?
If so you can use the Special Characters from the Edit menu of most applications. Once you have located the character/symbol you want double click it and it will be entered wherever you cursor is located in your application.
Further information can be found here :
http://support.apple.com/kb/PH3871
Hope this helps
Cheers
AF

Make a presentation with videos that can be used on a Windows PC.

I need to make a presentation that can be projected from a PC using Windows. I am using Keynote 09, and some of my "slides" are short videos in m4v format. How can I burn the presentation onto a CD so the CD can be used by a Windows PC?

He can't upload new photos for BannerZest as they have to be added to the application and included in the script.
Its possible for him to upload movies and slideshows to a folder on the server so that you can provide a hyperlink to the movie on the website so that it opens and plays in a new browser window.

Can I use CS5 on windows xp sp3? [was: install]

can i use cs5 on windows xp sp3

It is highly likely based on a cursory look at the page linked below. If you find the software you wish to install listed in the page linked below you can check to see if it is supported on the system you wish to install it:
http://prodesigntools.com/products/adobe-cs5-system-requirements.html

After update ipad3 to ios6, YouTube disappear. Where can I use YouTube?

after update ipad3 to ios6, YouTube disappear. Where can I use YouTube?

There's a new app in the app store from google. You have to search under iphone apps, it doesn't show under ipad apps.

Is there any way to increase the size of the window buttons (close, minimize, maximize)?

I want to increase the size of the window buttons (close, minimize & maximize) because you have to navigate so precisely using the trackpad to use them...it'd be easier if the buttons were a little bigger. Thanks.

Not possible at the present time. You may make your wishes known to Apple here:
https://www.apple.com/feedback/
Ciao.

HT4436 We changed the iCloud account on the Mac Book and now we can not use some part of iCloud like Documents, etc on the Mac book to sync to iPad.

Hi,
We changed the iCloud account on the Mac Book and now we can not use some part of iCloud like Documents, etc on the Mac book to sync to iPad.
It says it is not the principal account.
Regards,
JG

The iPad and the Mac need to be signed into the same account, 2 different accounts won't work

Can we use LabView controls in VC %3F

Hi,
I was wondering if Gauge and Tank controls from LabView can be used in VC++? We have labview installed in our lab and we use the graphic controls as major part of our software. We have one software that is written in VC++. Is it possible to export the controls from Labview to VC++? I know MStudio has all those controls for VC++, but our lab is not willing to spend money on MStudio alone. Any suggestions?
Thanks
Vijay

In a word, no. The controls are drawn by the LabVIEW application itself. They are not standard Windows controls.

Can't use youtube controls / windows controls (Close, Minimize,etc)

Similar Messages

Maybe you are looking for