Can't Web Browse to 6900 series phones running firmware 9.4.1.3 on cisco CME

Hi
I'm having issues with web browseing to cisco IP phones. 
Historically we could web browse to a a basic settings/ dianostics page of the phone by simiply browseing to the phones IP address. 
However after an upgrade to SCCP firmware 9.4.1.3 this is no longer possible? I have tested from the same lan/subnet but still it refuses connections. Did a telnet using port 80 and this is also refused. 
Was this feature removed in the later firmware? I have always found this feature usful especially when doing degugging and remote testing. 
If it is still possible to web to them does anyone know how this is enabled. I'm searching around but not found a solution yet. 
Thanks
Simon

I think web access disabled by default started in 9.3(3) for these phone models:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/6900_series/firmware/933/release_notes/P069_BK_R9A78776_00_rn-9_3_3-6900-series/P069_BK_R9A78776_00_rn-9_3_3-6900-series_chapter_00.html#P690_TP_WC33699B_00

Similar Messages

  • No Optimized web browser support on basic phones after 8/30/13?

    Over the weekend I received a very disturbing message on my web browser. of my Samsung Gusto 2. It said that there would be no Optimized  web browser support on basic phones after 8/30/13 and that if I wanted a good web browsing experience that I would have to upgrade to a smartphone. I am on the $50 unilmited talk,text,and web prepay plan  but don'\t want to get stuck paying for a web browser I can't use after that date.A smartphone monthly plan would cost $10-20 more monthly,in addition to spending considerably more to buy a smartphone. I already have a tablet and was told a smartphone was unnecessary. Anybody else get this message?One person in customer service said that it was propaganda and not to believe it. Another person that I called later found the memo but had no further information on it at this time. Aparently Verizon likes to keep their customer service associates in the dark until last minute.No idea if they will alter their price plans in light of this development. I currently have AT&T U-Verse and will move my number to them and switch providers if forced to.They are willing to offer the same plan I currently have with Verizon but will have to buy a new  AT&T GoPhone.  Have had pretty good customer service with them up to now,but they are not open 24/7 for wireless customer service. Any comments?

    Hi Melissa
    Right now I am switching  back and forth between the Samsung Gusto 2 and the original Gusto. The reason I am doing this is because the Gusto ,even though it is an older phone, is in much better condition than the newer Gusto2. I want to use the beat-up Gusto2 for work, and  switch to the other phone when I need a more presentable phone.Also have  a Verizon Wireless CDM 7076(somewhere).
    Don't know why I am being forced to replace perfectly good phones. And yes,SydneyK, I could use my tablet for data,but it is a little cumbersome to take it out with me,but don't need it for my work . I just took it out for the first time recently to see how well it works on Wi-Fi hotspots(I don't have or want a data plan).Because I am a U-verse customer,I have access to 30,000 AT&T Wi-Fi hotspots AT NO ADDITIONAL CHARGE. I don't want to pay for something (web access)that I can't use on this phone. If Verizon can't give me cost-effective solutions,then I will be forced to transfer my number to AT&T Wireless as of August 30 for a GoPhone. AT&T wants my business and are wiling to do anything to satisfy me. Haven't had any trouble with Verizon either. Yes,  their customer service is still available 24/7 even thought you will have to wait a while sonetimes. I just hate the thought of having to go through the hassle of transferring my number to another carrier.
    Marc

  • I have bought Iphone 4 in UK and unlocked it normally and bought to india . I have then updated to IOS 5 . its working properly . Now i want to update to IOS 6 . Can i do it without geting locked . phone modem firmware is 04.12.01

    I have bought Iphone 4 in UK and unlocked it normally and bought to india . I have then updated to IOS 5 . its working properly . Now i want to update to IOS 6 . Can i do it without geting locked . phone modem firmware is 04.12.01

    followed someones instructions and it has worked ios 5 is now working on my iphone 4

  • How to open a web browser from an windows phone app

    Hi everyone,
    I am pretty new to Windows Phone 7, and now what I am trying to do is to create a simple app. When a user click to start this app, a browser will open and show the content of a webpage from a specific address.
    I tried to use a webbrowser object, but it seems like that doesn't sport cookies. So I need my app to open a real web browser (maybe IE mobile) to do the job.
    Thank you.

    copying from stackoverflow: "If you want to embed a browser window inside your application then use  the WebBrowser control.  Add an instance of the WebBrowser control to  your form then you can reference it in code using the name you
    give  it.  (Default name is "webBrowser1")"
    Microsoft MVP J# 2004-2010, Borland Spirit of Delphi 2001

  • Can't WeB-browse my Local Network (lan)

    I everybody, I have a kind of weird problem here....
    well here are the facts:
    -I'm using the vlan-tagging capabilities of linux to manage a vlan-switshing network (802.1q).
    -The las wek I lost my hard disk and reinstall all over again
    -I'm using a native tag to reach the internet network and natural o normal tag to manage the rest of the network (this is the only diference with the last time). Before I was use only tagging for everithing.
    Ok here is the weird...
    - I can see my hosts by ping, all of tem (and telnet and ssh)
    - I can NOT browse any host connected to my sub-net
    - Everybody else (normal window or linux connections) can do
    - I can browse the web servers of the ones with another interfaces on internet and passing trough a gateway
    - and I can reach the internet (obiusly)
    My iptables are clean, and tcpwrappers are clean to...
    Anyone can tellme what is wrong
    PD: sorry 4 the Bad english---
    thanks
    kCO.

    I was talking about WEB bowsing.... Don't even try smb...  I don't event figure out that.....
    anyway I SOLVE THE PROBLEM thanks a lot.....
    The problem was my NIC card (integrated one), maybe is not full compatible with VLANs, allways use the other one (DLINK) and when reinstall the kernel just change the order so I just chage the cable.....
    Now I'm back on my way.... The Hi-Way, the ArchWay
    kCO

  • Can skyfire web browser be used using 3G?

    I want to watch flash videos and play games in my iPad!

    Hi Ben,
    Skyfire supports Flash video, but does not support interative Flash games or Flash apps.
    Skyfire does work over 3G as well as 4G and WiFi.

  • Do you need a web browser and internet server to run LabVIEW remote front panel?

    Does anyone know if ones needs an internet server to use the Remote Front Panel application of LabVIEW, or is it also possible to use a LAN/WAN for the same application?  if it is possible, how does one set up such a system?

    You can do this on any IP based system (which includes LANs).
    Basically, you need to be able to ping the server and to have the RFP port allowed in the firewall.
    Then you need to enable the option in the application. If this is an executable, you will need to configure this in the Options dialog or copy some lines from the LabVIEW.ini file into your EXE's INI file. You will also need to take the htm file created by the publishing wizard and make sure it points to your VI and that it is located in a place where it can be accessed from outside the server (read the LV help or search the site for more on this).
    Then, you just need to enter the URL for that htm file in the browser on the client (e.g. 192.3.42.5/c/rfp.htm) and it should load.
    Try to take over the world!

  • 822 uploading images via web browser

    I can not seem to upload pictures to websites via the web browser, is this a phone/os issue like with the Iphone before the lastest OS update? or is there possibly another issue maybe with it being something to do with the browser or where I have images saved? 

    WP8 does not have a built-in file manager, so that may be the cause of your issues. are you even able to see the folders such as Camera Roll, Saved Pictures etc?

  • Display PDF in Web Browser Setting

    Good Morning,
    We recently encountered some issues with Adobe 9.0.0 on Citrix servers. We updated to Version 9.3.4, since we had not fully tested Reader X yet.
    The issue is that we have an application that calls to Adobe and opens PDF files within the application.  When I log on to the citrix server locally, the setting Display in PDF Browser is selected.  My account is an admin of our domain. When I log in to the server with a standard account, the setting is not selected.
    I found the bBrowsing Integration key in HKCU\Software\Adobe\Acrobate Reader\9.0\Originals and when I am logged in with admin account it is set to 1, when I login with the non-admin account it is set to 0.
    The same key also appears in HKEY_Users\.Default\Software\Adobe\Acrobat Reader\9.0\Originals.  My question is this, can I set this globally on my Citrix servers so that the Display PDF is Browser is selected. when users login to Citrix Presentation Server, launch the applications that call to Adobe, that the pdf open in a web browsers of the applications. Currently, if you hit the link the PDF file will open in its own window.
    Sorry if this is a bit wordy, but I figure it is best to give too much info as opposed to not enough.
    Thank You
    Brian Dougherty

    Yes the pdf is opening in adobe. But I don't want to open a new adobe browser to open.
    I want to display in the current web browser where my application is running.
    eg. if u are embedding pdf file like this.
    <EMBED src="temp1.pdf" width ="750" height="550"></EMBED>
    It won't open the new window. It displays the result in the current window.
    I have my pdf content in byte array. To wirte the above code i need a file. I even writes the byte array to a temporary pdf file. But I can't able to import that file dynamically to the WSAD workspace.
    Is there any other way to embed the (byte array)pdf file in the current window.
    Please advice me.
    Thanks in advance.

  • Signing a pdf in web browser

    I am setting up a web application where a person can open a PDF in their browser and sign a signature field in a PDF form.  Once they sign it they can click a submit button in the PDF form and it submits the form data via HTTP (not FDF or XFDF).
    They can sign it, but when the form is submitted back to the web server the signature data is not part of the form data.
    Is there any way to get the signature data in the form data that the PDF is sending?
    Thanks!

    Yes the pdf is opening in adobe. But I don't want to open a new adobe browser to open.
    I want to display in the current web browser where my application is running.
    eg. if u are embedding pdf file like this.
    <EMBED src="temp1.pdf" width ="750" height="550"></EMBED>
    It won't open the new window. It displays the result in the current window.
    I have my pdf content in byte array. To wirte the above code i need a file. I even writes the byte array to a temporary pdf file. But I can't able to import that file dynamically to the WSAD workspace.
    Is there any other way to embed the (byte array)pdf file in the current window.
    Please advice me.
    Thanks in advance.

  • Pdf in web browser

    Hi
    can anybody tell me how to display a pdf file in a current web browser where my code is running.
    my pdf file is in byte array format.
    i already tried <embd>
    Thanks in Advance.

    Yes the pdf is opening in adobe. But I don't want to open a new adobe browser to open.
    I want to display in the current web browser where my application is running.
    eg. if u are embedding pdf file like this.
    <EMBED src="temp1.pdf" width ="750" height="550"></EMBED>
    It won't open the new window. It displays the result in the current window.
    I have my pdf content in byte array. To wirte the above code i need a file. I even writes the byte array to a temporary pdf file. But I can't able to import that file dynamically to the WSAD workspace.
    Is there any other way to embed the (byte array)pdf file in the current window.
    Please advice me.
    Thanks in advance.

  • How do i relate my java program to web browser?

    hi..
    when i visit a website with any web browser, can i let my java program download the page automatically?(and it's going to do something with the pages)
    thank you in advance

    50 lines of java can make web browser?
    i'm serious..
    how can i make a something like "cookie or history file" integrated in web browser?
    should i look at source code of browser application? or
    it can be achieved just placing my program on top of browser application?..
    one simple example could be..
    retyping a word in a html form every 1hour..
    is this impossible?
    thank you

  • Web Browser error message

    When I try to log into Web Acess I receive and error that states that "Your web browser is configured not to run script or doesn't support script in Web pages. Check your browser settings  or use a browser that can run script."
    What do I do??? My employer is the State of Virginia so they do not allow email to be downloaded to a Blackberry due to security of content concerns....so the only way I know of to get to my email is to go through web access.
    Thanks!

    Your browser does not support scripts.
    Try to install and use OperaMini browser.
    It is free.
    You can get it here: http://www.operamini.com
    Message Edited by tbilisoft on 12-02-2008 07:09 AM

  • No Web Browser

    There is no web browser currently on my phone.

    Ok,
    Now try to resend your service books.  Go to Email settings>Press the menu key and select Service Books and select Send Service Books.  See if that gets you going.
    Doc

  • E Series and Skyfire web browser

    I have tested a couple of phones with flash video sites like veoh.com.  I had the chance to test  E66 with skyfire. The installation of Skyfire was quick and easy.   Just go to skyfire.com using your phone's regular web browser  and pick up  Skyfire 1.5 for Nokia /Symbian and you will be redirected to Nokia's Ovi.
    After a few clicks the skyfire was set up and running. Voila! All videos of veoh were playing perfectly. No crashes and  no more  the message you need the latest flash!!!
    However, what I have heard and read not all Nokia phones work well or at all with skyfire web browser. For my C5-00 it's impossible to install the skyfire browser despite the fact that :
    Skyfire is now available for Nokia Series 60, 3rd & 5th Edition mobiles via the Ovi Store!
    http://store.ovi.com/content/2178?lang=en
    Perhaps it's a good idea to share  your experiences with other Nokia phones (E Series here)
    how they are capable of handling flash video sites. There is huge amount of great video and movie sites available on the net. If Skyfire can help you watch your favorit movies or tv-shows it's definetely worth trying.  Unfortunately I can't say if veoh.com works does it mean that all flash sites works too. One more site which came to my mind is hulu.com
    And naturally the father of all flash site is adobe.com.
    http://www.adobe.com/support/flashplayer/
    How funny: there is no mention how to get flash for your Symbian phones. Now when Nokia has got a new flash specialist in their team from Canada, perhaps he can solve the flash puzzle with Adobe and add instructions to Adobe Support page. It's not up to us customers to solve these things.
    But as it looks the Nokia bosses are too busy, we customers must go on with testing..
    Btw, The  spell checker does not know words Nokia, Symbian.... Does it learn anything...hardly
    A tip for Skyfire users: Click the navi button of your phone twice to zoom in
    (the button in the middle of the phone)

    worth reading it thanks man!
    sMhsn

Maybe you are looking for

  • Performance Issue when turning on Retention Policy

    Hello, I am currently in the process of enabling retention policy for my organization. We have 18,000+ mailboxes. How much of a performance impact (if any) will it be to the end users if we were to enable retention polices for so many mailboxes at on

  • Managing Oracle 9i On Linux Redhat AS

    Hi All, Can someone provide me document references for managing oracle9i on linux redhat. Thanks in advance.

  • Problem in using the shift Register

    I have a problem regarding shift register when i was using it in my application. During the runing of the application i found that sometime shift register not pass the value to the case structure. at that time result is not displayed. i have attached

  • Auto discovered Linux machines platform value is showing as Windows. Need help

    Hi All, In my infra, we have set the discovery policy as AD & IP range. All the machines are getting discovered, however in platform tab of Unix/Linux machines shows as 'Windows', and due to this we are unable to license the machines. Please help. Re

  • Address Book always chooses 5th for birthdate to display

    Hi, I use MobileMe to sync my iMac at home and my MBP at work, as well as my iPhone. All work fine, except recently the MBP. In the Address Book for it, when I type a birth date for a contact, regardless of what I type, the day portion of the field a