Can't write/save files to Lion server after upgrading to Yosemite

So I updated my "home" computer to Yosemite, I always test new OS on this computer for issues first as to not affect the all important "work" computer. Only issue I can find is I can't save/write files to my mac server running 10.7.5 (lion). It seems I have dissappeared from permissions. I can't add me back in because my mac on 10.10 states I don't have permission to do that (mind you I am admin on everything). I go to my work computer that is still on Mavericks and everything is fine, I can write to the server with no issues.
Any ideas on where I should look to fix a setting that seems to have gone awry? It was late last night and I was getting tired of figuring out what to fix.
I do see "me" for that "home" computer on the server....just not showing on the "home" computer itself.
Than

By looking at your post i have several questions to ask :
Where are the temporary files stored ?
Which data sharing scheme are you using for them ? AFP with POSIX or ACL behaviors, something Indesign uses ?
Which versions of indesign are you using ? Some differences exists in between PPC installs and Universal install and may play havoc with that.
There might as well be the question of ownership and rights that may differ as mentionned above in between your G5 workgroup and the MacPro.

Similar Messages

I can't open a .psd file in Illustrator CS4 after upgrading to Yosemite

I can't open a .psd file in Illustrator CS4 after upgrading to Yosemite.

Can you open any file, i.e. jpeg, etc.? Have you installed the Apple legacy Java: Java for OS X 2014-001? I'm guessing you have because you wouldn't be able to open PS at all without it. But have to ask.

Can't filter by file type RAW + JPEG after upgrading to 3.3

I'm running 10.7.4 OS.
After upgrading to 3.3 I'm unable to filter my photos using the "Raw + Jpeg" argument. There are Raw files and Jpeg files and they filter okay. The combo doesn't work any longer. How do I get this to work?

See "Unexpected installation error -203"
http://kb.mozillazine.org/Unable_to_install_themes_or_extensions_-_Firefox

Why can't I see my applications in finder after upgrading to Yosemite?

I upgraded to Yosemite and now my applications do not appear in finder. How do I fix this?

Well, first of all, Safari is located on the dock. That's how I got Safari open. Although I am a new user of Yosemite I've been using mac computers for over 7 years. So, I'm not a complete moron. Yosemite seems to be a bit inconsistent on my computers. In Finder on my mac desktop computer there is, on the left side, the heading "Devices", in which my mac and my macbook pro are listed. Here the macbook is called "Remote Disc". On the macbook the heading "Devices" is not present. Instead there is the heading "Shared". Here I can see the mac listed but, not the macbook. So, the hard drive for the macbook is not listed in Finder, on the macbook. On the macbook I did attempt to locate the applications folder under my user name, which is listed under Favorites. There I find a folder named Applications but, it appears to be empty. When I click on it nothing appears. I have discovered a work-around though. I can locate my Applications folder by clicking on the hard drive icon on the right side of the desk top of the macbook. So, since I have been able to locate the Applications folder there I have decided not to worry about trying to locate it in Finder. If I were still worried about it, would that be enough information for you? Is that precise enough? I was trying to keep it brief. I didn't want to write a novel.

Can't stay connected to Linksys RE1000 extender after upgrading to Yosemite

Ever since upgrading to Yosemite I'm having trouble staying connected to the WIFI network that I have extended through a Cisco (Linksys) RE1000 Wireless-N extender. It was working fine prior to the upgrade to the final version (even through all Yosemite preview versions).
I've reset and resetup the RE1000 and I continue to have the problem. The WIFI seems to work fine when I connect to other WIFI networks, it's just this one for some reason.
Anyone using one of these?

I've reset and it says it doesn't work with Yosemite... currently engaged in a twitter conversation with @LinksysCares.
So you buy an extender (two years ago) and already it's become useless.
Thanks Apple & Linksys.

Looking for an off line version of the help file for lion server that I can print

I would like to find an offline version of the help file for lion server
Im a newbie trying to set up a home server for our macs and Iphones

Go to this URL using Safari on your mac:
https://help.apple.com/advancedserveradmin/mac/10.7/print.html?lang=en#printBook
Then press cmd+p and from the print menue choose PDF and then Save as PDF and there you have it.

Mail Server Error: Fatal error: can't write proc file

I am a novice with OS X Server. It has been running fine for months but now I am having trouble. I get the following error log in SA:
Dec 3 19:19:24 MasterControl imap[1761]: Fatal error: can't write proc file
Dec 3 19:19:25 MasterControl imap[1763]: DBERROR: dbenv->open '/var/imap/db' failed: Permission denied
Dec 3 19:19:25 MasterControl imap[1763]: DBERROR: init() on berkeley
Dec 3 19:19:25 MasterControl imap[1763]: IOERROR: creating /var/imap/proc/1763: No space left on device
The drive has lots of space left on it.
Also in the maintenance accounts section, it states for every user there is an unknown mailbox path in the mailbox store.
Any help would be appreciated.

I rechecking the situation, the drive is showing that it is totally full. Its a 60 gig drive that yesterday had 10 gigs on it...now it is full. Not sure where the other 50 came from or where they are. I've just deleted some programs and the drive is still showing full.

Path does not exit - While trying to save file on SharPoint Server 2013 from client machine

Hi,
I have installed Microsoft SharePoint Server 2013 Enterprise Edition on my testing Lab environment (On VM Workstation 10) on Windows Server 2012 with SQL server 2012, I can access all files stored at SharePoint Server from any physical machine, I can share
a single file among different people to work simultaneously, but here i stuck on saving any file from client machine to directly on SharePoint Server, Attached is the snap shot, whenever I try to save any file directly It says Path Does Not Exist, If I drag
and drop any file directly to SharePoint I do not see any error message.
I read from different posts that I need to Enable Desktop Experience Feature on Server 2012, which I installed but no positive result gained :(
I will appreciate for any possible help?
Ali

Hi Ali,
Please try disabling the protected view per the link below and test the issue again:
http://social.technet.microsoft.com/Forums/en-US/b8381a19-3394-406f-8adb-1976f45460ef/path-does-not-exit-while-trying-to-save-file-on-sharpoint-server-2013-from-client-machine?forum=sharepointgeneral
You could simply type the url as http://sp/sites/sitename in the Filename place.
Regards,
Rebecca Tu
TechNet Community Support

Can I safely save files to the external harddrive I am using as/for a Time Machine?

Can I safely save files to the external harddrive I am using as/for a Time Machine?

Because ALL Hard Drives fail. They have been since they were invented. It is just a fact of Spinning hard drives.
No nothing special about how TM writes to the drive.
Any hard drive can fail at any time. The day you take it out of the box and plug it in to 10+ years later or anytime in between. Kind of like Life. At some point it ends for everyone. Some sooner some much later.
I've had some work for years, like 7++ running 24/7. Others have died in months to a few years. I've had externals died faster then internal drive and the funny part is an external drive is nothing but the same type drive used Inside a computer, an Internal drive, put into an External case. But most of the time when an external dies it is not the drive itself but the Enclosures Electronic that fail. Removing the physical drive from the enclosure and using a SATA, or IDE, to USB Adapter the drives are usually still good. I've even taken dead externals and removed the drive and put that drive inside a computer case and they work for X number of years. But that doesn't mean that All Drives are like that.

Can't write cache file for while creating domain in soa 11.1.1.5 on HP-UX

Hi,
Installing SOA 11.1.1.5 on HP-UX and during domain creation/configuration I am getting the below errors
**sys-package-mgr: can't write cache file for**
and have lots of cache file errors for different packages
Any idea what might be wrong and whats the cause of these errors and is it safe to ignore these errors if not what is the work arround. As I already looked at the below post but I don't find */var/tmp/wlstTemp* on my machine as suggested in the post below.
SOA 11.1.1.5 install got can't write cache file
So wondering if there's anything else I can do i.e. while creating or configuring a Domain pass some parameter to config.sh etc.
Thanks

Hi,
I don't see python.cachedir in config.sh. Here is config.sh
#!/bin/sh
mypwd="`pwd`"
# Determine the location of this script...
# Note: this will not work if the script is sourced (. ./config.sh)
SCRIPTNAME=$0
case ${SCRIPTNAME} in
/*) SCRIPTPATH=`dirname "${SCRIPTNAME}"` ;;
*) SCRIPTPATH=`dirname "${mypwd}/${SCRIPTNAME}"` ;;
esac
# Set the ORACLE_HOME relative to this script...
ORACLE_HOME=`cd "${SCRIPTPATH}/../.." ; pwd`
export ORACLE_HOME
# Set the MW_HOME relative to the ORACLE_HOME...
MW_HOME=`cd "${ORACLE_HOME}/.." ; pwd`
export MW_HOME
# Set the home directories...
. "${SCRIPTPATH}/setHomeDirs.sh"
# Set the config jvm args...
CONFIG_JVM_ARGS="${CONFIG_JVM_ARGS} -DCOMMON_COMPONENTS_HOME='${COMMON_COMPONENTS_HOME}'"
export CONFIG_JVM_ARGS
# Delegate to the main script...
"${WL_HOME}/common/bin/config.sh" "$@"Thanks

How can get my Iphotos as screen saver ...all disappeared after upgrading ...I have done as suggested in deleting the files from the Finder ..now just left with the "squirly default " screensaver option

How can I get my Iphotos to show as my screen saver please ? all disappeared after upgrading ...I have done as suggested and deleted all relevant files , but now am only left with the "Squirly " screen saver option in the drop down menu and no option for Iphoto library.

Slow, intermittent. Sometimes bootable sometime not. Odd behavior.
Sounds to me like a classic case of your HD failing.
Your SMART status may still show verified, with no errors on the Apple Hardware Test, Disk Utility shows no problems on Disk Repair- this is of no help.
I trust you have a good back-up and a bootable clone.
http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/

SOA 11.1.1.5 install got can't write cache file

Hi,
I installed 2 node cluster of SOA 11.1.1.5 on linux and during domain configuration I got errors i.e.
**sys-package-mgr: can't write cache file for**
Installation was done and all the servers start/stop fine am able to deploy the processes, am able to access all the urls fine everything coming up fine BAM, SOA, OSB etc . Just wondering if the error above have any effect on the installation or any piece that might not work. As I have already did the installation and ignored those errors above so just wanted to see if anything I need to look for.
Thanks

Hi,
It's a cluster install and took sometime to do the full install so it will be a pain to re-install everything over. Currently have tested the processes and seems to be working fine.
Also I don't find
/var/tmp/wlstTemp
I do see wlstTemp appended with linux users who did Oracle SOA install.
Also in-future when creating a new environment besides the above chmod 777 on /var/tmp/wlstTemp is there any parameter we can supply when running config.sh. I read some where that in-order to get by these errors at the time of domain creation we can also pass some parameter.
Thanks

Can Framemaker 12 save files down in Framemaker 11 and 10 ? Is it backward compatible?

Can Framemaker 12 save files down in Framemaker 11 and 10 ? Is it backward compatible?
Thanks,

> Times New Roman ... you’re probably using the Unicode version of it ...
Port a legacy font from the FM7 machine to the FM12 machine, such as Type1 Times, and convert the document to that on the FM12 machine.
This may not completely solve the problem, as FM8 and later, when opening a pre-FM8 document, appears to convert some things to Unicode code points (even to the point of synthesizing a Unicode encoding of a legacy font, see Re: Adding the Trademark symbol to a document). Saving back to MIF7 probably does not convert the code points back, and FM7 may well complain, or crash, or something.
If the problem is limited to certain special characters, like ™, there may be work-arounds, like invoking them only as Variables.
This Unicode border between FM7.2 and FM8 may prove to be one-way for many documents, rather like the spikes at the exit of rental car lots. Do not back up. Extreme document damage may result.

I have Macbook Air with Yosemite os but i can't transfer my file on ftp server

i have Macbook Air with Yosemite os but i can't transfer my file on ftp server
i need help

I'm confused how you think someone on Apple's discussion board can help you with what's clearly a Windows Server problem.
Surely this would be something better asked in a Microsoft support forum?

TS1402 I can not copy any files from the server & from the Finder. System MAC OS 10.7.5

I can not copy any files from the server & from the Finder. System MAC OS 10.7.5
<Email Edited by Host>

Hi, what is the no boot directory found about???
Can you give details step by step of what you're trying?

Can't write/save files to Lion server after upgrading to Yosemite

Similar Messages

Maybe you are looking for