Can't write to Buffalo Linkstation

Since downloading Mavericks I can no longer write to my linkstation. I have found a workaround to mount the folders:
From any Finder window type in Command+K to brink up the "Connect to Server window". In the Server Address field, type:
cifs://IP_Address_of_Buffalo_LinkStationNAS
But I still can't write to it! It's very frustrating as this is where all my work files are stored!
Anyone know how to fix this?

I can. Oddly, it fixed itself. However, the owner is root, but I can still create files and such using a non-root user. I am sharing it with Windows and such, so will that affect my access in the future?

Similar Messages

Buffalo LinkStation Live and NasNavigator 2 problems with Mac

I am using a Buffalo LinkStation Live (LS-CH1.0TL) with my MacBook. With the Firewell turned off on my Mac it works really well. Unfortunately, with the Firewall on, a perpetual dialogue box appears asking to give permission to allow incoming connections from NasNavigator 2. Whether you click Allow or Deny, the message appears again after about 10 seconds. This process continues indefinitely. It works fine with Windows 7 (either run via Mac or on my previous PC). I have updated all software/firmware and reformatted and restored factory settings on the LinkStation.
Buffalo are stating that this is an Apple issue so can anyone help or is this going to be technical-support-tennis where each are blaming the other?! Your help would be greatly appreciated!
Thanks in advance for your help!

Somewhere at either Macworld or here I learned that DVDSP 2, DVDSP 3 and now DVDSP 4 "internally" are major re-writes.
Support for HD among a few other items along with QT 7 which comes with Tiger means sincerely that one set of applications/OS is not going to be stable.
Personally I think of all the issues possible its DVDSP vs QT.
Unless you move to DVDSP v4 the alternative is to wipe the disk and go back to Jaguar (10.2) or perhaps Panther but avoid upgrading QT beyond 6. I advocate wiping the disk because I'n not sure an archive and install to down shift to an earlier version of the OS is possible. If it is I'd still worry about mis-matched files in all sorts of locations.

How do I set up a share on my buffalo Linkstation Live 2 TB

Can anyone please help me?
How do I set up a share with my Buffalo Linkstation live so that I can use it for my iTunes library?

download the setup guide from here and follow the instructions.

Will the Buffalo LinkStation Live work with my Mac Book?

I am wanting to get a hard drive that will wirelessly back up my two MacBooks using Time Machine Software. Also, I would like to be able to hook up my printer to this device so that we can share a printer between the two Macbooks wirelessly.
I came across the "Buffalo LinkStation Live™ - LS-CHL". It seems to do exactly what I want, but I can not tell if it is compatible with Time Machine software or if I have to use their bundled software.
Basically, I want to share a backup HD and printer between my two MacBooks....wirelessly. I do not need a router because I already have one. I understand a Time Capsule would probably work, but it is more than I want to spend.
Here is a link to the LinkStation Live™ - LS-CHL.
http://www.buffalotech.com/products/network-storage/linkstation/linkstation-live -ls-chl/
THANK YOU!

I'm not sure about the 2007 mini, but a quick check is to open your system preferences and look for Bluetooth preferences. If there aren't any, then no magic mouse for you...

Buffalo Linkstation works with all PC's but not iMac - With Airport Extreme

Hi. I hope someone can help. Been at this for days, even AppleCare can't help....
We have a Buffalo linkstation hooked to a new Airport Extreme.
All PCs can see it and view documents, iTunes, etc. My iMac cannot. Actually, I think it sees it but it's a mere file on my desktop. When I click on it, it pulls up a Finder type window, but this Buffalo icon (like network icon) can't be mounted in my normal finder main section. I can't figure out how to do that.
When I open Finder, I don't see the buffalo at all but have to go thru many libraries to find it. When I click on it ("connect") to it, It says "Select the SMB/CIFS shared volume you want to connect to: I click on the name, but it says "the alias blablabla could not be opened because the original item cannot be found. It gives the option to fix alias so I hit that and it puts me in my "documents" area and won't let me go anywhere else.
OMG... Can someone tell me how to get this thing working? I can see the files but they are so buried. I'd like to take this Buffalo which seems to be on my desktop and mount it? to the right area of my Finder.
All I want to do is see the darned iTunes on the buffalo wirelessly via airport extreme. LOL All other computers (PC's) did this instantly. Help?

Yes, I can see everything I need to see (external HD)....
I even dragged the darned thing into the finder...
Now my upper left box of the finder says:
Network
Share (that's my external buffalo HD)
Windox XP
iMac
The problem with the above is that "Share" is not mounted. It has the eject button next to it. I think (maybe) I could get this functioning if I could mount this darned thing but I can't for the life of me get it to do that. Any ideas?
EDIT: I'm not sure how to use directory access utility. Do I need to?
Message was edited by: meagain1

Buffalo Linkstation - Sync no Pictures

first. Sorry about my english ...
all my music, videos and pictures are at the "buffalo linkstation".
and itunes see and play musik and videos and sync all with ATV ... but not the pictures, and yes, i can select it in itunes und see all the folders ...
wy ?

I am having the same problem synching pictures only (not music, video or podcasts) located on a Buffalo Linkstation Pro, and the problem is with my iPhone and Apple TV. I recently moved my files to the Linkstation L drive from a smaller Western Digital D drive (Library still on C drive). Synch worked fine for severl days on both the iPhone and Apple TV, but then it started to hang synching pictures. When I move the pictures back to the WD D drive or to the C drive, the synch works perfectly. However, iTunes will not synch pictures located on the Buffalo Linkstation L drive (which does show up as a shared drive, too).
Appreciate any advice on this as I have very large files and need he storage capacity of the Buffalo Linkstation.

Buffalo Linkstation is not recognized when plugged directly into mac

I recently received a Buffalo Linkstation and tried setting it up, when i got it all up and running, the lights come on, but it won't connect to my mac, it's connected via ethernet cable
I do not have it plugged into a router and don't want to go get one, I have two wireless routers, but when i first used one for both the internet and the linkstation, it was too slow, and when i tried using one for the internet and one for the linkstation, they interfere with each other and defeat the purpose.
I just want it to go from the hard drive to the mac, then when i get it all set up, i'll add a printer
I know this defeats the purpose of the networking capability and that i should just go get an external hard drive, but I did have one and it stopped working, so i sent it in and got this.
Any help whatsoever would be appreciated

I've never seen one of these puppies but your question
was intriguing so I looked at Bufflalo Technology's web
site. They claim to have a built-in ftp server, and that
sounds like how you're gonna connect. The first thing to
do is figure out the linkstation's ip address. Hopefully the
default will be listed in the manual, or maybe you set it
in the setup process. Otherwise, you've got to search
your network for port 21. If it gets its ip address via DHCP,
you need a DHCP server in the mix. I bet your wireless
router has one, and you could use it to get you going.
Once you have the ip address, you can mount the device
in the Finder using Command-K and entering
ftp://xxx.xxx.xxx.xxx
where xxx.xxx.xxx.xxx is the ip address.
Good luck!
Powerbook G4, iMac (Intel), and tons of hardware sitting in the closet Mac OS X (10.4.8)

Connecting My E7 to my Buffalo Linkstation over a ...

Can anyone please help I've tried using the remote drive option to access my Buffalo Linkstation using the web address http://192.168.1.13:9050/ shown on my pc - I've entered the correct login and password, but all i get is unable to coonect 'Link Station' Not found check settings?

Open needed port(s) for webdav in your router,
Perhaps your firewall inside the phone is blocking or you haven´t the right settings in your router.
Dynamic ipadress?
https?
Nokia 808 again (delight Belle), Nokia E7 and X7 ( again, all on Delight Belle...after some time on Nokia Lumia 925 (retired), 1020 (not that great)and Lumia 820 (Replaced my router at home, great for internet sharing).., N9 The best device ever (use it as much as Lumia 1020), Nokia 700 (Sport Phone/My Love :-) ) Nokia 701, Nokia E6 (Should have a follow-up from Nokia among with larger screen, NFC, Autofocus), Lumia 800 (Retired After 6 weeks), -Sports Tracker-Nokia Internet Radio-Handy Safe-Skype-Bambuser-Screenshot app pro-fMobi-ComingNext-Manual TaskSwitcher-jagiTimer-Easy StopWatch-Boldbeast-Equalizer-Financial Calculator-WiMP Music-YTasks-Davi-Thumbnail Folders-BizCalendar-Tiny7-Situations-nn reeder-Sport Timer-CameraLover-CameraPro-GrabRadio-LiveScore-Poddi-Gravity-SkyFilesPro

Anyone help setup TC with Buffalo Linkstation NAS

I have a TIme Capsule working great with my iMac. I also have a Buffalo Linkstation Live 1Tb NAS.
There is a smartphone app that allows you to share a folder from your NAS over WiFi and 3G. I want to do this so I can share my music over my 3G when out and about, and play it (I am in UK and have unlimited 3G internet).
However in the easywebaccess setting it says I havent got UPnP. I'm unsure how to enale/set this in my TC. I goto advanced setting on my NAS and says I need to setup oorts etc, I dont know how to do this on a TC.
When trying advanced setup I get this error "UPnP Gateway not found and/or doesn't support port forwarding, use manual setup."
Anyone help please?
cheers

Let me suggest you swap your system or your thinking..
If you use a modem router to which the TC is connected tell me more.. The TC can be bridged and the other device become the router.. this makes things easier as you can then track ports that upnp opens.. and see what you need to do.
I am unsure where the app is loaded.. is it in the buffalo or the phone??
Mostly iphone is rigged to itunes, welded or melded would be better as it is almost impossible to escape itunes.. so when you coyly refer to smartphone.. I presume you are not actually talking about iphone but the that horrible company that had the gall to encroach on Apple's space.
To get music to work, it must use a standard method eg http, or ftp etc.. all you need to do is to tell me what method it uses if you don't have the actual ports it uses.
Apple buiild everything to operate in their own paid for realm of itunes.. icloud etc. When you try to bypass that.. you need to get the apple router out of the way.
(It might also be much easier to use an SD-Card or some other memory type if you can plug those in).

Time Machine - Not Seeing My Buffalo LinkStation Hard Drive

Currently have a Buffalo LinkStation 2TB hard drive on my home network. The Buffalo is connected to my router (Netgear WGR614v10). It is not physically connected to my iMac, but I do have a LinkStation icon on my desktop in order to add files to.
When trying to start Time Machine, I click "Choose Backup Disk" but the only drive listed is my Maxtor 750GB that I had when I purchased my iMac a couple of years ago. The Maxtor was purchased when I first bought the iMac because I wanted to use Time Machine (my iMac has a 750GB internal hard drive).
Because the Maxtor 750GB is the only backup drive listed, I click "Set Up Time Capsule" but the "AirPort Utility" says it was unable to find any AirPort wireless devices. The only thing I can do at this point is "Rescan" which only proves the same result. There is a "Manual Setup" button at the bottom but it is greyed out and I can't select it.
How do I configure the Buffalo LinkStation so Time Machine will view it as an available backup drive?
Also, how would I do this if I added an additional hard drive (or two or three more)?
I have a feeling this is probably obvious and I'm just missing it.
Any help would be appreciated! Thanks in advance!
Gtroop

Gtrcoop007 wrote:
Currently have a Buffalo LinkStation 2TB hard drive on my home network. The Buffalo is connected to my router (Netgear WGR614v10). It is not physically connected to my iMac, but I do have a LinkStation icon on my desktop in order to add files to.
Time Machine does not work well, if at all, with some NAS devices. See #2 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).

Problems printing via a Buffalo Linkstation

Hi - I'm having problems printing to the print server that comes as part of a Buffalo Linkstation. The printer in question is an Epson DX7450.
I can print successfully to the printer via USB
I can install the printer successfully as a windows server attached printer (attached to the Buffalo)
But when I print, I get the following errors. I'm assuming the driver is expecting two way comms with the printer, but the Buffalo doesn't support this. Anyone any clues?
Thanks,
Tim
I [18/Jun/2009:20:21:51 +0100] [Job 12] Started filter /Library/Printers/EPSON/InkjetPrinter/Filter/pdftopdf.app/Contents/MacOS/pdftop df (PID 279)
I [18/Jun/2009:20:21:51 +0100] [Job 12] Started filter /usr/libexec/cups/filter/cgpdftoraster (PID 280)
I [18/Jun/2009:20:21:51 +0100] [Job 12] Started filter /Library/Printers/EPSON/InkjetPrinter/Filter/rastertoescp.app/Contents/MacOS/ra stertoescp (PID 281)
I [18/Jun/2009:20:21:51 +0100] [Job 12] Started backend /usr/libexec/cups/backend/smb (PID 282)
W [18/Jun/2009:20:21:51 +0100] [Job 12] recovered:
E [18/Jun/2009:20:21:51 +0100] PID 281 (/Library/Printers/EPSON/InkjetPrinter/Filter/rastertoescp.app/Contents/MacOS/r astertoescp) stopped with status 206!
I [18/Jun/2009:20:21:51 +0100] Hint: Try setting the LogLevel to "debug" to find out more.
E [18/Jun/2009:20:21:51 +0100] [Job 12] Job stopped due to filter errors.

Should have googled properly - see this is an issue using a usb driver for a network printer. So I'll go and get a cups driver and see what happens.

'Phantom' iTunes tracks on Buffalo Linkstation Live shared drive

I have finally copied all my music over to a Buffalo Linkstation - I could not consolidate so dragged into iTunes from my PC drive and changed directory location. My PC can see the entire library direct and my iMac and PC can see the library on the Buffalo drive. But when searching direct to Linkstation via PC or iMac I am seeing multiple copies of tracks. Some of these multiples come up with '!' others show up 2 or 3 times and can be played. There are no duplicate copies on the LinkStation - the trash is empty. Any ideas please?

download the setup guide from here and follow the instructions.

Airport Express with a Buffalo LinkStation Pro

Hi
Im thinking of purchasing a Buffalo LinkStation Pro networked drive to hook up to my home network.
http://www.buffalotech.com/products/network-storage/home-and-small-office/linkst ation-pro-ls-xhl/
One of the specifications of this drive is that it has a built in iTunes server. Can i use this server to provide content to Airport Express, or would i still need to go via a PC?

One of the specifications of this drive is that it has a built in iTunes server. Can i use this server to provide content to Airport Express, or would i still need to go via a PC?
Based on the following feature comment: "iTunes® Support: Play music from the LinkStation through your iTunes application," I would be led to believe that you will still require an iTunes host (PC or Mac) to play the audio files stored on the Buffalo LinkStation.

Problem connecting to Buffalo Linkstation Pro

Hi all, im still looking for a solution to this problem...
I have 2 macs that use airport express for network / internet etc. The Airport express is connected to my router to get to the internet connection. I also have a PC that is wired to the router. All works great, until I got a Buffalo Linkstation Pro Network HardDrive. I have set up the buffalo by plugging it in to the router and config it on the same IP range and its set up for mac and PC, it can be seen and used via my PC both by using the ip address through explorer to see the config page and as an extra hard drive, but the macs just cant see it.
The only thing I do know is that the buffalo does show up on the macs if I turn off airport and hardwire the mac to the router.
Any ideas anyone, i dont really want to hardwire my macs again just to use this hard drive.
Thanks
Lee

Not sure why its working now, just one of those great technical things. All I have done is unplugged and moved the drive, used a longer CAT5 cable, and plugged it in to a different port on the router.... and now I can see it on the mac!!! how does that happen.

Issue with AFP (Buffalo Linkstation?) mounts on 10.5.7

I have a Buffalo LinkStation Pro which I use to share folders with on my local network. I have it set up so that AFP is used and user permissions are in use. With 10.5.6 I didn't have any problems.
However, after the upgrade to 10.5.7 on one of the shares a single directory won't show up in Finder (all other directories on the specific share show up fine). Looking at the volume contents in terminal shows the directory. Likewise, Lightroom can access it with content that was imported earlier. Lightroom can't access the directory when trying to import new content.
Disconnecting from the NAS and reconnecting with SMB instead of AFP shows the folder fine.
The problem and solution works on both of my Macs.
Is this an issue with the 10.5.7 update? The firmware in the NAS hasn't been upgraded and no other changes have taken place.

I was looking for something like this. I have just bought a WD My Book World NAS drive. I connected it to my old router (G) and discovered it was too slow to wirelessly stream high bitrate music or movies. I then bought a Belkin N+ router which resolved this issue. However I have trouble with the mounts. When I wake my MacBook from sleep I can normally see the drive under Shares in Finder, but after some minutes it disappears. If I Go -> Network in Finder it turns up, but will not connect. The funny thing is I can be streaming music from the darn thing without interruption! The network shares on the desktop also turns on/off erratically. I can still access the folder contents from these even that the drive is not visible in Finder.
The NAS is set up for AFP on all shares which should be ok. I have tried both dynamic and fixed IP address on the NAS, but my Mac gets it dynamically. I'll try a fixed IP for this.
People are talking about automatic mount of network resources on start up. I came from Windblows and do not know all the fancy Unix commands and config files stuff. So how do you folks do this?
Will be much appreciated, thanks!

Can't write to Buffalo Linkstation

Similar Messages

Maybe you are looking for