Can't view files in mini bridge

Help -
I've just had to reinstall photoshop due to a pc crash but now I've reinstalled I can
't view my files in mini bridge. Bridge itself is fine. Do I need to reset something?
Thanks

Usually a reinstall does nothing as the preference in Bridge is unaffected. If if worked before the crashyou can reset your preferences by holding down the Ctrl key and starting Bridge. You should get a reset window with 3 options.
Hope this solves problem.

Similar Messages

Can't drag files from Mini Bridge

Hi
It's seems as an issue but I can't drag files from Mini Bridge to workspace thought my colleague can do that. Is it a problem with my configuration or internal bug of photoshop CS6?

It works now! Yes, I think "Big" Bridge wasn't start what time. Thank you!

Can only view file in its blue psd format when I open them in CS6

Can only view file in its blue psd format when I open them in CS6
Is anyone else having this problem?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

HT1660 how can i view files that i buck up from my old device to i tunes

how can you view file that i buck up from old divice to itunes

Reset and Erase before selling
Settings>General>Reset>Erase all Content and Settings

Cannot view folders in mini bridge

Hello,
when trying to use mini bridge in ID CS6, I cannot view folders. I can look at drives, and places such as desk top, but it will only find individual image files, and cannot find any folders. As most of my assest are in folders, this is exceedingly frustrating. I remember CS5 not having this issue. Is there a preference or setting I am missing, or is this how Adobe always "improves" their products when they update.
Any help is appreciated.
Thanks

I have done that, but it still does not find folders. Specifically, let's say folders within folders. I mentioned that I can find places, such as desktop, but it won't find 'folders' on my desktop. Just indivdual files. Here is a screen shot of what I mean. On my desk top, I happen to have a folder of assets, but it is not finding it when I have 'desk top' highlighted in the navigation. This is a problem that there seems to be now answer for.

Can not creat Ratings in Mini Bridge

I checked mode and they are in filmstrip. I tried all the other modes with the same result.
One other thing is the mini bridge icon does not appear automatically with the pallets. I have to go to the file menu and open it. It does show the file names. And I can edit them ( the names). But I cannot add a ratting. And if a file has a ratting it does not show.
I can add ratings just fine in big bridge.
But if I do a search for ratings ( 5 Stars) it finds them but does not show the ratings.

When you look at the bottom right of Mini Bridge, you have two sets of icons. The one on the left is the Preview mode and the second is the View mode. Filmstrip is one of the view modes. However, with Mini Bridge you have to be in a Preview mode to apply ratings. A demonstration of this can be found in the following video http://tv.adobe.com/watch/learn-adobe-bridge-cs5/use-mini-bridge-in-cs5-applications/. Skip ahead to 4:30 to see the demonstration of preview modes, including applying a rating.

Can't view photos in Adobe Bridge

Hi Everyone,
I just upgraded to a desktop, Dell Inspiron 3000 Series with Windows 7. I uploaded my Photoshop CS6 onto my new computer, but I cant view my photos on Bridge. No thumbnail previews, just the name of the photo.CR2. I can however view my Tiff files
Any idea how I can fix this? Would greatly appreciate the help, need to be able to see my photos soon!
Mahalo,
Maria

So, you can't see your RAW files. That probably means you have not applied any updates after installing CS6.
You have to update BOTH Photoshop and the Adobe Camera Raw plug-in. That should work through the Help menu in Photoshop: Help > Updates

Opening files through mini bridge, from within photoshop.

When opening files/images from within photoshop use adobe mini bridge, the files open slowly with a long delay?
Can't figure out why, but when files are open directly from photoshop it is lightning fast.
Running on a iMac OS X Yosemite
Version 10.10.2

Okay.. Yeah, that's why I'm running Windows 7 still
This may have to do with some of the bugs Apple introduced into Yosemite. They are working on a fix. Can't really think of much else, other than make sure everything is up to date. Maybe someone with more knowledge of Mini Bridge will find this post.
Benjamin

Can't transfer files from mini mac (10.4) to new imac

While setting up my father's new imac, the imac suggested selecting send files "to your new computer" ,or something to that effect, from the Migration Assistant in the mini. The only options on the mini were to transfer files from another computer to the mini. The mini is running system 10.4.11
Do I need to upgrade to system 10.5 before I can transfer the files?

I have a dsic for 10.5; do you think it will help if I install it? How else can I update Migration assistant?
I do not have access to a Mac with 10.4 on it to test this. However, It certainly would not hurt to upgrade the OS, and it might help.
Good luck.

Can't view files with long file names?

Hi, Im using Mac OSX 10.3.9 and I have a problem viewing files on a server that have long file names (i.e over about 20 characters) they do not show up on my mac but when viewed on a PC computer they are all there. Strange thing is though I have another mac on the same network running exactly the same operating system and version and files with long name can be viewed on that system ?? it is some simple preference does anybody know? Any help would be much appreciated. thank you.

Hi, I tried accessing a test file that I have made up with a long name through a browser and through FTP and cannot see it on either one. I can however see it on the other Mac that I have access to that is running the same OS and version etc... and also this file can been viewed on the PC's that are around me....

Time capsule settings changed now can't view files

Hi,
I changed my settings on my time capsule accidently and now I can't view my files. I click on the time Capsule in windows explorer and all I get is .com.apple.airport.sharepoint. I got this once before but can't remember how to fix it. I can see my TC files from my Ipad but not from my Windows 7 computer.
Help!!

The address is typed into the only place you can type addresses .. that is the address bar..
If it cannot reach the TC hard disk then you need to do some more fundamental checks.
1. Reset the TC to factory and start over.. Use all SMB names. As already stated.. all names must be short, no spaces and pure alphanumeric. Do it from a Mac or iOS with airport app.
2. Plug the windows computer into the TC by ethernet. Make sure the LED turns on .. connectivity on both the computer and the TC. Make sure the PC has an IP address from the TC by opening a command prompt and typing.. ipconfig
It should come up 10.0.1.x (x being any number).
3. To make sure you have bonjour simply load it again.. easiest is to download and install the windows version of Airport Utility.. http://support.apple.com/kb/dl1547
If it refuses to install or say it is already loaded then you already have it.
4. Make sure you set the file sharing page to Guest access on and workgroup to WORKGROUP.
5. Now type the name or the IP again into the address bar of windows explorer.
\\TCname or \\TCIPaddress.
You do not type what I put.. you type the actual name or actual IP. Clearly \\TCIPaddress will not work.. unless you named the TC TCIPaddress which would be rather odd. For example if the TC is default.. 10.0.1.1 then you type \\10.0.1.1 .. just to be clear.

Can't view file using Adobe Reader

I can't seem to view the file that was sent to me through email because I keep on getting an error that says something like "Adobe Reader can't view the file because it is either not a supported file type or because the file was damaged".
Can anyone help me?
What do you think is the problem?
Any answer that can help me out is very much appreciated.
Thanks,
Ronald

Hard to say without seeing the file but two most common reasons are 1. You are trying to open a file that is not a PDF 2. The file has been corrupted during an email transfer and is unreadable.
For the first, you need to open in the proper aplication. For the second, you would need to have them resend the file to you. To assure that it will open, it may be wise to have them Zip the file first then you can unzip it on your end and open it.

Can you view network drives in Bridge?

I am currently using a trial of CS4 and when I go to bridge to select the files that I want to import into Lightrooom ( the one thing I don't understand about lightroom not having a browser to see the pictures before you import, I think this is crucial to good workflow ) I am unable to see any of my network, however my 1.4 version of Lightroom can see all the network. I am probably doing something wrong can anybody help?

I hate to say this but you sound a bit distressed and aren't understanding me. I specifically stated that in my scenario I am able to view network items such as computers on the network that are unmapped but are connected to the network. I can go into those computers by twirling the triangle and viewing the shared folders. within those folders I can view items that are part of that drive. I can ALSO see mapped network drives and their contents. I did experience a single problem of not being able to view two large folders on a network computer but it did not say "building criteria". Usually "building criteria" only appears if you are "searching" for something. You might try waiting for the criteria to finish building which could take some time in Bridge, since when it takes this step it is searching according to index and non-index criteria. If it is non-index then it will be slow to respond to your search. If Bridge doesn't work properly you might try to contact Adobe customer support if you purchased the product recently and it is under warranty and registered to you. You cannot, as you said, open a file in CS4. CS4 includes Bridge and a host of other applications based on what version of CS4 you have. Please try to be more specific when you post as to the steps you took to reach your point of difficulty with the software. Network in Bridge is located under the "Desktop" icon in Windows. You have to twirl the Desktop in order to see the Network.

AE can't open files in Adobe Bridge

I have been using CS4 AE for a few months now, suddenly I can not browse my presets in Adobe Bridge. Even if I go to file_Reveal in Adobe Bridge, nothing comes up, nothing_no file shows up. I looked at Adobe Bridge, AE does associate with the Bridge.
No problems with Premiere and PS. Any place can I tweak to make this work?
Please help!

Thanks again for your help.
I went to Edit_Preferences and can see the Bridge be started on Login. The Startup Script shows the Bridge is associated with all programs in Premium Studio. My Quicktime is up to date. As I said before, there is no problems with PS or PPRO.
I have found that if I open AE, then go to File_Reveal in Bridge or Browse Presets from AE, there is nothing shown up, i.e. no response from AB. But then if I open the Bridge from Start Menu when AE is opened, it will show what I requested from AE.
What do you think? Is startup script corrupted? Thank you again.

Can't view files on remote server

I have CS3 on my primary machine and CS4 on my newer imac. I am trying to recreate my sites on the imac. I can connect to the server when testing but when I when I try to view repository I can see anything. I keep getting a prompt to set repository settings. I click on the link and enter the ip but I still can't see what's on the server. I only have to upload one file but since I can't see anything, I ended up uploading the entire site again. What info am I entering that I haven't already entered for the site. GoDaddy is the hosting company if that matters. I downloaded their cheat sheet but I don't see anything about repository settings on it.

First define your Local site settings in DW CS4.
Once the Local Site folder is defined, you should be able to log-in to your Remote server and GET files from server.
If you plan to work on the site from 2 computers, use file check-in/check-out. Ensure that you check-out each time or you won't be able to access remote files from your other computer.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Can't view files in mini bridge

Similar Messages

Maybe you are looking for