Can't view the setting tab to edit

I have WRT54GS I can't view the setting tab to check or change. It seem the tabs are light in color and I click on them. I did have a virius which I got rid of. I have removed the linksys software and re installed it the same problem.

Let me know of which setting tab that you want to check or change? Secondly which Linksys software that you reinstalled… Once reset the Router, power cycle the whole network and reconfigure it … For the reconfiguration of the Router, let me know the name of the ISP (Internet Service Provider) or the connection type that you are using means it is a Cable Connection or DSL connection?
So if you have a DSL connection you can refer to this link:
http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&login=1&vw=1&app=search&articleid=4020&userrole=Linksy...
So if you have a Cable Internet Connection you can refer to this link:
http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&vw=1&articleid=3686
So after configuration check whether you can see the tab that you are looking for…

Similar Messages

Can't view the setting manager

Hi, I'm using mozilla firefox as my browser and I can't play games online in facebook. I have tried to change the Global security setting panel but I can't view the setting manager. It's blank so I can't do any changes. I need help with it please. thank you

Your Welcome Chris
FYI, here's a summarry of my experience and findings from various forums regarding this update, hopefully it will help prevent others from the same issue or prompt someone to figure out a solution. From what I've read, my experiences or any combination of them are not uncommon;
I'm running Windows 7 x64 (updates current), IE9 on an HP ProBook 4730s. 2 years old, never had any issues
Last week Windows wanted to restart to perform updates. I let it and after restart I allowed Adobe to perform the updates that had been prompting me to install for a couple of days( Flash 11.6.602.171). Within minutes I started experiencing Blue Screens. This would happen randomally about every 5 - 10 mins. only with Internet Explorer.
Cause of Blue screens point towards igdpmd64.sys which is an intel graphics driver for hd3000 graphics ( I have intel hd3000 and AMD Radeon graphic chips.
I deleted all graphic drivers and reinstalled current ones from HP and got rid of my blue screens.
All worked well except, there was no Taskbar live preview(only showed icons instead of actual window), no silverlight video(blank section on screen), no embedded flash objects(only blank section on screen), Youtube worked fine, and no output for auxillary monitor on VGA or HDMI port.
I updated to IE10 with same results
I tried earlier versions of Flash with same results
I uninstalled kb2670838 and all works fine
Uninstalling kb2670838 also reverted back to IE9 so this update must be required for IE10
Hours and hours of work because of an issue with a Microsoft update. All issues are related to graphic problems, yet, the update was to improve performance of various graphic components. Yeh, it sure did! LOL
Hope this is helpful to someone.
Mike

I'm trying to reverb an audio clip in my timeline and I can't find the effect tab in the browser to drag to my audio clip to reverb. I can reverb the clip in the viewer but can't it won't drag to the timeline. I'm using FCE

I'm trying to reverb an audio clip in my timeline and I can't find the effect tab in the browser to drag to my audio clip to reverb. I can reverb the clip in the viewer but it won't drag to the timeline. I'm using FCE

You cannot drag the effects themselves to the timeline. You add them to a clip in the Viewer, just as you have done.
If the clip was already in the timeline when you opened it in the Viewer (by double-clicking it in the timeline to open it in the Viewer) and then added the reverb effect, there is nothing further to do, you have added the effect to the clip. You don't drag it back to the timeline.
You only have to drag the clip to the timeline if the clip was not already in the timeline (for example, if you opened the clip from the FCE Browser; or set different In and Out points in a master clip to use a different portion of the master clip in a different location in your timeline).
Depending on the effect you add, you may have to render the timeline after adding the effect. But I don't think reverb requires immediate rendering. One other note, you said you were working with an audio clip ... audio clips need to be AIFF (not MP3 or something else) and preferably 16-bit stereo.

I can't find the Firefox tab that takes me to edit and print et al. unless I have a little bitty screen.

I just got a new computer and got changed to windows 8, and the guy set it up with internet explorer when I was accustomed to using firefox. My son put it on firefox, but I can't find the firefox tab with access to edit, print, print preview, etc. , except when I have the firefox box on three quarters of the screen, which is too small. How do I get it to fill up the screen and still give me the little box so I can print? Please don't answer with an avalanche of gibberish, because my computer understanding is negligible.

Hi Senyax, how are you enlarging Firefox when you want it larger? These will give you different results:
(1) Maximize the window (middle button between _ and X)
You should still be able to see the top bar of the window with the orange Firefox button. If you can't see any of it, one of your Firefox settings files might be corrupted.
(2) Full screen (F11 key or orange Firefox button > Full Screen)
By default, nothing other than the website shows in full screen mode. Although you can have the tab bar and toolbar display (slide your mouse to the top of the screen and right-click a blank area of the tab bar, then uncheck "Hide Toolbars"), you cannot use the orange Firefox menu button in this mode.

Can I hide the set time in the event boxes in Week View?

Can I hide the set time in the event boxes in the Week View?

David
No way around this that I can find. That toolbar pops up if you pause the show.
The nearest I could figure is to use the settings button for a long slide - 'Play each slide for 120 seconds' then tapping the arrows will move the slides along without showing the toolbar. And the 120 second slide is almost as good as a pause.
iPhoto menu -> Provide iPhoto Feedback
Regards
TD

How can I view the number of reproductions in a column beside of the song in the "Artists" tab?

How can I view the reproduction number in a column beside of the song in the "Artists" tab?

Hi DirtyDawg,
COUNTIF is your friend here.
If your source is in column C and your streams are 1, 2 and 3:
=COUNTIF(C,"=stream1")
=COUNTIF(C,"=stream2")
=COUNTIF(C,"=stream3")
These need to be in a footer or header row or in a different column than C.
hope this helps,
quinn

Files that used to be visible are now hidden in Mavericks. How can I change the setting to view the same files as before? I do not need the hidden files that are typically invisible.

Files that used to be visible are now hidden in Mavericks 10.9.1. How can I change the setting to view the same files as before? I do not need the hidden files that are typically invisible.
I am having trouble locating such files as PDF's INDD, AI etc. When I view all hidden files and try to open it in the program..it looks like it is really not on the drive. Has anyone come across a solution?

You may need to rebuild permissions on your user account. To do this,boot to your Recovery partition (holding down the Command and R keys while booting) and open Terminal from the Utilities menu. In Terminal, type: ‘resetpassword’ (without the ’s), hit return, and select the admin user. You are not going to reset your password. Click on the icon for your Macs hard drive at the top. From the drop down below it select the user account which is having issues. At the bottom of the window, you'll see an area labeled Restore Home Directory Permissions and ACLs. Click the reset button there. The process takes a few minutes. When complete, restart.
Repair User Permissions

Every time I try to view the music tab on iTunes it states an error: new null response. Can someone please help?

Hi,
Could someone kindly please help with my iTunes Store error? When attempting to view the music tab on iTunes store on my iPad 3 states the following error: new null response and cannot connect to iTunes Store.
It's extremely annoying as I only bought a new album yesterday and its suddenly got an error. I can use the films and tv programmes tabs which is strange, so its only the music tab not working. I have tried everything from other websites and blogs but nothing is working for me.
I hope someone can help?
Thanks

Hello there Mattspur,
I recommend sections 1, 3, and 5 of the iPad Troubleshooting Assistant found here http://www.apple.com/support/ipad/assistant/ipad/. If you get to section 3 I suggest closing ALL the apps.
Here is section 1 to get you starrted:
Restart iPad
To restart iPad, first turn iPad off by pressing and holding the Sleep/Wake button until a red slider appears. Slide your finger across the slider and iPad will turn off after a few moments.
Next, turn iPad on by pressing and holding the Sleep/Wake button until the Apple logo appears.
Is iPad not responding? To reset iPad, press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears.
If your device does not turn on or displays a red battery icon, try recharging next.
IF that does not resolve the issue, I would take a look at these articles next.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
And
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
Regards,
Sterling

I can't view the pictures I've downloaded from my ipad to my PC. The only options I have is Tunes, TV, Movies or Apps. How do I view pictures on my PC.

I can't view the pictures I've downloaded from my ipad to my PC. The only options I have is Tunes, TV, Movies or Apps. How do I view pictures on my PC.

What happens when you try to play the actual film ? And have you tried deleting them and (assuming that they're still in the store) redownloading them via the Purchased link under Quick Links on the right-hand side of the iTunes store home page - or going into Edit > Preferences and on the Store tab ticking the 'show iTunes in the Cloud purchases' tick box so that they show in the My Movies part of your library with a cloud icon against it for redownloading) ?
(You can't store films in the cloud, whether they will show there for redownloading depends upon what country that you are in - and if you move countries or if the rights-holder removes them then you also won't be able to redownload them. Ideally you'd be taking a backup copy of all of your downloads, and not relying on being able to redownload them in the future.)

Can't find the 'decoder' tabe in audio console wind

I just bought a x-fi fatalty. All drivers was installed.
However when I tried to set the spdif passthru to an external AV amp, I can't find the decoder tab in the audio console windows as shown in below screen capture I found on the web.
http://soundblaster.com/images/inline/articles/audio_console.jpg

Hi adrianmak?If you use spdif don?t need X-Fi decoder, when use spdif you send signal to a external decoder. Digital Connections, SPDIF and Dolby Digital Info[/b] ?Movies wth Dolby Digital (AC3) & DTSMovies on DVD often use encoded?audio in the form of Dolby Digital (AC3) or DTS. This means that all 6 channels are compressed into a single stream of digital data. A decoder is required to extract the channels and send the sound to the correct speakers. There are three ways to do this.
) Pass the AC3/DTS signal to a external decoder. This is where your optical/coax connection is used. To?go down this route, you must first have a?set of speakers or a decoder that?supports Dolby Digital.
In your DVD software, select 'SPDIF' as the audio output method and 'SPDIF Pass-through' in?your?soundcard options. What this does is?tells both the software and soundcard to leave the audio from the DVD in compressed form and send it straight through the digital outputs. Your?digital speakers/receiver will do all the decoding to give you full surround sound.
Please note that this?is the only way to get 6 channels through an optical/coax cable.
2) Decode the AC3/DTS with your Sound Blaster.?You should choose this option if?you don't have an external decoder. In the DVD software, select 'SPDIF' as the audio output method and make sure that 'SPDIF Pass-through' in the souncard options is?off. The DVD software will now pass the compressed audio to your soundcard, which will then decode the data. The soundcard will output the 6 channels using the?analogue connections (or digital DIN, more on this later). If you try?to use a digital optical/coax connection to your speakers, you will only hear faint sounds from the front left/right speakers.
3) Decode the AC3/DTS with software.?If you have a soundcard that doesn't support Dolby Digital (like the SB Li've! 24-bit) and you don't have digital speakers, the only way for you to get surround sound in movies is to use software to decode the AC3/DTS. The free versions of DVD software you get with hardware often don't support this feature,? you will most likely need a full version. First select 'Dolby Digital' or 'DTS' decoding in the DVD software audio options (you must select the right?sound format for the movie you are watching). Then make sure that 'SPDIF Pass-through' in the soundcard options is off. As with method (2) you must connect your speakers with the 3 analogue cables, not optical/coax.[url="http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=270">[/url]?What version you have?Try to update drivers from creative, MS Windows Update X-fi driver version?disable decoder tab.
Message Edited by Rad-Wulf on 2-04-200709:26 PM

How can I specify the default tab in a CHM Output?

My company uses CHM-based help for some of its products. We build the CHM files from RoboHelp 9, and while these CHM files don't really have a full Index attached to them, the Index tab shows up in the output anyway. Unfortunately, we are suddenly seeing that when the CHM file is launched from our program, the Index tab is displayed by default. We'd rather have the Contents tab be the default look, especially considering that the Index does not exist.
I have poked around into how you can specify a default tab for a CHM file, and the only information I have found suggests that using a CHM file creates a file (HH.dat) that specifies which tab should be displayed on a user-by-user basis, and that the last tab displayed when you close the CHM should be the first one displayed when you re-open it. While this is true if you open the CHM independent from the product, when you launch it from our program, it's all Index, all the time.
So, my question is: How can I specify the default tab for a CHM file? Or, failing that, how can I excise the Index tab from my CHM output.

Hi there
This will be something up to your application developer to resolve. When s/he issues the call to open the CHM, there are parameters that may be used to always open with the desired tab "in front".
Point your developer to the link below and advise that s/he is most likely interested in the section titled: Programming Tips.
Click here to view
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

I have tried everything, but still I can't locate the photos tab in iTunes...I have tried changing the resolution, started iTunes after connecting with the ipad2, nothing seems to work! please advise!

I have tried everything, but still I can't locate the photos tab in iTunes...I have tried changing the resolution, started iTunes after connecting with the ipad2, nothing seems to work! please advise!
I am also providing you with a screenshot of what appears! I need photos on my iPad2
Message was edited by: angana

You don't see it on the left-hand side of iTunes - you need to connect and select the iPad on the left-hand side, and then one of the tabs on the right-hand side that you use to select which content to sync to the iPad should be Photos : http://support.apple.com/kb/HT4236
You will need to select and sync all the photos that you want on the iPad together in one go as only the most recent sync remains on the iPad, not including photos in a subsequent sync is how you delete them from it.

How can I view the underlying URL to a hypertext link in text from galley or story mode?

How can I view the underlying URL to a hypertext link in text from galley or story mode?

click inside the hyperlink and open Window > Hyperlinks (in InCopy). The link is highlighted there. If you can't see it in the editable field, double-click the highlighted entry and it'll open in a dialog box.
AM

I took pictures on my iphone when it was on the lock screen and now I can't view the pictures in all of my photos. How do I view them?

I took pictures on my iphone when it was on the lock screen and now I can't view the pictures in all of my photos. How do I view them?

If you go to the Photos app, is there content in the Photo Library? These would be pictures that are synced to the phone from the computer. Photos in the camera roll are those that you take with the phone, or save from email, MMS on the phone. What type of pictures are you trying to get rid of? If you are trying to get rid of the synced photos, you need to connect to iTunes, select the iPhone in the device pane, then go to the Photo tab in iTunes and remove the check mark by sync.

In My Shared View the inbox tabs like My Tasks , Initiated Tasks are not being shown

In My Shared View the inbox tabs like My Tasks , Initiated Tasks are not being shown :
How to display the tabs in shared views also.
I just wanted to created one shared view that will look like Inbox but filter data for State = 'Completed'

Please update me if you can find any way to achieve this in BPM workspace

Can't view the setting tab to edit

Similar Messages

Maybe you are looking for