Can't view my security camera when i put in the ip address
when i type in the ip address it doesnt work
Hello,
More clues needed please.
- Where are you entering the IP Address?
- Is the camera on the same subnet as the Mac?
- What kind of camera is it?
- What software are you using?
- Are you viewing this locally or remotely?
mrtotes
Similar Messages
-
The ID works for everything else on my phone - why won't it work for iCloud? And if iCloud requires an email address, why isn't it simply required that my Apple ID be an email address? Those are largely rhetorical, since I don't expect anyone from Apple to actually explain it to me, but what do I need to do? Do I have to change the Apple ID I've had for years to an email address and then reset my phone to use that? Surely there's a simpler way.
Having signed out as suggested above, go to http://appleid.apple.com and create a new Apple ID if you don't already have one. You will need a working email address which is different from that in the ID already in use.
The set up your Mac/device(s) as indicated here:
http://www.apple.com/icloud/setup/ -
Viewing my security camera remotely
I have a MacBook Pro in the City, and an iBook G4 in the country. I have installed a security camera in the country, and I would like to view it while I'm in the City. But I am unable to logon to my country computer.
I also purchased SecuritySpy software, which helps to implement this. But it seems to serve up live stream only on my local network, not onto the internet. Have already checked with developer for help with this. All settings on this software are nominal.
The larger issue seems to be that my computer (cam notwithstanding) can't be found on the internet either. When I type in the address for the country computer, it does not appear.
Maybe I don't know how to make this happen......
Would appreciate any help.
ThanksLooking at the SecuritySpy web site, it seems that remote viewing feature uses port 8000.
You will need to configure the router you use in your country home so it forwards port 8000 from the internet to your iBook G4's port 8000.
How you setup port forwarding depends on the make and model of your router in the country home. Some Google searching for "make/model Port Forward" will most likely find instructions for your router.
If you do not have a router, and your iBook G4 is connected directly to your broadband modem AND your broadband modem is not also a router, then skip the Port Forwarding setup, and go to the next step.
To make your life easier, you may want to get a Dynamic DNS name which will make finding your country home's internet connection much easier. You can get a free Dynamic DNS name from No-IP.com and DynDNS.org. You also download a Dynamic DNS updating utility from the service you get the Dynamic DNS name from. This utility will run on your Mac and keep the Dynamic DNS name updated with whatever IP address your ISP assigns to your router.
If you have the firewall enable, you need to allow port 8000 through to the SecuritySpy software. NOTE: If you are behind a router, and this system never leaves the home (that is it does not go to coffee shops or other public WiFi access points), you can turn off the firewall and allow the home router to be your hardware firewall.
Once you have that all setup, you can then access your security camera/SecuritySpy software using something like:
http://yourDynamicDNSname.DynService.net:8000 -
I noticed a couple of days ago that my url bar on my imac was no longer there,I am new to the apple community and I am not sure how to progress with my qustion. I have tried selecting :- view / customise toolbar but the dropdown box which has various options to drag and drop does not show the address bar I am stuck can you help
Thanks.... I too had this problem and didn't have a clue why it disappeared at times and how it reappeared as well. Got another bird with the same stone
Re: I have lost my Safari url bar ,tried view/customise toolbar but when box opens there is no address bar to drag back can anyone help please
Aug 15, 2012 10:09 PM (in response to jame5allen)
Go to: Safari>View Menu>Select 'Show Toolbar'.
BCV -
How can I change my security questions when I don't remember the answers? I've been locked out now!
How can I change my security questions when I don't remember the original ones? I've now been locked out!
Reset Security Questions
Frequently asked questions about Apple ID
Manage My Apple ID
If all else fails:
Go to: Apple Express Lane;
Under Product Categories choose iTunes;
Then choose iTunes Store;
Then choose Account Management;
Press Continue;
Now choose iTunes Store Security and answer the bullet questions, then click Continue;
Sign in with your Apple ID and press Continue;
Under Contact Options fill out the information and advise iTunes that you would like your security/challenge questions reset;
Click Send.
You should get a response within 24 hours by email. -
How can I change my security questions when I don't know them
How can I change my security questions when I don't know them at all
Reset Security Questions
http://support.apple.com/kb/HT5312
If you can't solve problem, call Apple to help reset your Security Question.
http://support.apple.com/kb/HT5699 -
how can I change my security questions when I can't seem to get them typed correctly to get to that area?
https://iforgot.apple.com. If you can't resolve it yourself there contact Apple Account Security at http://support.apple.com/kb/HT5699
-
I would like to be able to view my security cameras at my home on my apple. I have been told that I would need to partition the hard drive to be able to take a windows program. Is there apple software that would allow me to see my security cameras on my mack book pro
Your security cam questions may have answers if you read the security cam or nanny cam section on EZJim's Website
-
On a 5s you can by pass all security measures via Siri, where as the 4S asks for an unlock. Why?
My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!
-
Is it possible to automatically trigger a camera when someone arrive in the background hahaha.. Just a wild thoughts you know, like when someone suddenly pop up, the camera will automatically fire. I'm planning to use it in our Horror tunnel this october.
You could try to use a motion sensor - in a do-it-yourself store you can buy motion sensors that turn on the lights when a burglar approaches the property. Connect this sensor to the remote control of your camera instead of to a light.
Probably you can buy ready-made motion sensitive remote controls, the photographers here will know. You would need this kind of remote control for wildlife photography. -
I can not view ANY videos on Vimeo, I have 'reset' the Ipad, original IOS 5, cleared the history and cookies, I haves changed the DNs number to 8.8.8.8, I have worked on this for 3 days now, HELP!!!!
Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.
-
HT204266 How come my credit card says invalid security code when I put my code in at the App Store?
How come my credit card says invalid security code when I put my code in at the App Store? I have a bunch of free apps when I had my ipad 1 now I have 2 and my credit card will not be read as authentic Watson ever I tried my girls card nothing do I need to have money on it for a free download? I even bought a couple of games but why with so many free ones? Please help me I'm slow so walkit through with me thnx also my ipad 2 is brand new out da box and I accidentally updated to 6.0 without finding out first about it so some pointers to it would help ...which I think that it has something to do with it.
Is the address on your iTunes account exactly the same (format and spacing etc) as on your credit card bill : http://support.apple.com/kb/TS1646 ? If it is then you could try what it says at the bottom of that page :
If the issue persists, contact your credit card company and verify that they and any company they use to process credit card authorisations have the correct information on file.
And/or try contacting iTunes support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
For iOS I would expect an updated version of the manual to appear here at some point : http://support.apple.com/manuals/ipad/
In the meantime there is this : http://www.apple.com/ios/whats-new/ -
I am from Bangladesh. I can't log in with my gmail Apple ID. When I put in the mail and password, and press sign in, it says it has to review on iTunes. Then I am directed to opening a new account. But why should I , since I have one. Plz help
Hi Ishrak,
I apologize, I'm a bit unclear on exactly what you are trying to log into with your Apple ID, or what exactly you are seeing (alert message, directions, etc) when you try to do so. If you continue to have issues with your Apple ID, you may find one or more of the articles linked from the following page helpful:
Apple ID - Apple Support
Regards,
- Brenden -
i recently have ipad but before i sell it i made a back up of it and by an iphone when i put all the date on my iphone some files and software did not install is there anything i can do to recover the lost data? please help
I don't think you're on iOS 5, I think you're using iOS 6. That's the latest version.
Unless you've used iCloud to back up your documents, you won't be able to restore them. And for future reference, you don't have to uninstall Pages to update your iPad anymore. Sorry about this. -
I just purchased a MacPro with 10.7.2 installed. I want to install 10.5 on a separate partition.
I created the partition with no issues, now when I put in the 10.5 install DVD and restart the computer, it does not restart.
All I get is a grey screen. no icons, no nothing. I have to shut the computer down.
I really need to do this. I plan on upgrading to FCP X, but I still need to finish some old projects that were done with FCP 7. I need the different boot drivesMac Pro - Mid 2010
Processor 2 x 2.66 GHz 6-Core Intel Xeon
Memory 8 GB 1333 MHz DDR3 ECC
Graphics ATI Radeon HD 5870 1024 MB
Software Mac OS X Lion 10.7.2 (11C74)
This is a brand new machine that I just purchased from Apple. It was delivered yesterday
The old computer is an old PowerMac G5, but my OS X install disc is a retail version of 10.5.
I also tried the OS X 10.5 install disc that came with my MacBook Pro (2.6 Ghz Intel Core 2 Dual).
Same issue - nothing but a grey screen when the system tries to boot from the DVD
Maybe you are looking for
-
Service Hub Transport not started
Hi all I have single virtual machine with Win2008EEx64 with role Domain Controller i try install Exchange 2010 with roles Mailbox,CAS and HUB When i install HUB role occur error. Service HUB Transport not start :( Here link with error http://img7.im
-
How i can generat the ".top" file at ultiboard
Hello how i can generat the files of our pcb design like " .top " file to use it for making our bourd by the machine
-
how can I suscribe to Photo-Feeds? In iPhoto this works easily with "cmd and U".
-
I don't stay logged into webpages
When I close the browser, I get logged off all my sites. What I mean is, for example, facebook. When I log in, i check the box to "stay logged in". however when i close my firefox browser, the next time i open up firefox and go to facebook, i need to
-
Problem using sql command line
Hello! I do have some problems with using the command line for INSERT statements. When I perform insert statements the data of these statements are lost as soon as I close the command line. Other statements like SELECT or CREATE TABLE work properly.