Can't view time or change start/end time of clip

Using imovie '09 and have several events that I imported from .mov files. imovie displays the total length of the clip but when I run the cursor over the clip in the browser the little timer window that pops up says "Created:" followed by the date/time that it was originally imported from a camera into .mov format. Every other file that I've imported directly into imovie from a camera gives me the running time of the clip as I run the cursor through the clip. I've tried to adjust the clip's date/time but it won't let me create a start/end time - regardless of what date/time I put in it assigns the same date/time to the start and end of the entire clip and doesn't show any running time so I can't mark/note specific times in the clip that I want to later select. Not sure why this is happening with these specific clips that were imported from existing .mov files - possibly because these clips were originally imported onto a pc and converted into .mov files, then imported into imovie after that? I still have the original tapes so I could import to imovie from scratch but would prefer not have to to do that as this makes up 20 hours of vid. Any solutions?

You might get a better response to your question over in the iLife > iMovie community. This forum is iMovie for iOS so most visitors here are working on a different platform, and while some may know about both products, many won't, me included.
tt2

Similar Messages

Setting a specific time zone for start/end times?

I tend to travel in clusters, and was frustrated on this current trip when all of my flight times were adjusted by 3 hours on my iPhone and iPad after landing in Florida from California. But they weren't "corrected" to the appropriate local times on any of the flights... which, of course, means that all of my alerts are at the wrong time!
Is there a way to specify which time zone an event occurs in? i.e., start time is PST, end time is EST
(I can see how to turn off automatic time zone changes, but that won't help me until I get home)
Thanks!
Chris

In Mac OS X Lion, it's iCal > Preferences > Advanced > check Turn on Timezone Support
In iOS 5, it's Settings > Mail, Contacts, Calendars > TIme Zone Support > on
The start and end time are in the same zone (and that's the zone associated with the event), but iCal automatically adjusts the entry to local time in the daily and related views. There isn't a way to have a unique timezone for the start- and the end-time in a single event.

Room Booking - unavailable if start / end time is :15 or :45

Hi all,
First apologies if this is in the wrong forum.
Due to the way our school day runs, we need to be able to book rooms from :15 and :45 (e.g. 10.15 to 11.15, 11.45 to 12.45).
You can change the start / end time manually but if you do the rooms do not show as available and the suggested times only work for :00 or :30.
Is there a way to change it so the rooms can be booked for a wider variety of times?
I've googled this endlessly and the only thing I can really find that might be applicable is changing the timeincrement but I think that only applies to the calendar view and the start / end time showing 15 minute increments instead of 30 as default but
does not have any impact on room availability.
Hopefully someone can help.
Thanks a lot

Hi Chris,
It is by design and we cannot change the time slot displaying. Your understanding would beappreciated.
Besided, it is recommended to add an End date for a recurrent meeting.
Refer to:
http://office.microsoft.com/en-us/outlook/HA011276781033.aspx
http://office.microsoft.com/en-us/outlook-help/best-practices-for-outlook-2007-HA010371521.aspx
Fiona Liao
TechNet Community Support

Logging start & end time of map execution

Hello,
I want to log start & end time of execution of my map (OWB 11g), so I've created a table for this purpose and I used it in every map that I want to log time, twice; First for logging start time, and second for end time.
I pass a constant with SYSTIMESTAMP value through my log table and also name of my map. but the problem is, both of my records' time (start & end) are very near to each other (difference is in milliseconds!) however my map takes time for more than 2 minutes! So, I've changed my map Target Load Order to: [log table for start time] + [Main tables of my map] + [log table for end time]. I've set my map Use Target Load Ordering option True, too.
Why it doesn't work? Is there any better solution for logging every map execution time in a table, or not?
Please help me ...
Thanks.

To do that, I have created a view that lists all processes that are running or finished. The view contains fields:
process_name
process_type (plsqlmap, plsqlprocedure, processflow, etc)
run_status (success, error, etc)
start_time
end_time
elapse_time
inserted
updated
deleted
merged
You could insert into your log table using select x from this view after every map, or, how I do it, is to insert into log table after every process flow. That is, after my process flow is complete I then select all of the details for the maps of the process flow and insert those details into my log table.
Here is the SQL for my view. This is for 10.2.0.3. For
CREATE OR REPLACE FORCE VIEW BATCH_STATUS_LOG_REP_V
AS
(SELECT PROCESS_NAME,
PROCESS_TYPE_SYMBOL,
(CASE
WHEN RUN_STATUS_SYMBOL IN ('COMPLETE_OK', 'COMPLETE') THEN 'SUCCESS'
WHEN RUN_STATUS_SYMBOL IN ('COMPLETE_FAILURE') THEN 'ERROR'
WHEN RUN_STATUS_SYMBOL IN ('COMPLETE_OK_WITH_WARNINGS') THEN 'WARNINGS'
ELSE 'NA'
END
) RUN_STATUS_SYMBOL,
START_TIME,
END_TIME,
ELAPSE_TIME,
NUMBER_RECORDS_INSERTED,
NUMBER_RECORDS_UPDATED,
NUMBER_RECORDS_DELETED,
NUMBER_RECORDS_MERGED
FROM OWB_RUN.RAB_RT_EXEC_PROC_RUN_COUNTS
WHERE TRUNC (START_TIME) >= TRUNC (SYSDATE) - 3)
ORDER BY START_TIME DESC;

Moved media files relink with different start/end times

Hi all,
I'm really stuck here so any help would be greatly appreciated.
I've got a number of FCP projects which use media from one drive.
The drive containing this media is soon to be in use by another project so I have done a direct copy of all the media onto another drive using finder. Literally a drag and drop copy of the files.
However, when I re-open the project and relink to the 'new' files on the new drive I am getting multiple "different start/end times" errors causing all the edited clips to play from the wrong times.
How can I stop it changing the time code when doing this?
Thanks
YD

On closer inspection, this only seems to be affecting BWavs, if that helps at all?

Contract Value Calulation based on Start & End Time

Hello Friends,
My client is into Vessel Hiring & the Vessels are given on hire for fixed period (with clear start & end dates & time).
For the above scenario we have a Periodic Contract to BIlling cycle which generates Invoices for every month. while creating the Contract we enter Basic Price as Day-Rate (Calculation type in Condition - O - Quantity - Daily Prices)
Thus the system automatically calculates the Basic Price Condition value based on number of days in any month.
Now the issue here is the client wants system to take Start & End time into consideration. In the Contract header - Contract Data tab we have developed two additional fields (Z-Fields) that capture start time & end time for every Contract.
So, we want system to calculate the Basic Price Condition value based on the Contract start date + Contract Start time.
Example :
1. Contract start date - 25.03.2010 & Start time = 12:00 noon. Basic Price = Rs. 10,000 per day.
2. In the Monthly Invoice, system would calcualte the Basic Price as Rs. 70,000 (7 days i.e. 25.03.2010 to 31.03.2010)
But here the client wants system to consider Start Time & determine Value as Rs. 65,000 as the Contract started on 12:00 noon on 25.03.2010.
Can anyone tell me how to achieve this?
I guess we should develop some routine (in VOFM) & apply it in Pricing Procedures.
But can some expert guide me on the logic of the routine & exactly where to apply the same in Pricing Procedure...
Thanks,
Jignesh Mehta

Hi,
Develop routine and make combination
if start date is xyz and start ime is less that 12 then price is so on so
if date start date is xyz and satrt time is more that 12 then price is so on so.
Hello I am not ABAPer, still tried to suggest you,don't mind for my suggestion
Kapil

Start/End Time zone question

Good afternoon:
This I understand: If I have time zone support enabled in iCal and I have an event in the Chicago at 10:00 am, I enter it in as 10:00 am and mark the time zone as CST. That way, when my Treo and I are in Chicago, the event appears on my Treo at 10 as it should and not at 9. (EST, where I live.)
When I travel, I use my calendar to enter the flight times.
For example, I might enter an event like this. "USAir Flt. 235, PHL to LAX" I would use 11:00 am as the start time and set the end time as 2:30. The 2:30 is PST and not EST.
Is there a way to show that an event can start and end in different time zones?

Good Afternoon:
Yes, I can enter a travel time as a beginning and and end seperately, but that doesn't allow me to see the duration as occupied.
I know I must sound like a loon, but I like that if you designate an event as taking two hours, those two hours are "marked or occupied" on my calendar and scheduling something else during the occupied period is easily seen as a conflict. It may seem odd, and I guess it is, that I might accidently schedule an event at the same time I was going to be in the air, but it is really a matter of wanting all the events in iCal to be treated the same way....as events/activities/meetings that consume time instead of a singularities that take place in an instant.
Does that make sense?
USAir Flt. 235, PHL to LAX is a six hour event...not something that happens only at the instant of 11:00 am. I would like to be able to see it as that and have it make sense.
Perhaps I should turn time zone support off, then it wouldn't matter, it just seems like ti should.

HT201250 Can one view pics from iPhoto application in time capsule backup?

I am attempting to use my time capsule as a general backup disk for all my pics and movies in iPhoto, to then be able to erase all pics from my iMac. Can one view iPhoto pics from the backup time capsule?

You cannot "see" the images in your iPhoto Library on the Time Capsule. You can only restore the complete library.
If you erase the iPhoto Library from your Mac, then iPhoto will not be able to find the iPhoto Library on the Time Capsule
Do NOT ever erase the images from your Mac.
If you do this, the only version that you will have will be on the Time Capsule. What will happen to your images when....not if....the Time Capsule has a problem?
In addition, Time Machine backs up the changes on your Mac. If you delete the iPhoto Library from your Mac, then Time Machine will delete the backup....and you will not know when this will occur.

Start/End times in Custom Formula - OTL

Hi,
Is it possible to access the start,end times of a particular day in a custom OTL Fast-Formula ?
Can someone point me to any links for writing custom Fast-formula.
The [user/Impl Guide|http://download.oracle.com/docs/cd/B53825_07/current/acrobat/121hxtig.pdf] has very limited information on OTL custom Formula.
TIA,
VB

VB,
Look at the seeded time entry rule FF and that will provide you with a sample code which provides access to all the attributes of timecard.
--Shiv

Calculate report execution start & end time (Not use SE30)

Dear all Abaper,
I am writing a report which recorded the execution start & end time
The following is a part of my coding.
Data : GV_ST_TIME LIKE SY-UZEIT. "START TIME
Data : GV_EN_TIME LIKE SY-UZEIT. "END TIME
START-OF-SELECTION.
GV_ST_TIME = SY-UZEIT.
END-OF-SELECTION.
GV_EN_TIME = SY-UZEIT.
WRITE: / 'START TIME:', GV_ST_TIME.
WRITE: / 'END TIME:', GV_EN_TIME.
Suppose the report has executed 5 second
from time : 00:00:00 to 00:00:05.
But in the output screen, the start time and end time always display the same time(00:00:05) if following the above coding.
However, if in the debugging mode, the start time and
end time will be different and really counted.
Does anyone know the reason and how to fix it if I don't wanna use SE30?
Thx in advance~

Hi boris,
1. minor problem
2. we have to REFRESH the time value
3. using GET TIME.
(Then it will work correctly)
4.
START-OF-SELECTION.
<b>GET TIME.</b>
GV_ST_TIME = SY-UZEIT.
END-OF-SELECTION.
<b>GET TIME.</b>
GV_EN_TIME = SY-UZEIT.
regards,
amit m.

Adjusting Start / End Time on Apple TV

Hello everyone,
In iTunes, we have the ability to adjust the Start / End time of a song or video by right-clicking the media > Get Info > Options. Then when we playback the media the next time, it will use the settings to determine how far into the media it should start and stop. Is there any way for these settings to get passed through to the AppleTV?
- Thanks

I would also like an answer to this! The original Apple TV applied the custom Start and Stop times, however the new one ignores them and plays the whole video file! Very annoying! Any solutions out there?

Is there a way I can have my form calculate a total time from beginning and ending time?

Is there a way I can have my form calculate a total time from beginning and ending time?

Sorry, but Formscentral doesn't support either a timer function or any kind of calculation. You might be able to do this if created your form in PDF. For help with PDF form creation in Acrobat I suggest you repost your question to the Acrobat Forum.
Andrew

Can code view wrap be changed

Its a basic question, but...
Can code view wrap be changed?
What I mean is... in code view, if I had a piece of code
which was longer than the width of my screen, can I change settings
to allow it to continue along horizontally instead of dropping down
to the next line automatically.
I know it doesn't affect the layout of the page... this is
purely for personal preference when i'm in code view. This happens
as standard in GoLive and is one of the few things left I'd like to
sort in my moving back to Dreamweaver.
many thanks in advance

In the version of Dreamweaver I have you select the 'View'
drop down menu, then 'Code View Options'. From there you should be
able to turn the word wrap on or off.
I expect it is similar for all versions of Dreamweaver.
Hope this helps.

If I have changed my end times of songs will they burn that way on a cd?

I've made a playlist, I really want all the songs on the one cd for my car and I'm about 1min or so over the 80mins. So I decided to change the end times of all the songs - but it hasn't made a different to the total playing time (at the bottom). So now, if I burn the cd, will it burn the proper songs or will it burn to my new end times?

That really does not work since music is not included in the backup. See:
iTunes: About iOS backups
puttly123 wrote:
backup your ipod. then sync your ipod to the computer, then restore your ipod and it will still have the right songs. its exactly what i had to do with mine.

ITunes Match on Apple TV ignores my custom start/end times on tracks

Some of my tracks in iTunes have custom start/end times set (to cut out skits and stuff). These set start/end times are respected by all my iTunes Match devices (iPod and desktop iTunes) except my Apple TV.

Hey guys,
I ended up here for having the same issue. iTunes Match playing the song for 20 seconds or so on Apple TV and then giving me error message saying iTunes is currently unavailable. Try again later. No trouble shooting worked for me as it didn't for you either. After using my apple tv for several months and experiencing occasional glitches that are somewhat similar to this probelm I boiled it down to 2 possible reasons. 1) some kind of bug that is fixable with latest firmwares Apple releases. 2) problems with Apple's servers. My best guess for this particular problem is the server problems because everything was playing fine until yesterday (Saturday) and the current frmware was released few weeks ago. It is strangely coincedental that most glitches seem to appear over the weekends. About couple of months ago I tried to watch an episode from a show and it would tell me the show would be available to watch in 24 hours. The loading was painfully slow. The problem only lasted a weekend. I wouldn't be surprised if the problem disappears tomorrow although I might be wrong.

Can't view time or change start/end time of clip

Similar Messages

Maybe you are looking for