Can the 7510 WLAN controller connect via Gig Ethernet not 10G?

Is it possible just to use the 2 x 1Gb connections, not the 10Gb ports?
James

The 1Gb ports are not meant for data connection.
http://www.cisco.com/en/US/products/ps11635/products_tech_note09186a0080b7f141.shtml#pf

Similar Messages

10.6.1: Can't resolve FQDN when connecting via WLAN / Airport Base Station

Hi everybody,
after hours of work and having read many helpful topics in this forum (and other) I've successfully setup a Single Signon Environment for my home office. It's a dual core macmini server running 10.6.1 and only mac clients.
The server is connected via switch to my airport extreme base station. This airport station uses PPPoE to connect to my ISP and it has the DHCP service running, handing out the clients' IP addresses. The server and the switch have all static IP addresses.
My issue is the following:
Whenever I connect via wifi or vpn using my MBP, I am not able to "bind" to the server (via system preferences : users : login setting) using the FQDN. The error is "can't resolve address. -2200" Instead it only finds myserver.local - and then I am able to set up my wifi connected client.
However, when I set up the client with the .local address I am unable to get a kerberos ticket for my users. The ticket viewer says, that it can't resolve the address for myserver.mycompany.private
I was able to get afp or ical to work on my vpn or airport connected clients when I used the server's IP address instead of a domain name - but only with kerberos turned off and with other problems.
I've heard that if everything is configured right, the server should show up in every clients' sidebar with its FQDN and NOT the bonjour name. Right now it shows only the bonjour name - even on the clients connected via Ethernet.
The other strange thing is that when I log into my client system I still have to authenticate with ticket viewer in order to get my kerberos ticket. Usually Single Signon should work with the login window, right?
I really don't know what else to do. I double checked my DNS settings and everything seems ok. I entered the FQDN of the my server in the airport stations' DHCP settings as "LDAP server" - nothing changed...
Do I need to use the server's DHCP service instead of the airport station's DHCP? And if I do this, how to I turn off airport's DHCP? It does not seem to be possible when connected via PPPoE to my ISP.
I am unsure what to do in order to get things to work. Anybody out there who can help?

Hi Davidh and thanks for posting!
I had 3 DNS entries in my client's network settings - one was the server and the other 2 were from my ISP. Removing the ISP's DNS entries and keeping the server DNS IP solved my kerberos issue. Wow!
I'd never thought that it won't work with more than the server given as DNS entries. I'll need to check this with my iPhone later, because I had a similar issue with that device yesterday when trying to connect via VPN.
Thanks very much!
Still one question:
The sidebar of my clients still don't show the server's FQDN - but only its bonjour name. Is this right? I read in another forum that the client's sidebar should show the FQDN if everything is configured right.

My Apple desktop computer, 2.4 GHz Intel duo core, OS 10.6.8, stopped recognizing the WD My Book connected via firewire. It works fine with the USB port so it's not the drive. Help please.

My Apple desktop computer, 2.4 GHz Intel duo core, OS 10.6.8, stopped recognizing the WD My Book connected via firewire. It works fine with the USB port so it's not the drive. Help please?

It can be the bridge. It could need firmware update. or the FW ports may be an issue. LaCie seemed to invent the phrase/tip 'resetting firewire ports' due to the issues with their drive cases.
You can try an SMC Reset.
So far I have avoided name-brand and tend to see them mentioned. Often with a new OS (though you are on 10.6.8, but when 10.6 came out there was a common complaint and thread of users: FW or USB worked but not the other interface).

I just bought an AirPort express. Currently I have a qwest wired router plugged into the back of my computer via an ethernet cable. Can I just unplug the ethernet cable and plug it into the AirPort express, then use the setup utility?

I just bought an AirPort express. Currently I have a qwest wired router plugged into the back of my computer via an ethernet cable. Can I just unplug the ethernet cable and plug it into the AirPort express, then use the setup utility? Most of the discussions involve an existing wireless network. I don't have one.

Correct. That's the way to set up the AirPort Express. After connecting your AirPort Express to the router, open AirPort Utility (in /Applications/Utilities) and follow the steps

Can multiple Airport Expresses be connected via ethernet to an Airport Extreme to extend a single WiFi Network?

I am a big fan of both the Airport Extreme and Airport Express. In my work environment, I need to create a good quality single wireless network around 2 large aircraft hangars and some offices at the perimeters. We have a good quality wired Cat5e ethernet network extended between the buildings and offices now. Is this possible and does it seem like a good practical solution? I think that 4 or 5 Airport expresses would easily provide good wireless coverage in the needed areas.

Can multiple AirPort Expresses be connected via ethernet to an AirPort Extreme to extend a single WiFi Network?
Yes, this will work just fine as long as any individual Ethernet cable run will not exceed much over 330 feet or about 100 meters.

I recently updated to ios 6.1.1 and since then, the photos i am uploading via ios does not show on my timeline or on the newsfeed, but the pictures show in the album. can you help me with it? thanks.

i recently updated to ios 6.1.1 and since then, the photos i am uploading via ios does not show on my timeline or on the newsfeed, but the pictures show in the album. can you help me with it? thanks.

fingers crossed, it appears they are working the bugs out of this update....i was able to post a pic to my newsfeeds/time line this morning....first the picture went into the ios album but within a minute, it appeared on my timeline! im glad ...

Can the new lightning connector connect to my mac for syncing iPod

Can the new lighning connector connect to my mac for syncing ipod/iphone

New iPhone, iPod, and iPad come with a Lightning to USB cable. If you need to buy one it's in the Apple store.

HT4623 I was updating my iPhone 4S when the internet got disconnected. By the time I get connected again it could not restore due to an unknown error code 1611, pls help

was updating my iPhone 4S when the internet got disconnected. By the time I get connected again it could not restore due to an unknown error code 1611, pls help

Try:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
Or it could be an Apple problem and you will have to wait.

I was using a ps3 controller connected via usb as a gamepad when I had Snow Leopard installed - the other day I downloaded Mavericks and now it no longer works. Solutions?

I moved from 10.6.8 (Snow Leopard) to 10.9 (Mavericks). Apple support won't help because it's not their hardware. It's not a playstation controller, it's Spartan brand, and it never connected via bluetooth (it continues to not connect via bluetooth in Mavericks which is fine). I always just plugged it in and it ran because apparently Apple included drivers for it from Snow Leopard onward. However, in Mavericks that's not the case, as when I plug it in nothing picks it up, and when I tried to connect it via bluetooth I would enter the pairing code and then it wouldn't pair. Anyone got any thoughts/ideas?

Thanks for no help. Such a supportive community. I figured it out on my own. I can only connect it via usb cable (which I'm happy with) and in order to do that I had to go through the bluetooth connection steps for some reason. It doesn't show up as paired but I did the steps outlined in this video - http://www.youtube.com/watch?v=Efk77f6d98Y -, plugged the controller in via usb cable and then it worked.

Can I share my internet connection via wifi AND use my wireless printer at the same time?

Not completely familiar with wifi capabilities. I have this new setup in my office. I want to share my iMac internet connection via wifi so I can text and check emails using my iPhone (no cell service inside the building). Which works fine. However, I now cannot print wirelessly to my HP printer (LaserJet Pro 400 color). Once Internet sharing is off, I can print just fine. Any other wireless options, or just go get a long USB cable?

Hi,
It is not a multitasking printer, other devices may keep it therefore the best option in this case: connect it to your wireless router and all devices which are conntected to this router can sahre the printer.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Can't Connect Via Wired Ethernet Broadband Connection

Replaced a Westell 7500 with a DSL-N10 because of constant disconnects. The Westell had no problem connecting via the wired ethernet broadband connection which I switch to when I need to improve buffering for videos. The DSL-N10 won't connect and reports "Error 651 Modem reported a problem". I reconnected the Westell to determine if there was a problem but it connected to the wired connection immediately. Question is do I need to change or add a setting in the DSL-N10 to get a wired connection or is this something I need to conract Verizon support about?

Perhaps this will help you
http://technophilia.madharasan.com/610/how-to-how-to-fix-connecting-through-wan-miniport-pppoe-error
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

VPN clients can connect via SSTP but not IKEv2 due to error 808

I have a Windows Server 2012 R2 with RRAS configured to allow SSTP / IKEv2 VPN connections. I'm using an external certificate for server authentication and the client authentication is done via domain username/password (Protected EAP). The clients can
connect successfully when using SSTP, but if IKEv2 is selected, then the following error is displayed:
Error 808:
The network connection between your computer and the VPN server could not be established because the remote server refused the connection. This is typically caused by a mismatch between the server's configuration and your connection settings. Please
contact the remote server's Administrator to verify the server configuration and your connection settings.
My external certificate has the Server Authentication EKU but not the IP security IKE intermediate, however it's the only
certificate installed, so I believe the certificate is OK.
Any ideas on what is causing the error?
Thank you.
Ricardo Costa

Hi,
What NAT device you are using? You must configure the IKEv2 related protocol on your NAT device too. For example if you are using the Cisco® NAT device you must
enable the IKEv2 support on the outside interface:
Enabling IKE on the Outside Interface
You must enable IKE on the interface that terminates the VPN tunnel. Typically this is the outside, or public interface. To enable IKEv1 or
IKEv2, use the crypto ikev1 | ikev2 enable command from global configuration mode:
=================================================
crypto ikev1 | ikev2 enable interface-name
For example:
hostname(config)# crypto ikev1 enable outside
=================================================
The related third party information:
Configuring IPSec and ISAKMP
http://www.cisco.com/c/en/us/td/docs/security/asa/asa84/configuration/guide/asa_84_cli_config/vpn_ike.html#wp1042302
You can refer the following KB to enable the RRAS logging.
RRAS: Logging should be enabled on the RRAS server
http://technet.microsoft.com/zh-cn/library/ee922651(v=ws.10).aspx
Hope this helps.
*** This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does
not control these sites and has not tested any software or information found on these sites; therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers
in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet. ***
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Can connect via wifi but not by ethernet cable?

Hi,
I'm a bit confused here.
I have an airport express which works fine and I just bought an airport extreme.
The airport extreme is connected to the modem by an ethernet cable and the airport express is connected by ethernet cable to the airport extreme.
I am able to connect to the airport express wifi with all the computers but I'm unable to connect any computers to the airport extreme via ethernet cable.
Both airport express and extreme are lit up green and they both appear on the Airport Utility.
The airport extreme setting is set so that it is joining the airport express' network. That's the only way the light shows up green instead of flicking amber.
I've looked at the settings over and over again and am not sure/don't understand why this is? All I know is that I've got the wifi working! The ethernet connection is not workin for both PCs and Mac.
Any help is much appreciated!

The airport extreme is connected to the modem by an ethernet cable
On the WAN plug, right?
and the airport express is connected by ethernet cable to the airport extreme.
Why? You don't need AirPort Express anymore, unless you have signal weakness in your home.
If that is the case, you can use the AirPort Express to extend the range of the new AirPort Extreme WiFi network with WDS (Wireless Distribution System).
http://support.apple.com/kb/HT1515?viewlocale=en_US

Can connect via ODBC but not via SQL Developer?

Hi, all.
My setup:
Windows XP Pro
JDK 1.6
SQL Developer 2.1.1.64.45
I'm attempting to connect to an Oracle DB using OS authentication and trying hand-entry of the host and SID; and also trying my TNS file. When I attempt to connect via SQL Developer, I get the following error:
"Status : Failure -Test failed: ORA-01017: invalid username/password; logon denied."
When I attempt this same connection, however, using ODBC and Access, I can get right in and see the tables.
What can I try in order to get SQL Developer working correctly?
Thanks,
IVR Avenger

I'm not really familiar with connections Using OS authentication, but if OCI+TNS based connections work you could try to activate OCI connections by selecting
Preferences -> Database -> Advanced -> Use OCI/Thick Driverand then use the TNS connection type when creating your connection.
It should work well even with the thin driver but i cannot help you in this case because i've never had to use this kind of authentication.

Airport admin can see Base Station, but only via direct ethernet connection

After resetting my snow (dual ethernet) base station, everything went well with the Airport Admin Utility reconfiguration. But after unplugging the ethernet cable between my computer and the base station, I'm not able to detect the base station wirelessly. Searching for "other" networks won't work. I've tried changing passwords, base station names, location names, network names, using the hex password. I hope I'm missing something obvious. Thanks in advance for any help!

Yes, the wireless network name (currently Apple Network xxxxxx), does not appear in the list. My iBook and Snow Leopard iMac cannot detect it, nor can two iPod Touches in the house. Nor can our Wii. All of which used to before all this. All these are able to detect other networks -- basically, all of my neighbors and then some that come and go.
I have not tried bringing the base station to another building. That’s a good idea.
I have tried http://support.apple.com/kb/TA20683 and kept getting stuck at the configuration stage -- where it seems to reset the ABS, but after which the ABS does not appear in the Admin Utility window. Finally, after many, many attempts at a hard reset, I’m almost positive the whole config & software upload took. My only evidence is that with the ABS still connected to my iBook (OS X 14.11 running Admin Utility 4.25) I can finally double click on “Base Station” and see lots of setting options, the correct Apple Airport ID, etc. In other words, as you guessed, I can see “(and, presumably, change) the wireless network name in the AirPort tab of AirPort Admin Utility (the default is something like "Apple Network xxxxxx") when connected via Ethernet.”
What led to this? It all started when I was trying to get our Wii on to our wireless network. But the Wii wouldn’t log on. It gets foggy after that (I’ve tried so many things, I’ve lost track of the initial steps creating the problem). I might have tried changing channels or something from my Snow Leopard computer, having forgotten that my Snow Leopard computer can’t administer my dual ethernet ABS. It’s possible it really started with turning on and off my DSL modem, which forced me to reset my DSL password with ATT.
Come to think of it, that might have been how this all started. After turning my DSL modem on again, ATT wanted me to download special software for me to reset my password. That wasn’t working (whatever it was would never load. But, I found a way to do it online. Otherwise, my browser kept spitting me back to ATTs password creation page.) By the time I went to my iBook to get into my ABS, remembering that was how I needed to tinker with it, to get back to the original Wii issue, I had lost all connections to my ABS.
Until now, where I can at least see the ABS again in the Airport Admin Utility -- via ethernet connection only.

Can the 7510 WLAN controller connect via Gig Ethernet not 10G?

Similar Messages

Maybe you are looking for