Can't we display the Extract strucutre of the Master data datasource?
Hi,
when i try to display the data source ( which is master data attribute data source ),
it is not allowing me for the display ( it says : data source xxxx is using the FM yyyy)
Is is that we cannot display the master data data sources?
Any help is highly appreciated
Thanks,
Ravi
Hi Ravi,
ask to get authority on RSA2; you can only display your datasources information form there (you can't change anything).
Alternatively, use RSO2 with your datasource and press enter on the warning message. RSO2 will show you the extract structure name and its function module.
Generic datasources are those created via RSO2. Business content datasources aren't generic! That's why you can't edit them via RSO2 and you get a warning...
Another way to display information displayed in RSA2 is to goto table ROOSOURCE via SE11...
hope this helps...
Olivier.
Message was edited by:
Olivier Cora
Similar Messages
-
Auto display the last data in array
How can I auto display the new data in array without the scroll bar?
If i understand you, you want show last data of array.
You have use property node: IndexVals. You write there indexes of array frome there you want show the data. -
How to find the size of the master data objects in the BW system?
Hi,
We would like to understand the size of the master data tables overall for a specific source system (Logical name is Ex.ABCD, which supplies all master data to BW). Can you please advise the procedure to find out this?
Is there any table that will allows to see all the master data objects related to specific sources system so that we can find out that table size? Thanks.
For example, we have many Texts, Hier & Attributes.
0COUNTRY_TEXT
0REGION_TEXT
0PERSON_ATTR
0MATERIAL_LPRH_HIER
Advance Thanks.
Edited by: BW USA on Feb 2, 2010 10:52 AMHi,
You can find out all the master data tales used in the BW system by
Tcode : SE11
Enter as /BIC/P* for master data tables and press F4 which gives list of master data tables currently used in BW system.
Similarly for Texts /BIC/T* and press F4
Similarly for Hierarchies /BIC/H-* press F4
and can know the size of the all tables.
Thanks,
Gopal -
Master data datasource for the point of delivery and installation.
Hi,
Can any one help me with the Master data datasource for the point of delivery and installation.
Currently i am using ouc_instfacts for installation facts.
With Thanks& Regards,
Shakthi.Hi Shakti,
I guess you are asking for assignment of installation to POD (table euiinstln)?
Then you should check 0UC_PODINST_ATTR.
Best regards
Harald -
Can we Read/Display the content of Word/PDF file in Flex 3/4 ?
Hello All,
Can we read/display the content of Word/PDF file in Flex 3 or Flex 4?. I have one word file containing Arabic and English content with some settings like Bold, Color, Align etc. I want to display the content of this word file as it is in the flex web application.
Awaiting for prompt reply.
Thanks and Regardsthank you for your immediate reply, but,
sorry, this does not work.
With this code:
<cfpdf action = "read" source = "dok_1.pdf" name =
"mypdf">
<cfdump var="#mypdf#"/>
I get this result:
Everything, but no text of the document.
PDFDocument
Application name of application
Author bimbam Verlag GmbH
CenterWindowOnScreen [empty string]
ChangingDocument Allowed
Commenting Allowed
ContentExtraction Allowed
CopyContent Allowed
Created D:20080710
DocumentAssembly Allowed
Encryption No Security
FilePath [empty string]
FillingForm Allowed
FitToWindow [empty string]
HideMenubar [empty string]
HideToolbar [empty string]
HideWindowUI [empty string]
Keywords [empty string]
Language [empty string]
Modified [empty string]
PageLayout SinglePage
Printing Allowed
Producer [empty string]
Properties [empty string]
Secure Allowed
ShowDocumentsOption [empty string]
ShowWindowsOption [empty string]
Signing Allowed
Subject [empty string]
Title Rheinische Angler-Zeitschrift
TotalPages 1
Trapped [empty string]
Version 1.3
Maybe i do not understand the cfpdf tag the right way.
What i want is a kind of pdf-to-text conversion.
Do I have to use the processddx action? I do not think so.
But there is a property DocumentText .. ? -
how I can do to display the comments of the cells in an Excel spreadsheet? I have an iPhone (4S) and use the application Numbers
I would write a LabVIEW VI to read the Excel file(s) on computer n°1 and publish the data in a shared variable over the network.
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left... -
How can i air display the Screen from mac to the more than 3 iPads?
how can i air display the Screen from mac to the more than 3 iPads?
thanksEnergy Saver, you can keep the computer awake while the screen saver shuts the monitor off but I'm not sure that would do it for you.
-
Report that can display the installation date of an application or program
Hi,
Would like to ask if anyone knows a built-in report in SCCM 2012 that can display the installation date of an application or program, either it was through deployment with SCCM or through manual installation?
Thanks in advance!Got this to give me the report that I wanted but eliminating some entry on the SQL Query that
Peter van der Woude gave. Here's the Query I used to display the computer name, name of software, date of installation and day since installation of the software.
SELECT TOP (100) PERCENT
dbo.v_R_System.Name0,
dbo.v_GS_ADD_REMOVE_PROGRAMS.DisplayName0,
dbo.v_GS_ADD_REMOVE_PROGRAMS.InstallDate0,
DATEDIFF(Day, CONVERT(date,dbo.v_GS_ADD_REMOVE_PROGRAMS.InstallDate0), GETDATE()) AS [days since installed]
FROM
dbo.v_R_System INNER JOIN
dbo.v_GS_ADD_REMOVE_PROGRAMS ON
dbo.v_R_System.ResourceID = dbo.v_GS_ADD_REMOVE_PROGRAMS.ResourceID
WHERE
(SELECT ISDATE(dbo.v_GS_ADD_REMOVE_PROGRAMS.InstallDate0)) = 1
GROUP BY
dbo.v_R_System.Name0,
dbo.v_GS_ADD_REMOVE_PROGRAMS.DisplayName0,
dbo.v_GS_ADD_REMOVE_PROGRAMS.InstallDate0,
DATEDIFF(Day, CONVERT(date,dbo.v_GS_ADD_REMOVE_PROGRAMS.InstallDate0), GETDATE())
Thanks
Peter van der Woude! -
How can I display the CREATED date of an acrobat file in Windows Explorer (Win 7)?
I want to display the Created date is shown in Document Properties in Windows Explorer, here's the field I want to see in Explorer:
Try this pdf file, the help file from this page:
https://helpx.adobe.com/acrobat.html
Download this file and see what you see in Windows Exploer
http://helpx.adobe.com/en/pdf/acrobat_reference.pdf
Compare dates on the Internal Acrobat Properties and those displayed in Windows Explorer:
Here's what Windows Says: -
TO Display the row data as column in ALV
Hi experts ,
Need to display the row data in ALV as column.
The column of an ALV has the fieldnames of a table , this needs to be displayed as row data , that is as single row.
How can this can be achieved?Hi,
Actually it is not possible to disaply in multiple lines.
https://www.sdn.sap.com/sdn/collaboration.sdn?contenttype=url&content=https%3A//forums.sdn.sap.com/thread.jspa%3FforumID%3D50%26threadID%3D49517%26messageID%3D506378%23506378
https://www.sdn.sap.com/sdn/collaboration.sdn?contenttype=url&content=https%3A//forums.sdn.sap.com/thread.jspa%3FforumID%3D50%26threadID%3D41133%26messageID%3D403371%23403371
This problem was discussed many times in this forum, u can search for more results. -
Open hub Services - How to extract the master data related to a object ?
Hi Gurus,
I am implementing OpenHub services for our project, it's on BW 3.5, I have the list of required fields with which I am creating an InfoSpoke. Now I am stuck in some the info objects which are having master data associated with it.
Example : Business partner(BP) data, when I map the 0BP infobjects in infospoke it's extracting the BP ID (ex: CT065316,CT068638 etc) in flat file but I want the BP name, address & telephone number as well, which are coming from master data table. But I am able to map only 0BP infobjects as a part of ODS/Cube.
Can any one tell me how to get the master data extracted in the flat file with associated info object???
Answers will be highly appreciated.
Regards,
Kironmoy Banerjee
Edited by: Kironmoy Banerjee on Oct 1, 2009 3:34 PMHi Kironmay
Please follow the below mentioned procedure to create a transformation. This is applicable for BW 3.5 as well.
- Enter your infospoke in the edit mode.
- On the Transformation tab set the indicator for the Infospoke with Transformation with BADI so that the infospoke is activated.
- This will take you to the Addin implementation/BADI builder.
- Enter the short text/description for the implementation. The implementation name is always the same as the technical name of the infospoke
- The implementation of the BADI is always filter dependant.
- In the properties tab of the infospoke enter your infospoke under the Filter specifications.
If you do not specify an InfoSpoke under Filter Specifications, then this implementation is valid for all InfoSpokes. This means that this is called up for all InfoSpokes during the extraction.
- Activate your class
- From your interface tab page, double click on the Transofrm Method and you will arrive in the class builder page
- Here you can enter the code
- To do a look up of the master data you have to write a code similar to the one I've given below. This is just an example for looking up material master.
IF FLT_VAL = 'Your infospoke'.
T_DATA_IN[] = I_T_DATA_IN[].
Select zstd_cost from /bi0/pmaterial into table T_return
For all entries in T_DATA_IN
WHERE material = T_DATA_IN-material.
...Continue with your code.
Append output from T_return to your output E_T_DATA_OUT
- Activate your method. Return to the BAdI builder. Return to your InfoSpoke.
I hope this helps.
Thanks. -
Gorgeous Hello All,
Has anyone encountered the below-said show- stopper. Another BIG TIME help required, will help me in tremendous fashion.
Am using Adobe RoboHelp, Version 10 and IE version being 10.
In my local machine :
1.)I have completed my technical writing courtesy Design editor
2.)Generating chm File : View -> Pods –> Single Source Layouts -> Right Click on Microsoft HTML Help -> Tagged Set as Primary Layout
3.)Generating Primary Layout : File -> Generate -> Primary Layout (Microsoft HTML Help)…
4.)Viewing Primary Layout : File -> View -> Primary Layout
Everything works FANTASTICALLY till here with the required output (as Hide, Back, Refresh, Home, Print, Options, Contents, Index, Search, Glossary and with the data contents)
Show Stopper, At my Application Server :
5.)I copy the entire robohelp project folder from my local machine to my application Server path
6.)My Application has been developed in ASP .NET, Version 4.0.
7.)Help link has been created in this application wherein here the file name of < >.chm has been linked in the code to be read from the Server’s RoboHelp project folder\!SSL!\ Microsoft_HTML_Help\
8.)I login into my above-said application -> click on the Help page -> Displays the required structure /buttons as Hide, Back, Refresh, Home, Print, Options, Contents, Index, Search, Glossary
a.)Clicking on any of the Books or Topics appearing beneath Contents : The System prompts out with error cautionary message called “ Navigation to the webpage was cancelled. What you can try: Retype the address ”
*** This is a huge SHOW-STOPPER. I spent plenty of hours on this, but unable to deciper with a solution at all) ***
( Note : Am able to directly open and read the required data contents by Clicking on any of the Books or Topics appearing beneath Contents from Server’s RoboHelp project folder\!SSL!\ Microsoft_HTML_Help\ < >.chm )
Why is the RoboHelp not displaying the required data contents of <>.chm when linked as Help in my Application ?
Cheese – Vipin NambiarIf you looked at the error message and searched the forum, you should find the answer as this is a problem that started in 2005. You should not run CHM files from a server and cannot without editing the users registry. See the page below.
http://www.grainge.org/pages/authoring/chm_mspatch/896358.htm
All along your questions have been based on webhelp, why suddenly are we going go CHMs.
See Snippets on my site for the correct form of help to use in different scenarios.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge -
How to display the current date in Flex app
I need to display the current date in my Flex application. Is there a simple way to do this and display it as a label or text field? Also, can this be formatted to display the date as "Day of Week, Month Day, Year"?
Thanks!You can use this code and this page to tweak the formatString property.
http://livedocs.adobe.com/flex/3/langref/mx/formatters/DateFormatter.html#formatString
If this post answers your question or helps, please mark it as such.
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
creationComplete="init();">
<mx:Script>
<![CDATA[
[Bindable] private var date:String;
private function init():void{
date = new Date().toString();
date = df.format(date);
]]>
</mx:Script>
<mx:DateFormatter id="df" formatString="EEEE, MMMM D, YYYY"/>
<mx:Label text="{date}"/>
</mx:Application> -
How to display the Current Date on page using ADF Components
Hi,
Is there any way to display the system date on a page developed using ADF Components.
I am thinking of writing the java code to display the date. Just wanted to check is there any pre-defined component of ADF that I can make use of.
Could anyone tell me how to do this using ADF components?
Thanks in advance.
Sivaji....Please refer the below link.
Prompt with default date ( currentdate-1 and current date-8)
http://www.dagira.com/2008/07/15/how-can-i-make-today-my-default-prompt-value/
http://www.dagira.com/2008/07/21/using-a-magic-date-value-in-prompts/
Regards,
Bilahari -
How to display the current date witout chane anyone
Hi all
I have some problem in date field.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS : S_INDATE TYPE SY-DATUM DEFAULT SY-DATUM.
SELECTION-SCREEN END OF BLOCK B1 .
This the code of selection screens. Normally default it will display the current date. But in my program it can change the user but I want to display the date and it cant be the change anybody.. How should I do it ??????????
Regards,
nawahi ,
Chk this.
SELECT-OPTIONS : s_kunnr for kna1-kunnr.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
if (SCREEN-NAME EQ 'S_KUNNR-HIGH') OR (SCREEN- NAME EQ 'S_KUNNR-LOW').
SCREEN-input = 0.
MODIFY SCREEN.
ENDLOOP.
Rgds
Anver
Maybe you are looking for
-
3D Text with Repoussé in Adobe Photoshop CS5 Extended | CSInsider | Design | Adobe TV
In this episode of CSInsider, Rufus Deuchler, Worldwide Design Evangelist at Adobe, introduces you to how easily you can extrude text in Adobe Photoshop CS5 Extended to create fully fledged 3D objects. These 3D objects can then be rendered using Phot
-
Controlling background width/height in 3.5
Hello all, I'm stuck on a problem I've been trying to solve in 3.5. I've seen a few solutions in 4.0 and above, but that doesn't help my situation. I want the application background image to maintain its aspect ratio, while still being as large as p
-
Hi all, (please forgive my English) Versions : Itunes : 11.0.1 (12) 64bits Mac OSX : 10.8.2 (Mountain Lion) I discovered new mp3 do appear in Itunes playlist (recently added songs playlist) but do not appear in the main song list (songs/artist/album
-
Sequence consists of footage from 3 dslr cameras and 3 seperate sound sources. Sent to PEyes3.3 via extentions. Synched perfect when played in PEyes but when exported back to prem pro the 3 sound sources are almost in synch. The video tracks are seem
-
Solution For Microphone - Low Volume or Not Working
I just read pages of forum discussions trying to fix extremely poor microphone volume on my Macbook Air. I tried to change all kinds of microphone settings, doing hardware resets, and uninstalling software. I even made an appointment to the Genius Ba