Can the 309a printer be used wireless from an ipad2?

I would like to use my iPad2 wirelessly to print from my 309a all-in-one HP Photosmart Premium. How do i set this up ?  My iPad tells me to use airprint?  

Hi,
Is your printer in this list ?
   http://support.apple.com/kb/ht4356
If YES, please follow this:
  http://www.apple.com/support/ipad/assistant/airprint/
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Can I access printer options using airprint from my ipad?

    How can I access airprint printer options, such as cancel or page setup?

    You can cancel a print job from the Print Monitor. On the AirPrint Basics web page take a look at the
    Viewing the Print Queue
    section.
    There is no page setup in iOS. Some apps such as Pages let you pick a page size. Some apps fo not.

  • HT1595 i have an HD ready 3 D tv. not smart tv. i.e can the apple tv be connected wirelessly from the tv  or do I need additional connection?

    I would like to know if connecting the apple smart tv console requires any additional connections or does it plug straight into the tv where the lan cable would normally be installed?

    Welcome to the Apple Community.
    The Apple TV only connects to a TV with HDMI.

  • I can't install the new software 8.2 wireless from the phone only when I connect to my laptop

    need help to install the new software 8.2 wireless from my phone

    Howdy Punya,
    It sounds like you are unable to get your phone updated by downloading it directly to the device, and it only works when you connect it to iTunes. I would recommend you use the troubleshooting in the following article with different troubleshooting depending on the issue that it is having:
    Resolve issues with an over-the-air iOS update
    If that does not resolve, or doesn't address the issue, can you elaborate on what is happening when you try?
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • Can the Finger Print Reader be used for the Hard Disk Password at Power-On Boot Time on the W700?

    I own a W700 and I have enabled the Hard Disk password at boot time (I have 2 HDDs, so there are two password prompts).
    I always type in the passwords, but was wondering if the Finger Print Reader can be used instead?
    The Finger Print Reader works fine from Windows 7 logon onwards, but it would also be nice to use it at system boot time, after powering on.
    Please let me know if this is possible.
    Thanks!
    Solved!
    Go to Solution.

    Sorry I did not get back online quick enough...but the passwords are the same.
    For some reason, after my first cold boot, I was still prompted for the hard disk passwords.  I powered down again and when I powered back up, it signed me on all the way through.  So it was just a hiccup.
    All is good now and I'm very happy!
    Thanks for pointing me in the right direction.

  • Can the WAN port be used as LAN when AirPort Express (2nd Generation) is setup to join a wireless network?

    Can the WAN port be used as LAN when AirPort Express (2nd Generation) is setup to join a wireless network? (IE: 2 LAN ports)
    I haven't been able to get a clear answer on this. I believe the 1st generation would act as WAN/LAN depending on setting, but what happens with the 2nd generation?
    Thank you for your time.

    If the Express joins a wireless network wirelessly, in other words its WAN port isn't connected to anything, the correct way to connect a wired client to it is by using its LAN port.
    I don't know what would happen if you were to connect a wired client to its WAN port instead — it's just not supposed to be used for that purpose. It won't permanently break anything if you were to try it though. If you were, the worst that would occur is that your network would become unresponsive as packets continuously traverse its WAN port in a circular fashion, which might require that you power down your router to reset your whole network.
    If you are already using your Express's LAN port and you need another, the way to provide more ports is to purchase an inexpensive ($10 or so) switch. Connect it to the LAN port and as many other pieces of equipment as the switch's available number of ports.
    You're correct about the first generation with the single Ethernet port. It could be used in either capacity depending on its configuration.

  • MX 925 - how to force the printer to use paper from lower tray

    Hi' there,
    Several people seems to have the problem, that the printer "wants" to print from the upper tray, - I assume it's because it want's photo paper. Is it possible to FORCE the printer to use paper from the lower tray, when e.g. you have no photo paper, receive the error message, and just want to see the print?
    :-) Sogge

    I found a methoid that while clumsy, works. I have defined another printer on my windows machine that points to the same
    printer as my original printer defination. I have named this printer "Legal" and has defined legal paper as it's default. When
    I print to this printer( DECTYPE, DECNAME) it now defaults to legal.

  • Can the Time Capsule be used just to back up on an existing wi-fi network?

    Can the Time Capsule be used just to back up on an existing wi-fi network?    We just set-up a new Xfinity wireless modem which is supposed to be very fast, but Time Capsule set-up instructions indicate we need to use the Time capsule as the primary internet connection.   True?

    My mistake. Meant to reply to snorris3. Text is repeated below:
    Can I still use it as a back up device?   My new modem is also the router.
    Yes you can.
    The best way (and really the only way) to set up the Time Capsule would be to connect an Ethernet cable from your modem/router to the Time Capsule.
    The Time Capsule will produce a wireless network by default, but if you don't want to use that network, it is a simple matter to turn off the wireless on the Time Capsule and use it only as a  hard drive for backups.
    I would be very surprised if the Xfinity modem/router would even come close to the wireless performance of the Time Capsule, but that may be another discussion.
    If you elect not to use the wireless on the Time Capsule, then you will be backing up over the existing wireless network that you already have.
    That would be a shame, since a third to half of the total cost of the Time Capsule is tied up in the wireless router portion of the Time Capsule. If you want to use the existing Xfinity wireless network, you could save yourself quite a bit of money by simply connecting a USB or Firewire hard drive to your Mac for backups. But, it's your call.

  • When i use airprint from my ipad2 the text is barely readable.

    when i use airprint from my ipad2 it prints but i can barely read the text. very dim text.
    when i print from my laptop over wifi..no problem.
    Help.....
    thank you

    What make and model printer are you using? What app are you using to print?

  • Why can't I print a web page from my Android 4.1 phone to my 8500a printer? e-print is working.

    Why can't I print a web page from my Samsung Android 4.1 to my Officejet Pro 8500A. eprint is working, so I can send e-mails to my e-print address, but when I try to print a web page, it says that I don't have a printer. Can someone help me with this? 
    This question was solved.
    View Solution.

    Just received an update to the Android version of HP ePrint.
    It now has the ability to print web pages!  Thanks HP!  
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Can a C2890A printer be used with a laptop?

    Can a C2890A printer be used with a HP 15-1004dx laptop?

    Hi,
    It's time to buy a new printer.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Can the time capsule be used as both a time machine backup and NAS storage

    Can the time capsule be used as both a time machine backup and NAS storage?   I want to use the drive as external, wireless storage for all of my files so all my PCs, MACs and iOS devices can access the files.  Plus, I want to use the drive for backing up my iMac via time machine.  Can the time capsule device be used for both these purposes simultaneously?  If not, are the other suggestions on how I can do this?

    Can the time capsule device be used for both these purposes simultaneously? 
    It can, but is really not recommended. Sooner or later there will be a fight for space on the drive between Time Machine and the other files.
    If you have plenty of free space on the drive, you can do this......but.....have you thought about how you will back up the "other" files that are stored on the Time Capsule?

  • Can the time capsule be used as an external hard drive

    Can the time capsule be used as an external hard drive

    If you mean by usb to a computer no.. it is a network device only and has to be used via ethernet or wireless.
    It can be used standalone,, ie not plugged into an existing network.. but there are some steps required to make it work if you want internet connection at the same time. It is generally much easier to have the TC bridged into the network.

  • Can the ipad reminders app import tasks from the calendar app so I can enter items once?

    Can the ipad reminders app import tasks from the calendar app so I can enter items once?

    Depends on an account. The Tasks in Exchange will populate Reminders, and you can use Reminders in iCloud, but natively entering something in Calendar does not reflect in Reminders.

  • External USB not recognized on my iMac (intel) in Disk Utility, Finder as well as in Terminal diskutil list but is listed in System Profile, which includes the location ID of 0xfa400000 / 5.  Can the location ID be used to restore USB identity ?

    My 1TB Seagate external USB not recognized by my iMac (intel) in Disk Utility, nor in Finder as well as in Terminal "diskutil list" but it is listed within the System Profile, which includes the location ID of 0xfa400000 / 5.  Can the location ID be used to restore the identity of my external USB ?

    Hello JNotorious,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    USB and FireWire Quick Assist
    http://support.apple.com/kb/ht1151
    Have a nice day,
    Mario

Maybe you are looking for