Can't View on the Web

The page I created was uploaded via Fetch to our university server. When I view the page on the web I can only see the text and browser background. Any help would be appreciated.
GB
MacBook Pro, 15.4, 1GB RAM Mac OS X (10.4.7)

Here's the website:
http://www.uky.edu/~gbould/Welcome.html
In addition to your other problems, you failed to preserve the iWeb site structure by failing to upload the folder which has the same name as your site does inside iWeb. This, plus the index.html file published alongside it, are the two items which should always be uploaded.
Also your server is forcing all browsers into the wrong encoding. You will need to talk to the people running it about that or add an .htaccess file to your space. See this note:
http://homepage.mac.com/thgewecke/iwebchars.html

Similar Messages

Can not view all the thumbnails in version 9 adobe standard

Hello,
I recently installed adobe standard 9 running parallel with adobe standard 5.
My end user is claiming of the view setting for patient data. She can not scroll all the way to the bottom
as she could in adobe 5. She can see all the thumbnails minus the last row. I have changed the prefereces to show the same
as adobe 5. However I can not get the correct settting to make it right for her.
Any adivse or trouble shoot steps would be appreciated. Adobe said to update the product, I have done that last night.

How do I do that?
Date: Tue, 14 Dec 2010 10:10:01 -0700
From: [email protected]
To: [email address deleted by host]
Subject: Acrobat Windows Can not view all the thumbnails in version 9 adobe standard
Change the size of the thumbnails, change the size of the thumbnails window, or upgrade Acrobat X.
>

When I try to print from my iPad I see a message "searching for printer" and then "no printer found.". I have a printer application loaded and it finds my wireless printer.   How do I get the iPad to do the same so I can print from emails, the web, etc?

When I try to print from my iPad I see a message "searching for printer" and then "no printer found.". I have a printer application loaded and it finds my wireless printer.   How do I get the iPad to do the same so I can print from emails, the web, etc? Thanks

sandrafromsilver spring wrote:
When I try to print from my iPad I see a message "searching for printer" and then "no printer found.". I have a printer application loaded and it finds my wireless printer.   How do I get the iPad to do the same so I can print from emails, the web, etc? Thanks
Go to the following link:
http://jaxov.com/2010/11/how-to-enable-airprint-service-on-mac-os-x-10-6-5/

Can't print from the web

no matter what i do i can not get any part of a web page to show up in "print preview" and therefore I can not print from the web. Using an HP Officejet Pro L7580 All in one, running Vista 32 bit, and IE 9. Have already uninstalled and reinstalled printer, drivers, etc. Any ideas?

Hi there I hope you are doing well and sorry to learn that you are having this issue;
when you reinstalled the printer did you download the latest driver,firmware from the HP site? If you did not GO HERE.
This the main support page of your printer if you need it in the future;
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lang=en&lc=en&product=2512008&task=&
Please download and run the HP print and scan doctor .
Let me know if this finds any errors, I will do my best ot help you if you need further assistance.
Hope this helps!
RobertoR
remember ~▼
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Can't view all the computers in my network on WSUS Console

Hello Everyone,
Windows Server 2008 R2
WSUS 3.0
The issue is: Can't view all the computers in my network on WSUS Console
1/ Installed Windows Server Update Services (WSUS)
I followed the steps how to install Windows Server Update Services ( WSUS ) correctly by following steps on technet.microsoft.com
2/ Edit Group Policy Management (GP)
Open "Group Policy Management" Console
by right click "edit" the "Default Domain Policy" and It took me to "Group Policy Management Editor"
I changed the "Windows Update" Setting under "Group Policy Management Editor"
by doing to "Computer COnfiguration > Policies > Administrative Templates > Windows Components > Windows Updates"
------------------------------------------------------------------------------------------------------|
|Enable |
|-----> Configure Automatic Updates
|
| ------>
4 - Auto download and schedule the install |
| |
|Enable |
|-----> Specify intranet Microsoft update service location
|
| ------>
http://ServerName.DomainName.net |
| (Address of the server where WSUS updates are downloaded to)
|
| |
|Enable |
|-----> Automatic Updates detection frequency
|
| ------>
22 |
| (hours)
|
|Enable |
|-----> Enable Client-side Targeting
|
| ------>
Win7; Server |
| (Name of the Computer Groups)
|
|------------------------------------------------------------------------------------------------------|
FYI: go to CMD and type "gpupdate" to apply the updates right away without waiting for the automatic one
3/ Launch Windows Server Update Services (WSUS)
a/ Run the WSUS Wizard
I ran the WSUS Server Configuration Wizard under Option on the left panel and followed it by running the
synchronization.
------------------------------------------------------------------------------------------------------|
|Choose Upstream Server |
|-----> Synchronize from Microsoft Update and press on next
|
| |
|Specify Proxy Server |
|-----> Left blank ( I won't be using a Proxy server) and press on next
|
| |
|Connect to Upstream Server |
|-----> Press on "Start Connecting" and wait until it's done, press on next
|
| |
|Choose Product |
|-----> Select the product needed and Press on next
|
| |
|Choose Classifications |
|-----> Select classification needed and Press on next
|
| |
|Configure Sync Schedule |
|-----> Synchronize automatically and press on next
|
| |
|Finished |
|-----> Check "Begin initial synchronization" and press on next
|
| |
|What's next |
|-----> It open the Help menu if you click on one of the four links
|
| ----->
Press on Finish |
|------------------------------------------------------------------------------------------------------|
FYI: The synchronization might take hours if it's run for the first time
b/ Computer Group Settings
Go to "Options" under "Update Services" and click on "Computers"
Change the option to "Use Group Policy or registery settings on Computers."
And click on "OK"
Final Result:
(only 4 computers are showing) all being under the same operating system, missing about 7 computers used as hosts with Windows 7 running on VM

Hi
You have to apply the WSUS Gpo policy to your computers OU(or which OU computers incelude).

Can i view & analysis the customer report asper the sales area wise how?

can i view & analysis the customer report asper the sales area wise how?

Hi,
If you are talking about FBL3N or any other FI customer subledger report, then Yes and No. If you have customers extended to multiple sales area, then no, if there is a one to one relationship with the sales area then yes.
Cheers.

I have been using the apple IPad camera connection kit and my photos can be viewed in the events... But the all imported folder is no longer there and the last import folder is empty. Is there any way to resolve this ang get my all imported folder back?

I have been using the apple IPad camera connection kit and my photos can be viewed in the events... But the all imported folder is no longer there and the last import folder is empty. Is there any way to resolve this and get my all imported folder back? as well as get my last import functioning normally?

Please please help me, if you know how.

How can I view both the layers panel & effects panel in PSE 11?

I have PSE11 and purchased Paint the Moon effects. How can I view both the Layers panel and the Effects panel at the same time? Was this an option in older versions of PSE that are used in the Paint the Moon tutorials?

At the very bottom right of the editor window click the little arrow to the right of the More button and choose Custom Workspace. Then your panels will behave the way they did in earlier versions--you can drag them out of the bin, see more than one, remove panels from The Clump, etc.

Sun x4170 ILOM - Can't get to the web interface 2 days after password reset

Just bought a used x4170. I was able to get iLOM on the network and get to the web interface logon screen after setting the IP for it.
I tried logging on but the password was not given to me. So I connected to the serial interface (rj45) from another machine and used putty to connect. Got to the preboot point and was able to reset the password to default, Rebooted.
I was then able to log into iLOM. That was 2 days ago. Today for some reason, I can't get into iLOM. It pings but I can't get to the web interface. I get the IE error "cannot connect" or unable to connect or something like that.
I'm completely new to this brand of server so consider me completely ignorant on all aspects of the hardware.......lol
Thanks

Hello
By default, you connect to the server’s service processor (SP) using the out-of-band network management port (NET MGT). The ILOM sideband management feature enables you to select either the NET MGT port or one of the server’s Gigabit Ethernet ports (NET 0, 1, 2, 3), which are in-band ports, to send and receive ILOM commands to and from the server SP. In-band ports are also called sideband ports.
You can refer more here : https://docs.oracle.com/cd/E19269-01/820-7959-11/820-7959-11.pdf
If you want to use the NET MGT port of ILOM, then your output should display similar to below
-> show /SP/network
/SP/network
 Targets:
 interconnect
 ipv6
 test
 Properties:
 commitpending = (Cannot show property)
 dhcp_clientid = none
 dhcp_server_ip = xxxxxxxxx
 ipaddress = xxxxxxxxx
 ipdiscovery = dhcp
 ipgateway = xxxxxxxxx
 ipnetmask = xxxxxxxxx
 macaddress = 00:10:E0:65:2F:20
 managementport = MGMT <<<<<<<<<<<<<<
 outofbandmacaddress = 00:10:E0:65:2F:20
 pendingipaddress = xxxxxxxxx
 pendingipdiscovery = dhcp
 pendingipgateway = xxxxxxxxx
 pendingipnetmask = xxxxxxxxx
 pendingmanagementport = MGMT <<<<<<<<<<<<
 pendingvlan_id = (none)
 sidebandmacaddress = 00:10:E0:65:2F:21
 state = enabled
 vlan_id = (none)
Hope this helps.
Best Regards
Bhavyesh

FAQ: Can I share on the web without sharing to Facebook?

FAQ: Can I share on the web without sharing to Facebook?
Answer:
Yes, GroupPix has a web-sharing feature built in. However, only the owner of the GroupPix Event can control whether it’s shared or not. If you go into the GroupPix Event settings, and scroll to the bottom, you see the option to share the album. Copy the URL and email it to a friend, or put it into any web browser to see the online album.
Note: If you created a GroupPix Event, then use the Share feature to email a link to the album, it automatically enables web sharing for you. Then, it generates an email with a link to that album, which you can send to others.

No, purchased iBooks can only be read on the iPad. Of course, purchased Kindle books can be read in both places.
Matt

Safari can't connect to the web proxy server (HTTP)

Hello,
I have following problem. I need to connect to the internet using a proxy server. I went to System Preferences/Network/Wi-Fi/Advanced.../Proxies. Then, I selected Web Proxy (HTTP) and enetered server's IP address and port. It looks like I did everything correctly, but Safary can't open any page because "Safari can't connect to the web proxy server (HTTP)". Does anyone know how to solve this problem?

There are three possibilities:
1. You entered the wrong address and port number for the proxy.
2. You entered the wrong user name and password, if applicable.
3. The proxy doesn't work or is incompatible.

How to Create/Modify/Delete a query view from the web template in BI 7.0

All:
In BW 3.5, the Query Selection View web item was introduced for users to create a query view to save the navigational state of a query. This web item was also available to modify and delete an existing query view.
The Query Selection View web item does not exist in BI 7.0. I see the drop down web item can be used to display the query views associated to a query.
Can anyone share how to create,modify,save or delete a query view on the web in BI 7.0
Thanks,
Kumar

Sanjay, we experienced the same issue. Below are a few pieces of information that may be of help: 1-The Save As button on the 0ANALYZER template saves the query to the portal. From Bex Web or Bex Analyzer, you have no access to these saved views. We created a ZANALYZER copy of the 0ANALYZER template and removed the Save As button. 2- If you right mouse click on any item in the query results grid of Bex Web, you get a small menu. Clicking on the menu item Save View will save the view to BI. You do not have the ability to delete the saved views from Bex Web. However, you can delete them from Bex Analyzer. This was not an option for us since most of our users are using Bex Web. 3- On the same menu, clicking on Bookmark, saves the navigation and also opens the Internet Explorer Favorites maintence window. The navigation is saved as an entry into the users Internet Explorer favorites where they can organize and delete their entries. However, deleting the favorite does not delete the entry for the bookmark in BI. The bookmarks are stored in table RSWR_DATA. Program RSWR_BOOKMARK_REORG can be used to manage the saved bookmarks. We are loading RSWR_DATA into a chracteristic so that we can query the information in order to help us manage it. I hope this helps you and others that appear to be struggling with the issue of saved views in Bex Web.

What's the best way to save clips for general viewing on the web?

I am new to iMovie, but not to Macs or file formats.
I have taken some video of kittens at a local cat shelter, hoping to post the clips at the shelter's website in efforts to get the kittens adopted.
I managed to work through iMovie myself, saving the clips so that the person responsible for the website can post them. I first saved them as .mov files - the web person can view them, but others cannot. (They are all using IBM-compatibles) She is trying to get them to launch from an html page. So I tried saving them as .wmv files, but the little fade-outs I placed at the ends of the clips were truncated... the fade-ins were there, but not the fade-outs.
The video started out very good quality, and I would like to retain as much of that quality as possible, while of course keeping them small and manageable. But first of all, I need the web person to be able to post them, and then need everyone to be able to view them.
Am I asking too much, given there are so many ibms out there?

you ask for a solution of a very common problem: the universal video format...
due to sheer market power, .avi and .wmv are the most used standards.
avi is just a container, little supported on Mac; you can choose it as an export option in iM, but it offers just a few compressors (dv/bmp = nice looking, but large, cinepak=small but ugly...)
for export to .wmv, you need, as mish mentioned, to buy a plug-in from flip4mac, we do read enthusiastic responses on that product... but, Mac-users need additional software to read these files (the free plug-in from flip4mac or the free wmv player for Mac from Microsoft)
RealPlayer needs costly encoders, and again special players...
a nice option is .flv, flash-video... needs investment into FlashMX, $$$$ or shareware as VisualHub...
finally, which works for me and my few PC friends, is usage of mp4... without .mov container; choose "mpeg4" in the expert options... your friend has to open that file once in Windows MediaPlayer manually once and save it again, to get rid of some meta-data "Quicktime needed" (which isn't true)... some PCs open these mp4 by double-click, some PCs demand for QT4Windows.. but, as said, manually (open dialog from within WMP) these mp4s are compatible..
better pic results are earned with that little free app iSquint, I LOVE to recommend, it has an excellent algorithm...
sorry, lots of tech blabla... difficult issue...
helpful?

Access a query view from the web

Hello,
I have a query with a view. I would like to simply be able to link to this query view in a Web Browser window. What would the URL be?
How can I do that, is it possible?
I know I can open the default view of the query, by choosing on Bex Toolbar (Tools > Launch in WebBrowser > Query (Default View))
Thanks,
Nick
Message was edited by:
Nick Bertz

Just add this to your URL: &DATA_PROVIDER_ID=[Technical name of view]
The result would be: http://host:port/sap/bw/bex?DATA_PROVIDER_ID=[Technical name of view]
Nothing else is mandatory

Crystal Viewer for the Web

Hello,
We are currently attempting to use Crystal reports out on our web, the reports are static and we were told that there is a free viewer down load for the web, is this current? If so where would you be able to provide me the link? I have also been told that there are only 3 threads available if we use the Viewer, which I believe indicates that we can only have 3 consecutive users, is this also true?
Thanks for your time.....

Just as an FYI, htere is a forum for SDK developers (.NET Development - Crystal Reports;
SAP Crystal Reports, version for Visual Studio) that will be better to post to in the future.
To create a web app in.NET you will need to reference the Crystal Reports assemblies for .net, place the viewer on your form, code the report path and any database logon parameters as well as any other code that you need to run the report (selection formulas, parameters, etc., etc.). For more resources re. developing with Crystal reports in .NET see the following:
http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/devsuite.htm
C:Program FilesBusiness ObjectsCrystal Reports 11.5Helpencrsdk_samples_aspxdatacrsdk_net_tutorials_115_en.zip
C:Program FilesBusiness ObjectsCrystal Reports 11.5Helpencrsdk_net_docdoccrsdk_net_doc.chm
http://www.businessobjects.com/global/pdf/dev_zone/VS2005_Walkthroughs.pdf
https://smpdl.sap-ag.de/~sapidp/012002523100006252822008E/net_win_smpl.exe
https://smpdl.sap-ag.de/~sapidp/012002523100006252712008E/csharp_web_smpl.exe
https://smpdl.sap-ag.de/~sapidp/012002523100006252812008E/net_web_smpl.exe
http://www.businessobjects.com/jump/xi/default.asp
Ludek

Can't View on the Web

Similar Messages

Maybe you are looking for