Can TestStand 3.1 have an expression (or variable) for a numeric limit in a numeric limits test?

All I see is a chance to enter constants in the high and low limits.
What about a local variable?

Hi,
There is an example in the teststand examples folder which will allow you to use an expression in the limits file.
This maybe a be a solution for you.
Regards
Ray Farmer
Regards
Ray Farmer

Similar Messages

  • I have a MBP and have used boot camp to make two partitions.  I screwed up and reformatted the PC side.  I'm trying to use boot camp to get to the pc side now and it says it can't.  I have to download some helps for windows.  I did that, but it still won'

    Then... I tried to reformat using the start up disk and reloaded everything.  When I tried to use boot camp I still get the same message.  When I check disk utility, I still show two partitions...same as before... I just can't use the pc side.  What's up, please?

    I also have Jolly's problem. I found the iMovie 9.0.9 folder and tried to launch the older version of iMove. It would not launch. I removed all of the iMovie preferences from the Preferences folder, removed iMove 10 from the applications folder, and restarted my Mac. iMove 9.0.9 still won't launch and I can't access my videos created with the older version of iMovie. Is there a way to uninstall iMovie 10 and reinstall iMovie 9.0.9?
    I am running Yosemitie on a  iMac.
    Paul

  • Can't set up "older" Airport express as booster for "new" Airport network?

    I upgraded to a new airport express (the 802.11n) and want to use that as my primary airport in my house. I have an older airport express that keeps giving me error setting up as a WDS when I reinstall the factory settings to set it up as a booster. Is this an impossibility or am I just missing a step? Thanks.

    I was having trouble having the network name show up in the which-network-to-join window. It would be blank and then give me that error message.
    In a WDS configuration, you do not use the "join an existing wireless network" options.
    The following are the basic steps:
    (Note: To facilitate the WDS set up, place the base stations within near proximity of each other during the set up phase, and then relocate them to their desired locations when complete. Also, jot down the AirPort IDs (MAC addresses) for each of the base stations to be used in the WDS. The AirPort ID and is printed on the label on the bottom/side of the base station.)
    Main Base Station Setup - 802.11n AirPort Express Base Station (AXn)
    o On the Mac click the AirPort status menu in the menu bar, and then, choose the wireless network created by the AXn.
    o Open AirPort Utility; Select the AXn, and then, choose Manual Setup from the Base Station menu.
    o Click Wireless in the toolbar, and then choose “Participate in a WDS network” from the Wireless Mode pop-up menu.
    o Click WDS and then choose “WDS main” from the WDS Mode pop-up menu.
    o Select the “Allow wireless clients” checkbox if you want client computer to connect to this base station.
    o Click the Add "+" button and enter the AirPort ID of the AX.
    o Click Update to send the new settings to the base stations in the WDS.
    Remote Base Station Setup - 802.11g AirPort Express Base Station (AX)
    o Click the AirPort status menu in the menu bar, and then, choose the wireless network created by the AX.
    o Open AirPort Utility; Select the AX, and then, choose Manual Setup from the Base Station menu.
    o Click AirPort in the toolbar and click Wireless. Choose “Participate in a WDS network” from the Wireless Mode pop-up menu, and choose the same channel as the main base station from the Channel pop-up menu.
    o Click WDS and choose “WDS remote” from the pop-up menu.
    o Enter the AirPort ID of the main base station in the WDS Main field.
    o Click Update to transfer the settings to the base station.
    (ref: Pages 42-46 of "Designing AirPort Networks.)

  • I can only import emails from outlook express to TB for one identity. How do I import emails for my other account identities?

    I'm using a portable version of Thunderbird because I want to use TB to collect emails for a few different accounts that I have scattered on different machines.
    For example I have [email protected] on machine one and machine two. [email protected] is also on machines one and two.
    After setting up accounts one and two in the portable app I can only import the messages for account one. I have tried many times over the last two days. Thunderbird does not want to import the messages for account two.
    What do I need to do to import emails for multiple accounts into Thunderbird?

    Does [http://kb.mozillazine.org/Import_from_Outlook_Express#Importing_more_than_one_Outlook_Express_identity this method] for identities apply to your setup?
    Keep in mind also that OE messages are eml files that can be dragged directly from Explorer to a TB folder, e.g. one created under Local Folders.

  • I just downloaded the latest version and now I can't load farmville - have to go to IE for this - meh!

    I just updated to the newest version of firefox - when i'm on facebook and click on farmville it begins to load but stops before the "bar" is to the end - then I'm stuck --

    Right click on top of screen in tabs bar and make sure menu bar is checked it should show in upper left screen if checked. Select tools/options/general. type in google for home page and then select ok. this should do it for you.

  • Does T61p can work with any USB3.0 Express Card?

    Does T61p can work with any USB3.0 Express Card?
    For example AKA BC398 with chip NEC 700200?
    Or any other?

    i don't think many people have tested these cards, theortically it should support them, but not at the full speed. Since the ExpressCard slot is 1.0 standard.
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Oracle DB 10g express edition & APEX for application development for free?

    Can we use Oracle DB 10g express edition & APEX for application development for free? Are there any license fees?
    Thanks

    Hi,
    both Oracle DB 10g express edition & APEX for application development is free.
    Regards,
    Kartik Patel
    http://patelkartik.blogspot.com/
    http://apex.oracle.com/pls/apex/f?p=9904351712:1

  • I can't print wirelessly using Airport Express.  I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.

    I can't print wirelessly using Airport Express.  I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.  I've tried several USB connectors, and several different ports on my USB hub; same result.  I need to have the HP connected to the hub 'cause from there it's connected to our desktop Mac.

    Hi,
    I am currently replying to this as it shows in the iChat Community.
    I have asked the Hosts to move it to Snow Leopard  (you should not lose contact with it through any email links you get)
    I also don't do Wirelss printing so I can't actaully help either.
    10:01 PM      Friday; July 29, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work?

    I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work? And one more thing about the setup, the linksys router shich acts as a base is in a different room as the airport express which i wanted to use for airplay. So I'm hoping to hook up the Airport express via wireless signal. If i can set it up, can someone pls help me out by posting detailed instructions. Thanks so much!

    The first message that AirPort Utility will display during the auto setup will be that the Express will be confgured to "extend" the network. When AirPort Utility analyzes the network further, and sees that the Express cannot "extend" the 3rd party network, the next message will indicate that the Express is being configured to "join" the wireless network.
    Once the Express is configured, if you later go into AirPort Utility to check the settings under the Wireless tab, you will see that the Wireless Mode is indeed "Join a wireless network".

  • Can I set up to connect 2 or 3 airport expresses to have a stronger wifi signal for a larger area?

    can I set up to connect 2 or 3 airport expresses to have a stronger wifi signal for a larger area?

    Theoretically yes. It will really depend on your situation. Please review the following Apple Support article to understand what is possible with the AirPort base stations and post back with any questions or help in setting up your extended network.

  • I have logic express 9.1.7, can i upgrade to logic pro

    I have Logoc Express 9.1.7, can I upgrade this to the latest Logic Pro app? If not, will all my plug ins, instruments etc work if I am forced to purchase the new app?

    I think you'll be able to run okay in the new version. The other features you'll get are: Better mastering tools, a new synthesizer (sculpture) and the Space designer reverb. I think they are all
    Best wishes

  • Can logic pro 9 be upgraded if i have the Express version?

    HI,
    Can logic pro 9 be upgraded if i have the Express version?
    because when i try to do it, ask me for my Logic Studio SNr. and i just copy my Logic Express SNr. and doesn't work !
    Is that normal?

    I'm not sure I understand the wording of your question.
    If you mean "Can I upgrade Logic Express 9 to Logic Pro 9?" the answer is yes, you can.
    When you get the upgrade, if you already had LE9 installed on your system, the installer will already know your existing serial number, and it will be asking you for your new serial number of the upgrade. If you are trying to put in your old serial number here, this won't work, it's the serial number of the upgrade it's asking for.
    If you are having serial number issues and believe you are using the correct serial numbers, then you'll need to contact Apple for help.

  • I have the airport express as router can I buy the new airport express and use my old airport to extend my net?

    I have the airport express as router can I buy the new airport express and extend my net?

    Things can get confusing pretty quickly since there are 3 different versions of the AirPort Express.
    If by "old", you mean you have Model No A1084 or A1088 AirPort Express (look at the label on the side of the device for the Model No), it cannot be used with the "Extend a wireless network" feature of other newer Apple routers.
    If your AirPort Extreme is "square" shaped with rounded corners, then the "old" AirPort Express will not work with your AirPort Extreme using the "Extend a wireless network" settings.
    You could use a "previous version" AirPort Express, Model No A1264 to "Extend", or the "new" AirPort Express, Model No A1392, for that purpose.
    If your AirPort Extreme is a simultaneous dual band product, then the "new" Express would be able to "extend" both bands.  The "previous" AirPort Express (Model A1264) would be able to extend only one band, since it is not a dual band device.

  • I have a .mov file that is 59 gigs.  Is there a converter that can reduce the file size with minor resolution loss so I can import it into final cut express?

    I have a .mov file that is 59 gigs.  Is there a converter that can reduce the file size with minor resolution loss so I can import it into final cut express?

    Open the file in QuickTime Player. Then do Tools > Show Movie Inspector.  What does it say for Format and FPS?
    At 59GB, I suspect you have either a 4 hour DV video or a 1+ hour video that was converted to Apple Intermediate Codec.   If it's either of those, you can import it directly into FCE provided you select the appropriate Easy Setup first.  Your clips have to match the properties of the Easy Setup you are using.
    If it's neither DV or AIC then you need to convert it to one of those codecs.  (QuickTime/DV or QuickTime/AIC)  Many people in this forum rely on MPEG Streamclip (it's free and works great).

  • How can Teststand have Switch Executive dynamicall​y change a route.

    I have created routes in Switch Executive and when I try to connect these routes thru Teststand via Action Properties under the Switching Tab.  I get an error saying:
    Details:A reserved for routing channel required for connecting this route is already in use by another route.(Error = -29031) [Error Code: -17500, Operation Failed.]
    I am trying to connect two different routes by the following syntax in the "Routes to Connect"  section:
    "Route1 & Route2"
    It seems that in Switch Executive Route1 and Route2 are both using the same reserved for routing paths.  For example:
    Route1:      [C0->MatrixA/r1->C2]
    Route2:      [C1->MatrixA/r1->C5]
    So my question is then...How can Teststand make Switch Executive change the route path?  I have r0, r1, r2, and r3 set as reserved for routing.  Thanks for your help.

    Thanks for your help.
    For situation 1: 
    When I use this method Switch Executive dynamically chooses a route but its always the same route.   What I need to do is have a set of pins that use only one route and another set of pins that uses a different set of routes.  You can think of it as c1 is one lead of a multimeter and c2 is the other lead.  I need to be able to connect c1 on any other column besides c2 and also c2 to be able to connect to any other pin besides c1.  Since in Teststand I need to connect c1 and c2 simultaneously as a step I get an error because both are trying to use the same route.
    Also when I change the route from: 
                                                      ​        channelA->matrix/r0->channelB
                                                      ​   to: channelA->matrix/r1->channelB,
    then when I save and close Switch Executive and I reopen it the channels automatically routes itself back to channelA->matrix/r0->channelB.
    Is there any way that I can save these routes to my configured route?

Maybe you are looking for