Can the 5010 peer with 5548 for vpc ?

                   We are in the process of replacing a pair of 5010's with 5548s. The 5010 is fully loaded including FC expansion module. We have limited rack space avail which prevents us from setting up the new pair of 5548s to support vpc and then moving cables from old to new. As an alternative i was wondering if it is possible to shutdown the B path, replace the 5010-B with 5548-B, and get vpc up and running between the 5010-A and 5548-B then replace 5010-A with 5548-A.
We are currently using the following
- vpc portchannel to core switching (6500)
- vpc portchannel to edge switching (4948s)
- vpc portchannel to UCS Fabric Interconnects
- vpc portchannel to Netapp Filer (NFS/FCoE)
- port channel to single homed 2ks
- FCOE to Servers and Netapp
- FC portchannel to core MDS switches.
I am not as worried about the FC side of the house as I am the vpc side. Specific concern (based on some lab work a while back) is with QoS policies and consistancy checks, but as you can see from the list there is a lot to consider.
I am interested any insight or feedback on this approach.
Thanks in advance
DaveO

A Nexus 50x0 cannot be a vPC peer for Nexus 55xx due to different ways of VPC implementation between the two.

Similar Messages

  • Has anyone found any glow-in-the-dark earbuds (with mic) for the iPhone?   I'm looking for some that glow or light up so they can be seen when I walk in the dark.

    Has anyone found any glow-in-the-dark earbuds (with mic) for the iPhone?   I'm looking for some that glow or light up so they can be seen when I walk in the dark.

    In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
    So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
    If you are not able to access this camera from the local network, then this should be troubleshot first.

  • Can anyone help me with advice for a replacement hard drive

    Hi there,
    Can anyone help me with advice for a replacement hard drive and RAM upgrade for my Mac Book Pro 5,3
    Its 3 years old & running Snow Leopard 10.6.8
    I do a lot of audio & movie work so performance is important.
    The logic board was replaced last summer & I was advised to replace the hard drive then...oops
    Anyway it has limped on until now but is giving me cause for concern...
    I have found a couple of possibilities below...so if anyone does have a moment to take a look & help me out I would be most grateful
    http://www.amazon.co.uk/Western-Digital-Scorpio-7200rpm-Internal/dp/B004I9J5OG/r ef=sr_1_1?ie=UTF8&qid=1356787585&sr=8-1
    http://www.amazon.co.uk/Kingston-Technology-Apple-8GB-Kit/dp/B001PS9UKW/ref=pd_s im_computers_5
    Kind regards
    Nick

    Thanks guys that is so helpful :-)
    I will follow your advice Ogelthorpe & see how I get on with the job!!! Virgin territory for me so I may well shout for help once my MBP is in bits!! Is there a guide for duffers for this job anywhere??
    & yes in an ideal world I would be replacing my old MBP but I'm just not in a position to do that at the moment....let's hope things pick up in 2013
    All the very best
    Nick

  • Why can't i pay with ideal for my skypenumber? and...

    why can't i pay with ideal for my skypenumber? and without notifications up front!
    number

    Hi ronhermes,
    I hope you're having a lovely vacation!
    I think it may just be a matter of completing your our purchase through the US Adobe Store (not the Adobe Store in Greece). For more information, see "Are there any workarounds?" in this document.
    Best,
    Sara

  • Can i development program with EDK for uploading file to server?

    Can I development program with EDK for uploading file to server?How to avoid same name of files?
    Thanks!

    Hi ,
    thanks for the quick response.
    but the problem is supppose i have a excel sheet with 16 rows and 13 columns(so data).
    i am placing this file contents to appserver USING ABOVE fm.
    after that i am reading the file from appserver to create SO(idoc),i need  1row-3column data and 2row-2c data.like that.
    in unix we will get row data(after uploading to app server) as #mprn#2345# like this so easy to separate when reading.but in  MS NT OS 1row data getting stored in different rows in Appserver.so difficult to read.
    so the above mentioned FM is OS dependent or is there any way (any other FM) to get same kind of data in different OS.
    PLEASE SUGGEST OTHER WISE I NEED TO CODE BASED ON OS.
    REGARDS
    SARATH

  • On Apple TV. Can the USB port be used for a keyboard and mouse interface

    On Apple TV. Can the USB port be used for a keyboard and mouse interface

    A bluetooth keyboard can be used with the Apple TV.
    There is no need for a mouse with an ATV.

  • Can the H-Squared Air Mount for AirPort Extreme be mounted horizontally on a wall withOUT the Horizontal Adapter?

    Can the H-Squared Air Mount for the Airport Extreme Base Stataion (5th Generation) be mounted horizontally on a wall withOUT also having to buy the Horizontal Adapter (which costs another $14.95)?
    Are there mounting holes in the Air Mount to allow for that?

    Can the H-Squared Air Mount for the Airport Extreme Base Stataion (5th Generation) be mounted horizontally on a wall withOUT also having to buy the Horizontal Adapter (which costs another $14.95)?
    Yes, if you wanted to use a couple of L brackets, you could do this. The chances of the pre-drilled holes in the L brakets  lining up with the pre-drilled holes in the Air Mount are open to question, though. So, you may need to some drilling.
    I suppose you could design your own horizonatal adapter out of wood, but once you did that, you might as well use another piece of wood for the top shelf. Then, you don't need the Air Mount at all.
    Are there mounting holes in the Air Mount to allow for that?
    The Air Mount has a dozen, maybe more pre-drilled holes. As you might imagine, the Horizontal Adapter mates perfectly with the Air Mount.  The picture in the link below will give you a good idea.
    http://h-sq.com/products/airmount/index.html

  • Can the fields grow with the section expanding?

    Post Author: KennyG
    CA Forum: General
    Can the fields grow with the section expanding?There are several fields in one section of my report, all the fields are formatted with "Can Grow" checked and bottom border showed. In design mode, all the bottom borders stick to the bottom of the section. However, when print, the section may expand as some fields grow, but the rest fields can not expand automaticly with the section, so the bottom borders will not be at the same height as before. How can I deal with it? Is there any option about this?
    Any suggestion would be greatly appreciated

    Post Author: MikeA-ICE
    CA Forum: General
    One thought I have is to insert another section just below the one where the growing fields are and put a single line or individual lines under those fields. Move it up to the top of that new section and move the break between the existing section and the newly added one tight up against the bottom of the 'can grow' fields.
    Another possiblity lies in the fact that the "Can Grow" option has a formula attached to it. I don't know if it will work or not but maybe an If/Then formula could tell field B to grow if field A grows. I've never tried that but it may be possible. I'd think the first suggestion would be the one to try first.
    Mike

  • Can anyone help me with compressions for web streaming? So lost!

    Hi there
    I am so confused !
    I have the task of getting HD footage from my camcorder ready for quality web-streaming on a website. The clips need to be in mp4 format using the H264 codec. As we are dealing with HD footage, I want the viewer to be very happy with the picture quality. I must admit that most of my compression settings were kind of guess work and I was only judging my results by the final file size in relation to the video quality. I was getting file sizes of about 16mb per minute of video/ audio footage.
    I had been keeping my frame size at 1280x720 and my bit rates were about 2000-2500kbits/s. Bandwidth is a real concern as there will be alot of people streaming these videos and there might be over a hundred videos on offer at any one time. I found that bit rates any less than this were resulting in a poor picture quality.
    I have since learnt that what I was doing is completely wrong!
    I was told that my frame size was way too big for normal web-streaming of HD footage and also that my bit rate was too high and bandwidth hungry. I never knew that the bit rates I set when compressing my videos would have an effect on the bandwidth that would be used. I am obviously showing my ignorance!
    If anyone has anytime to help out someone who has no idea, I would absolutely love to know the answers to these questions:
    1. What is considered a good acceptable frame size to show HD quality footage? Maybe a size that if the quality is OK, they can also stretch the frame afterwards to fill their screen without losing too much quality?
    2. I want to use mp4 with the H264 codec for streaming, what is an efficient bit rate to set the compression at, so that the quality looks nice, but wont drain my bandwidth unnecessarily?
    3. Can anyone explain how the bit rates that I set for my compressions affect the way they are downloaded once they are on a website. Just cant get my head around this logic for some reason?
    4. What other compression settings should I be aware of (eg. keyframes etc)
    I feel so lost in all of this and would appreciate it tremendously if anyone can help me out.
    Dan

    If I select a bit rate of say 2500 to compress my videos at, what will that now mean for the end user? Will that mean that his connection will be forced to download that video at 2500kbp/s thus using alot more bandwidth?
    Yes and no. If the end user has a connection that allows them to receive data at 2500 and the source from the web can supply data at that speed then they'll be able to stream in real time. However, if either end doesn't hold up (the client's connection can't receive data that fast or the source can't send it) then end users will be forced to watch it on delay - letting a good portion of the movie download first. QuickTime will do this anyway - if you (as I do) embed a movie into a webpage, when you visit that page QuickTime will calculate how fast data is being sent and received, and decide when to start the movie based on that calculation.
    I was told that the bit rate I set when I compress these files locally on my machine, tell the streaming software how to allow users to download them - is that true or have I got all mixed up?
    You keep saying streaming and I'm not sure exactly what you mean. Streaming can either mean having a finished file on the web that people can watch with minimal downloading in advance, or streaming can mean sending a live event out over the web. I think you mean the first. In that case, there is no streaming software on the server side - it's just a file that gets sent to a client just like any other file. The bitrate however does tell the client software, like QuickTime player when to start playing the movie (As I alluded to above).
    If you really want to "stream" content - in other words allow people to go to page and start watching then I'm going to suggest you distribute in multiple formats. QuickTime has a number of presets you can use for "streaming", and these are usually small (320*240 or 640*480) videos that are under 1 Mbps (often less than 500 kbps). These files can normally be watched in real time by most clients.
    The other catch with the route you're going is that some computers simply can't handle 720p content that is encoded in h.264 - they just don't have the power. If you look at podcasters many of them have chosen to go multiple formats in part for this reason - they have video embedded on their websites for watching in real time, small iPod formats for lower-power computers and iPods, and HD formats for platforms like the Apple TV that offer the best quality.

  • Can the ifi work with an iMac?

    Can the Klipsch ifi work for an iMac?
    Hi, I'm buying an iMac and I want great speakers to use with them. I'm very interested in purchasing the klipsch ifi for it, but I'm not sure if they only work with an iPod or with computers as well. Help please?

    When I walk through the local CompUSA, there the ifi is, in the Apple section--all hooked up. I think that is what the i in the name represents, like iPod, iMac, etc.
    Joe

  • Can the next version please allow for the line height to be zero in a text box? I can only go down to .01?

    I want to create a flipping calendar. I had this brilliant idea of putting each date 01 02 03, etc in one text box, with a hard return in between, and then set the line height to zero. Then set the type to appear one paragraph at a time. It would eliminate 20 animation steps. It worked beautifully except that I can't get the line height to set to zero. It will only go to .01. Bleh!
    So please, Can the next version allow for the line height to be zero in a text box?
    Also, separate timelines would be nice instead of one long string so it would be easier to have more than one animation happening at once.
    Just a thought.
    PS - I also noticed it would be nice to have the option of having the first line in a text box dissappear or dissolve or flip out before the next one comes in, rather than just each building in on top of each other.

    In these forums you are just talking to users, not developers. To provide your feedback, in Keynote go to Keynote Menu>Provide Keynote Feedback and send your request that way.

  • Raid ... Exactly what can the RAID do with the TD230

    Hi,
    Have a bunch of TD23013U's and the newer TD23019U's. They both come with RAID, Intel onboard and a LSI9240-8i.
    Q: Out of the box, can the onboard Intel RAID do RAID 5 or is a separate key required for it (part no please and FRU number?).....I take it it can do RAID 0,1 out of the box. Is the key not supposed to come with the unit?
    The LSI RAID card, can it do 0, 1, 5 without any additional key purchase? If it cannot do a raid 5, is it not supposed to part and parcel of a shipped unit?
    Thnx
    Solved!
    Go to Solution.

    Hello Hitesh,
    The TD230 has the following RAID Setup...
    - SATA RAID 0, 1, 10 (Chipset)
    - SATA RAID 5 Key Needed (Chipset Optional)
    - SATA / SAS 0, 1, 10, 5 (HW)

  • What is the best dock with speakers for a new ipod classic

    I need to purchase a new ipod classic and portiable dock with speakers for my organization.  What would be best for a classroom setting?

    I would say Adobe Illustrator, Photoshop, and Indesign are the industry standard in design. But not the most affordable if your are on a tight budget. Photoshop elements has most of major features as the full version of Photoshop but is much cheaper. You can also download a trail version of the Adobe products from Adobe's website for your son to try out.
    Also, look in the app store on the Featured page, there is a link on the right, "Apps for Designers". There you can find several image editing and vector programs he could try. There might be a few layout programs as well.
    I would say if he is serious about getting into graphic design, Adobe products are the way to go. 

  • How can I stream multimedia with VLC for MAC

    I want to stream multimedia with VLC for MAC, but I don't know how? Anyone can give me a help?

    You may not get the answer(s) you are looking for in this forum, which is a forum for the iPod with colour display.
    Try one of the Mac forums.
    http://discussions.apple.com/forum.jspa?forumID=669

  • Can the Ipad2 work with any cellular network?..Celtel Tanzania?

    The Ipad2+wiFi+3g from the Apple store are configured for AT&T or Verizon...If I buy this on line for the store, can I then reconfigure for any celluar network or does that men its locked and tied to these networks only?...I need to use it in the US, UK, Europe, Tanzania and Kenya.

    The iPad 2 is not locked to any carrier.  In the US, you can buy an iPad with an AT&T sim card, or a Verizon model without a sim card.  The AT&T model can be used with any GSM carrier's 3G micro sim.  The Verizon can only be used on a CDMA network.

Maybe you are looking for