Can the 2nd monitor be an extended desktop?

i know its a silly and simple question but im new to hooking up a second monitor. So if i get the right connector from the apple store and hook up a second monitor can it be an extended desktop or will it only be a mirrored image?

Can the 2nd monitor be an extended desktop?
Yes.
(52224)

Similar Messages

How can i use my tv as the 2nd monitor

hi, how can i use my tv as the 2nd monitor, for example pull a video from desktop to tv for windows7, the computer is hp omni 120 all in one. because i have a cable for it that connects to the tv but i dont know how to connect the pc to the tv. i tried to go on the 'change screen resolutions' but that didnt help. thanks

Hi,
Here is it specs:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03343048#N1221
You can only see:
Front:
1 - Screen area
2 - Microphone array
3 - Webcam camera
4 - Stand
5 - Speakers
Back:
1 - Optical disk drive (actually right)
2 - Stand
3 - Kensington lock slot
4 - Power button
5 - Memory card reader and other I/O on left side
6 - Motherboard back I/Os (specific I/Os are model dependent)
7 - Activity indicator
8 - Power connector
9 - LAN (ethernet)
10 - Four USB 2.0 ports
11- Audio port (actually left side)
Left:
1 - Hard drive activity indicator
2 - Memory card reader activity indicator
3 - Memory card reader
4 - Two USB 2.0 ports
5 - Microphone jack
6 - Audio port
Right:
1 - Optical disc drive
The only hope is "6 - Motherboard back I/Os (specific I/Os are model dependent)" area:
Please check area 6 above. As mentioned in my previous reply: Most likely your machine has no video out port.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Using 2 monitors. I can't get my Layers Pallet to move to the 2nd monitor

I'm using 2 monitors. I can't get my Layers Pallet to move to the 2nd monitor screen. It is simply locked to the right side of my 1st monitor. A solution would be great. Sorry if it's a noob question.
Thanks for your time.
Monty

No problem. We've all had newbie questions at one time or another.
However, I am going to have to put on my clairvoyant hat and guess you are running Photoshop 10.0.1 (CS3). :/
In CS3, do NOT attempt to move the palette well, i.e. the dark gray zone above the palettes. That you cannot move.
Instead, grab each palette individually by the light gray bar just at the top of each palette.

Screensaver eMac monitor while in extended desktop mode?

Officially, eMacs can mirror to an external display but cannot do extended desktop. Since my 2005 eMac's built-in monitor is only functioning correctly at low resolutions (see http://discussions.apple.com/thread.jspa?threadID=2013835), I'm using a program called Screen Spanning Doctor to run it in extended desktop mode. My eMac is running Mac OS 10.4.11.
*I'm searching for a way to run a screensaver and/or turn off the eMac's built-in monitor while I continue to use my external monitor.* Is that possible? I've configured my external monitor to function as the primary display while the eMac's built-in monitor is the extended display.
Thanks!

Hi all,
I've found a solution to my problem!
I'd forgotten that Mac OS X allows each monitor in an extended desktop configuration to have its own desktop picture. I copied all desktop pictures to a new folder, used the procedure described at http://www.macworld.com/article/51937/2006/07/savedesk.html to copy all Apple screensaver photos to that new folder, and then configured System Preferences => Desktop & Screen Saver => Desktop to use that new folder and change the picture every five seconds. EDIT: I selected "Random order" too.
This won't be too distracting since I'm using an external monitor as my primary display. Also, this solution should require only a tiny percentage of my computer's resources. Thanks again to all of you for your great ideas!
Message was edited by: gobbles414 (original)

Windows 10 shows the 2nd monitor has 1920x1080 but actually it is 50% less around 1080x840

The resolution of the 2nd monitor, a Vizio VF551XVT 55-inch 1920x1080 HDTV connected through HDMI cable, shows 1920x1080 (Recommended) on the Windows 10’s Display Screen Resolution setting utility but the true resolution of the 2nd monitor is less than 50%; around 1080x840. All applications on the 2nd monitor displayed their header & boarder frames twice wider on screen, which waste/occupy lots of the 2nd monitor’s display area. Please advise how to correct this critical lower than the set/expected resolution problem of th 2nd monitor. Thanks. The 1st/primary monitor in this case is a mobile PC Display (1920x1080), Lenovo Z710 Intel i7 4710MQ notebook with NVIDIA 840M GPU. Previously running under the Windows 8.1 OS with the same configuration, the 2nd monitor resolution was also displayed incorrectly but just initially right after the Windows 8.1 reboot, i.e. 2nd monitor shows 1920x1080 resolution but actually the 2nd monitor is about the same as Windows 10, the actual resolution is much/50% fewer than 1920x1080. However, the resolution of the 2nd monitor (HDTV) under Windows 8.1 can be corrected (worked around) by switching the main display from 1st to 2nd monitor, then switching main display back from 2nd to 1st, but such Win 8.1 work around doesn't work for Windows 10 OS . Also, please advise whether Lenovo, MS Windows or NVIDIA is responsible for the displays re-position issue. The re-position issue is, when a TV, PC, shared 2nd monitor is disconnected to watching TV, etc., Windows OS currently moves all the display positions, both active and minimized displays, from 2nd monitor to 1st/main monitor, but ideally would be just moving/re-position the active displays to the main/1st monitor and maintain/leave those minimized display positions intact, so when 2nd monitor reconnects back (done watching TV), user doesn’t need to re-align all the displays back to 2nd monitor again. Thanks for helps.

If you won't lose anything and if it is not a big hassle, I would re-install.
Mainly because Win 10 TP is, after all, a beta OS. Too many possibilities of bugs and glitches. It is better off to reinstall.
The latest build 9879 has a ISO download link. Use the ISO and burn it to a bootable DVd. Then use the DVD to do a clean reinstall.
http://windows.microsoft.com/en-us/windows/preview-iso-update?os=win10

HT4314 can the 2nd generation ipod be updated with 4.3ios

Can the 2nd generation ipod be updated with 4.3 ios software/updates

No. iOS 4.2.1 is the latest for the 2nd generation iPod touch.

Can the 30" monitor run on the new mini?

Can the 30" monitor run on the new mini and is the new mini more powerful/faster than my current original 20" iMac intel duo?
Thanks in advance for everyone's feedback!
PS. I know the 30" is due for a refresh and would wait....

You would need the mini-DVI to Dual-Link DVI adapter, but the 30" would work with that up to it's maximum 2560x1600 resolution.
However, while the new mini will be a little faster than your existing 20" iMac (assuming by 'original' you mean the 2.0GHz 'early 2006' model), it's not going to offer you a significant performance boost. The mini would offer you greater maximum RAM (4Gb instead of your current 2Gb limit) and has a significantly faster bus and greater L2 cache, and it has 11n wifi rather than your existing 11g, plus a number of other minor enhancements, but you need to consider whether the benefits in terms of better performance and greater flexibility of buying this system, and the display to go with it, are sufficient to justify the costs.
Much may depend on which software you are using, or plan to use. If you are habitually running legacy software which needs Rosetta, and often need more than one such application open at a time, your maximum of 2Gb RAM may be limiting system performance overall by quite a bit. A mini could help significantly simply by allowing you more RAM. Alternatively, if you are running little more than basic and common applications such as web browsers, email, etc, and have just 1Gb RAM, you might find that a better investment would be to increase the RAM in your iMac to 2Gb, and keep using that for a while longer - perhaps while you decide exactly what your future needs are going to be and thus which hardware is best suited to meet them.
Alternatively, if you are just feeling that it's time for the iMac to retire and you want a new system, the new mini looks to be a very credible choice for a wide range of users - and pretty good value too!

Can the command line application be extended?

I would like to add command like keys etc..Is this possible?

Correct me if I am wrong, from what I understand, beanShell is a scripting language which interprets the Java language. Yes, I could connect to coherence cache and run any commands I want. However, that won't include the commands which are already prefined in the tangosol command line, would it?
If I am wrong, I would appreciate if you could show me an example of beanShell and the command line application.

Watch fullscreen movie on 2nd monitor & work on my MBP @ the same time?

I hooked up a 2nd monitor to my MBP (mini to VGA) and figured out how to have an extended desktop. It's a little tricky adjusting where the pointer will be (I don't totally understand it, but with trial and error and lots of persistence, I finally got it to ALMOST be set up the way I'd like).
I have a movie (.avi file) playing on the 2nd monitor and I'm able to work on my MBP, but I can't figure out how to view the movie fullscreen because when I get the 2nd monitor fullscreen, my MBP screen goes fullscreen as well (and of course the dock and any form of control disappear as my MBP screen is just dark and blank).
Does anyone know the trick to getting the setup that I want? FULLSCREEN 2nd monitor to watch .avi files while working on my MBP???
I could really use some help on this one! THANK YOU, oh knowledgeable one(s) who reply!!!

You won't be able to do it with the included QuickTime media player. But it can be done with other media players like MPlayer or VLC I am pretty sure. Haven't had this exact need myself but have seen other similar threads and recall the above being recommended. Good luck.

Can't run flash player in full screen on 2nd monitor

Hi all! I have a laptop with dual video displays. The main
display is the laptop's LCD and the 2nd display is a 19" LCD
connected via VGA cable. I want to let a Flash movie loop endlessly
on the second monitor while I continue to work on the laptop. When
I drag Flash Player 8 over to the 2nd monitor and start the movie,
I can hit maxmize and it will take up the entire 2nd montior as it
should...with the file options and boarder around as expected. I
then hit Ctrl-F to go full screen and it snaps directly to the
laptop's primary monitor. I tried it at work where my desktop has 2
displays and the same thing happens. I need to force Flash player
to run full screen on the 2nd monitor and cannot find a way to
accomplish this. Any help is appreciated because it's driving me
nuts. I can always make the external monitor my primary but then
the start button and all my icons move there too and that is not
acceptable. Thanx!

Seriously? No one has any thoughts about this? I can't
believe I would be the first to come across this issue.

2nd Monitor died - How does one grab tools back from "that" desktop?

Hi -
One of our two monitors died. There are tools on the 2nd monitor's desktop that we can't "see" until the 2nd monitor returns. How do we pull those tools over to the main desktop?
Also, there are a few finder windows that are too large to grab the bottom scaler and shrink them back. (There is no tool bar on the top of the second monitor giving just a little bit more room.) Is there a minimize button somewhere for "finder" windows?
Thanks!

Ps - just found the "zoom" button on my own - so - I have the finder windows under control - now to learn how to get to that other desktop without the view into the other desktop!

Helix can't boot without a 2nd monitor attached

Hi,
I maintain a Helix (36984RU) that gets used for presentations. It will not boot to Windows without a second monitor attached. I can hear the fan spin up and the unit gets warm, but the screen remains blank. The only thing I can do is to shutdown by holding down the power button.
When booting with a 2nd monitor or projector attached, the startup Lenovo logo appears on the 2nd screen and the laptop screen remains blank. When the Windows login screen appears, it appears correctly on the laptop screen. I've checked the Windows Screen Resolution page and it correctly shows the laptop monitor as the primary monitor.
This issue presents itself whether or not I disconnect the 2nd monitor prior to shutdown/restart, or whether I remove the 2nd monitor before restart. It also does not make a difference if I start in tablet or docked mode.
I've updated the BIOS to version 1.29 and have checked that the boot display device is set to Thinkpad LCD, and not either of the two displayport options.
Any tips on this would be greatly appreciated,
Thanks!

I don't know what it is - I have Enable Transmit on the Program monitor to enable it to do so, and I can't go back to 7.0 or 6.0 as I'm now working on projects in 7.0.1 and don't want to keep chopping and changing.

What cable do I need to connect a 2nd Monitor from the thunderbolt port?

Hi I have got one of the brand new iMac's with thunderbolt ports - what cable do I need to connect my Imac to a 2nd display either VGA or DVI - also is there a budget version about as well as I am sure its going to cost a lot from the apple store

Thanks I understand that I need another cable and have that from when I connected my old PC to the 2nd monitor.
http://store.apple.com/us/product/MB570Z/A?mco=MTY3ODQ5OTY - is this the one I need if going to DVI
I just dont want to waste more money on a cable that says its for an imac to 2nd screen and find it doesnt fit
For info my iMAC is the latest version (27" with the 2 thunderbolt connections and 1 firewire)
Thanks

PowerPc G4 Extended Desktop

Hi there,
I was wondering if someone could help me? I have a 533 MHz PowerPc G4 and have just attached 2 monitors... hoping for an extended desktop. 1 of the monitors connects to the VGA port direct and I also purchased a ADC to VGA Adapter to connect the 2nd monitor. At the moment it only shows mirrored screens and the display option in preferences will not let me click arrange.
I have a Ge Force2 MX graphics card, and looking through the apple forums, it says that I should be able to have extended desktop? I am running OSX 10.3.9.
Is this a graphics card problem? If so, do I need a whole new graphics card or is it possible to install a second graphics card. At the moment there is 3 slots free (1 is being used for a sound card) and the graphics card is in the AGP slot.
Hope someone can help.
533 Mhz PowerPC g4 Mac OS X (10.3.9)

An ATI Radeon 9000 Pro Mac Edition would be one relatively cheap and easy option. It's an AGP card and would replace your existing one, has an ADC and DVI connector and comes with a DVI to VGA adapter, so with your existing ADC to VGA adapter you'd be able to connect two VGA monitors. It came in 64MB and 128MB versions and was discontinued some time ago, although they seem to appear on eBay regularly.
http://www.ati.com/products/radeon9000me/radeon9000prome/index.html
The ATI Radeon 9200 Mac Edition is the only Mac compatible PCI graphics card I'm aware of that's still readily available new. It should work in conjunction with your existing card to drive a second display, has a DVI and VGA connector and comes with a DVI to VGA adapter. It doesn't seem compatible with OS 9 when installed in some G4s (including yours), but is supported under OS X.
http://www.ati.com/products/radeon9200/radeon9200me/index.html
Failing that I guess you could look for a twin-view version of the GeForce 2 MX or GeForce 4 MX on eBay that someone's pulled from their Mac whilst upgrading. As far as I'm aware they were never available retail. Which ever card you choose though, it needs to be a Mac version as a PC graphics card won't work.

Launch Apps to 2nd Monitor

Does anyone know if it's possible to launch an app and have it open on the 2nd monitor (non-primary) of an extended desktop? I know it can be opened and dragged there, but that's a pain. Windows has this functionality, I find it hard to believe OS X doesn't. Any help is appreciated.

Dennis,
Thanks for the reply. If by "quit" you mean minimize, then yes it does, but if I actually quite the application and reopen it, it reopens on the primary screen and I have to drag it again to the secondary monitor. At first I thought it might just be the app, but all of them do the same thing (iTunes, Safari, etc.) Is there any special setting that needs to be set in order for it to work?

Can the 2nd monitor be an extended desktop?

Similar Messages

Maybe you are looking for