Can Teredo for Microsoft DirectAccess work in the DMZ of an ASA 5510?

I'd like to find some way to get Teredo to work with our DirectAccess implementation. To do that, the external facing NIC on the DirectAccess server needs to be configured with a routable public IP address.
We have an ASA 5510 (running 8.3 (2)) that has switches on the Internal and DMZ interfaces, but connects directly to our Internet router through the External interface.
So, I do not have a switch that will allow me to connect our DA server directly to the edge. Short of buying a new switch and putting it outside of the firewall, I wanted to see if there was a way to configure the ASA so that Teredo would work in the DMZ.
Our current DMZ has 2 barracuda devices (spam and web filters) using static NAT objects. The IPs are all 192.168.x.
Is there some way of getting the DirectAccess external interface to work in the DMZ with a public IP address (and our ISP's gateway) without mucking everything else up? I've read about transparency mode, but I cannot figure out if that would affect our other devices.
Thanks in advance!
-Brad

Hi. I'm not 100% sure.......... But I think With UAG service pack 1 or 2 you no longer require a publicly routatable address for the external interface of the UAG server. You can now add the UAG server to your existing DMZ without affecting the addressing. Then you allow the Teredo tunneling traffic to the server.
HTH

Similar Messages

I have downloaded updates for microsoft office and now the internet wont work - any ideas?

I have downloaded updates for microsoft office and now the internet wont work - any ideas?

If you want to simply do a 'fresh' install (versus wiping out all of your data and doing a 'clean' install) simply boot to your Recovery partition (hold down the Command and R keys whilst booting) and when the Recovery screen appears, elect to freshly install OS X.
Don't know that will solve your problem, though... did you do the 'automatic' update or download the update as a disk image (.dmg)? I wouldn't think that would be causing your problems...
Clinton

I have a pioneer 50 inch plasma   I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.   The receiver has two HDMI inputs in the back.

I have a pioneer 50 inch plasma + I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.
The receiver has two HDMI inputs in the back. However they say they are not for PC's. Furthermore they must be set up by going to the home menu.    I tried everything, but I can not get the receiver to talk to the Apple TV. I even tried a connector that uses an HDMI to the Apple TV that has the other side of the cable as 5 RCA cables. I could not get the receiver to see the Apple TV.   I have a newer TV in the house, it has no problem talking with the Apple TV. But this older system seems to be handicapped in its ability to talk with the newer Apple TV system.
My Email is [email protected]
Do you have any suggestions
Thanks
Bob

I could not access the Apple TV on the television.   If I put the Apple TV directly into by TV, I have an external sound system (entertainment system), therefore I worry that I would by pass the audio.
Thanks for taking your time to attempt to help!   Any more suggestions would be greatly appreciated.
Bob

HT4111 can headset and bluetooth speaker work at the same time?

On my iPad, can the headset option and a bluetooth speaker work at the same time? I am using the headset to listen to music, but I want my spouse to be able to hear the same music using a wireless bluetooth speaker in the other room.

Sorry, of course I tried it and it did not work!
To clarify, can it be MADE to work? The basic hook up does not seem to allow for both. I was hoping an intellengent, helpful person might be able to assist a novice.

I can't get Illustrator to work in the Yosemite Beta. Can anyone help?

Hi there,
I can't get Illustrator to work in the Yosemite Beta. Can anyone help?
Much appreciated,
Jon

Thanks so much for reaching out!!!!
Here’s what I am experiencing more specifically:
1. Illustrator is not showing up in my Application folder.
2. My creative cloud app manager says that Illustrator is installed.
3. I try to download it from Adobe.com and it never initiates the download.
Does that ring any bells?
Thanks so much for your help!
Grateful,
Jon
Jonathan Bailey
Co-founder at Lightstock
(214) 284-2597
@jonathanrbailey
On Wed, Oct 1, 2014 at 5:08 PM, Monika Gause <[email protected]>

How do I get the Speech function for accessibility to work in the Windows 8 version?

How do I get the Speech function for accessibility to work in the Windows 8 version? There is no "File" option where you would normally find it. I tried using Narrator from Windows however it cannot read "explorable text" I guess

Adobe Reader Touch (Windows Store app with "modern" UI) is not really accessible.
If you have a device running the Windows 8 operating system (as opposed to the Windows RT operating system), you can install and run Adobe Reader XI (desktop app with classic UI), which offers better accessibility support for screen readers. It also has the "Read Out Loud" functionality.

Oracle 11.1.0.6 - Can more than one database work of the same installation

I am in the process of setting up 3 production 11.1.0.6 databases in a RAC Linux RH4 environment (approx 40GB each in size), question is can I get all 3 databases to work of the one Oracle Database installation i.e. can all three separate database work of the same set of binaries and from the same Oracle_Home?
As far as I know the only items that will be different of those values in the tnsnames and listener files.
Thanks

Lets back up and clarify terms.
A 3 node RAC cluster has one (1) and only one (1) database. Three (3) instances but only one (1) database.
If you are talking about something else you need to be very clear in your description.
Assuming one database and three instances the listener and tnsnames files should be identical. And, as Oracle creates all of this during dbca installation, why is it a concern?

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

HT4623 I have purchased a Epson Workforce 435, can't AirPrint, will this work with the first gen iPad?

I have purchased a Epson Workforce 435, can't AirPrint, will this work with the first gen iPad?

Also i forgot to add after a night of searching how to turn the Epson Workforce 435 printer into Airprint friendly and not iPrint (which are 2 completely different things) i donwloaded a program called (AirPrint Activator) from HandyPrint. The link is below to download the software. Once i installed the application i set my printer to be shared over my Home Network (Wi-Fi Network). Once you have done that, open the AirPrint Activator application you have just downloaded, swtich it ON from OFF mode, and then you should easily see your printer name in my case EPSON Workforce 435 and then just close the application. Then go to your IOS Device like your iphone/ipad/ipod touch select a picture that you want to test print or even an attached PDF from your email, and select Print in the share button. You will then be prompted to select your printer. Your printer you automatically be recongised then just select print. And now you have a complete AirPrint ready printer with a Printer that doesnt even support the function. Im sure you can do this to all Wireless Printers, even if they came out before Apple AirPrint service launch.
And also if you still need guidance and a video to follow from just click the Youtube link below
http://www.youtube.com/watch?v=9r75m_VUr0E
Download AirPrint Activator Link
http://netputing.com/handyprint/
I hope that this helps your question and enjoy your day
Kind Regards
Ahmed

When I can appear for SAP XI certification after the online training?

Hi,
Can any one please tell me when I can appear for SAP XI certification after the online training? Also am I eligible for appearing SAP XI7.0 certification if I do SAP XI3.0 training? If yes, what are the additional material I should learn to pass the exam.
Regards,
Praveen

Any day you can appear the exam, after your training is over. mainly they can consontrate on the Adapters you can eligible for XI 7.0 (now it is PI 7.0). No need of XI 3.0 knowledge.

HT1277 Automatic set up for mail isnt working, on the "welcome to mail" pop up its not recognising my password and gives me no option to reset, which password should I be entering? Im assuming its the one for my Mac ? also tried my Yahoo one but no joy...

Automatic set up for mail isnt working, on the "welcome to mail" pop up its not recognising my password and gives me no option to reset, which password should I be entering? Im assuming its the one for my Mac ? also tried my Yahoo one but no joy.....

start mail then:
Preferences> Accounts> click the [+] icon and fill in the blanks.
select POP account
Here are the basic server settings for Yahoo! Mail:
Incoming Mail (POP3) Server: pop.mail.yahoo.com (Use SSL, port: 995)
Outgoing Mail (SMTP) Server: smtp.mail.yahoo.com (Use SSL, port: 465, use authentication)
Account Name/Login Name: Your Yahoo! Mail ID (your email address without the "@yahoo.com")
Email Address: Your Yahoo! Mail address (e.g., [email protected])
Password: Your Yahoo! Mail password

The usual colored dots for closing or shrinking a program do not appear on mail so I can shrink what I'm working on the check some other zone. How do I make these buttons appear?

OSX on I mac 1.4 GHz intel Core i5 8 gigs 1600 MHz ddr3
mail. the colored dots to close or shrink open programs don't appear on mail. So I can shrink what I'm working on in order to check something on some other application and must closet using C Q.

jpenfold,
While using Mail, press the esc key, or go to the upper right hand corner of the mail window and select the blue icon:

Can you open microsoft windows documents with the pages app?

I am a new Mac user and i am considering downloading pages. On my PC i use Microsoft word and i was wondering if anyone knew if i transferred these files onto my Mac could i open them in Pages?
Thanks

Jo,
Give it a try. It should work. That's what the free iWork trial period is for. Not sure if the Mac App Store has a free trial, so indeed, you'll want to look for the normal download.
Jerry

Can you have multiple users working off the same Mac pro at the same time with multiple monitors but doing different things?

I'm buying desktops for a start up company and was wondering if I could purchase a single Mac Pro and run multiple monitors to allow multiple users to work on the computer at the same time. These users would be doing different tasks but I would hope to accomplish that on a single desktop. I know that screen sharing is possible but with only one user controlling both of the screens. Thanks in advance, sorry for my apple ignorance!

A lot of companies are buying or leasing laptops to be used at the office by day, and carried home at night.
Some companies are doing "Bring your own device". Bring a device to receive email -- computer/smartphone/tablet you already have, or have an allowance to buy one for your use.
If Capital is short (and when is it not) leasing computers, to be turned in a few years, can be a huge savings because the cost is expensed as incurred. The alternative is laying out cash today, but not being able to expense the cost this year. Instead, the computer expense must be recovered over their useful life (often five years) through depreciation.

HT4929 OS 10.5.8: Can't get mail to work using the recommended icloud settings

Grandma has a G5 imac running 10.5.8 and a .mac account under my master account. Moved her to icloud today, and can login via icloud.com and can see her mail there. Read the article, and using 'Mail' (Vs 3.6)on her mac, deleted her old .mac account, and tried to set up a new account manually, using the settings in the article:   imap.mail.me.com, SSL on, her usual user name, and her password (which, btw, works fine on the icloud.com site)
Also, for outgoing, used smtp.mail.me.com, SSL, etc, etc
Tried it 5 times, doesn't work.
Watched a youtube video, where it worked, followed exactly, didn't work! Help, anyone?   Thanks

I found the answer to this problem on a Nov 2011 posting. Amazing that the current icloud migration notices don't clarify this:
If you were to start a brand new icloud account, they would require at least 8 characters, upper and lower cases, including numbers. If however you are migrating a .mac or .me account to icloud, your old password may not meet those requirements. So, icloud keeps rejecting the attempt to set up an account via the 'Mail' app.
You need to go to   http://appleid.apple.com     to sign in with your old password, then change to one meeting the new requirements. Do not use http://iforgot.apple.com
Thanks to DendeNYC!!!!

Can Teredo for Microsoft DirectAccess work in the DMZ of an ASA 5510?

Similar Messages

Maybe you are looking for