Can't write on my stationery in Reader

I just bought Adobe Reader to convert my stationery from a PDF to Word so I can use it as email stationery. It will now let me edit the masthead on the letterhead, but not type in body copy. What do I do to get the write-on working?

Hi,
Are you using Adobe Reader for iOS? It sounds like you purchased the Export PDF subscription service to convert PDF to Word.
You can view converted documents (e.g. Word, Excel, PowerPoint) in Adobe Reader for iOS. But if you actually want to edit converted documents, you will need a different app, such as Microsoft Word for iOS (iPad/iPhone). It is a free app available in the App Store.
Hope this info helps.

Similar Messages

How can I write to port C and read from port A&B simultaneously using 6503 DIO-24

I attempting to read from Port A and B which are grouped together and at the same time I want to write to Port C. The problem I having now is that every time I want to read from Port A and B, Port C seems to be effected. I have only used the easy dio's vi this may be the root of my prblem

Hello,
You will need to use the advanced digital VIs to accomplish what you are trying to do.
The Easy DIO VI's are simply a combination of two DIO advanced VI, so you will use the same two advanced VI with a little different calling method. We want to call both PORT Config VI first to configure two ports for read and one port for write. Then we can simply read and write to the ports as desired, perhaps in a loop.
The best place to start would be to look at the LabVIEW examples for Digital Input and Output operations. In LabVIEW, go to Search Examples then under I/O interfaces select DAQ (or Data Acquisition)-> Digital Input and Output->Immediate Digital Input and Output. From her you will want to look at the examples under the 8255 chip which is the chip on
the DIO-24. I would recommend looking at Read from two digtial ports and the Write to one digital port VI's.
From here you will simply need to combine the two together. One note: you will want to make sure that both port config VI are called before either Port Read or Port Write VIs.

I am connecting an external USB HDD and I can see it on my Apple Macbook Air. BUT this drive is READ only. How can I write to it?

I am connecting an external USB HDD and I can see it on my Apple Macbook Air. BUT this drive is READ only. How can I write to it?

Drive Partition and Format
1.Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.

What Floppy Drive can I use with Mountain Lion to read and write floppy which can be read by SE30 with 7.1

I want to File Exchange between an iMac with 10.8.4 and a SE30 with 7.1.
All I want to do is install some software, such as Word 5.1 and a Chess game and some Fonts.
I have an external USB Floppy Drive but my iMac can only write to it IF I format as FAT, if I format it with the SE30 it can only be read and not written onto by the iMac.
Is there a way I can actually format/read/write Macintosh extended (HFS+) with Mountain Lion?
The external USB Floppy is a generic black one I bought from Amazon last week.
Someone else said I should get a Macally USB Floppy Drive and that reads/writes HFS+ etc with 10.8 no problem.
Is this because the Macally was released along with the Bondi Blue iMac?
I have tried using Apple Exchange on my SE30 - recorded some files onto the FAT formatted Floppy, and read it using Apple Exchange, but when 'translating' the Files transferred over as generic files which were no longer Macintosh programs or Files (eg Word 5.1 application or extensions/ Font suitcases etc) and could not be read.
Is there a way round this?
Or is there any way I can mount/read/write from the generic USB Floppy DRIVE with Sheepshaver (with 7.5.3)?
Any help or advice would be most appreciated.

>surely there must be some Terminal command or workaround for 10.8 to be able to Format in HFS?
Using dd to write an existing HFS disk image to a floppy may still work (but formatting/writing HFS from the operating system does not). You may want to compare this with the technique described in the article below. Obviously, this is only of interest if one wants to try creating floppies from certain (Disk Copy 4.2-style) downloaded 1.44 MB disk images.
http://lowendmac.com/brierley/08pb/classic-mac-boot-floppy.html
>If I got hold of an old iBook or Powerbook G4 (my sister has one) could I plug the USB Floppy drive I have into one of these and copy files over this way?
At least according to the following Wikipedia article, writing HFS has not been supported since Mac OS X 10.6. This should mean that your idea with the USB floppy drive connected to one of the older computers mentioned could work. BTW, I do not think that the USB floppy drive type/make/model is of importance in this very context.
Another idea could possibly be to use an even older intermediate computer for other file transfer methods (without a floppy).
A PowerBook 520/520c/540/540c could run Mac OS 8.1, if at all necessary. It has built-in Ethernet (an external AAUI to RJ-45 transceiver is used), which would allow TCP/IP connections over a network. A LocalTalk connection to the SE/30 can be established via a plain Macintosh MiniDIN-8M to MiniDIN-8M printer cable. With the correct SCSI cable/adapter, one could also use the PowerBook as an external hard disk for the SE/30 in SCSI disk mode.
A PowerBook 5300 can run Mac OS 8.1 or higher, if necessary. It does not have built-in Ethernet, but a PC Card (PCMCIA) network card can be used. Furthermore, with an inexpensive PC Card adapter for CompactFlash and a CompactFlash memory card, the computer would have a simple removable "hard disk". The CF card (in Mac or PC format) can be read by a modern computer (a USB reader may be needed), making it ideal for file transfers. LocalTalk can be used here too, and so can SCSI disk mode (HD target mode).
Jan

How can i write and read the same data

hi,
         i have attached my program to this mail. i have some problems in this program.
problems:
1. I want to select the threshold for the rms,varience and s.d.
But what i used is not doing that. i want to fix the upper threshold value and lower threshold value.
when ever the input crosses upper threshold value i want the output and it will remains uptill the value above the lower threshold value.
Once it come down the lower threshold value the output should be stopped.
2. I want to write this in to a file and i want to read this file. is this possible or not.
            please try to help me i am very new with lab view6i
       REGARDS
CHAMARTHY KOMAL DILEEP.
   [email protected]
Attachments:
dileep.vi ‏93 KB

The easiest way to perform a certain action (such as file I/O) based on a certain condition (such as whether a value has passed a certain threshold) is to use a comparison VI in combination with a case structure. Then you can specify that if your rms, standard deviation and variance are above a threshold then perform a certain action.
Also consider using shift registers to keep track of data from the last loop. If I understand you correctly, you want to start logging data when an upper threshold has been passed. Then you want to continue logging data until a lower threshold is passed. I have attached a non-functional but explanatory VI that will help explain how to implement logic to that effect. It also demonstrates that you can indeed write and read from the same file in a loop. The best way to do this is to open the file before the loop, do all the necessary writing and reading in the loop, and then close the file after the loop.
Hope this helps!
Jarrod S.
National Instruments
Attachments:
dileep_example.vi ‏61 KB

Can we write files and leave them as read-only

Hey Adobe AIR Community,
Another Adobe AIR question for you: Can we write files to the file system and leave them as read-only in Adobe AIR?
In the future, we would overwrite these files (or delete them and write a new one).
Thanks,
Mauricio

Please provide us with your Event Viewer administrative logs by following these steps:
Click Start Menu
Type eventvwr into Search programs and files (do not hit enter)
Right click eventvwr.exe and click Run as administrator
Expand Custom Views
Click Administrative Events
Right click Administrative Events
Save all Events in Custom View As...
Save them in a folder where you will remember which folder and save as Errors.evtx
Go to where you saved Errors.evtx
Right click Errors.evtx -> send to -> compressed (zipped) folder
Upload the .zip file to Onedrive or a file sharing service and put a link to it in your next post
If you have updated to win 8.1 and you get the error message "the system cannot find the file specified" it is a known problem. The
work around is to edit the registry. If you are not comfortable doing this DONT. If you are, backup the key before you do
Press Win+"R" and input regedit
Navigate to:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels. Delete "Microsoft-Windows-DxpTaskRingtone/Analytic"
Wanikiya and Dyami--Team Zigzag

Can Read but Can't Write to a Database

hi...i'm fairly new to java and have a problem w/ a database program i have written...i'm running windows xp along w/ access xp...the program i wrote works fine on my computer, however, the program is for my brother and on his computer it only reads from the database but can't write to it...unfortunately i packed the program in a jar file so when u run the program no console comes up to display the exceptions...he is running windows 98 (first edition) and doesn't have any version of access on his computer...i figure his odbc driver is out of date or something like that but i wouldn't know where to start to tackle this problem...any help w/ be very much appreciated...thank you...

Ask him to start the app via the command line/redirect (see [url http://java.sun.com/j2se/1.4.2/docs/api/java/lang/System.html#setErr(java.io.PrintStream)]System.setErr() to a file, or use a better logging method than you are now (more info in the catches, use [url http://java.sun.com/j2se/1.4.2/docs/api/java/util/logging/package-frame.html]java.util.logging ).

Can Read but Can't Write to Database

hi...i'm fairly new to java and have a problem w/ a database program i have written...i'm running windows xp along w/ access xp...the program i wrote works fine on my computer, however, the program is for my brother and on his computer it only reads from the database but can't write to it...unfortunately i packed the program in a jar file so when u run the program no console comes up to display the exceptions...he is running windows 98 (first edition) and doesn't have any version of access on his computer...i figure his odbc driver is out of date or something like that but i wouldn't know where to start to tackle this problem...any help w/ be very much appreciated...thank you...

First, don't cross-post:
http://forum.java.sun.com/thread.jsp?forum=54&thread=440288&tstart=0&trange=15
Submit your question to the forum that best suits its contents. Don't try to increase your chances of getting a response by posting the same question here, there, and everywhere. It's considered rude.
Second, if you've written a Java app that runs fine on XP, then your Java is okay. That's a good start.
I think Windows 98 is the problem. It's rather old technology now. I would say that Windows 9x really isn't an application platform worth thinking about. You might be correct - the ODBC driver might be out of date.
Is the version of Access you're running the same on both machines?

Contacts are there, but can't read anything in it, and can't write either.

Hello,
Contacts are there, but i can't read anything in it, and can't write either.
The place where i should read Name, Family Name, mail adress, phone, etc is EMPTY ! All white ! The card got hos name, but there is nothing in.
I started to use my mac book and adress book too.
I use mac os X since the beginnning, and i never had this problem with it.
Can someone help me please !
Thanks

Sounds like the Font Cache has a corrupt font in it.
Try this:
http://www.ehow.com/how_7197467_rebuild-font-cache.html
If that one doesn't work, it could be the WPF font cache
http://support.microsoft.com/kb/937135
You'll have to delete the .dat files in C:\Windows\ServiceProfiles\LocalService\AppData\Local and restart the computer.

I can read but I can't write to an external drive - changing permissions

I can read but I can't write to an external drive.
How do I change permissions? None of the helps here on the discussions have helped.
Why would a computer company let me read files but not write? Hahaha. This is insane.
I have to write computer files for work. It's a project due this morning.
Man, I'm going to have to go back to PC.
Just need the compter to write files.

If it's formatted as NTFS, reformat it as MS-DOS, exFAT, or Mac OS Extended (Journaled) as desired.
If it's formatted as FAT32 or exFAT, use the Disk Utility's Repair Disk command on it.
If it's formatted as Mac OS Extended, click Authenticate and provide your administrator password, or change the permissions on that specific folder in its Get Info window.
(72460)

I can't write to my Drobo

I have a new iMac (like this):
I am trying to connect the Drobo that I used to use with my Windows Computer. It has 4 drives @ 3TB each, and the whole drive is over half full, so I am not terribly interested in the cost that it would take to "back up" that whole disk pack. It took some shenanigans (reboots of both the drive and the computer; disconnections, and reconnections; fiddling around with MAC Disk Utility) to get it to show up in Finder at all. I still have issues with it unmounting and needing to remount it, but that's not my main issue.
THE REAL PROBLEM:
Though I can get the Drobo to show up in finder, and I can read from it, I can't write to it. Based on some earlier searching I tried this terminal command, which helped it to show up in finder, but didn't seem to affect it's being read-only:
new-host-3:~ davidholcomb$ getfileinfo /Volumes/Drobo
directory: "/Volumes/Drobo"
attributes: avbstclinmedz
created: 12/10/2012 19:06:46
modified: 09/11/2014 03:37:07
Looking at another thread (partition map check failed because no slices were found), which I wandered into because I was getting this error in Disk Utility upon running Verify Disk because I got a failure when I tried to "mount" the drive in Disk Utility:
This thread suggested I try a couple additional Terminal Commands, which I will post the results of here:
#1: diskutil list
new-host-3:~ davidholcomb$ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *121.3 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:          Apple_CoreStorage                         121.0 GB   disk0s2
   3:                 Apple_Boot Boot OS X               134.2 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.0 TB     disk1
   1:                        EFI EFI                     209.7 MB   disk1s1
   2:          Apple_CoreStorage                         999.3 GB   disk1s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk1s3
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS Macintosh HD           *1.1 TB     disk2
/dev/disk4
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *17.6 TB    disk4
   1:       Microsoft Basic Data Drobo                   17.6 TB    disk4s1
#2 diskutil cs list
new-host-3:~ davidholcomb$ diskutil cs list
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group 7DACBFD5-E22C-404B-98B1-99D97AD08B2F
    =========================================================
    Name:         Macintosh HD
    Status:       Online
    Size:         1120333979648 B (1.1 TB)
    Free Space:   114688 B (114.7 KB)
    |
    +-< Physical Volume F26F7717-B081-4312-8252-65C9E3040AD4
    |   ----------------------------------------------------
    |   Index:    0
    |   Disk:     disk0s2
    |   Status:   Online
    |   Size:     120988852224 B (121.0 GB)
    |
    +-< Physical Volume 414053B5-EFD8-4FC0-87CE-F3913D6E876B
    |   ----------------------------------------------------
    |   Index:    1
    |   Disk:     disk1s2
    |   Status:   Online
    |   Size:     999345127424 B (999.3 GB)
    |
    +-> Logical Volume Family BE5280EF-B093-4137-88A2-5AF3F1ACEFCC
        Encryption Status:       Unlocked
        Encryption Type:         None
        Conversion Status:       NoConversion
        Conversion Direction:    -none-
        Has Encrypted Extents:   No
        Fully Secure:            No
        Passphrase Required:     No
        |
        +-> Logical Volume D35043A0-F886-4223-81DD-4880F04ECEA3
            Disk:                  disk2
            Status:                Online
            Size (Total):          1114146996224 B (1.1 TB)
            Conversion Progress:   -none-
            Revertible:            No
            LV Name:               Macintosh HD
            Volume Name:           Macintosh HD
            Content Hint:          Apple_HFS
and #3: Mount:
new-host-3:~ davidholcomb$ mount
/dev/disk2 on / (hfs, local, journaled)
devfs on /dev (devfs, local, nobrowse)
map -hosts on /net (autofs, nosuid, automounted, nobrowse)
map auto_home on /home (autofs, automounted, nobrowse)
/dev/disk4s1 on /Volumes/Drobo (ntfs, local, nodev, nosuid, read-only, noowners)
Another user who had run these commands and posted the results, seemed to have been missing an EFI partition on their external drive and was asked to run this command and post results. But the thread with that user dies there. Here are my results of this command:
new-host-3:~ davidholcomb$ diskutil info disk4
   Device Identifier:        disk4
   Device Node:              /dev/disk4
   Part of Whole:            disk4
   Device / Media Name:      TRUSTED Mass Storage Media
   Volume Name:              Not applicable (no file system)
   Mounted:                  Not applicable (no file system)
   File System:              None
   Content (IOContent):      GUID_partition_scheme
   OS Can Be Installed:      No
   Media Type:               Generic
   Protocol:                 USB
   SMART Status:             Not Supported
   Total Size:               17.6 TB (17592186044416 Bytes) (exactly 34359738368 512-Byte-Units)
   Volume Free Space:        Not applicable (no file system)
   Device Block Size:        512 Bytes
   Read-Only Media:          No
   Read-Only Volume:         Not applicable (no file system)
   Ejectable:                Yes
   Whole:                    Yes
   Internal:                 No
   OS 9 Drivers:             No
   Low Level Format:         Not supported
Can anyone help me with a next step to make this drive read/writeable?

Turns out that the Drobo needs to be plugged straight into computer. I had it via hub. Though it has worked for the past couple weeks in this configuration, the new update pushed it over the edge, I guess. Plugged in directly and working fine.

I'm unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK

I’m unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK – and only fails when I write from iTunes. The drivers are up to date
Microsoft Windows 7 x64 Business Edition Service Pack 1 (Build 7601)
Dell Inc. Latitude E6420
iTunes 12.0.1.26
QuickTime 7.7.6
FairPlay 2.7.39
Apple Application Support 3.1
iPod Updater Library 12.0
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 8.0.5.6
Apple Mobile Device Driver 1.65.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 3.06.0.2770
Gracenote MusicID 3.06.0.2770
Gracenote Submit 3.06.0.2770
Gracenote DSP 3.06.0.2770
iTunes Serial Number 756D13C00C3583C8
Current user is not an administrator.
The current local date and time is 2015-01-13 14:47:35.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 12.0.1.26 (x64) is currently running.
iTunesHelper 12.0.1.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: SbCeCd (3.2.6.3),
UpperFilters: GEARAspiWDM (2.2.3.0),
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Drive is empty.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Audio CD in drive.
Failed Reading table of contents, error 4000.
Check the website of your computer or drive manufacturer to verify that you have the latest firmware for your CD / DVD drive.
Audio CD reading failed. Error Code: 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87.
iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
Get drive speed failed. Error Code: 4000.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.

Hi iTunes-1,
Welcome to the Support Communities! The error message you posted indicates a possible firmware update is needed for iTunes for Windows to work with your CD drive.
iTunes for Windows: Updating the firmware on your CD or DVD drive - Apple Support
http://support.apple.com/en-us/HT201852
Having outdated firmware can cause issues using CDs and DVDs with iTunes for Windows. Firmware is a type of software stored in a chip in hardware that can sometimes be updated.Identifying drives and firmware versions
To run CD Diagnostics, follow the steps in this document.
After following the steps to run CD Diagnostics linked above, look at section three to find out more about your optical drive(s).
Here is an example of what section three might look like:
In this example there are two drives. Drive E is a Samsung DVD-ROM drive with a model designation of SD-616 that has firmware version F000. Drive F is an NEC drive with a model designation of NR-7900A that has firmware version 1.08.Updating the firmware
If the optical drive you are using came with your computer, check with the support site for your computer for a firmware update. Typically you will need to go to the support website for the computer maker and click on a "downloads" or "updates" link, and then enter your computer model designation and operating system version to see what updates are available. Then look through the available updates for a firmware update for your optical drive. Download the updater and run it. If you need assistance applying the update, contact the maker of your computer.
If the optical drive you are using came as a separate part (was not included with a computer), check the support site for the drive maker for a firmware update. Sometimes the manufacturer is not clear in the CD Diagnostics results. In that case, you may just have to search the Internet for the drive model designation. You can usually find out who made the drive by looking through the results of such a search. Once you have identified who made your drive, go to the support website for that company. Look for a "downloads" or "updates" link, and then enter your optical drive model designation. Download the updater and run it. If you need assistance applying the update, contact the maker of the optical drive.Verifying that the firmware was updated
Run CD Diagnostics again.
Examine the CD Diagnostics results. The firmware version for the drive should be the new version.
Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Risks are inherent in the use of the Internet. Contact the vendor for additional information.
Last Modified: Nov 8, 2014
Also, you mentioned that you have been successful burning a CD with the Windows OS. Make sure that you have closed all software programs that can access the CD burner so that there isn't a conflict for the drive. Sometimes chaning the burn speed from "maximum" to 8x can also help in this situation.
I hope this information helps ...
- Judy

How and where can I write a subject matter in a reply I am doing,

How and where can I write a subject matter in a reply I am doing, I dont want the original subject matter and all I can see is the person to whom I am sending it and cc on the right?

What are you actually asking about use of webmail ?
*[[Problems with email and how to find help]]

How can I change the permissions on a read only external HD

I have a WD external HD and I am transferring a file more than 4GB in size. The current partition scheme supported by Ma, being FAT 32, supports only up to 4GB in file transfer size. If I format the external HD on my PC in a NTFS file format it is supposed to handle file transfers bigger than 4GB. Which is true, but it only goes one way, so for example if I am transferring a file from PC to HD to Mac it works just fine, with a few minor hickups, but the other way it does not work at all. So if I want to add anything onto the external HD being hooked up to my Mac, and still being in NTFS format I get a message saying that I do not have sufficient privileges, and under drive info it says that it is read only. Any help on the topic, please.......All the best
Rafcio

Hi Rafcio
I get a message saying that I do not have sufficient privileges, and under drive info it says that it is read only. Any help on the topic, please
Basically, this is not a privileges problem, it is a limitation of the formats. OS X can read NTFS, but not write it. See How to transfer data from a PC to a Macintosh:
Mac OS X 10.3 and 10.4 work with local NTFS-formatted volumes. The volume will be read-only.
… and Boot Camp 2.0, Mac OS X 10.5: Frequently asked questions:
Mac OS X can read and write FAT volumes, but only read NTFS volumes.

How can I Write a sine wave in an Access-file?

I measure a sine wave in LabView 6i. How can I write the datas automatically to an Acces-file, at the same time?
In my program, I managed it with Execute SQL.vi, I change a number in a SQL statement(String) -> after this I push start and then it writes the statement in the Access-file.
The problem is, it writes only one data per measurement in the file. How can I write all datas in the Access-file and measure the wave at the same time?
Thanks for help!
Attachments:
getwave.vi ‏49 KB

On the waveform palette, you will find a "to components" vi that you can break out the array of the waveform. You can then, using a for loop write all of the values from the waveform.
Better yet, there are examples in the database toolkit manual on pages 3-13 to 3-15 that deal with reading arrays (and even has a waveform example).
Good luck!

Can't write on my stationery in Reader

Similar Messages

Maybe you are looking for