Can't write automation with anything but the mouse on the track
I just upgraded to logic studio and now I can't write automation. I click and drag the volume bar on the channel strip, the playback volume goes up, but the automation line does not change. In touch, latch or write modes this occurs. I noticed the problem with my behringer bcf2000, but it happens even when I disconnect the hardware and just use the mouse. The only way I can adjust the automation is to use the mouse in the horizontal track and adjust the lines. I hope there is some simple toggle I need to click to re-enable this. Can anyone help me please? I do not have this problem in logic pro 7
Hi there!
I had the same problem, - and found the same answer, - but now I find that the "Write automation for: Volume" checkbox actually unchecks itself... I check it and forget about it but when I come back later in the process to change the volume automation I find it unchecked. This only happens to the volume checkbox though. Any ideas why?
Similar Messages
-
I used a Disc Warrior repair disc to rebuild by G4 Power Mac hard drive. It wouldn't
startup using the disc and the C key so I selected the Warrior as my startup disc, started up, repaired the disc and now I can't get the computer to startup on it's hard drive. It will only startup on the repair disc. What do I do to get back to normal?Press the Option key at startup and select the hard disk.
(60933) -
I bought apple tv thinkng it would save me from my college life of not being able to have cable but it has cost more of a problem Be
ause my campus is so large we have passwords to log into our network. When I called the tech people they siad if i had the apple number they would be able to connect it to the network without a password. I tought this was the source of my problem because i can not connect to the server because it is not loging in to my apple id and password that is my itunes account. I have checked it multiple times and thats not the problem. The other problem is I can not find the apple number the tech was describing to connect it to the network. Does anyone know the answers to my problems? Im a college student in dire need of tv!Hi,
I imagine he means "encrypted wireless.
I'm a little confused about what the IT guy wants. If your campus has a wireless network and others with laptops etc can connect to it them you should also be able to with the Apple TV. It seems to me that the campus IT guy needs to give you the name of the wireless network (SSID) and a password so you can connect.
Then go to Apple TV General/Network/Configure Wi-fi and follow instructions. The IT person should tell you what encryption they use WEP, WPA, WPA2 etc. Probably WPA2. You'll need this infor to connect.
Then go to
Apple TV General/Network/Configure TCP/IP and you will probably tell it to use DHCP and it should connect you to the campus network.
After that you can sign into the iTunes store etc.
Or am I missing something here?
Pat. -
I bought the external DVD player/burner for my Macbook. I tried using it with my Dell laptop but it will not work. Is it not configured to work with anything but apple operating systems?
If you purchased the Apple USB SuperDrive, it will only work with select Apple devices. It won't work, for example, on my Late 2011 model that has a SuperDrive built-in, but it will work with an Air, Retina model, new 'drive-less' iMacs, etc.
As far as I know, though, you can only hack the drive to work with some other Apple devices, but not with Windows PCs. Which is a shame as other, less expensive DVD/CD devices will work with just about any machine.
Sorry,
Clinton -
No sound for incoming calls but it works using speaker and earpiece. I can't hear anything but the other party can hear me clearly. I was told it's hardware problem. Would anyone please help me? Thanks
This is an annoying problem for many people. Most likely your dock connector (on the bottom where you plug in your phone) is dirty or screwed up and is probably just coincidence that it happened after you updated. Some people have had success cleaning the port with a dry clean tooth brush. There is a long discussion going on at the thread I linked below. Good luck...
https://discussions.apple.com/thread/2475631 -
I can't number pages starting with anything but 1.
I edit a newsletter for a non-profit using Pages in iWork. The pages have to be numbered consecutively through the year....the first issue begins with 1, the second begins with 17, etc. But I can't get the auto page numbers to start with anything but 1 and then number the rest correctly. If I click on Start With in "Section" and input, say, 49, nothing changes. If I input the numbers on each page manually, they are just as likely to change as I go. (I number the 1st 49, the second 50,...and suddenly the first now reads 50.) What am I doing wrong? Thanks.
Inspector > Layout > Section > Page Numbers > Continue from previous section/Start at:
Peter -
How come iMac can see my iPhone with iPhoto but cannot syncronize it with iTunes? Maybe need an update version? As a matter of fact iTunes version on iMac is a 10.4 and in iPhone I get a 10.6: the iMac is brand new since I just come from a pc. Thanks
Hi ...
see Pmy iPhone with iPhoto but cannot recognnized with iTunes?
Try this support article > iOS: Device not recognized in iTunes for Mac OS X -
hi my bluetooth cannot see the other bluetooth devices. When it is picked up by a different device tries to pair with it but the pairing does not occur. what can I do apart from throwing this **** thing in the bin?
It isn't supposed to pair with the MacBook. You can use WiFi to connect but not Bluetooth. You can setup a personal HotSpot on the iPhone and connect the MacBook, or setup the MacBook AirPort to create a network and attach the iPhone, and use the USB cable to connect the iPhone to the MacBook for syncing and backup purposes.
The communications are rather limited. -
Hi I have a iPhone 4 and I seem to have a problem during calls. If I make or receive a call I can hear the person who is on the line with me but the other person can't hear me. This problem has occurred 1 week ago so please get back thank you
You use Restore to get the latest firmware build, not the Update button. You can only use the Update button, if there is an iOS update, say iOS 5.1.
this link talks about updating to 9A406 to fix the "No Service" issue with iPhone 4S:
http://iphone-and-i.blogspot.com/2011/12/fixing-iphone-4s-signal-problem.html -
Clicking on Microsoft Update opened Firefox, but Microsoft Update couldn't run from Firefox; when I closed Firefox I lost all my tabs and couldn't restore anything but the Microsoft page; how can I restore the tabs from an earlier session?
Hi Diovizor,
Make sure that you do not use [http://support.mozilla.org/en-US/kb/Clear%20Recent%20History Clear Recent History] to clear the 'Browsing History' when you close Firefox.
Also please make sure that you not run Firefox in (permanent) Private Browsing mode.
You enter Private Browsing mode if you select: Preferences > Privacy > History: Firefox will: "Never Remember History"
To see all History and Cookie settings, choose: Preferences > Privacy > History: Firefox will: Use custome settings for history. Uncheck "Always use permanent Private Browsing mode"
Hope that helps! -
I am receiving excel files, which I need to convert with my macbook pro...I did this with export, but the file I got didnt show graphs as it should...can you help...do I need to buy excel for Apple computer, or is there any easier way of dealing with it..does App "Numbers" help here?
Numbers should be able to read Excel files without any problems. If Numbers does not read the graphics properly then you can try Excel Online. https://office.live.com/start/Excel.aspx
-
I have a Yamaha FC7 foot pedal and am trying to use it as a whammy bar type controller. Can I do this with anything in Mainstage? I also have Line 6 Pod farm 2 - anything in there?
The foot pedal also seems to have an on/off switch that activates when it's depressed all the way. How do I set that up in Mainstage? Can I cycle between and effect and a volume pedal, for example?
Mainstage version is 2.1.3
Thanks for all help given.Hi
Bruno Filipe wrote:
Thanks for the help but please don´t duplicate the answers. I´ve explain that to Chamie7
Noted, except that the OP clearly did not feel that your answer was helpful
Chamie7 wrote:
Sorry, no help there. Any guitar players know what I mean?
and
Bruno Filipe wrote:
You can use a keyboard or other controller (with jack like sustain) and then assign controller (normally 64) to what you want Mainstage to do.
This is unlikely to work if you plug an "Expression Pedal" such as an FC7 into a "Sustain Pedal" socket using MIDI CC64, which usually operates as a switch rather than a continuously variable value.
If I understood the OP's request correctly, the OP wanted to use the FC7 as a "Whammy Pedal", which does a PitchBend 'dive' effect (amongst other things)
http://en.wikipedia.org/wiki/DigiTech_Whammy
CCT -
my ipod tells me my apple id password is wrong even though I just changed the password. I can log on via my desktop, but the ipod continues to tell me that the password is incorrect, so I can't update any apps. when I continue to to try to enter the correct password in it finally freezes the account, and I have to go online via my desktop to fix that problem. I have two apple id's because when my ipod crashed I had to reset it completely. I have never had any problems with this before, and it has been a year since I got my second id, which is linked to the ipod. My first id is used for the cloud on the same device. My wife suggested I reset documentson the cloud for the second id, however, when I try to log on the cloud with my current id, it tells me I have to set up the cloud on that device, but it is already done, but with the old id.
confusing I know. I have been on the 'change your password merry-go-round' all day, and I'm getting dizzy! Help!Then contact iTunes:
Apple - Support - iTunes - Contact Us -
I just got a new MacBook Pro, and I tried to bring across my files from my last mac using time machine. After it was done copying I can't find my files anywhere but the space (about 130gb) has been used on my hard drive. Does anyone know how I can get to them? I did change my user name from 'user' while it was copying, could this have something to do with it?
You don't want to do that by copying.
Your best bet, by far, is to use Setup Assistant. If your Mac is running Snow Leopard, see Using Setup Assistant on Snow Leopard or Leopard.
If it came with Lion, it's a bit different: Using Setup Assistant on Lion -
I am traveling in Chile, South America. I purchased an Entel sym card and I can make and receive phone calls, but the internet only works on WiFi. Do I need to region unlock or what? I willl only be here for A month and a half so I don't want to buy a phone. Any suggestions?
Most of the current Apple Intel based computers are comparable in CPU speed. I don't think it is so much the model of laptop as it is the memory, and storage capacity of the machine. If you are going to use FCP on a regular basis, perhaps as a professional or semi-professional, then you should think about the maximum memory and a very large capacity internal disk drive. For instance, one hour of finished compressed video will take up about 1.5 to 2Gbytes of disk space. If you add up the raw footage and still imagery and audio, you'll use up your disk drive capacity real quick. So a hard disk on the order of 750Gbytes @ 7200rpms might be good for video editing. 5400RPMs might be slow to rendering times. Rendering a video might take up a lot of memory so more memory is better e.g. 8Gbytes.
As a rule of thumb, once you get to about 80% of your disk drive or memory you'll see degradation of performance.
You can check out macsales.com. THey have a menu system that will allow you to pick and choose from various alternatives. BTW, it's been said that although Macs are typically spec'd at a certain memory size, macsales.com found that Apple computers will actually support higher memory levels. That is, if 4Gbytes are spec'd, some machines support 6Gbytes. macsales.com will provide the guidance for you.
You might also consider buying an external disk e.g. 500Gbytes to carry around with you for back-up or transport to another machine.
Maybe you are looking for
-
HTTP/S connection to the SAP System failed
Dear SDN, I am trying to connect my EP System (Enterprise Portal 6.0 SP 15) to MMSCMDEV System(SCM 4.0 Development System). Please note SCM 4.0 has external ITS on server MMLCADEV (both are in same network). EP is in different domain. User Mapping ha
-
Excel-document's book size format after downloading
Dear forumers, we have developed a user report in ABAP, this report downloads table containing data into Excel. The problem is that the downloaded table is wide and the page format in Excel-document is broad size as default. We need the system to dow
-
Hi, I have created new WDJ DC project in MSS Component e.g mss/transfer using the same track. My Project is working fine without any issues, no build errors or no activation errors. Now i'm trying to release this project but i not able to do that. Af
-
ITunes Producer app. How long after book delivery?
What's the average time it takes for a book to show up on iBooks after it's been delivered via the iTunes Producer app? Does anyone know? Thanks!
-
I'm using Windows XP, the original iPod, and iTunes 6. Everytime I try to change my iPod's name, it tells me that it's "Updating, do not disconnect". Then, after a while, it changes the name. But when I eject, then disconnect my iPod's name didn't ch