Can't wake up my iMac in the morning and fans going full blast

Several times in the morning, after leaving my iMac on all night, I've found the machine asleep and the fans going full blast !?!
This in a cool 68 degrees room.
I then had to turn the iMac off manually and restart. I had a failed power supply replaced in April and am covered under the Apple care program (thank goodness !!!).
Could this be the logic board overheating now ?
Thanks for your help- Jim Vaughn

Hello Jm - it could well be another thermal problem, take a look at your Console logs and see if anything jumps out at you.
Since you do have Apple care (wise man) I suggest you call them and have them deal with the problem.

Similar Messages

  • MBP won't wake, is REALLY HOT, fans going full blast

    This morning I made sure when I closed the lid on my MacBook Pro, that it went to sleep (pulsing sleep light). I found that this doesn't always happen right away, unlike the old Powerbooks. I then put it into my laptop bag, confident that it was fully hibernating.
    When I arrived at work and pulled the MBP out of the bag, the sleep light was solid white, the laptop was really hot on all sides, and the fans were running hard. I opened the lid and there was no display, although I knew it wasn't sleeping because I could hit "caps lock" and it would toggle on/off. Apparently it had awaked while in my bag for some reason. The only way I could regain control was to hold down the power button and start from a "cold" boot. When I logged back in I could not find anything odd in /var/log/system.log during the time before the reboot.
    My Energy Saver settings for "battery" mode are set to "Better Battery Life" so theoretically nothing should be able to externally wake the MBP. Bluetooth is Off. I have no idea then what caused it to wake up and flip out. This is the second time this has happened and I've been wary of its sleep behavior. Is there an updated SMC firmware for the 17" model yet?
    This is really worrying because I could have left it in my bag for a lot longer and who knows, maybe it would have caught fire!

    It happened again. I did a hard shutdown to keep it from really geting hot. After the boot, I checked the system.log. At the time which I suspect the interrupted sleep occured I saw this, which seemed to repeat a few times:
    May 24 15:51:49 DragonStalker kernel[0]: System SafeSleep
    May 24 15:51:49 DragonStalker kernel[0]: hibernatepage_listsetall start
    May 24 15:51:49 DragonStalker kernel[0]: hibernatepage_listsetall time: 157 ms
    May 24 15:51:49 DragonStalker kernel[0]: pages 317726, wire 41405, act 17645, inact 56798, zf 23232, could discard act 40087 inact 138559
    May 24 15:51:49 DragonStalker kernel[0]: hibernatepage_listsetall found pageCount 317726
    May 24 15:51:49 DragonStalker kernel[0]: IOHibernatePollerOpen, mlget_interruptsenabled 0
    May 24 15:51:49 DragonStalker kernel[0]: IOHibernatePollerOpen(0)
    May 24 15:51:49 DragonStalker kernel[0]: writing 317506 pages
    May 24 15:51:49 DragonStalker kernel[0]: image1Size 62995968
    May 24 15:51:49 DragonStalker kernel[0]: all time: 7180 ms, comp time: 1223 ms, deco time: 0 ms,
    May 24 15:51:49 DragonStalker kernel[0]: image 251436544, uncompressed 568770560 (138860), compressed 250429744 (44%), sum1 b7819032, sum2 3170f161
    May 24 15:51:49 DragonStalker kernel[0]: hibernatewriteimage done(0)
    May 24 15:51:49 DragonStalker kernel[0]: sleep
    May 24 15:51:49 DragonStalker kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
    May 24 15:51:49 DragonStalker kernel[0]: Started CPU 01
    May 24 15:51:49 DragonStalker kernel[0]: IOBluetoothHCIController::restartShutdownWL this is a wake from sleep
    May 24 15:51:49 DragonStalker kernel[0]: System Wake
    May 24 15:51:52 DragonStalker kernel[0]: hibernate image path: /var/vm/sleepimage
    May 24 15:51:52 DragonStalker kernel[0]: sizeof(IOHibernateImageHeader) == 512
    May 24 15:51:52 DragonStalker kernel[0]: Opened file /var/vm/sleepimage, size 2147483648, partition base 0xc805000, maxio 400000
    May 24 15:51:52 DragonStalker kernel[0]: hibernate image major 14, minor 2, blocksize 512, pollers 3
    May 24 15:51:52 DragonStalker kernel[0]: hibernateallocpages flags 00000000, gobbling 0 pages
    May 24 15:52:53 DragonStalker kernel[0]: System SafeSleep
    May 24 15:52:53 DragonStalker kernel[0]: hibernatepage_listsetall start
    May 24 15:52:53 DragonStalker kernel[0]: hibernatepage_listsetall time: 213 ms
    May 24 15:52:53 DragonStalker kernel[0]: pages 318013, wire 41442, act 17793, inact 56833, zf 23297, could discard act 40087 inact 138561
    May 24 15:52:53 DragonStalker kernel[0]: hibernatepage_listsetall found pageCount 318013
    May 24 15:52:53 DragonStalker kernel[0]: IOHibernatePollerOpen, mlget_interruptsenabled 0
    May 24 15:52:53 DragonStalker kernel[0]: IOHibernatePollerOpen(0)
    May 24 15:52:53 DragonStalker kernel[0]: writing 317779 pages
    May 24 15:52:53 DragonStalker kernel[0]: image1Size 63012864
    May 24 15:52:53 DragonStalker kernel[0]: all time: 6870 ms, comp time: 1770 ms, deco time: 0 ms,
    May 24 15:52:53 DragonStalker kernel[0]: image 251865600, uncompressed 569880576 (139131), compressed 250799380 (44%), sum1 d4c3f6a7, sum2 7a9619a0
    May 24 15:52:53 DragonStalker kernel[0]: hibernatewriteimage done(0)
    May 24 15:52:53 DragonStalker kernel[0]: sleep
    May 24 15:52:53 DragonStalker kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
    May 24 15:52:53 DragonStalker kernel[0]: Started CPU 01
    May 24 15:52:53 DragonStalker kernel[0]: IOBluetoothHCIController::restartShutdownWL this is a wake from sleep
    May 24 15:52:53 DragonStalker kernel[0]: System Wake
    There is some indication that Bluetooth is involved (I could be wrong) but I know my Bluetooth is Off (icon is dimmed) and it is set to NOT wake the computer.

  • I can´t wake up my imac from Win 7

    I have a problem with my imac 21'5 year 2010. I have mountain lion and win 7 and until today was good. Yesterday, In preferences I choose bootcamp (win 7 installed) for I work in old program and when I finished, I put  my imac in standby mode. Now I can´t wake up my imac because it seems that wireless keyboard don't connect and the screen is black. I know that imac is on but I can`t do nothing.
    Can you help me?
    thanks

    Thanks Rugedar, but your solution was my first hipotetical solution. When turn off my imac, (push button 10 seconds), pull electrical connection (I expect 30 sec) and after push electrical connection and turn in my imac, as I hear when my imac turn on, but the screen remains black and the wireless keyboard and mouse don't work.
    Can you think of anything?
    Thanks

  • I have elements on both my iMac and mac book. On my mac book i can't hold down left click on the pad and on the right hand side move tools i.e. clone, erase tools etc

    i have elements on both my iMac and mac book. On my mac book i can't hold down left click on the pad and on the right hand side move tools i.e. clone, erase tools etc

    Please post Photoshop Elements related queries over at
    http://forums.adobe.com/community/photoshop_elements

  • I have purchased the VGA Connectors for both a iMac and Macbook Pro so that i can connect my promethean board projector to the computer and I can not get the image on the screen.  Does anyone have any suggestions?

    I have purchased the VGA Connectors for both a iMac and Macbook Pro so that i can connect my promethean board projector to the computer and I can not get the image on the screen.  Does anyone have any suggestions?

    Irelandbound wrote:
    thank you, I have the adaptors so glad that would work.  I just heard adaptors burn out often.  So Just thought for my main iMac computer, a plug would be best.  I will get one once I move.
    Any other suggestions or things I should know about apple products in Ireland.  I know there are no Apple stores there.
    An adaptor doesn't burn out. It merely serves as a means to connect the power prongs on your device to the power supply.
    I believe you are thinking of a transformer, which you do not need. A transformer converts one voltage to another.
    You don't need to do that as the power supply of modern electronics can take almost any worldwide voltage.
    Look at the label on the device. It should indicate the input power acceptable of 100-240 VAC, 50-60 Hz.
    Additionally, I found the adapters cheaper in the UK than I found them in the US. They were available in most supermarket chains. I wasn't in Ireland, so I can't say one way or the other.
    If you have something that doesn't have that input power spec, it would require a transformer.
    On other items like electric clocks or things with motors, you can connect them up to a transformer and the voltage will be correct, but the frequency may not. For clocks, that will cause them to not keep time well. For motors, they will burn out.

  • If I back up my iOS devices on my iMac in the US, then do a time machine backup to an external HD, will I be able to plug the external HD into a brand new iMac in the UK and restore the new machine as per the old one, and restore my iOS devices?

    If I back up my iOS devices on my iMac in the US, then do a time machine backup to an external HD, will I be able to plug the external HD into a brand new iMac in the UK and restore the new machine as per the old one, and restore my iOS devices?

    Since you don't really have a question, I will give you a very broad information source for the next time you have a Time Machine question.
    Please visit Pondini's Time Machine FAQ for help with all things Time Machine.
    Oh, you cannot use a computer whose only disk drive is the target of a an OS X cloning operation regardless of what software is used for the clone. You can, however, use the source drive except if you try to clone using Disk Utility.

  • Updated to ios 6 in the morning and then my phone went dead and I can't switch it back on. Dead, dead, dead. please help : (

    Updated to ios 6 in the morning and then my phone died.  I can't switch it back on. Dead, dead, dead... : (      Please help someone...

    See Here for
    Frozen or unresponsive iPhone
    Try this First...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    http://support.apple.com/kb/ht1430

  • If I delete my iCloud account on my iMac or the iPad, and if I sign back in using a new ID, will my storage things be lost?

    I want to change the ID of iCloud to be the same as my iMac.  If I delete my iCloud account on my iMac or the iPad, and if I sign back in using a new ID, will my photos in iCloud be lost?
    iMac 10.9.5   iPad OS 8.0.2

    Yes, they are tied to your iCloud ID.  Of course, if you can save them to your iPhoto events prior to making this change and they will still be in iPhoto.  Then you can add them to your new photo stream from iPhoto.  (If you have Automatic Import enabled in iPhoto>Preferences>iCloud they will probably already be in your events.  You can check by control-clicking on a photo.  If it says "Show in Library" it's stored in your events.)

  • How can I print just a part of the page and not the full page with Adobe Reader v 10.1.2?

    how can I print just a part of the page and not the full page with Adobe Reader v 10.1.2? I need to print a engineering print with lot of information but information is too small in letter size and I don't have a plotter.

    Two ways to print a portion of a page: zooming or using the Snapshot Tool.
    ZOOMING:
    Zoom into the area you want to print.
    Click the Print icon.
    Under "Pages to Print", make sure "Current view" is selected under "More options" (you may need to click "More options" to open it).
    If you aren't satisfied with the preview, try clicking "Fit" under the Size button.
    SNAPSHOT
    Choose Edit > Take A Snapshot.
    Drag a rectangle around the area you want to print. 
    Click the Print icon.
    Under "Pages to Print", make sure that "Selected Graphic" is selected under "More options".
    To enlarge the snapshot to fit the sheet of paper, choose "Fit" under the Size button.
    Hope this helps!

  • I am trying to attach multiple photos to an email from my ipad 2. I can see how to do it from the camera and camera roll option,but not from the photos program. What am I missing? Thanx so much!

    I am trying to attach multiple photos to an email using ipad 2. I can see how to do it using the camera and camera roll ap...
    But not using the photos ap..which is where the photos are. Any help would be appreciated.!

    In an album in Photos touch the Edit button and then touch the desired photos (up to 5). A blue check appears in each selected photo. Next touch the Share button at the upper left and select Mail. This starts a email with the photos attached.

  • How can I get an excel spreadsheet onto the iPad and make changes to it?  I need this for a meeting this afternoon.

    How can I get an excel spreadsheet onto the iPad and make changes to it during my meeting this afternoon?

    I just bought splashtop, you have to have your home computer online,and download the pc version.  I have used it ot watch movies and to "go to work" on my ipad.  It controls the desktop through the ipad.  Whiteboard by splashtop does that and more and is on sale.  The education director at the hospital I work at is using that one.
    Splashtop 4.99 remote desktop(or laptop) control. Whiteboard 9.99 is remote control and more 9.99
    Julie

  • On my ipad mini, when I delete an email from the inbox (and it goes into Trash), it immediately deletes that email from the server (ATT/Yahoo).  I've called support for both ATT and Apple and can't find a way to have the emails remain on the server.

    On my iPad Mini, when I delete an email from the inbox (and it goes into Trash), it immediately deletes that email from the server (ATT/Yahoo).  I've called support for both ATT and Apple and can't find a way to have the emails remain on the server. 
    My husband and I share an email address and if he misses a day checking email on his notebook, he doesn't receive the items that I have sent to Trash on my iPad Mini.
    Appreciate suggestions.
    [The curious thing is, if I "move" the deleted emails from Trash on my iPad Mini into the Inbox, I can go to my notebook, open my online email and they are back in my ATT/Yahoo Inbox.]

    Is your Yahoo account set up as POP3 or IMAP?

  • I no longer have access to system folders that allow me to remove old or incorrect PAGES templates. Need to find out how to do that. The only way I can do it now is to blank the template and replace the bad template with a blank.

    I no longer have access to system folders that allow me to remove old or incorrect PAGES templates. Need to find out how to do that. The only way I can do it now is to blank the template and replace the unwanted template with a blank. It was previously possible to go to MY TEMPLATES and remove the unwanted templates. I don't if this issue is before or since installation of 10.8 (a nightmare in my case, which led to significant failure issues).  And because I haven't tried to remove templates since finally managing to install 10.8 (now at 10.8.4), I don't know if this is typical of the newer OS or a problem. I've been a Mac user for more than 25 years, but I think I'm nearing the end of the road. By the way, I've never needed to do this before because the manuals always offered an answer... they don't seem to do that anymore. In any case, I don't know how this works... I'd prefer an email reply if that's possible. But that would probably be too easy, and I don't know how to get a reply.

    Thanks, I appreciate the help.  I think this is one of the problems Apple is creating by changing the OS so often. I had fomer colleagues at [a major aerospace contractor] who told me that so many original files were ultimately lost because of the deadly change in the "Save As" operation that they are now afraid of every OS update. Apple has badly damaged their support base with that very prominent company (they won't update now until they've fully examined and understand changes in the pre-conditioned nature of OS computer functions), and they are a whole lot less enthaled with Mac-related equipment/software. Can't blame them, I too used orginal files that way (as easy-to-use templates), and lost some important files before I realized what was happening (to late to revert). Companies should not have to retrain employees each time an OS gets an update, it's can be very expensive several different ways. They learned a painful lesson with that one. And because I'm now retired and don't use multiple devices, I need iCloud like I need a hole in the head... but I'm told there's no way to keep Apple out of my computer. Fortunately, because of major problems when initially installing Mountain Lion, one hold-over of the hardware/software damage I experienced was that iCloud can no longer access my computer even though everything else is working fine again. That was the only "good luck" I had as a result of that expensive nightmare.

  • I'm new to Mac, have had for approx.  I put my iPhone and iPad and my wifes in iTunes and now when i start my system on.  I now have a Guest user show up at the log on screen.  Is this normal.  And how can I take it off.   Tried the help and no luck

    I'm new to Mac, have had for approx.  I put my iPhone and iPad and my wifes in iTunes and now when i start my system on.  I now have a Guest user show up at the log on screen.  Is this normal.  And how can I take it off.   Tried the help and no luck

    Tatanka11 wrote:
    I'm new to Mac,...
    Then...  You may find these Links of Interest and Value...
    Show me how to set up my Mac.
    http://www.apple.com/support/mac101/
    http://www.apple.com/support/switch101/     Switching from PC
    http://www.apple.com/findouthow/mac/
    Enjoy your Mac...

  • When i burn videos to a dvd-r disc it works on my macbook but not on a windows/pc or my dvd player. How can i make it work on all the above and not just a mac product?

    when i burn videos to a dvd-r disc it works on my macbook but not on a windows/pc or my dvd player. How can i make it work on all the above and not just a mac product?

    Unfortunately, the recording & movie industry does not respect the rights of the people who make them money, and thus you can only use the paid-for content in ways they see fit. Even if I lived in a bunker where no one else could possibly see the movie I paid for, therefor I'm not 'sharing it illegally', I would still not be allowed in a blue moon to copy that movie to DVD for TV viewing. Someone will tell you to get an AppleTV. How about Apple give us one for free? Until this changes, people wanting to use their content in multiple locations will continue to download music & movies via torrents, legally or illegally.

Maybe you are looking for

  • [SOLVED]Clang and Library Files

    I just installed Clang and it doesn't have the c++ libraries founded yet. These are the directions I have to fix it but I have no idea where it's located. If you intend to work on Clang C++ support, you may need to tell it how to find your C++ standa

  • IP SLA Default Route state down to much

    Hello, I am attempting to use IP SLA trackers to dynamically set the default route going out over a DSL connection.  if the sla trackers are down the default route learned from the WAN will take over, but normally we want to send internet/default rou

  • How to Insert Hastables Into Database Through JDBC

    hi all, I have place the Data from the Hashtables Into the Database.I can place it by Iterating through the Hastables.I would Like to Place the Entire Hashtable Itself Into the Database. Can Any one tell me how? bye.

  • Imovie won't let me open my project nor let me into my project library

    I need to do a trailer for english and I had already started the project. Then when I went to go open iMovie, it looked like this: I tried clicking the project library but it wouldn't budge. I tried all the buttons, shutting down the app/computer, up

  • How do I import MPG video format to iMovie 08?

    I am using a Sony Cybershot DSC-T20 which takes MPG format videos. I understand from previous forum threads that I need to convert MPG to a format acceptable by iMovie 08. One software recommended is MPEG streamline or the DC30 Xact Driver. However,